共查询到20条相似文献,搜索用时 156 毫秒
1.
2.
3.
4.
5.
《中国石油和化工标准与质量》2013,(16)
文章以变压吸附分离工业废气中二氧化碳的研究进展为中心话题,介绍了碳的捕获和存储、氧化碳的分离工艺、氧化碳的捕获系统,分析了氧化碳的变压吸附分离技术进展、国内外变压吸附分离二氧化碳的工业应用进展、变压吸附分离二氧化碳工艺中存在的问题等相关内容,并对变压吸附分离工业废气中二氧化碳工艺作了展望。希望能够引起人们对这一问题的进一步关注,能够对将来的实际工作发挥借鉴指导作用。 相似文献
6.
《精细化工原料及中间体》2015,(8)
介绍了碳的捕获和存储,分析了二氧化碳分离工艺及捕获系统,探讨了二氧化碳变压吸附分离技术的进展、国内外变压吸附分离二氧化碳的工业应用进展。另外,还指出了变压吸附分离二氧化碳工艺中存在的问题,并就这些问题提出相应的改进策略,希望能够为实际工作提供指导与参考。 相似文献
7.
过量的二氧化碳气体排放造成了全球变暖,二氧化碳的捕集与封存(CCS)势在必行。与传统的液体胺吸附技术相比,固体吸附材料有吸附量高、再生能耗小、循环稳定性好等优点。本文主要介绍了一些典型的二氧化碳多孔吸附材料,如碳基材料、沸石、介孔二氧化硅、MOFs、胺基负载材料等的结构特点及研究进展。 相似文献
8.
9.
金属氧化物捕获二氧化碳(CO2)技术是减少碳排放的有效手段,然而其在捕获CO2方面存在吸附容量低和易板结等问题。目前,熔盐改性金属氧化物可有效解决以上问题。以水滑石类衍生镁铝氧化物、氧化镁和氧化钙为研究对象,综述了掺杂熔盐(如硝酸盐、亚硝酸盐、碳酸盐等)对金属氧化物捕获CO2性能的影响,分析了熔盐的改性机制,归纳了金属氧化物捕获CO2的应用进展。未来应更多关注熔盐掺杂体系设计、低成本高选择性吸附材料研发以及CO2捕获机制研究。同时,在实验中应尽可能模拟实际工况,为后续大规模工业应用提供支持。 相似文献
10.
11.
固体吸附法捕集二氧化碳技术具有吸/脱附性能优良、设备轻便灵活、环保和低成本的优势,被认为是实现电厂烟气中碳捕集最具前景的技术之一。国内外学者对于可应用于电厂烟气中二氧化碳捕集的固体吸附材料开展了大量的研究并取得一定进展。该文综述了近些年沸石分子筛、金属有机框架材料(MOFs)和活性炭(ACs)等吸附材料的研究现状;归纳并分析了各类吸附材料的应用优势和在工程应用中存在的问题;总结了各类材料吸附性能的主要影响因素和吸附机理等。最后,展望了固体吸附材料的发展方向。 相似文献
12.
13.
随着全球气候变暖,二氧化碳的捕集、利用和封存(CCUS)逐渐成为科学界和工业界的研究热点。CCUS的关键是选择性地从气体混合物中捕集二氧化碳。目前二氧化碳捕集技术包括化学吸收、膜分离、吸附和低温分离等。吸附法是利用吸附剂对不同气体的吸附能力差异来进行二氧化碳捕集。综述了分子筛、介孔二氧化硅、黏土及多孔碳等无机固体吸附剂在二氧化碳捕集应用中的研究进展。对比了不同改性方法对吸附剂吸附二氧化碳性能的影响。从应用角度来看,分子筛、介孔二氧化硅、黏土具有潜在的成本效益,但仍需在工程设计开发方面得以进一步发展,以适用于不同应用需求的二氧化碳捕集。 相似文献
14.
Tao Zhu Seil Yang Dae Ki Choi Kyung Ho Row 《Korean Journal of Chemical Engineering》2010,27(6):1910-1915
To find an ideal adsorbent for carbon dioxide capture, a new polyethyleneimine modified silica gel material was synthesized
with a simple procedure. Three silica gel materials with various particle sizes (15, 25 and 40–63 μm) were prepared and functionalized
with polyethyleneimine. The carbon dioxide adsorption amounts of modified silica gel and non-modified silica gel were calculated
using a mass balance equation at three different temperatures (298.15, 308.15 and 318.15 K), respectively, and the influence
of gas pressure and particle size on adsorption was discussed. Experimental data showed that the carbon dioxide adsorption
capacity of modified silica gel was better than non-modified silica gel, and the adsorption capacity gradually decreased with
increasing particle size. The smaller particle size (15 μm) PEI modified silica gel had the largest adsorption capacity, at
298.15 K, and the adsorption amounts of various particle sizes of PEI-silica better fit the Langmuir isotherm model. 相似文献
15.
16.
Masahiro Shimada Hisashi Hamabe Takahiko Iida Kensuke Kawarada Takayuki Okayama 《Journal of Porous Materials》1999,6(3):191-196
Activated carbon is a porous material made by activation of carbon materials, such as coal, by steam or carbon dioxide gas to form numerous micropores on the surface which gives the material high adsorption characteristics and it is widely used as a purifier for water and air. In this research, to develop a new use for waste paper, activated carbon was prepared from waste newsprint paper and its adsorption characteristics were measured. As a result, activated carbon with an iodine adsorption capacity of 1310 mg/g, a methylene blue adsorption capacity of 326 mg/g and a specific surface area of 1000 m2/g was obtained. These adsorption capacities were almost the same as ordinary activated carbon on the market. 相似文献
17.
直接空气捕集(DAC)等新兴负碳排放技术是实现“双碳”目标的托底技术保障,近年来受到广泛关注。本文简要分析了直接空气碳捕集技术的特性,归纳总结了胺功能化无机材料和聚合物、金属氢氧化物和碳酸盐、多孔材料等痕量二氧化碳捕集性能,初步分析了负载方式、载体结构等与吸附容量和动力学的关系。浅析了该领域发展面临的问题和机遇,从能耗和性能方面对捕集材料和技术的研发提出以下建议:相较于物理吸附材料,胺功能化材料和固体碱等化学吸附材料具有更好的应用前景;在工艺开发领域,可以借鉴其他低浓度气体深度脱除工艺的经验;另一方面,可以结合不同工艺优势,设计多种工艺耦合的流程;最后,在严峻的环境问题下,必须加快材料研发的步伐,未来的研究重点应集中在材料的设计和低能耗再生方式的开发上。 相似文献
18.
半导体光催化剂被广泛地应用于光催化领域,但其常因自身的禁带宽度较大、量子效率较低、催化效率较低、与反应物接触几率较低等因素在实际应用中受到诸多限制。而碳基材料作为一类结构稳定的新材料,具有稳定性强、导电能力强、比表面积大、包含大量的吸附位点等特性,与光催化剂复合之后,能够有效减小其禁带宽度、降低其载流子的复合率并为其提供更多的吸附位点,很大程度上提高了光催化剂的光催化性能。该文章以石墨烯、碳纳米管、富勒烯以及碳纤维等碳材料与各类半导体光催化剂复合为例,综述了碳基材料与光催化剂复合的工艺、提高其光催化性能的机理、影响碳基材料改性程度的因素及其在产氢、杀菌等方面的应用,并且对其进行了展望。 相似文献
19.
燃烧后CO_2捕集技术研究 总被引:1,自引:0,他引:1
对燃烧前、燃烧后CO2捕集以及富氧燃烧3种CO2捕集技术的特点,以及适用于燃煤电厂的燃烧后CO2捕集技术进行了介绍,分析了吸收分离法、吸附分离法和膜分离法的原理及优缺点。其中,化学吸收法应用最广,但再生能耗大,运行成本高;吸附法虽再生能耗小,但对CO2选择性低,吸附能力有限;膜分离法目前仍处于实验室研究阶段,但应用前景巨大。对上述技术整合形成复合技术以及对新材料进行开发将有助于克服现有CCS技术面临的困难。 相似文献
20.
Global warming and associated global climate change have led to serious efforts towards reducing CO2 emissions through the CO2 capture from the major emission sources.CO2 capture using the amine func-tionalized adsorbents is regard as a direct and effective way to reducing CO2 emissions due to their large CO2 adsorption amount,excellent CO2 adsorption selectivity and lower energy requirements for adsor-bent regeneration.Moreover,large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO2 capture in the past few years.In view of this,we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica,zeolite,porous carbon materials,metal organic frameworks(MOF)and other composite porous materials.In addition,amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources.Considering the importance of the stability of the adsorbent in practical applications,advanced research in the capture cycle stability has also been summarized and analyzed.Finally,we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture. 相似文献