回收制备烧结Nd-Fe-B磁体的磁性能与耐热性能

以废旧钕铁硼磁体为原料,采用短流程回收制备技术制备了烧结Nd-Fe-B磁体,通过添加镨钕混合稀土研究了磁体的磁性能和耐热性能.结果表明,在回收磁体中添加2％ PrNd,制备的烧结Nd-Fe-B磁体的剩磁为1.31T、矫顽力为1 474.86 kA/m、磁能积为353.90 kJ/m3.与一次成品相比矫顽力恢复到102％,剩磁恢复到95％,磁能积恢复到90％.在293～393 K范围内未掺杂PrNd磁体的矫顽力温度系数为-0.589 9％/K,掺杂2％PrNd磁体的矫顽力温度系数为-0.556 4％/K,提高了磁体在高温下的耐热性能.这是由于添加混合稀土PrNd增强了主相晶粒间的去磁交换耦合作用,提高了主相的磁晶各向异性场,从而提高了磁体的矫顽力和耐热性能.     

NdH纳米助剂回收制备烧结钕铁硼永磁体的研究

采用NdH纳米掺杂的方法对废旧烧结钕铁硼磁体进行了回收制备。研究了不同NdH纳米粉掺杂量对再制造烧结钕铁硼磁性能的影响。随着NdH纳米粉末掺杂量的增多,烧结磁体矫顽力从926.54 kA/m增加到1 299.87 kA/m;剩磁首先相对稳定在1.296 T,在掺杂量2.0%(质量分数)后,剩磁逐渐下降。与原始磁体相比,2.0%(质量分数)NdH纳米粉掺杂磁体性能最佳,矫顽力回复97.5%,剩磁回复95.9%,磁能积回复89.7%。通过计算,掺杂3.0%(质量分数)NdH纳米粉后,再制造烧结磁体中富钕相体积分数从3.03%增加到5.70%,然而其晶粒尺寸从8.18μm增长至11.68μm。结合微观分析与磁性能,2.0%(质量分数)NdH纳米粉掺杂磁体性能最好。     

钇掺杂M型锶铁氧体的结构与磁性能研究

采用固相烧结法于1150℃保温烧结3h制备了钇掺杂的M型锶铁氧体SrYxFe(12-x)O19(x=0,0.25,0.5,0.75,1.0)预烧料,再将预烧料在取向磁场下压制成型后于1295℃保温3h烧结成磁体。用X射线衍射仪对烧结磁体的相结构进行分析,用扫描电子显微镜对烧结磁体的表面形貌进行分析,用磁性能测试仪测试烧结磁体的磁性能。结果表明,随着钇掺杂量的增加,晶格常数a呈现非常微小的变化,c缓慢增大,a/c先增大后减小,晶体X射线密度dX-ray近似呈线性增加。SEM分析表明制备的磁体具备典型的六方晶系结构的形貌特征。磁性能研究表明随着钇掺杂量的增加,剩磁Br单调增加,内禀矫顽力Hcj、最大磁能积(BH)max与磁感矫顽力Hcb的变化规律均为先增大后减小;当x=1.0时,剩磁Br达到最大值420.7mT,但内禀矫顽力Hcj随之变为最小值;当x=0.75时Hcj达到最大值323.7kA·m-1,同时剩磁Br达到了410.4mT。     

烧结钕铁硼磁体溅射渗镝工艺与磁性能研究

采用直流磁控溅射的方法,在烧结Nd-Fe-B磁体表面制备了Dy薄膜,对比研究了N35烧结态与回火态磁体晶界扩散后组织形貌与性能的变化。N35烧结态与回火态磁体经溅射渗Dy处理后,在剩磁仅降低0.009T和0.03T的情况下,矫顽力大幅度提高,分别提高了708.44kA/m和665.46kA/m,渗Dy处理后磁体中的Dy元素平均质量分数增加不超过0.4%。SEM和EDS能谱的分析结果表明,晶界组织形貌的改善和(Nd,Dy)2Fe14B外延层的形成是矫顽力提升的主要原因。EPMA元素面分布结果显示,Dy主要富集在富Nd相处,三叉型富Nd相处Dy含量最高,而Dy没有扩散到主相晶粒内部,不会导致剩磁大幅度降低,从而有效提高了磁体的综合磁性能。     

Ga对HDDR磁粉热变形磁体磁性能和微观结构的影响

利用HDDR工艺制备出Nd32FebalBGax(x=0.0、0.2%、0.4%、0.6%、0.8%(质量分数))磁粉,并且对HDDR磁粉进行热压/热变形处理制备出全密度各向异性磁体。研究了热变形温度和Ga含量对Nd-Fe-B热变形磁体磁性能的影响,观测了不同Ga含量热变形磁体的微观结构,探讨了微量元素Ga的添加对用HDDR磁粉制备的热变形磁体微观结构和磁性能的影响机制。研究发现,Ga的添加能够明显减小热变形磁体的主相晶粒尺寸,改善磁体的微观织构,并可以同时提高热变形磁体的剩磁和矫顽力。当Ga含量为0.6%(质量分数)时,热变形磁体的磁能积达到最大值228.3kJ/m3。     

放电等离子烧结制备块状纳米晶SmCo5烧结磁体

采用放电等离子烧结（SPS）技术制备了致密纳米晶SmCo5烧结磁体，研究了磁体的结构和磁性能。X衍射结果表明，烧结磁体具有CaCu5结构，说明SPS过程可以获得稳定的1：5相。TEM观察显示，磁体由平均晶粒尺寸约为30nm的1：5相构成。室温时磁体的矫顽力高达2208kA/m，而剩磁比高达0，7，说明在纳米晶之间存在强烈的晶间交换耦合作用。烧结磁体具有良好的高温性能，773K时的矫顽力为456kA/m，矫顽力温度系数β为-0．212％/K。     

高温稀土永磁体Sm(CobalFe0.09Cu0.09Zr0.03)7.69磁性能的研究

采用粉末冶金法制备Sm(CobalFe0.09Cu0.09Zr0.03)7.69稀土永磁体,研究了烧结温度对磁体的磁性能的影响。结果表明:随着烧结温度的提高,剩磁Br、内禀矫顽力Hcj及最大磁能积(BH)max都先增加后降低。磁体的综合磁性能在烧结温度为1230℃时最优,室温下Br、Hcj和(BH)max分别达到10.40kGs、25.16kOe和25.88MGOe,且1230℃烧结磁体的温度稳定性较好,有望应用在500℃的工作环境中。     

利用混合稀土制备稀土永磁体的工艺研究

用富含La,Se的混合稀土代替部分PrNd合金作为原料,按(NdPr)18.2(MM)13.6Fe66.22B1.08Cu0.2Al0.7(质量分数)进行配料,以甩带熔炼方式形成薄带状合金,合金经氢破碎后,用气流磨制成粉末,最后经压制、烧结得到一种廉价稀土永磁体.用磁性测量仪测量了样品的磁性能;用定氧仪考察了防氧化剂对粉体氧含量的影响,用SEM观察了烧结样品的组织形貌.该永磁体的剩余磁感应强度为1.16～1.2 T,内禀矫顽力为960～1 000 kA/m,磁能积为248～264 kJ/m3.该磁体性能与N33,N35钕铁硼磁体性能相当.     

SmCo7块状纳米晶烧结磁体的制备和性能

采用放电等离子烧结技术制备了致密纳米晶SmCo6.6Nb0.4烧结磁体,研究了磁体的结构和磁性能.结果表明,烧结磁体具有TbCu7结构,说明通过SPS过程可以获得稳定的1:7相;磁体由平均晶粒尺寸约为30 nm的1:7相构成,磁体的室温矫顽力高达2.8 T,而剩磁比高达0.74,说明在纳米晶之间存在强烈的晶间交换耦合作用.烧结磁体具有良好的高温性能,773K时的矫顽力为0.48 T,矫顽力温度系数β为-0.169%/K.     

块状纳米晶Sm2Co17烧结磁体的研究

采用高能球磨和放电等离子烧结技术制备了致密纳米晶Sm2Co17烧结磁体,研究了粉末和烧结磁体的结构和磁性能.球磨粉末在低温退火(<1023K)时,主相为TbCu7结构;高温退火(>1023K)时,主相为Th2Zn17结构.退火温度从923K增加到1223K,粉末的矫顽力从0.99T下降到0.12T.烧结磁体也具有TbCu7结构,磁体平均晶粒尺寸约为35nm.室温时磁体的剩磁为0.65T,矫顽力达0.87T.烧结磁体具有较好的高温性能,573K时的剩磁为0.6T,矫顽力为0.32T.     

From Industry 4.0 to Research 4.0. Development of High Performance Fibers in the Light of Digitization

We associate a variety of innovations with the term ＂Industry 4.0＂. The pioneer of many 4.0 modifications forms the basisfor the trend towards the integrated di...     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Roman iron and steel: A review

ABSTRACT

The production of ferrous metal increased during the Roman Late Republican period, Principate and Empire. The direct bloomery process was used to extract the metal from its ores using slag-tapping and slag-pit furnaces. The fuel was charcoal and an air blast was introduced by bellows-operated tuyères. Iron formed as a bloom, often as a spongy mass of metal, which contained impurities from the smelting process, including unreacted ore, fuel, slag and fragments from the furnace walls, while the metal was often inhomogeneous with varied carbon contents. Blooms were either smithed directly into bars or ingots or they were broken up, which also allowed the removal of gross impurities and a selection of pieces with similar properties to be made. These could then be forge-welded together and formed into characteristically shaped ingots. Making steel in the furnace seems to have been achieved: it depended on the ore and the furnace and conditions within it. Surface carburization was also carried out. Iron and steel were used extensively in construction and for tools and weapons. Fire welding was often used to add pieces of steel to make the edges of tools and weapons, which could be heat-treated by quenching to harden them.     

Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

Synthesis of Alumina-Zirconia Nanocomposites by Solgel Process

Al₂O₃-ZrO₂ nanocomposites were developed starting with the solgel process. Composite alumina-zirconia nanopowders were synthesized from metallorganic precursors (Aluminium secondary butoxide and zirconium Iso propoxide) using the solgel process. The parameters affecting the synthesis—solvent, concentration of precursor, R/H ratio (i.e., dilution of water in solvent)—were varied as also the temperature and pH. BET and TEM were used to measure nanosize. Diffuse reflectance spectroscopy and also qualitative optical absorption led to identical particle size estimate. The variation of process parameters was used to study the effect and interdependence of process parameters. Artificial Neural Networks was used to rigorously analyze the process. Although this led to confirmation of interdependence of parameters, the presence of a single overwhelming solvent variable was also established. Then the optimal process was used to synthesize more nanopowder. To produce bulk nanocomposite the nanopowders were sintered by varying the temperature and time period. The sintered lithoids were probed with a vickers hardness tester to measure elastic modulus, hardness, and fracture toughness. The results showed high elastic modulus, modest hardness, and very high fracture toughness.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Friction Stir Processing Strategies for Uniform Distribution of Reinforcement in a Surface Composite

Friction stir processing (FSP) is an important technique for preparing surface composites. Fabricating defect-free surface composites with uniform particle distribution by FSP is a challenging task. In this study, silicon carbide particles reinforced AA5083 alloy surface composites was fabricated using different FSP strategies including variation in process parameters, dual-tool processing and tool offset overlapping. Material flow of the processed material with reinforcement particles demonstrated that the distribution of particles was influenced by the stirring action of the probe as well as the extrusion of the plasticized material due to the movement of the tool. Process parameters, particularly rotational speed, showed a dominant influence on the distribution of silicon carbide particles.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.