Development and in vitro evaluation of floating rosiglitazone maleate microspheres

Background: Various approaches have been used to retain the dosage form in stomach as a way of increasing the gastric residence time, including floatation systems; high-density systems; mucoadhesive systems; magnetic systems; unfoldable, extensible, or swellable systems; and superporous hydrogel systems. Aim?: The objective of this study was to prepare and evaluate floating microspheres of rosiglitazone maleate for the prolongation of gastric residence time. Method: The microspheres were prepared by solvent diffusion–evaporation method using ethyl cellulose and hydroxypropylmethylcellulose. A full factorial design was applied to optimize the formulation. Results: Preliminary studies revealed that the polymer:drug ratio, concentration of polymer, and stirring speed significantly affected the characteristics of microspheres. The optimum batch exhibited a prolonged drug release, remained buoyant for >12 hours, high entrapment efficiency, and particle size in the order of 350 μm. Conclusion: The results of 32 full factorial design revealed that the concentration of ethylcellulose 7 cps (X₁) and stirring speed (X₂) significantly affected drug entrapment efficiency, percentage release after 8 h and particle size of microspheres.     

Cuboidal lipid polymer nanoparticles of rosuvastatin for oral delivery

The present work aimed to develop and characterize sustained release cuboidal lipid polymeric nanoparticles (LPN) of rosuvastatin calcium (ROS) by solvent emulsification-evaporation process. A three factor, two level (2³) full-factorial design was applied to study the effect of independent variables, i.e. amount of lipid, surfactant and polymer on dependent variables, i.e. percent entrapment efficiency and particle size. Optimized formulations were further studied for zeta potential, TEM, in vitro drug release and ex vivo intestinal permeability. Cuboidal nanoparticles exhibited average particle size 61.37?±?3.95?nm, entrapment efficiency 86.77?±?1.27% and zeta potential ?6.72?±?3.25?mV. Nanoparticles were lyophilized to improve physical stability and obtain free-flowing powder. Effect of type and concentration of cryoprotectant required to lyophilize nanoparticles was optimized using freeze-thaw cycles. Mannitol as cryoprotectant in concentration of 5-8% w/v was found to be optimal providing zeta potential ?20.4?±?4.63?mV. Lyophilized nanoparticles were characterized using FTIR, DSC, XRD and SEM. Absence of C=C and C–F aromatic stretch at 1548 and 1197?cm^?1, respectively, in LPN indicated coating of drug by lipid and polymer. In vitro diffusion of ROS using dialysis bag showed pH-independent sustained release of ROS from LPN in comparison to drug suspension. Intestinal permeability by non-everted gut sac model showed prolonged release of ROS from LPN owing to adhesion of polymer to mucus layer. In vivo absorption of ROS from LPN resulted in 3.95-fold increase in AUC_0–last and 7.87-fold increase in mean residence time compared to drug suspension. Furthermore modified tyloxapol-induced rat model demonstrated the potential of ROS-loaded LPN in reducing elevated lipid profile.     

Preparation and Optimization of Dry PLGA Nanoparticles by Spray Drying Technique

The aim of this article was to evaluate the potential of poly lactide-coglycolide (PLGA) nanoparticles (NPs) as carriers for controlling release of doxorubicin (DOX) via a spray drying technique. The challenge was to entrap a hydrophilic molecule into a lipophilic core molecule of PLGA. To achieve this objective, we modified conventional approach of drug loading to spray drying technique. The eight formulations of nanoparticles were prepared by modified double emulsion and solvent evaporation technique followed by spray drying using 2³ factorial designs. PLGA (A) and PVA (B) and stirring speed (C) were used as independent variables where particle size (Y₁), entrapment efficiency (Y₂) and percentage of drug release at the 32 hour (Y₃) were taken as dependant variables. The results showed that the method is easy and efficient for the entrapment of the drug as well as the formation of spherical nanoparticles. This modification improved DOX entrapment efficiency relative to controls real loadings up to 40%. The in vitro release studies indicated the DOX loaded PLGA nanoparticles provide controlled drug release over a period of 32 h. Hence, this investigation demonstrated the potential of the experimental design in understanding the effect of the formulation variables on the quality of DOX-PLGA nanoparticles.     

Enteric-coated epichlorohydrin crosslinked dextran microspheres for site-specific delivery to colon

Abstract

Enteric-coated epichlorohydrin crosslinked dextran microspheres containing 5-Fluorouracil (5-FU) for colon drug delivery was prepared by emulsification-crosslinking method. The formulation variables studied includes different molecular weights of dextran, volume of crosslinking agent, stirring speed, time and temperature. Dextran microspheres showed mean entrapment efficiencies ranging between 77 and 87% and mean particle size ranging between 10 and 25?µm. About 90% of drug was released from uncoated dextran microspheres within 8?h, suggesting the fast release and indicated the drug loaded in uncoated microspheres, released before they reached colon. Enteric coating (Eudragit-S-100 and Eudragit-L-100) of dextran microspheres was performed by oil-in-oil solvent evaporation method. The release study of 5-FU from coated dextran microspheres was complete retardation in simulated gastric fluid (pH 1.2) and once the coating layer of enteric polymer was dissolved at higher pH (7.4 and 6.8), a controlled release of the drug from the microspheres was observed. Further, the release of drug was found to be higher in the presence of dextranase and rat caecal contents, indicating the susceptibility of dextran microspheres to colonic enzymes. Organ distribution and pharmacokinetic study in albino rats was performed to establish the targeting potential of optimized formulation in the colon.     

Facile development,characterization, and optimization of new metformin-loaded nanocarrier system for efficient colon cancer adjunct therapy

Purpose: Metformin hydrochloride (MF) repurposing as adjuvant anticancer therapy for colorectal cancer (CRC) proved effective. Several studies attempted to develop MF-loaded nanoparticles (NPs), however the entrapment efficiency (EE%) was poor. Thus, the present study aimed at the facile development of a new series of chitosan (CS)-based semi-interpenetrating network (semi-IPN) NPs incorporating Pluronic^® nanomicelles as nanocarriers for enhanced entrapment and sustained release of MF for efficient treatment of CRC.

Methods: The NPs were prepared by ionic gelation and subsequently characterized using FTIR, DSC, TEM, and DLS. A full factorial design was also adopted to study the effect of various formulation variables on EE%, particle size, and zeta-potential of NPs.

Results: NPs had a spherical shape and a mean particle size ranging between 135 and 220?nm. FTIR and DSC studies results were indicative of successful ionic gelation with the drug being dispersed in its amorphous form within CS-Pluronic^® matrix. Maximum EE% reaching 57.00?±?12.90% was achieved using Pluronic^®-123 based NPs. NPs exhibited a sustained release profile over 48?h. The MF-loaded NPs sensitized RKO CRC cells relative to drug alone.

Conclusion: The reported results highlighted the novel utility of the developed NPs in the arena of colon cancer treatment.     

Optimization studies on floating multiparticulate gastroretentive drug delivery system of famotidine

The objective of this study was to optimize floating microballoons of famotidine by the emulsion solvent diffusion technique using central composite design. Formulations F1-F15 were prepared using three independent variables (pH of medium, drug: Eudragit S100 ratio and ethanol : dichloromethane ratio) and evaluated for dependent variables (shape, percentage buoyancy, and encapsulation). The optimized formulation F9 was fractionated and a polymer combination of (Eudragit S100 : Eudragit L100-55, 9.5:0.5) resulted in microballoons that exhibited zero order release (94.73%) with 84.20% buoyancy at the end of the eighth hour when studied in the mesh-designed modified USP type II apparatus.     

Evaluation and Optimization of Preparative Variables for Controlled-Release Floatable Microspheres Prepared by Poor Solvent Addition Method

The aim of this study was to evaluate and optimize preparative parameters for floatable theophylline microspheres prepared by the emulsion–solvent evaporation method. A three-factor three-level Box–Behnken design was employed using amount of poor solvent, temperature-increase rate and drug loading as independent factors, and percentage floating at 3 h and time required for 50% drug release as dependent variables. Simultaneous optimization of the parameters for maximum buoyancy and desirable drug release was conducted using a partitioned artificial neural network. A microsphere using 27.6% of drug loading, 0.29°C/min of temperature-increase rate, and 1.7 mL of poor solvent was identified for maximizing buoyancy and sustaining drug release.     

Evaluation and optimization of preparative variables for controlled-release floatable microspheres prepared by poor solvent addition method

The aim of this study was to evaluate and optimize preparative parameters for floatable theophylline microspheres prepared by the emulsion-solvent evaporation method. A three-factor three-level Box-Behnken design was employed using amount of poor solvent, temperature-increase rate and drug loading as independent factors, and percentage floating at 3 h and time required for 50% drug release as dependent variables. Simultaneous optimization of the parameters for maximum buoyancy and desirable drug release was conducted using a partitioned artificial neural network. A microsphere using 27.6% of drug loading, 0.29 degrees C/min of temperature-increase rate, and 1.7 mL of poor solvent was identified for maximizing buoyancy and sustaining drug release.     

Gellan gum microspheres crosslinked with trivalent ion: effect of polymer and crosslinker concentrations on drug release and mucoadhesive properties

Gellan gum microspheres were obtained by ionotropic gelation technique, using the trivalent ion Al³⁺. The percentage of entrapment efficiency ranged from 48.76 to 87.52% and 2² randomized full factorial design demonstrated that both the increase of polymer concentration and the decrease of crosslinker concentration presented a positive effect in the amount of encapsulated drug. Microspheres size and circularity ranged from 700.17 to 938.32?μm and from 0.641 to 0.796?μm, respectively. The increase of polymer concentration (1–2%) and crosslinker concentration (3–5%) led to the enlargement of particle size and circularity. However, the association of increased crosslinker concentration and reduced polymer content made the particles more irregular. In vitro and ex vivo tests evidenced the high mucoadhesiveness of microspheres. The high liquid uptake ability of the microspheres was demonstrated and the pH variation did not affect this parameter. Drug release was pH dependent, with low release rates in acid pH (42.40% and 44.93%) and a burst effect in phosphate buffer pH (7.4). The Weibull model had the best correlation with the drug release data, demonstrating that the release process was driven by a complex mechanism involving the erosion and swelling of the matrix or by non-Fickian diffusion.     

Development of novel gastroretentive drug delivery system of gliclazide: hollow beads

Aim: The current communication deals with the development of hollow floating beads of gliclazide. The primary effect of this drug is to potentiate glucose-stimulated insulin release from pancreatic islet-β-cells by induction of a decrease in potassium efflux from these cells. Because of the poor aqueous solubility, its absorption is limited. Thus, an attempt was made to improve its release profile.

Methods: The hollow drug-loaded alginate beads in combination with low methoxyl pectin and hydroxypropylmethylcellulose (HPMC) were prepared by a simple ionotropic gelation method. The beads were evaluated for particle size and morphology using optical microscopy and scanning electron microscopy (SEM), respectively. Mucoadhesion test was done using goat stomach mucosal membrane. Release characteristics of the gliclazide-loaded hollow beads were studied in 0.1?N HCl (pH 1.2) and phosphate buffer (pH 5.8).

Results: The developed beads were spherical in shape with hollow internal structure and had a particle size in the range of 0.730?±?0.05 to 0.890?±?0.03?mm. The incorporation efficiency of alginate -pectin beads was higher than alginate -HPMC beads. The Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction analysis showed stable character of drug in the drug-loaded hollow beads and revealed the absence of any drug -polymer interactions. The beads remained buoyant for more than 12?h. The drug release from beads followed Fickian diffusion with swelling.

Conclusion: The preliminary results of this study suggest that the developed beads containing gliclazide could enhance drug entrapment efficiency, reduce the initial burst release and modulate the drug release.     

Preparation and optimization of doxorubicin-loaded albumin nanoparticles using response surface methodology

Background: The objective of this work was to optimize the preparation of doxorubicin-loaded albumin nanoparticles (Dox-A-Nps) through desolvation procedures using response surface methodology (RSM). A central composite design (CCD) for four factors at five levels was used in this study.

Method: Albumin nanoparticles were prepared through a desolvation method and were optimized in the aid of CCD. Albumin concentration, amount of doxorubicin, pH values, and percentage of glutaraldehyde were selected as independent variables, particle size, zeta potential, drug loading, encapsulation efficiency, and nanoparticles yield were chosen as response variables. RSM and multiple response optimizations utilizing a quadratic polynomial equation were used to obtain an optimal formulation.

Results: The optimal formulation for Dox-A-Nps was composed of albumin concentration of 17?mg/ml, amount of doxorubicin of 2?mg/ml, pH value is 9 and percentage of glutaraldehyde of 125% of the theoretic amount, under which the optimized conditions gave rise to the actual average value of mean particle size (151?±?0.43?nm), zeta potential (?18.8?±?0.21 mV), drug loading efficiency (21.4?±?0.70%), drug entrapment efficiency (76.9?±?0.21%) and nanoparticles yield (82.0?±?0.34%). The storage stability experiments proved that Dox-A-Nps stable in 4°C over the period of 4 months. The in vitro experiments showed a burst release at the initial stage and followed by a prolonged release of Dox from albumin nanoparticles up to 60?h.

Conclusions: This study showed that the RSM-CCD method could efficiently be applied for the modeling of nanoparticles, which laid the foundation of the further research of immuno nanoparticles.     

Ciprofloxacin Liposomes as Vesicular Reservoirs for Ocular Delivery: Formulation,Optimization, and In Vitro Characterization

Management of extraocular diseases is mainly limited by the inability to provide long-term drug delivery without avoiding the systemic drug exposure and/or affecting the intraocular structures and poor availability of drugs, which may be overcome by prolonging the contact time with the ocular system, for instance with liposomes. Development and optimization of reverse phase evaporation ciprofloxacin (CPF) HCl liposomes for ocular drug delivery was carried out using a 2⁵ full factorial design based on five independent variables. The effects of the studied parameters on drug entrapment efficiency (EE), particle size, and percentage of drug released after 1 and 10 h were investigated. The results obtained pointed out that the molar concentration of cholesterol was the predominant factor that increased the EE% of the drug and the particle size responses. The percentage of drug released after 1 h was significantly controlled by the initial CPF concentration while that after 10 h was controlled by molar cholesterol concentration. The designed liposomes had average particle sizes that ranged from 2.5 to 7.23 μm. In addition, liposomes revealed a fast release during the first hour followed by a more gradual drug release during the 24-h period according to Higuchi diffusion model.     

Solid lipid nanoparticles of ondansetron HCl for intranasal delivery: development, optimization and evaluation

The present investigation deals with the development and statistical optimization of solid lipid nanoparticles (SLNs) of ondansetron HCl (OND) for intranasal (i.n.) delivery. SLNs were prepared using the solvent diffusion technique and a 2(3) factorial design. The concentrations of lipid, surfactant and cosurfactant were independent variables in this design, whereas, particle size and entrapment efficiency (EE) were dependent variables. The particle size of the SLNs was found to be 320-498?nm, and the EE was between 32.89 and 56.56?%. The influence of the lipid, surfactant and cosurfactant on the particle size and EE was studied. A histological study revealed no adverse response of SLNs on sheep nasal mucosa. Transmission electron microscopic analysis showed spherical shape particles. Differential scanning calorimetry and X-ray diffraction studies indicated that the drug was completely encapsulated in a lipid matrix. In vitro drug release studies carried out in phosphate buffer (pH 6.6) indicated that the drug transport was of Fickian type. Gamma scintigraphic imaging in rabbits after i.n. administration showed rapid localization of the drug in the brain. Hence, OND SLNs is a promising nasal delivery system for rapid and direct nose-to-brain delivery.     

Preparation,characterization, and in vivo evaluation of insulin-loaded PLA–PEG microspheres for controlled parenteral drug delivery

Aim: The aim of this study was to prepare insulin-loaded poly(lactic acid)–polyethylene glycol microspheres that could control insulin release at least for 1 week and evaluate their in vivo performance in a streptozotocin-induced diabetic rat model. Methods: The microspheres were prepared using a water-in-oil-in-water double emulsion solvent evaporation technique. Different formulation variables influencing the yield, particle size, entrapment efficiency, and in vitro release profiles were investigated. The pharmacokinetic study of optimized formulation was performed with single dose in comparison with multiple dose of Humulin® 30/70 as a reference product in streptozotocin-induced diabetic rats. Results: The optimized formulation of insulin microspheres was nonporous, smooth-surfaced, and spherical in structure under scanning electron microscope with a mean particle size of 3.07 ×μm and entrapment efficiency of 42.74% of the theoretical amount incorporated. The in vitro insulin release profiles was characterized by a bimodal behavior with an initial burst release because of the insulin adsorbed on the microsphere surface, followed by slower and continuous release corresponding to the insulin entrapped in polymer matrix. Conclusions: The optimized formulation and reference were comparable in the extent of absorption. Consequently, these microspheres can be proposed as new controlled parenteral delivery system.     

Chitosan Nanoparticles for Prolonged Delivery of Timolol Maleate

Timolol maleate-loaded chitosan (CS) nanoparticles were prepared by desolvation method. Experimental variables such as molecular weight of CS and amount of crosslinking agent were varied to study their effect on drug entrapment efficiency, size and release rates of nanoparticles. Chemical stability of timolol maleate (TM) and crosslinking of CS were confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetric studies were performed on drug-loaded nanoparticles to investigate crystalline nature of the drug after entrapment. Results indicated amorphous dispersion of drug in the polymer matrix. Scanning electron microscopy revealed irregularly shaped particles. Mean particle size of nanoparticles ranged between 118 and 203 nm, while zeta potential ranged between +17 and +22 mV. Entrapment efficiency of nanoparticles ranged between 47.6 and 63.0%. In-vitro release studies were performed in phosphate buffer saline of pH 7.4. A slow release of TM up to 24 h was observed. A 3² full factorial design was employed and second-order regression models were used to study the response (% drug release at 4 h). Release data as analyzed by an empirical relationship suggested that drug release deviated from the Fickian trend.     

Optimization of acyclovir oral tablets based on gastroretention technology: factorial design analysis and physicochemical characterization studies

The purpose of this research was to prepare a floating drug delivery system of acyclovir. Floating matrix tablets of acyclovir were developed to prolong gastric residence time and increase its bioavailability. The tablets were prepared by direct compression technique, using polymers such as hydroxypropylmethylcellulose 4000, Compritol 888. Sodium bicarbonate was used as a gas-generating agent. A 32 factorial design using the Design Expert Software (version 7.1.6) was applied to optimize the drug release profile systematically. The amounts of hydroxypropylmethylcellulose 4000 (X?) and Compritol 888 (X?) were selected as independent variables and the percentage drug released in 1 (Q?), 6 (Q?), and 12 (Q??) h as dependent variables. The results of factorial design indicated that a high level of both hydroxypropylmethylcellulose 4000 (X?) and Compritol 888 (X?) favors the preparation of floating controlled-release of acyclovir tablets. Also, a good correlation was observed between predicted and actual values of the dependent variables chosen for the study. By fitting the data into zero-order, first-order, and Higuchi models, we concluded that the release followed Higuchi diffusion kinetics. Storage of the prepared formulations at 40°C/75% relative humidity for 3 months showed no significant change in drug release profiles and buoyancy of the floating tablets. We can conclude that a combination of hydroxypropylmethylcellulose 4000, Compritol 888, and sodium bicarbonate can be used to increase the gastric residence time of the dosage form up to 12?h. These floating tablets seem to be a promising gastroretentive drug delivery system.     

Oral solid compritol 888 ATO nanosuspension of simvastatin: optimization and biodistribution studies

The purpose of the present investigation was to develop solid lipid nanoparticles (SLNs) of simvastatin in order to enhance its oral bioavailability by minimizing its first-pass metabolism. To achieve our goal, SLNs were prepared by solvent injection technique and optimized by 2(3) full factorial experimental design using Design Expert software. The SLN formulations were optimized for amount of compritol, concentration of poloxamer, and volume of acetone in order to achieve desired responses of particle size, entrapment efficiency (EE), and cumulative drug release (CDR). Response surface plots were constructed to study the influence of each variable on each response and the interactions between any two variables were also analyzed. Formulation F(10) with particle size of 271.18?nm, % EE of 68.16% and % CDR of 76.23%, and highest desirability value of 0.645 was selected as optimized formulation. The optimized formulation was evaluated for biodistribution and pharmacokinetics by technetium-99m (Tc-99m) radiolabeling technique in mice. The relative bioavailability of simvastatin from optimized SLNs was found to be 220%, substantiating the protective action of SLNs against liver metabolism. However, though the drug initially bypassed the liver metabolism, simvastatin continuously entered in liver to exert its therapeutic action that was evidenced by biodistribution study.     

Multiparticulate Drug Delivery System for the Treatment of Diabetes Mellitus: In Vitro and In Vivo Evaluation

Biodegradable microspheres of poly(?)caprolactone were prepared by solvent evaporation method for controlled release of repaglinide. The prepared microspheres were spherical in shape having smooth surface. The average diameter was in the range of 24 to 31.04 µm. Drug entrapment efficiency of the prepared microspheres was in the range of 68.81% to 79.30%. Differential scanning calorimetry and x-ray diffraction analyses indicated the amorphous dispersion of drug in the microspheres. The drug release was continued up to 24 h depending upon the formulation variables; drug release was slow from the microspheres which were prepared with higher concentration of polymer and as the initial drug loading was increased, the drug release was also increased. A non-Fickian transport was the mechanism of drug release for all the microspheres. The in vivo anti-diabetic activity performed on steptozotocin induced rats indicated that the plain repaglinide has shown maximum percentage of reduction in blood glucose at the end of 3 h and then the percentage of reduction in blood glucose was decreased. While in case of rats treated with PCL5 microspheres, the percentage of reduction in glucose level was slow as compared to plain repaglinide within 3 h, but it was gradually increased to 74.86% at the end of 24 h.     

Statistical evaluation of influence of xanthan gum and guar gum blends on dipyridamole release from floating matrix tablets

The present investigation explored the use of xanthan gum and guar gum for development of floating drug delivery system of dipyridamole using factorial design approach. The content of polymer blends (X(1)) and ratio of xanthan gum to guar gum (X(2)) were selected as independent variables. The diffusion exponent (n), release rate constant (k), percentage drug release at 1 hr (Q(1)) and 6 hr (Q(6)) were selected as dependent variables. Tablets of all batches had desired buoyancy characteristics. Multiple regression analysis with two way ANOVA revealed that both the factors had statistically significant influence on the response studied (p<0.05). Results of Tukey test showed the relative contribution of each level of different factors for the response studied. It was concluded that the ratio of xanthan to gaur gum had equal or dominant role as controlling factor on kinetics of drug release compared to content of polymer blends.     

Chitosan nanoparticles for prolonged delivery of timolol maleate

Timolol maleate-loaded chitosan (CS) nanoparticles were prepared by desolvation method. Experimental variables such as molecular weight of CS and amount of crosslinking agent were varied to study their effect on drug entrapment efficiency, size and release rates of nanoparticles. Chemical stability of timolol maleate (TM) and crosslinking of CS were confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetric studies were performed on drug-loaded nanoparticles to investigate crystalline nature of the drug after entrapment. Results indicated amorphous dispersion of drug in the polymer matrix. Scanning electron microscopy revealed irregularly shaped particles. Mean particle size of nanoparticles ranged between 118 and 203 nm, while zeta potential ranged between +17 and +22 mV. Entrapment efficiency of nanoparticles ranged between 47.6 and 63.0%. In-vitro release studies were performed in phosphate buffer saline of pH 7.4. A slow release of TM up to 24 h was observed. A 3² full factorial design was employed and second-order regression models were used to study the response (% drug release at 4 h). Release data as analyzed by an empirical relationship suggested that drug release deviated from the Fickian trend.