共查询到19条相似文献,搜索用时 78 毫秒
1.
2.
3.
对引起三聚氰胺装置CO2汽提塔压差波动的原因进行了分析,并通过减负荷冲洗、增加塔顶冲洗水量、提高操作压力等措施来避免结晶堵塞,使CO2汽提塔的工作状况有了很大的改善。 相似文献
4.
5.
介绍汽提塔衬里盖板泄漏情况,并对泄漏部位判断、安全性评估、泄漏部位特点进行分析。通过采取工艺维护和改进在线冲洗方式等措施,未出现泄漏扩大,实现汽提塔泄漏状态下安全运行。 相似文献
6.
介绍了3万t/a高压法三聚氰胺装置的工艺流程和主要设备——CO2汽提塔的基本结构,分析了CO2汽提塔内部塔盘结晶堵塞的原因。通过采用提高操作压力、增加冲洗水量、控制反应温度、改善工艺循环水质量等防范措施,并最终实施增设闪蒸槽的技术改造,彻底解决了结晶堵塞问题,保证了CO2汽提塔和三聚氰胺装置长周期稳定运行。 相似文献
8.
对三聚氰胺装置CO2汽提塔塔盘堵塞,压差升高原因及对其操作影响进行了分析,通过调整冲洗水量,蒸汽量,减负荷等措施来处理塔盘堵塞,避免压差波动,并提出操作优化建议,使CO2汽提塔运行达到最大可能稳定性. 相似文献
9.
详细分析了炼油企业酸性水汽提装置在长周期运行过程中出现问题的主要原因及处理措施,并提出了相应的改进措施.汽提装置的汽提塔下部塔盘、酸性水/净化水换热器及重沸器严重结垢,导致汽提塔塔盘温度、热进料温度和净化水出口温度异常波动、凝结水收集罐液位波动等问题,停车检修后分析结垢物的位置和性状,采取冲洗清理措施并对汽提塔重沸器操... 相似文献
10.
11.
尿素生产过程中,尿素汽提塔列管内壁结垢和列管管头部位泄漏、腐蚀断裂严重地影响了该设备的正常使用。应用化学清洗和局部更换列管管头技术,有效地解决了这一问题,通过实践检验,效果很好。 相似文献
12.
详细论证DBP/DIBP废水丁醇回收汽提塔的加热方式,提出革除汽提塔再沸器,将直接蒸汽冲管代替再沸器加热的方案,并从理论上证明了此项技术改造的可行性,认为此项技术改造能使汽提塔加热蒸汽耗量降降低14.31%,同时,论述了此项技术改造对汽提搭塔理论板层数,填料情况及工艺控制条件的影响。 相似文献
13.
14.
技术改造的内容:(1)将高压吸收塔下段的15层浮阀塔盘更换成高效散堆填料,洗涤乙酸的量提高至29 t/h。(2)将原常压洗涤塔继续作为氧化过程系统的备用释放通道,增加一个传质传热效果更好的常压洗涤塔,有效回收尾气中的乙酸甲酯。(3)更换原来处理能力较低的回收塔。由此使大部分原材料得到回收利用,单耗节省脱盐水1.5 t,乙酸降低3.5 kg,PX降低1.6 kg,装置实现低能、低耗以及绿色运行。 相似文献
15.
因渣油组分劣质化,引起气化炉出口废热锅炉结垢严重、炭黑洗涤塔筛水浊度超标、废水汽提塔填料堵塞等一系列生产问题.采取了有效措施,减少渣油品质对生产的影响,效果明显. 相似文献
16.
17.
18.
19.
Yongzheng Li Xiaolai Zhang Guangwei Zhai Haitao Zhang Tao Li Qiwen Sun Weiyong Ying 《中国化学工程学报》2019,27(10):2293-2303
Particle descent velocities in an annular stripper were measured by a laser Doppler velocimetry (LDV) system. In the radial direction, particle descent velocity was relatively constant in the mid-region of the stripper and increased towards the walls on both sides, exhibiting an anti-U-shaped distribution. Particle descent velocity in the radial mid-region increased with the increase of superficial gas velocity, and the maximum in the outer wall region increased significantly with the increase of solid mass flux. Superficial stripping gas velocity had stronger effect on particle velocity distributions near the stripper gas distributor, and such effect weakened with the increase of the distance from the distributor. Local particle velocity and its radial profiles could be adjusted by changing the superficial stripping gas velocity. Empirical formulas were established to describe the relationships between the local particle velocity and cross-sectional averaged velocity based on the effects of operating conditions and measuring positions. The result showed that the predicted data was in good agreement with the experimental value. 相似文献