Effect of posture positions on the evaporative resistance and thermal insulation of clothing

Evaporative resistance and thermal insulation of clothing are important parameters in the design and engineering of thermal environments and functional clothing. Past work on the measurement of evaporative resistance of clothing was, however, limited to the standing posture with or without body motion. Information on the evaporative resistance of clothing when the wearer is in a sedentary or supine posture and how it is related to that when the wearer is in a standing posture is lacking. This paper presents original data on the effect of postures on the evaporative resistance of clothing, thermal insulation and permeability index, based on the measurements under three postures, viz. standing, sedentary and supine, using the sweating fabric manikin-Walter. Regression models are also established to relate the evaporative resistance and thermal insulation of clothing under sedentary and supine postures to those under the standing posture. The study further shows that the apparent evaporated resistances of standing and sedentary postures measured in the non-isothermal condition are much lower than those in the isothermal condition. The apparent evaporative resistances measured using the mass loss method are generally lower than those measured using the heat loss method due to moisture absorption or condensation within clothing. STATEMENT OF RELEVANCE: The thermal insulation and evaporative resistance values of clothing ensembles under different postures are essential data for the ergonomics design of thermal environments (e.g. indoors or a vehicle's interior environment) and functional clothing. They are also necessary for the prediction of thermal comfort or duration of exposure in different environmental conditions.     

A quasi-physical model for predicting the thermal insulation and moisture vapour resistance of clothing

Based on the improved understanding of the effects of wind and walking motion on the thermal insulation and moisture vapour resistance of clothing induced by air ventilation in the clothing system, a new model has been derived based on fundamental mechanisms of heat and mass transfer, which include conduction, diffusion, radiation and natural convection, wind penetration and air ventilation. The model predicts thermal insulation of clothing under body movement and windy conditions from the thermal insulation of clothing measured when the person is standing in the still air. The effects of clothing characteristics such as fabric air permeability, garment style, garment fitting and construction have been considered in the model through the key prediction parameters. With the new model, an improved prediction accuracy is achieved with a percentage of fit being as high as 0.96.     

A CAD system for multi-style thermal functional design of clothing

Designing clothing with good thermal functional performance is very demanding and time-consuming if we follow traditional design methods. An innovative method consisting of a CAD system, allowing the designer to perform multi-style clothing thermal functional design on a customized virtual human body, is presented in this paper. The new functionalities of the virtual system provide the abilities to perform intelligent design of different clothing styles and materials for different body parts according to individual design requirements, namely design of various categories of clothing, such as hat, coat, trousers, gloves and shoes in the same design scheme. The designed clothing can be worn on a virtual human body and set in various wearing scenarios. The thermal behaviors in the human body-clothing-environment are simulated to predict the thermal performance of clothing and thermal response of the human body at multi-parts. 2D/3D visualization and animation of the simulation results are presented to help the designers to preview and determine whether the thermal performance of clothing is satisfactory and then obtain feedback to improve their designs iteratively.     

Design of functional work clothing for meat-cutters

The aim of this study was to design new functional work clothing for meat-cutters, paying particular attention to the metabolic requirements of the work and the thermal and general working conditions in slaughterhouses. On the basis of the results of the pilot study (review of the literature, questionnaires and interviews, work analysis, physiological measurements) different types of work clothing were designed for prolonged used during normal work in meat cutting. Physical material tests and measurements of thermal insulation values (l(cl)), and the follow-up of clothing maintenance were carried out. Further modifications and evaluations of work clothing were based on the opinions of meat-cutters and on the physiological trials in slaughterhouses. The final assembly of work clothing consists of three pieces (cotton/polyester): an apron, trousers with extra insulation in the lower back, and a work coat with extra insulation in the neck and shoulders, and at the wrists. The sleeves are protected against moisture by special textile material. The thermal insulation of this new set of work clothing together with long sleeved and legged underwear is 1.3 clo and it proved to be sufficient for thermal comfort in moderate work in an air temperature of 10 degrees C.     

Effects of wearing aircrew protective clothing on physiological and cognitive responses under various ambient conditions

Heat stress can be a significant problem for pilots wearing protective clothing during flights, because they provide extra insulation which prevents evaporative heat loss. Heat stress can influence human cognitive activity, which might be critical in the flying situation, requiring efficient and error-free performance. This study investigated the effect of wearing protective clothing under various ambient conditions on physiological and cognitive performance. On several occasions, eight subjects were exposed for 3 h to three different environmental conditions; 0 degrees C at 80% RH, 23 degrees C at 63% RH and 40 degrees C at 19% RH. The subjects were equipped with thermistors, dressed as they normally do for flights (including helmet, two layers of underwear and an uninsulated survival suit). During three separate exposures the subjects carried out two cognitive performance tests (Vigilance test and DG test). Performance was scored as correct, incorrect, missed reaction and reaction time. Skin temperature, deep body temperature, heart rate, oxygen consumption, temperature and humidity inside the clothing, sweat loss, subjective sensation of temperature and thermal comfort were measured. Rises in rectal temperature, skin temperature, heart rate and body water loss indicated a high level of heat stress in the 40 degrees C ambient temperature condition in comparison with 0 degrees C and 23 degrees C. Performance of the DG test was unaffected by ambient temperature. However, the number of incorrect reactions in the Vigilance test was significantly higher at 40 degrees C than at 23 degrees C (p = 0.006) or 0 degrees C (p = 0.03). The effect on Vigilance performance correlated with changes in deep-body temperature, and this is in accordance with earlier studies that have demonstrated that cognitive performance is virtually unaffected unless environmental conditions are sufficient to change deep body temperature.     

Performance enhancement of hybrid personal cooling clothing in a hot environment: PCM cooling energy management with additional insulation

A novel design of personal cooling clothing incorporating additional insulation sandwiched between phase change materials (PCMs) and clothing outer layer is proposed. Performance of four personal cooling systems including clothing with only PCMs, clothing with PCMs and insulation (PCM?+?INS), clothing with PCMs and ventilation fans (HYB), and clothing with PCMs, ventilation fans and insulation (HYB?+?INS) was investigated. Effect of additional insulation on clothing cooling performance in terms of human physiological and perceptual responses was also examined. Human trials were carried out in a hot environment (i.e. 36?°C, RH = 59%). Results showed that significantly lower mean skin/torso temperatures were registered in HYB?+?INS as compared to HYB. In contrast, no significant effect of the use of insulation on both skin and body temperatures between PCM and PCM?+?INS was observed. Also, no significant difference in thermal sensations, thermal comfort, and skin wetness sensation was registered between cooling systems with and without additional insulation.

Practitioner Summary: Hybrid personal cooling clothing has shown the ability to provide a relatively cool microclimate around the wearer’ body while working in hot environments. The present work addresses the importance of cooling energy saving for PCMs in a hot environment. This work contributes to optimising cooling performance of hybrid personal cooling systems.     

3D quantification of microclimate volume in layered clothing for the prediction of clothing insulation

Garment fit and resultant air volume is a crucial factor in thermal insulation, and yet, it has been difficult to quantify the air volume of clothing microclimate and relate it to the thermal insulation value just using the information on the size of clothing pattern without actual 3D volume measurement in wear condition. As earlier methods for the computation of air volume in clothing microclimate, vacuum over suit and circumference model have been used. However, these methods have inevitable disadvantages in terms of cost or accuracy due to the limitations of measurement equipment. In this paper, the phase-shifting moiré topography was introduced as one of the 3D scanning tools to measure the air volume of clothing microclimate quantitatively. The purpose of this research is to adopt a non-contact image scanning technology, phase-shifting moiré topography, to ascertain relationship between air volume and insulation value of layered clothing systems in wear situations where the 2D fabric creates new conditions in 3D spaces. The insulation of vests over shirts as a layered clothing system was measured with a thermal manikin in the environmental condition of 20 degrees C, 65% RH and air velocity of 0.79 m/s. As the pattern size increased, the insulation of the clothing system was increased. But beyond a certain limit, the insulation started to decrease due to convection and ventilation, which is more apparent when only the vest was worn over the torso of manikin. The relationship between clothing air volume and insulation was difficult to predict with a single vest due to the extreme openings which induced active ventilation. But when the vest was worn over the shirt, the effects of thickness of the fabrics on insulation were less pronounced compared with that of air volume. In conclusion, phase-shifting moiré topography was one of the efficient and accurate ways of quantifying air volume and its distribution across the clothing microclimate. It is also noted that air volume becomes more crucial factor in predicting thermal insulation when clothing is layered.     

A comparison of methods for assessing the thermal insulation value of children's schoolwear in Kuwait

In this study, three methods were used to determine the thermal insulation values of different school clothing worn by 6 to 17 year old girls and boys in Kuwait classrooms for both summer and winter seasons. The different clothing ensembles' insulations were determined by 1: measurement using adult-sized versions of the clothing on thermal manikins, 2: estimations from adult clothing data obtained from the standards tables in ISO 9920 and ASHRAE 55, and 3: calculations using a regression equation from McCullough et al. (1985) that was adapted to accommodate children's sizes for ages 6-17 years. Values for the clothing area factor, f(cl), were also determined by measurement and by using a prediction equation from ISO 9920. Results in this study suggested that the clothing insulation values found from the measured and adapted data were similar to the adult's data in standards tables for the same summer and winter seasons. Further, the effect of the insulation values on the different scholars' age groups were investigated using the clothing temperature rating technique and compared to the scholars' comfort temperature found in recent field studies. Results showed that the temperature ratings of the clothing using the three methods described above are close and in agreement with the scholars' comfort temperature. Though estimated and measured f(cl) data differed, the impact on the temperature ratings was limited. An observed secular change in the children's heights and weights in the last few decades implies that, for adolescents, the children's body surface areas are similar to those of adults, making the use of adult clothing tables even more acceptable. In conclusion, this study gives some evidence to support the applicability of using adults' data in ASHRAE 55 and ISO 9920 standards to assess the thermal insulation values of different children's clothing ensembles, provided that careful selection of the garments, ensembles material and design takes place.     

The effect of added fullness and ventilation holes in T-shirt design on thermal comfort

This paper reports on an experimental investigation on the effect of added fullness and ventilation holes in T-shirt design on clothing comfort measured in terms of thermal insulation and moisture vapour resistance. Four T-shirts in four different sizes (S, M, L, XL) were cut under the traditional sizing method while another (F-1) was cut with specially added fullness to create a 'flared' drape. A thermal manikin 'Walter' was used to measure the thermal insulation and moisture vapour resistance of the T-shirts in a chamber with controlled temperature, relative humidity and air velocity. The tests included four conditions: manikin standing still in the no-wind and windy conditions and walking in the no-wind and windy condition. It was found that adding fullness in the T-shirt design (F-1) to create the 'flared' drape can significantly reduce the T-shirt's thermal insulation and moisture vapour resistance under walking or windy conditions. Heat and moisture transmission through the T-shirt can be further enhanced by creating small apertures on the front and back of the T-shirt with specially added fullness. STATEMENT OF RELEVANCE: The thermal comfort of the human body is one of the key issues in the study of ergonomics. When doing exercise, a human body will generate heat, which will eventually result in sweating. If heat and moisture are not released effectively from the body, heat stress may occur and the person's performance will be negatively affected. Therefore, contemporary athletic T-shirts are designed to improve the heat and moisture transfer from the wearer. Through special cutting, such athletic T-shirts can be designed to improve the ventilation of the wearer.     

Localised boundary air layer and clothing evaporative resistances for individual body segments

Evaporative resistance is an important parameter to characterise clothing thermal comfort. However, previous work has focused mainly on either total static or dynamic evaporative resistance. There is a lack of investigation of localised clothing evaporative resistance. The objective of this study was to study localised evaporative resistance using sweating thermal manikins. The individual and interaction effects of air and body movements on localised resultant evaporative resistance were examined in a strict protocol. The boundary air layer's localised evaporative resistance was investigated on nude sweating manikins at three different air velocity levels (0.18, 0.48 and 0.78 m/s) and three different walking speeds (0, 0.96 and 1.17 m/s). Similarly, localised clothing evaporative resistance was measured on sweating manikins at three different air velocities (0.13, 0.48 and 0.70 m/s) and three walking speeds (0, 0.96 and 1.17 m/s). Results showed that the wind speed has distinct effects on local body segments. In contrast, walking speed brought much more effect on the limbs, such as thigh and forearm, than on body torso, such as back and waist. In addition, the combined effect of body and air movement on localised evaporative resistance demonstrated that the walking effect has more influence on the extremities than on the torso. Therefore, localised evaporative resistance values should be provided when reporting test results in order to clearly describe clothing local moisture transfer characteristics. PRACTITIONER SUMMARY: Localised boundary air layer and clothing evaporative resistances are essential data for clothing design and assessment of thermal comfort. A comprehensive understanding of the effects of air and body movement on localised evaporative resistance is also necessary by both textile and apparel researchers and industry.     

Dynamic clothing insulation. Measurements with a thermal manikin operating under the thermal comfort regulation mode

The main objective of the present work is the assessment of the thermal insulation of clothing ensembles, both in static conditions and considering the effect of body movements. The different equations used to calculate the equivalent thermal resistance of the whole body, namely the serial, the global and the parallel methods, are considered and the results are presented and discussed for the basic, the effective and the total clothing insulations. The results show that the dynamic thermal insulation values are always lower than the corresponding static ones. The highest mean relative difference [(static-dynamic)/static] was obtained with the parallel method and the lowest with the serial. For I_cl the mean relative differences varied from 0.5 to 13.4% with the serial method, from 5.6 to 14.6% with the global and from 7.2 to 17.7% with the parallel method. In addition, the dynamic tests presents the higher mean relative differences between the calculation methods. The results also show that the serial method always presents the higher values and the parallel method the lowest ones. The relative differences between the calculation methods {[(serial-global)/global] and [(parallel-global)/global]} were sometimes significant and associated to the non-uniform distribution of the clothing insulation. In fact, the ensembles with the highest thermal insulation values present the highest differences between the calculation methods.     

The accuracy of estimating the thermal insulation of clothing ensembles - the effect of appraisers

The effect of the appraisers on the estimation of the thermal insulation of clothing ensembles was investigated. Nine appraisers, four experienced and five inexperienced, estimated the total thermal insulation by summing the values for individual garments. Lists of individual garments worn by workers were given during thermal comfort measurements carried out in shops and stores during one winter and summer. The beginners estimated the thermal insulation as accurately as the experienced appraisers. There were, however, great individual differences, for which three main reasons were found. Interpolation between the insulation provided by two garments was insufficient, and the insulation of these garments should be checked in more precise tables. Classification of the garments into heavy, medium and light clothing items was not adequate, and garments not listed by the workers confused the estimation given by different appraisers. The effect of error in thermal insulation on the PMV index is negligible if more than one appraiser estimates the thermal insulation and the mean of the estimates is used.     

Impact of the medical clothing on the thermal stress of surgeons

The aim of the presented experiments was to determine thermal stress of surgeons performing their work with a high metabolic rate, wearing clothing characterized by high insulation and impermeability protecting them against water vapour but also in thermal conditions of a warm climate protecting patients against hypothermia. The experiments were conducted with the participation of 8 volunteers. Each subject took part in the experiment four times, i.e. in each of the four tested surgical gowns. The experiments were conducted in a climatic chamber where thermal conditions characteristic of an operating theatre were simulated. The parameters to be measured included: skin temperature, temperature measured in the auditory canal, sweat rate as well as temperature and humidity between clothing and a human body. The conducted experiments provided the grounds to conclude that medical clothing can be regarded as barrier clothing and it can influence thermal load of a human body.     

A comparative study on the effects of air gap wind and walking motion on the thermal properties of Arabian Thawbs and Chinese Cheongsams

This paper reports on an experimental investigation on the effects of air gap, wind and walking motion on the thermal properties of traditional Arabian thawbs and Chinese cheongsams. Total thermal resistance (I_t) and vapour resistance (R_e) were measured using the sweating fabric manikin – ‘Walter’, and the air gap volumes of the garments were determined by a 3D body scanner. The results showed the relative changes of I_t and R_e of thawbs due to wind and walking motion are greater than those of cheongsams, which provided an explanation of why thawbs are preferred in extremely hot climate. It is further shown that thermal insulation and vapour resistance of thawbs increase with the air gap volume up to about 71,000 cm³ and then decrease gradually. Thawbs with higher air permeability have significantly lower evaporative resistance particularly under windy conditions demonstrating the advantage of air permeable fabrics in body cooling in hot environments.

Practitioner Summary: This paper aims to better understand the thermal insulation and vapour resistance of traditional Arabian thawbs and Chinese cheongsams, and the relationship between the thermal properties and their fit and design. The results of this study provide a scientific basis for designing ethnic clothing used in hot environments.     

Pumping effects on thermal insulation of clothing worn by human subjects

This study was undertaken in order to analyse the importance of the pumping effect on clothing's thermal insulation. To enhance differences in heat exchanges due to the pumping effect, two sets of condition were fixed, minimizing either the convective or the radiative heat transfers. The results showed that: (i) the clothing insulation determined on a manikin, even if he is moving, is larger than the resultant clothing insulation for living subjects; (ii) the insulation is not the same for radiant heat or cold as for convective heat or cold;(iii) the pumping effect can increase or decrease the resultant clothing insulation; (iv) the clothing insulation is smaller in warmer conditions thanin cooler ones; (v) it becomes necessary to make a definite distinction between several kinds of clothing insulation; intrinsic or basic insulation against radiation and convection; effective insulation against radiation and convection taking into account only the heat flowing through the clothing fabric; resultant insulation taking into account the magnitude of the pumping effect when clothing is worn by living subjects     

Effect of physical activity and air velocity on the thermal insulation of clothing

Abstract

Intrinsic thermal clothing insulation and surface air insulation were measured on human subjects by the use of indirect calorimetry. Four male clothing ensembles (0-1-1 -8 clo) and three female clothing ensembles (0-2-1-2 clo) were investigated. Using the standing position as a reference, the influence of sitting, bicycling (40r.p.m., 20 W), walking (3-75 km hour^?1) and of light packing work on the thermal insulation was studied. The influence of an air velocity of 11ms^?1 on thermal insulation during the standing and walking conditions was investigated. The results showed that: (i) intrinsic clothing insulation was maximal in the standing position. It was reduced by 8-18% in the seated position and by 30-50% during bicycling and walking. An air velocity of 11ms^?1 did not influence the intrinsic clothing insulation during walking, but decreased it by 18% in the standing position; (ii) surface air insulation varied with activity and air velocity, but not with clothing. It was increased by up to 25% in the seated position, reduced by 7-26% during bicycling and by 30-50% during walking. An air velocity of 11 ms-1 reduced the surface air insulation by 50% in the standing position and 30% during walking.     

A novel approach for fit analysis of thermal protective clothing using three-dimensional body scanning

The garment fit played an important role in protective performance, comfort and mobility. The purpose of this study is to quantify the air gap to quantitatively characterize a three-dimensional (3-D) garment fit using a 3-D body scanning technique. A method for processing of scanned data was developed to investigate the air gap size and distribution between the clothing and human body. The mesh model formed from nude and clothed body was aligned, superimposed and sectioned using Rapidform software. The air gap size and distribution over the body surface were analyzed. The total air volume was also calculated. The effects of fabric properties and garment size on air gap distribution were explored. The results indicated that average air gap of the fit clothing was around 25–30 mm and the overall air gap distribution was similar. The air gap was unevenly distributed over the body and it was strongly associated with the body parts, fabric properties and garment size. The research will help understand the overall clothing fit and its association with protection, thermal and movement comfort, and provide guidelines for clothing engineers to improve thermal performance and reduce physiological burden.     

基于多特征融合的多尺度服装图像精准化检索

为了充分挖掘服装图像从全局到局部的多级尺度特征,同时发挥深度学习与传统特征各自在提取服装图像深层语义特征和底层特征上的优势,从而实现聚焦服装本身与服装全面特征的提取,提出基于多特征融合的多尺度服装图像精准化检索算法.首先,为了不同类型特征的有效融合,本文设计了基于特征相似性的融合公式FSF(Feature Similarity Fusion).其次,基于YOLOv3模型同时提取服装全局、主体和款式部件区域构成三级尺度图像,极大减弱背景等干扰因素的影响,聚焦服装本身.之后全局、主体和款式部件三级尺度图像分别送入三路卷积神经网络(Convolutional Neural Network,CNN)进行特征提取,每路CNN均依次进行过服装款式属性分类训练和度量学习训练,分别提高了CNN对服装款式属性特征的提取能力,以及对不同服装图像特征的辨识能力.提取的三路CNN特征使用FSF公式进行特征融合,得到的多尺度CNN融合特征则包含了服装图像从全局到主体,再到款式部件的全面特征.然后,加入款式属性预测优化特征间欧氏距离,同时抑制语义漂移,得到初步检索结果.最后,由于底层特征可以很好的对CNN提取的深层语义特征进行补充,故引入传统特征对初步检索结果的纹理、颜色等特征进行约束,通过FSF公式将多尺度CNN融合特征与传统特征相结合,进一步优化初步检索结果的排序.实验结果表明,该算法可以实现对服装从全局到款式部件区域多尺度CNN特征的充分提取,同时结合传统特征有效优化排序结果,提升检索准确率.在返回Top-20的实验中,相比于FashionNet模型准确率提升了16.4%."     

Limits of and possibilities to improve the IREQ cold stress model (ISO/TR 11079). A validation study in the field

Estimated insulation (Icl) of clothing worn by workers daily exposed to air temperatures between 0 and 15 degrees C was compared with the corresponding insulation calculated for thermal neutrality using the IREQ-model (IREQneutral, ISO/TR 11079). The goal was to determine possible limitations of the applicability of the IREQ-model and to stress to necessities and possibilities to improve the model. Sixteen female and 59 male workers (16-56 yr) were monitored during their work. According to their cold stress at the workplace they were allocated to three groups (33 persons were exposed to constant temperatures of more than 10 degrees C, 32 to less than 10 degrees C, and 10 persons experienced frequent temperature changes of 13 degrees C. Another categorization concerned workload (8 persons worked at metabolic rates of less than 100 W/m2, 50 persons worked at 101-164 W/m2, and 17 worked at more than 165 W/m2, respectively). The analysis of the differences between estimated worn insulation (Icl) and calculated IREQneutral revealed that the IREQ-model applies for air temperatures up to 15 degrees C and for temperature changes of 13 degrees C (at least) but needs to be improved with respect to gender. The IREQ model does not apply sufficiently for high and largely varying workloads (165 W/m2 and more). However, these situations are beyond the currently available possibilities to protect workers adequately with conventional clothing material. A suitable short-term measure is a more even work flow by avoiding activities with very high and low metabolic rates.