针对白车身轻量化系数的结构灵敏度分析与软件开发

为实现白车身轻量化,以白车身零件厚度为优化变量,建立参数化模型。定义白车身静态扭转刚度工况并进行有限元分析,得到扭转刚度响应和轻量化系数,采用解析法推导轻量化系数对厚度的灵敏度。基于HyperMesh二次开发完成灵敏度分析流程自动化,求解白车身轻量化系数的灵敏度。根据灵敏度排序对白车身零件厚度进行优化,实现轻量化系数降低,扭转刚度提高,白车身质量减轻。     

PIAnO在白车身轻量化设计上的应用

以某SUV车型的白车身为研究对象,采用高效的实验设计和优化软件PIAnO,综合考虑其模态、刚度、40%偏置碰和侧碰等性能进行轻量化设计。确定并优化设计变量,对白车身刚度和模态性能进行近似建模。提出分段优化方案并进行仿真验证,得到的白车身质量减少11.93 kg,下降3.08%。将该轻量化白车身的100%正碰、强度、IPI和NTF性能进行验证,满足设计要求,证明基于PIAnO的白车身轻量化策略行之有效。     

多目标轻量化的白车身隐式参数数值模拟

普通方法构建的白车身多目标轻量化设计模型存在精准度低、优化效果差的问题.通过隐式参数数值模拟方法,先对白车身构建隐式参数化模型,再通过非安全件轻量化优化设计和正面碰撞安全件轻量化优化设计实现白车身多目标轻量化.通过对该方法的性能优化验证及对比实验发现,经过多次迭代后,上述方法构建的白车身模型的精准度均大于90％,优化变化率大于8％.     

基于隐式参数化的车身多学科轻量化设计

为实现整车综合性能的快速方案验证和优化设计,在新车型设计阶段构建车身隐式参数化模型,并对其进行模态、刚度和安全等综合性能计算,验证参数化模型的有效性。基于灵敏度分析、试验设计（design of experiments, DOE）方法和近似模型优化等策略,对某白车身进行多学科轻量化设计。优化设计结果表明,白车身的模态、刚度和安全性能均满足设计要求。     

基于隐式参数化耦合模型的车身集成优化

为提高车身截面优化效率,基于SFE CONCEPT构建白车身关注部位的隐式参数化模型,并与白车身有限元非参数化模型进行耦合,使参数化模型与有限元模型耦合边界处的连接关系随截面变化自动更新,通过试验验证耦合模型的有效性。基于试验设计（design of experiments, DOE）方法、近似模型、多目标优化等策略,对白车身耦合模型进行刚度和模态等多学科集成优化,实现车身局部结构快速轻量化设计。     

非承载式SUV白车身结构分析及优化

以某全新开发的SUV非承载式车身为研究对象,建立V91车身有限元模型,并进行模态分析.为使车身1阶模态满足目标值要求,对车身进行灵敏度分析和截面刚度分析,并提出改进方案.经过优化,车身的1阶弯曲模态提升7.8%,1阶扭转模态提升25.7%.研究结果可为企业研发非承载式SUV车身提供参考.     

分析两端扭转弹簧约束下简支输流管道的动力特性

研究了两端受扭转弹簧约束的简支输流管道的固有频率特性和静态失稳临界流速.根据梁模型横向弯曲振动模态函数,由端部支承和约束边界条件得到了其模态函数的一般表达式.根据动力方程的特征方程,具体分析了约束弹性刚度、流体压强、流速和管截面轴向力等参数对管道固有频率特性和静态失稳临界流速的影响.数值分析表明,约束弹性刚度的增大使管道的固有频率和失稳临界流速明显提高;流体流速、压强和管截面受到的轴向压力的增加使管道的固有频率和失稳临界流速降低.当管道的固有频率和失稳临界流速较低时,可以通过增加端部约束的方法来提高.     

汽车车身静态刚度测量

针对目前我国汽车车身刚度检测设备的落后现状,采用现代微机检测与控制技术开发了一种新型的汽车车身静态刚度测量系统;该系统采用精密测量技术,用DSP2407采集多路数据,并利用工业控制计算机进行数据处理,在线检测汽车车身的刚度状况并以红旗轿车为例,对其白车身进行弯曲变形和扭转变形试验,检测汽车车身的刚度状况;该项目填补了全自动检测汽车车身静态刚度的空白,为国内首创.     

微型面包车承载式白车身的扭转、弯曲刚度有限元分析

本文应用国际上先进的分析元件I-DEAS Master Series7.0 对一种微型面包车承载式车身进行了扭转刚度、弯曲刚度有限元分析。研究出了一种同类型车承载式车身的扭转刚度、弯曲刚度的解算方法,同时反求出一些对整车性能影响较大的关键部位在额定扭转和弯曲载荷下的允许变形标准,为我国对该车型作后续自主改型开发提供设计依据。一、概述对于承载式车身结构而言,白车身的抗扭刚性和抗弯刚性是必须满足的基本性能之一。如果刚性不足,在使用过程中车体变形大,特别是立柱、门框、窗框等关键部位的变形过大,就可能造成门锁变形,内饰脱落…     

某SUV车架多目标拓扑优化设计

为得到同时满足刚度和动态要求的SUV车架,基于SIMP材料插值方法,分别以刚度最大和低阶模态固有频率最大作为优化目标建立拓扑优化模型,利用折中规划法建立多工况下刚度和低阶固有频率多目标优化模型,通过拓扑优化迭代得到新的SUV车架;对新车架进行仿真分析,得到其位移和应力分布及前4阶固有频率.其静态特性满足材料要求且有很大提高,第1阶固有频率提高到30.3 Hz,新车架质量减轻到193.3 kg.计算结果表明该方法能够很好地解决多目标下的结构优化问题。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate