金属切削过程中的稳定性分析

本文对于金属切削这一生产过程中所出现的不稳定问题,利用频率特性法中的奈氏判据,对其进行分析,从而找出消除自激振荡和达到切削过程绝对稳定的条件     

Convergence,the university of the future and the future of the university

 The paper questions the ability of current university systems to respond appropriately to the complex demands of an Information Economy. It argues that new relationships between creative subjects and technology require new thinking about the nature and purpose of universities per se. In particular, attention is drawn to the growing involvement of the private sector in higher education. It is argued that it may not be appropriate to think of the `university of the future' in terms of current public sector and quasi public sector institutions, but rather in terms of an emporium, based on an international trade in educational services, and with the `University' as we now understand it occupying the functions of licensing, quality assurance and cultural custodianship. Accepted: 25 June 2002     

浅谈反映人体测量学来源的人体比例理论

人体测量学并不是现代社会的产物。有着很长发展历史的人体比例理论中就包含了现代人体测量学的基本内容,尽管其还不够系统完整,但至少说明了在艺术创作中诞生的人体比例理论对现代人体测量学的影响。并随着时间的推移而不断的完善发展,为现代人体测量学的系统提出奠定了坚实的基础。     

VMware的技术与应用探析

虚拟化技术是当今服务器技术的一个主流方向,也是一项在计算机领域具有革命性意义的技术.作为x86架构体系下虚拟化技术的领军者-VMware,在技术上有其独到之处.研究VMware的技术与应用,对探知其优秀的技术特点,了解其成熟的产品体系有着现实意义.     

应用多媒体技术教学的优势及存在问题与对策

每一种媒体都有自身的长处,对某种特定的教学和学习有效。同样,每种媒体又不可避免地存在局限性,不利于某些教学和学习。因此,多媒体不是一种全能的媒体,也不可能代替传统媒体。现代媒体与传统媒体在教学中应相互补充,取长补短,相得益彰。     

表征绕组特征的参数与绕组变形关系的仿真

为了提升变压器绕组变形判别精度,研究了表征绕组特征的参数与绕组变形关系的仿真方法。利用有限元方法建立表征绕组特征的参数与绕组变形关系的双绕组、同芯式变压器漏磁场模型,通过二维泊松方程混合边值的有限元解分析变压器绕组漏磁场,利用最小二乘算法基于所建立变压器漏磁场模型辨识可表征绕组特征的漏电感参数,通过所获取漏电感值与实际漏电感值相比实现变压器绕组变形判别。通过有限元方法建立变压器绕组仿真模型并分析表征绕组特征的参数与绕组变形关系,仿真结果可知,该方法可有效辨识表征绕组特征的漏电感参数,依据表征绕组特征参数与绕组变形关系实现变压器高压与低压绕组变形的精准判别,判别精度高达99%以上,实验效果表明利用表征绕组特征的漏电感参数在线监测绕组变形具有可行性。     

基于网络的微机计量管理系统的开发

本文通过计量工作中用对等网实现多台微机电子秤的互联，实现数据的自动采集和共享，阐述了系统的硬件构成及软件设计，系统具有计量准确、快速、技术先进等特点，可大大提高工作效率，对企业实现计量管理网络化将起到有益的帮助。     

Modelling the dynamics of the tilt-casting process and the effect of the mould design on the casting quality

All titanium alloys are highly reactive in the molten condition and so are usually melted in a water-cooled copper crucible to avoid contamination using processes such as Induction Skull Melting (ISM). These provide only limited superheat which, coupled with the surface turbulence inherent in most conventional mould filling processes, results in entrainment defects such as bubbles in the castings. To overcome these problems, a novel tilt-casting process has been developed in which the mould is attached directly to the ISM crucible holding the melt and the two are then rotated together to achieve a tranquil transfer of the metal into the mould. From the modelling point of view, this process involves complex three-phase flow, heat transfer and solidification. In this paper, the development of a numerical model of the tilt-casting process is presented featuring several novel algorithm developments introduced into a general CFD package (PHYSICA) to model the complex dynamic interaction of the liquid metal and melting atmosphere. These developments relate to the front tracking and heat transfer representations and to a casting-specific adaptation of the turbulence model to account for an advancing solid front. Calculations have been performed for a 0.4 m long turbine blade cast in a titanium aluminide alloy using different mould designs. It is shown that the feeder/basin configuration has a crucial influence on the casting quality. The computational results are validated against actual castings and are used to support an experimental programme. Although fluid flow and heat transfer are inseparable in a casting, the emphasis in this paper will be on the fluid dynamics of mould filling and its influence on cast quality rather than heat transfer and solidification which has been reported elsewhere.     

计算机硬件系统常见故障的分析处理

归纳总结了计算机用户在日常工作、生活中可能碰到的多种代表性的电脑软硬件故障和问题及解决方法。各种故障问题类型和故障排除思维习惯来编排,具体包括开关机故障、死机故障、显示故障、声音故障、存储设备故障、CPU故障、内存故障、主板故障。在碰到电脑故障时,能快速判断和解决一些有规律可循的常见故障,以及如何维护电脑、如何避免电脑故障。     

Study of the response of the area of the palm to impact: Relationship between the physical characteristic of the palm impact and the subject perception of the severity of the palm impact

Even though using the hand as a hammer causes injury, the practice continues, and may be increasing, in industry and in jobs that require intensive manual labor. This was an exploratory study aimed at measuring the relationships between the forces of strikes, the relative angles of strikes, and/or the number of strikes (up to 3) with the perception of severity of strikes when using the base of the palm of the hand. Eight subjects struck a metal force plate with the base of the palm of the hand at three levels of force, three levels of angle with respect to the surface of a force plate, and with three different numbers of times in a trial. Subjects were then asked to give a psychophysical rating after each trial. The subjective perception of the severity of each impact and force-time curves were recorded. From each force-time curve, peak force, maximum acceleration of force application, and the area of the force curve from initiation to peak were determined. Sixteen ANOVA models were analyzed.