KF/γ-Al2O3型固体超强碱催化合成肉桂酸的研究

苯甲醛与乙酐的Perkin反应合成肉桂酸，首次采用KF/γ-Al2O3固体超强碱催化剂，降低了反应温度，明显缩短了反应时间，最佳反应条件为n(苯甲醛)：n(乙酐)=1．0：3．0，反应时间1．5h，反应温度160℃，催化剂用量为苯甲醛质量的0．5％，所得的肉桂酸的产率可达81％以上。该催化剂具有较高的催化活性，易于回收，可重复使用5次以上。     

用KF/Al2O3催化合成肉桂酸的研究

采用KF/Al2O3催化剂催化合成肉桂酸.用新催化剂催化反应可以降低反应温度,缩短反应时间,提高肉桂酸的产率.探索出了最佳反应条件当反应温度控制在160℃,苯甲醛和乙酸酐的摩尔比1∶3,用6.0 g KF/Al2O3催化反应1.0 h,得到肉桂酸的产率为85.4%.     

用KF／Al2O3催化合成肉桂酸的研究

采用KF/Al2O3催化剂催化合成肉桂酸。用新催化剂催化反应可以降低反应温度，缩短反应时间，提高肉桂酸的产率，探索出了最佳反应条件；当反应温度控制在160℃，苯甲醛和乙酸酐的摩尔比1：3，用6.0gKF/Al2O3催化反应1.0h，得到肉桂酸的产率为85.4%。     

用KF／Al2O3催化合成肉桂酸的研究

采用KF/Al2O3催化剂催化合成肉桂酸，用新催化剂催化反应可以降低反应温度。缩短反应时间。提高肉桂酸的产率，探索出了最佳反应条件；当反应温度控制在16℃，苯甲醛和乙酸酐的摩尔比1：3，用6.0gKF/Al2O3催化反应1.0h，得到肉桂酸的产率为85.4%。     

合成肉桂酸的新方法

改变传统以碱性或中性催化剂合成肉桂酸的方法,而用固体酸SO4^-/MOO3^-TiO2作催化剂,对以苯甲醛和醋酸酐为原料合成肉桂酸的反应条件进行研究。结果表明：SO4^-/MOO3^-TiO2是合成肉桂酸的很好催化剂,最佳反应条件：醛酐物质量比1：3,最佳反应温度为140℃右,最佳催化剂量4．0g（其中苯甲醛用量为5．3g）,最佳反应时间为1．5h,催化剂最佳活化温度为500℃。在以上条件下,肉桂酸的产率可达到55．7％,且催化剂SO4^-/MOO3^-TiO2可重复使用性能好。     

KF/K2CO3/γ-Al2O3催化合成肉桂酸

以苯甲醛和丙二酸为原料,KF/K2CO3/γ-Al2O3为催化剂,经Knoevenagel反应,在无溶剂条件下催化合成了肉桂酸。产品用IR、1HNMR及元素分析进行表征。考察了催化剂用量、苯甲醛与丙二酸摩尔比和反应时间对肉桂酸收率的影响。结果表明:KF/K2CO3/γ-Al2O3具有良好的催化活性,较佳工艺条件为:苯甲醛10.2 mL(10.6 g,0.1 mol),n(苯甲醛)∶n(丙二酸)=1∶1.15,催化剂KF/K2CO3/γ-Al2O3用量2.5 g(含KF4.68 mmol),反应60 min,肉桂酸的平均收率达到92%以上。     

SO2-4/γ-Al2O3催化合成苯甲醛缩乙二醇

以SO2-4/γ-Al2O3为催化剂,以苯甲醛和乙二醇为原料进行缩合反应合成了苯甲醛缩乙二醇.考察了催化剂的制备条件如硫酸浸渍浓度、焙烧温度对催化活性的影响;同时也考察了反应条件如反应物摩尔比、催化剂用量、反应时间对苯甲醛转化率的影响.结果表明,SO2-4/γ-Al2O3是合成苯甲醛缩乙二醇的良好催化剂.催化剂的最佳制备条件为:硫酸浸渍浓度2.5 mol·L-1,焙烧温度650℃;最佳反应条件为:苯甲醛0.05 mol,n(苯甲醛):n(乙二醇)=1:2,催化剂1.0 g,带水剂环己烷5 mL,100℃回流反应120 min.此时苯甲醛转化率可达96.51%.催化剂可回收利用,回收效率取决于焙烧温度.     

固体超强酸SO42-/TiO2-MoO3-La2O3催化合成苯甲醛乙二醇缩醛

以固体超强酸SO42-/TiO2-MoO3-La2O3为多相催化剂,对以苯甲醛和乙二醇为原料合成苯甲醛乙二醇缩醛的反应条件进行了研究.实验表明:固体超强酸SO42-/TiO2-MoO3-La2O3是合成苯甲醛乙二醇缩醛的良好催化剂,较系统地研究了醛醇摩尔比、催化剂用量、反应时间诸因素对收率的影响.最佳反应条件为:n(苯甲醛):n(乙二醇)=1:1.6,催化剂用量为反应物料总质量的0.5%,环己烷为带水剂,反应时间60 min.上述条件下,苯甲醛乙二醇缩醛的收率可达84.6%.     

SO4^2-/γ-Al2O3催化合成苯甲醛缩乙二醇

以SO42-/γ-Al2O3为催化剂,以苯甲醛和乙二醇为原料进行缩合反应合成了苯甲醛缩乙二醇。考察了催化剂的制备条件如硫酸浸渍浓度、焙烧温度对催化活性的影响;同时也考察了反应条件如反应物摩尔比、催化剂用量、反应时间对苯甲醛转化率的影响。结果表明,SO42-/γ-Al2O3是合成苯甲醛缩乙二醇的良好催化剂。催化剂的最佳制备条件为：硫酸浸渍浓度2.5 mol.L-1,焙烧温度650℃;最佳反应条件为：苯甲醛0.05 mol,n（苯甲醛）∶n（乙二醇）=1∶2,催化剂1.0 g,带水剂环己烷5 mL,100℃回流反应120 min。此时苯甲醛转化率可达96.51%。催化剂可回收利用,回收效率取决于焙烧温度。     

K_2O/CaO-SBA-15催化大豆油制备生物柴油研究

通过浸渍法制备固体碱催化剂:K2O-SBA-15、CaO-SBA-15和K2O/CaO-SBA-15,用于催化大豆油和无水甲醇发生酯交换反应制备生物柴油,并进行X射线衍射(XRD),氮气吸附脱附表征。结果表明,负载固体碱后,没有改变介孔分子筛SBA-15的规则孔道结构,并且碱金属氧化物均匀负载在SBA-15的孔壁上。按三组分四因素的正交试验设计方案进行实验,表明各因素影响制备生物柴油的程度依次为:反应时间反应温度醇油摩尔比催化剂用量。反应的最佳条件为:以3%K2O/3%CaO-SBA-15为催化剂,反应温度60℃,反应时间3h,醇油摩尔比为16:1,催化剂用量为油重的3%,可得生物柴油产率为87.12%。     

钕-铝系稀土色料的研制

通过钕-铝系列色料合成实验,分析不同配比及不同矿化剂等对色料呈色效果的影响,确定最佳工艺方法。对实验结果进行XRD及色度分析,确定其主晶相为钕酸铝,试样的明度均在70以上,色彩鲜艳亮丽。     

Phase equilibrium in binary La2O3-Dy2O3 and ternary CeO2-La2O3-Dy2O3 systems

Cerium oxide doped with oxides of rare earth elements is a multifunctional material, a wide range of uses which is associated with its unique physicochemical properties. Phase diagrams of multicomponent systems are the physicochemical basis for the creation of new materials with improved characteristics.In this work, phase equilibria in ternary CeO₂–La₂O₃–Dy₂O₃ and binary La₂O₃–Dy₂O₃ systems in the whole concentration range were studied. No new phases have been identified in these systems. An isothermal section of the phase diagram of the CeO₂–La₂O₃–Dy₂O₃ system at a temperature of 1500 °С is constructed. No new phases have been detected in the system. It was found that in the studied ternary system solid solutions are formed on the basis of (F) modification of CeO₂ with structure of fluorite type, monoclinic (B), cubic (C) and hexagonal (A) modifications of Ln₂O₃.In the La₂O₃–Dy₂O₃ binary system (1500–1100 °С) three types of solid solutions are formed: based on hexagonal modification A-La₂O₃, monoclinic modification B-Dy₂O₃ and cubic modification C-Dy₂O₃ separated by two-phase fields (A+B) and (B+C), respectively. The boundaries of the regions of homogeneity of solid solutions based on A-La₂O₃ are determined by compositions containing 35–40, 20–25, 15–20 mol% Dy₂O₃ at 1500, 1250, 1100 °C, respectively. From the obtained data it follows that the solubility of Dy₂O₃ in the hexagonal modification of lanthanum oxide is 39 mol% at 1500 °C, 23 mol. % at 1250 °C and 16 mol% at 1100 °C. The limits of existence of solid solutions based on monoclinic B-modification are determined by compositions containing 30–35, 65–60 (1250 °С), 35–40, 55–60 (1100 °С) 40–45, 70–75 (1500 °C) mol% Dy₂O₃.In the studied system, with a decrease in temperature from 1500° to 1100°C, there is a decrease in the solubility of La₂O₃ in the crystal lattice of cubic solid solutions of C-type from 16 to 10 mol%.     

Fe2+/H2O2体系O2生成路径

掌握Fe²⁺/H₂O₂体系O₂的生成路径,可为避免H₂O₂无效分解,开发经济高效的Fe²⁺/H₂O₂体系利用技术指明方向。采用添加自由基捕获剂的方法,探究Fe²⁺/H₂O₂体系内各种自由基对O₂生成速率的影响,进而确定O₂的生成路径。结果表明:Fe²⁺/H₂O₂体系内不会产生大量O₂^-·,O₂^-·不是生成O₂的主要反应物质;O₂^-·被全部捕获后,体系中仍产生大量O₂^-·,但此时无O₂生成,证明生成O₂的反应由·OH和HO₂·两种自由基直接参与。分析认为反应·OH+HO₂·-H₂O+O₂是体系内O₂生成的主要路径。控制Fe²⁺/H₂O₂体系定向生成·OH,抑制HO₂·的产生,是提高Fe²⁺/H₂O₂体系中H₂O₂利用率的有效手段。     

Polycrystalline In2O3 and In2O3/Y2O3 photoanodes

Single crystal In₂O₃ shows promise as a photoanode for the decomposition of water. Because of various difficulties in the preparation of the single crystal material, two simple techniques were developed for the preparation of polycrystalline In₂O₃ anodes. One method involves the thermal decomposition of the nitrate while the other utilizes the chemical vapour deposition technique. Voltammograms and photoresponse spectra of these anodes are compared to the single crystal material. Among other observations, it is noted that the quantum efficiencies of the thermally decomposed films are comparable to the single crystal material. It is also shown that the on-set potential can be shifted to more negative values by forming the mixed oxide In₂O₃/Y₂O₃.     

Na2O-Al2O3-Fe2O3系烧结过程中铝、铁的反应行为

以Al2O3, Fe2O3和Na2CO3为原料,对Na2O-Al2O3-Fe2O3系烧结过程中的反应行为进行了详细研究. 基于溶出率与时间、温度的关系,证明Na2O×Al2O3和Na2O×Fe2O3的生成反应动力学都服从Zhuralev-Lesokin-Tempelman模型,表观活化能分别为186.59和80.92 kJ/mol,表明Na2O×Fe2O3比Na2O×Al2O3在动力学上更易形成;Al2O3易与Na2O×Fe2O3反应形成Na2O×Al2O3和Fe2O3,在1273 K烧结30 min,所得熟料Al2O3溶出率达98.51%;Fe2O3对Na2O×Al2O3的形成有双重作用,在1273 K下可加速Na2O×Al2O3的形成,超过1323 K,促使Na2O×Al2O3分解成Na2O和b-Al2O3,且随着温度升高或时间延长,分解程度增高,从而导致熟料中Al2O3溶出率显著降低.     

H2O2 / O3, H2O2 / UV And H2O2 / Fe2+ Processes For The Oxidation Of Hazardous Wastes

Activated hydrogen peroxide produces very reactive OH-radicals which destroy hazardous contaminants in water. The principles and different methods of activation are described. Results from laboratory studies show the numerous applications of this new technology. A successful scaleup of laboratory tests to an industrial level is discussed. Finally, a cost estimate for treating different types of water with hydrogen peroxide is presented.     

Propylene metathesis over Re2O7/Al2O3-B2O3 catalysts

A series of alumina aluminum borate (AAB) with various Al/B molar ratios were prepared by the coprecipitation method. The supported rhenium oxide catalysts with various contents of Re₂O₇ were also prepared by the impregnation method with perrhenic acid. The catalytic activity and stability of Re₂O₇/AAB catalysts for the reaction of propylene metathesis were tested in a fixed-bed microreactor. It was found that Re₂O₇/AAB is more active, stable and regenerable than Re₂O₇/Al₂O₃ for propylene metathesis. The optimum Al/B molar ratio was found to be in the range of 4–10.     

Barium aluminate hydrates—VI. 2BaO.Al2O3.5H2O and 2BaO.Al2O3.H2O

The compound 2BaO.Al₂O₃.5H₂O has been synthesised and studied by infra-red, X-ray and thermal analytical techniques. The compound of approximate formula 2BaO.Al₂O₃.H₂O forms as a dehydration product. The results are interpreted in terms of the known structure.