Analyses of nano-crystalline LiCoVO4 prepared by solvothermal reaction

LiOH·H₂O, Co(NO₃)₂·6H₂O and NH₄VO₃ were used to prepare nano-crystalline LiCoVO₄ by 150 °C solvothermal reaction in isopropanol for 10–360 h and subsequent calcination at 300–500 °C for 6 h. XRD, TEM and selected area electron diffraction (SAED) revealed the presence of nano-crystalline LiCoVO₄ with inverse spinel structure. The V–O stretching vibration modes of VO₄ tetrahedrons were detected by FTIR over the range 617–835 cm^− 1 and by Raman spectrometer at 805.7 and 783.1 cm^− 1. Co, V and O were detected by EDX. TGA of solvothermal products shows weight loss due to the evaporation and decomposition processes at 40–648 °C.     

Growth and optical characterizations of (Ba0.32Sr0.68)5Nb4O15 crystal

(Ba_0.32Sr_0.68)₅Nb₄O₁₅ crystal with sizes of Ø 17 × 35 mm was grown successfully by Czochralski technique method. The thermal anisotropy was discussed. The principal coefficients of thermal expansion along (100), (010), (001) directions were precisely measured to be 1.308 × 10^− 5, 1.288 × 10^− 5, 1.478 × 10^− 5 K^− 1, respectively. Its optical transparency range has been measured and found to span from 323 to 5500 nm. The bands present in the IR spectra were identified and assigned to the corresponding vibration modes of NbO₆ anions.     

Microstructures and thermoelectric properties of p-type pseudo-binary AgxBi0.5Sb1.5−xTe3 (x = 0.05–0.4) alloys prepared by cold pressing

The p-type pseudo-binary Ag_xBi_0.5Sb_1.5−xTe₃ (x = 0.05–0.4) alloys were prepared by cold pressing. The thermal conductivities (κ) were calculated from the values of heat capacities, densities and thermal diffusivities measured, and range approximately from 0.66 to 0.56 (W K^− 1 m^− 1) for the Ag_xBi_0.5Sb_1.5−xTe₃ alloy with molar fraction x being 0.4. Combining with the electrical properties obtained in the previous study, the maximum dimensionless figure of merit ZT of 1.1 was obtained at the temperature of 558 K.     

Preparation of SrAl2O4: Eu, Dy nanometer phosphors by detonation method

SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer phosphors were synthesized by detonation method. The particle morphology and optical properties of detonation soot that was heated at different temperatures (600–1100 °C) had been studied systematically by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Results indicated SrAl₂O₄: Eu²⁺, Dy³⁺ nanometer powders in monoclinic system (a = 8.442, b = 8.822, c = 5.160, β = 93.415) can be synthesized by detonation method, when detonation soot was heated at 600–800 °C. The particle size of SrAl₂O₄: Eu²⁺, Dy³⁺ is 35 ± 15 nm. Compared with the solid-state reaction and sol-gel method, synthesis temperature of the detonation method is lower about 500 and 200 °C respectively. After being excited under UN lights, detonation soot and that heated at 600–1100 °C can emit a green light.     

Mechanical and dielectric properties of porous Si3N4–SiO2 composite ceramics

In order to prepare a structural/functional material with not only higher mechanical properties but also lower dielectric constant and dielectric loss, a novel process combining oxidation-bonding with sol–gel infiltration-sintering was developed to fabricate a porous Si₃N₄–SiO₂ composite ceramic. By choosing 1250 °C as the oxidation-bonding temperature, the crystallization of oxidation-derived silica was prevented. Sol–gel infiltration and sintering process resulted in an increase of density and the formation of well-distributed micro-pores with both uniform pore size and smooth pore wall, which made the porous Si₃N₄–SiO₂ composite ceramic show both good mechanical and dielectric properties. The ceramic with a porosity of 23.9% attained a flexural strength of 120 MPa, a Vickers hardness of 4.1 GPa, a fracture toughness of 1.4 MPa m^1/2, and a dielectric constant of 3.80 with a dielectric loss of 3.11 × 10⁻³ at a resonant frequency of 14 GHz.     

Synthesis and characterization of nanocrystalline manganese pyrophosphate Mn2P2O7

Mn₂P₂O₇ polyhedral particles were synthesized by simple and cost-effective method using manganese nitrate hydrate and phosphoric acid in the presence of nitric acid with further calcinations at the temperature of 800 °C. The crystallite size obtained from X-ray line broadening is 31 ± 13 nm for the Mn₂P₂O₇. The X-ray diffraction and SEM results indicated that the synthesized nanoparticles have only the structure without the presence of any other phase impurities. The FT-IR and FT-Raman spectra show characteristic bands of the P₂O₇⁴⁻ anion. The UV–Vis–NIR spectrum confirms the octahedral coordination of Mn²⁺ ion.     

Physical properties of transparent conducting Cd–Te–In–O thin films: Outlining a thermodynamic system for transparent conducting oxides

Cd–Te–In–O thin films are grown by pulsed laser deposition using a composite target of CdTe powder embedded in an indium matrix. Oxygen pressures range from 2.00 to 6.67 Pa at a substrate temperature of 420 °C. The structure, optical transmission and sheet resistance of the films are measured. Substitutional compounds with In_2 − 2x(Cd,Te)_2xO₃ stoichiometry are found at high oxygen pressures. A ternary phase diagram of the CdO–In₂O₃–TeO₂ system shows the relationship between the structure and the stoichiometry of the films. To evaluate film performance, a figure of merit is proposed based on the relationship between the integral photonic flux and the sheet resistance. The best figure of merit values corresponds to a sample prepared at 3.8 Pa O₂ that consists of (In₂O₃)_0.3(CdTe₂O₅)_0.7 and exhibits an optical band gap of 3.0 eV. This sample is a suitable substrate for electrodeposition due to its good electrochemical stability.     

Syntheses of Mn3O4 and LiMn2O4 nanoparticles by a simple sonochemical method

Mn₃O₄ and LiMn₂O₄ nanoparticles were prepared by a simple sonochemical method which is environmentally benign. First, Mn₃O₄ nanoparticles were prepared by reacting MnCl₂ and NaOH in water at room temperature through a sonochemical method, operated at 20 kHz and 220 W for 20 min. Second, LiOH was coated onto the resulting Mn₃O₄ under the same sonochemical conditions as above. The thickness of coated LiOH on Mn₃O₄ obtained from the reaction ratio of 3:1 between LiOH and Mn₃O₄ was about 4.5–5.5 nm range. Then, by heating those LiOH-coated Mn₃O₄ particles at the relatively low temperature of 300–500 °C for 1 h, they were transformed into phase-pure LiMn₂O₄ nanoparticles of about 50 to 70 nm size in diameter.     

Preparation of double-doped BaCeO3 and its application in the synthesis of ammonia at atmospheric pressure

Perovskite-type oxides BaCe_0.90Sm_0.10O_3−δ (BCS) and BaCe_0.80Gd_0.10Sm_0.10O_3−δ (BCGS) were synthesized by the sol–gel method and characterized by thermal analysis (TG-DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Using the sintered samples as solid electrolytes and silver–palladium alloy as electrodes, ammonia was synthesized from nitrogen and hydrogen at atmospheric pressure in a solid-state proton-conducting cell reactor. The maximum rate of production of ammonia was 5.82×10⁻⁹ mol s⁻¹ cm⁻².     

Preparation and photoluminescence properties of ZnO/amorphous-BaTiO3 thin-films by sol–gel process

ZnO/amorphous-BaTiO₃ thin-films were prepared on glass substrates by a sol–gel process. DSC/TGA, XRD and AFM were used to analyze the thermolysis of the precursor and the crystal growth characteristics of ZnO, and IR spectroscopy was used to determine the presence of OH groups and CO impurities containing in the films. Violet emission centering at 418 and 438 nm was observed in room temperature PL spectra of the films annealed at 400–500 °C. The strongest violet emission was observed in the film annealed at 400 °C. The emission intensity reduces as the annealing temperature increases, and vanishes in the film annealed at 550 °C. All of the films contain OH and CO groups, and the films annealed at the temperature over 450 °C contain CO₂ impurities, indicating the enhancing oxidation of the films. The vanishing of the violet emission is probably due to the improvement of the oxygen deficient of ZnO crystals.     

Optical bistability for ZnO–Nb2O5–TeO2 glasses

We examined the optical nonlinear properties of ZnO–Nb₂O₅–TeO₂. The absorption and Raman spectra were measured, the third-order nonlinear susceptibility was determined by degenerated four wave mixing technique. The magnitude of χ⁽³⁾ is about 1.0 × 10⁻¹² esu, larger than that of silica glasses, and the optical bistability was observed in a Fabry–Perot cavity.     

Surface and grain-boundary energies as well as surface mass transport in polycrystalline CeO2

The multiphase equilibration technique for the determination of the equilibrium angles that develop at the interphase boundaries of a solid–liquid–vapor system, has been used to calculate the surface and interfacial energies in polycrystalline CeO₂ and CeO₂/Cu system in argon atmosphere at the temperature range 1473–1773 K. Linear temperature functions were obtained by extrapolation, for the surface energy γ_sv (J/m²) = 2.465–0.563 × 10⁻³ T and the grain-boundary energy γ_ss (J/m²) = 1.687–0.391 × 10⁻³ T of the ceramic, as well as for the interfacial energy γ_sl (J/m²) = 2.623–1.389 × 10⁻³(T −1356 K) of the CeO₂/Cu system. Grain-boundary grooving studied on polished surfaces of CeO₂ annealed in argon atmosphere at the same temperature range has shown that surface diffusion was the dominant mechanism for the mass transport. The surface diffusion coefficient can be expressed according to the equation D_s (m²/s) = 3.82 × 10⁻⁴ exp(−308,250/RT).     

Sorption behavior of nano-TiO2 for the removal of selenium ions from aqueous solution

Titanium dioxide nanoparticles were employed for the sorption of selenium ions from aqueous solution. The process was studied in detail by varying the sorption time, pH, and temperature. The sorption was found to be fast, and to reach equilibrium basically within 5.0 min. The sorption has been optimized with respect to the pH, maximum sorption has been achieved from solution of pH 2–6. Sorbed Se(IV) and Se(VI) were desorbed with 2.0 mL 0.1 mol L⁻¹ NaOH. The kinetics and thermodynamics of the sorption of Se(IV) onto Nano-TiO₂ have been studied. The kinetic experimental data properly correlate with the second-order kinetic model (k₂ = 0.69 g mg⁻¹ min⁻¹, 293 K). The overall rate process appears to be influenced by both boundary layer diffusion and intraparticle diffusion. The sorption data could be well interpreted by the Langmuir sorption isotherm. The mean energy of adsorption (14.46 kJ mol⁻¹) was calculated from the Dubinin–Radushkevich (D–R) adsorption isotherm at room temperature. The thermodynamic parameters for the sorption were also determined, and the ΔH⁰ and ΔG⁰ values indicate exothermic behavior.     

Influence of annealing treatments for ZnO-doped Zr0.8Sn0.2TiO4 thin films by RF magnetron sputtering

Zirconium tin titanium oxide doped 1 wt.% ZnO thin films on n-type Si substrate were deposited by rf magnetron sputtering at a fixed rf power of 300 W, a substrate temperature of 450 °C, a deposition pressure of 5 mTorr and an Ar/O₂ ratio of 100/0 with various annealing temperatures and annealing times. Electrical properties and microstructures of 1 wt.% ZnO-doped (Zr_0.8Sn_0.2)TiO₄ thin films prepared by rf magnetron sputtering on n-type Si(100) substrates at different annealing temperatures (500 °C-700 °C) and annealing times (2 h-6 h) have been investigated. The structural and morphological characteristics analyzed by X-ray diffraction (XRD) and atomic force microscope (AFM) were sensitive to the treatment conditions such as annealing temperature and annealing time. At an annealing temperature of 600 °C and an annealing time of 6 h, the ZnO-doped (Zr_0.8Sn_0.2)TiO₄ thin films possess a dielectric constant of 46 (at f = 10 MHz), a dissipation factor of 0.059 (at f = 10 MHz), and a low leakage current density of 3.8 × 10^− 9 A/cm² at an electrical field of 1 kV/cm.     

Enhancement of fatigue endurance and retention characteristic in Bi3.25Eu0.75Ti3O12 thin films

The effects of moderate annealing temperature (600–800 °C) on the microstructure, fatigue endurance, retention characteristic, and remnant polarization (2P_r) of Bi_3.25Eu_0.75Ti₃O₁₂ (BET) thin films prepared by metal-organic decomposition (MOD) were studied in detail. 2P_r (66 µC/cm² under 300 kV/cm), fatigue endurance (3% loss of 2P_r after 1.2 × 10¹⁰ switching cycles), and retention characteristic (no significant polarization loss after 1.8 × 10⁵s) for BET thin film annealed at 700 °C are better than those for thin films annealed at other temperature. The mechanisms concerning the dependence of microstructure and ferroelectric properties on the annealing temperature were discussed.     

Growth, thermal and spectroscopic characteristics of LiNd(WO4)2 crystal

Crystal growth, thermal and optical characteristics of LiNd(WO₄)₂ crystal have been investigated. The LiNd(WO₄)₂ crystal up to Ø15 × 32 mm³ has been grown by Czochralski technique. The hardness is about 5.0 Mohs’ scale. The specific heat at 50 °C is 0.42 J g⁻¹ K⁻¹. The thermal expansion coefficient for c- and a- axes is 1.107 × 10⁻⁵ and 2.104 × 10⁻⁵ K⁻¹, respectively. The absorption and fluorescence spectra and the fluorescence decay curve of LiNd(WO₄)₂ crystal were measured at room temperature. Some spectroscopic parameters such as the intensity parameters, the spontaneous transition probabilities, the fluorescence branching ratios, the radiative lifetimes and emission cross sections were estimated.     

The effect of Sb2O5 additions on the dielectric properties of Ag(Nb0.8Ta0.2)O3 ceramics

The sintering behavior and dielectric properties for perovskite Ag(Nb_0.8Ta_0.2)O₃ ceramic with Sb₂O₅ doping was explored. A small amount of Sb₂O₅ (2.5 wt.%) led to high densification at temperatures < 1060 °C. The dielectric constant increased and the temperature coefficient decreased with increasing concentration of Sb₂O₅, and the dielectric constant reached 673, combined with a low temperature coefficient of 147 ppm/°C, and dielectric loss of 0.0044 (at 1 MHz) for the sample with 3.5 wt.% Sb₂O₅ sintered at 1080 °C.     

High-temperature stability of the mechanical and optical properties of Si–B–C–N films prepared by magnetron sputtering

Quaternary Si–B–C–N materials are becoming increasingly attractive due to their possible high-temperature and harsh-environment applications. In this work, amorphous Si–B–C–N films with two compositions (Si₃₄B₉C₄N₄₉ and Si₃₆B₁₃C₇N₄₀) and low contamination level (H + O + Ar < 4 at.%) were deposited on silicon substrates by reactive dc magnetron co-sputtering using two different targets and gas mixtures. Thermal stability of these films was investigated in terms of composition, bonding structure, as well as mechanical and optical properties after annealing in helium up to a 1300°C substrate limit. Films with a high nitrogen content (Si₃₄B₉C₄N₄₉, i.e. N/[Si + B + C]~ 1.0) were found to be stable up to 1300°C. After annealing, the hardness and elastic recovery of those films slightly increased up to 27 GPa and 84%, respectively, and the reduced Young's modulus remained practically constant (~ 170 GPa). The refractive index and the extinction coefficient at 550 nm were evaluated at 2.0 and 5 × 10^− 4, respectively, and the optical band gap was approximately 3.0 eV. In contrast, films with a lower nitrogen content (Si₃₆B₁₃C₇N₄₀, i.e. N/[Si + B + C]~ 0.7) were stable only up to 1200°C. Both Si–B–C–N materials studied here exhibited extremely high oxidation resistance in air up to the 1300°C substrate limit.     

ZnO sputter coating on SnO2 nanowires: Effects of thin coating and subsequent thermal annealing

The structural and optical properties of SnO₂–ZnO core–shell nanowires were studied and the effects of thermal annealing were investigated. As-prepared SnO₂–ZnO core–shell nanowires exhibited a smooth and continuous shell layer along the nanowire, with a thickness in the range of 5–10 nm. While the thin ZnO shell layer disappeared after annealing at 800 °C, this did not occur after annealing at 600 °C. The as-fabricated SnO₂–ZnO core–shell nanowires exhibited yellow emission, presumably from the core SnO₂ nanowires. The UV emission from ZnO shell layer was obtained by annealing at 600 °C, whereas it was removed by annealing at 800 °C.     

Nano-crystalline LaFeO3 powders synthesized by the citrate–gel method

A novel sol–gel process was developed for preparing nano-sized, perovskite-type LaFeO₃ powder by the thermal decomposition of the gel-complex of LaFe–(C₆H₈O₇·H₂O). The structural evolution has been systematically investigated by X-ray diffraction (XRD), differential thermal analysis (DTA) and thermogravimetric analysis (TGA). Perovskite powder of  25 nm size could be obtained at a temperature of  600 °C without formation of any secondary phases of La₂O₃ and Fe₂O₃ single oxides and no requirements of high temperature/vacuum/pH control etc. Analysis of the X-ray powder diffraction data showed a decrease in the value of lattice strains with increasing decomposition temperature, whereas the particle size increases with increasing decomposition temperature.