Prediction of pressure fluctuations and minimum fluidization velocity of binary mixtures of geldart group b particles in bubbling fluidized beds

A simple method was proposed to find the pressure fluctuations of binary systems of Geldart Group B particles under bubbling fluidized bed conditions. The pressure fluctuations of binary systems could be predicted from the pressure fluctuations of the individual particles component which comprised the binary systems for completely mixed and partially mixed systems. The predicted pressure fluctuations could be used to calculate the minimum fluidization velocity of the binary systems. The predicted and experimental values of pressure fluctuations and the minimum fluidization velocity of binary systems were in fairly good agreement.     

Classifying the fluidization and segregation behavior of binary mixtures using particle size and density ratios

Experimental investigations show that fluidized binary mixtures exhibit varied pressure drop profiles and segregation patterns, depending on the level of disparity due to size and/or density differences. In this study, different mixture types are mapped on a graph of density versus size ratios. It is found that the ratio of the minimum fluidization velocities of individual components can be used to categorize these mixtures. A simple correlation is developed to compute the ratio of the minimum fluidization velocities based on the density and size ratios. Categorizing the binary mixtures in this manner gives a qualitative understanding of how the different mixtures behave on fluidization. © 2010 American Institute of Chemical Engineers AIChE J, 2011     

Bubbling fluidization of biomass and sand binary mixtures: Minimum fluidization velocity and particle segregation

Understanding the minimum fluidization velocity of biomass and sand mixtures is fundamental to ensuring the optimal performance of fluidized beds in a thermo-conversional process, such as fast pyrolysis. The present work aimed to determine the minimum fluidization velocity of binary mixtures using the characteristic diagram of pressure drop in the bed and to develop an experimental correlation for the minimum fluidization velocity of biomass and sand mixtures. Three types of biomass (sweet sorghum bagasse, waste tobacco and soybean hulls) and four sands with different sizes were investigated. The results showed that the fluid dynamic behavior of binary mixtures is directly related to the biomass size and shape. For sweet sorghum bagasse (more irregular particles), higher biomass percentages led to lower minimum fluidization velocities, which differed from the behaviors observed for waste tobacco and soybean hulls. The diameter ratio inert/biomass effectively influenced the segregation, with a higher ratio causing more pronounced bed segregation. A good fluidization regime (with little segregation) for biomass and sand mixtures was obtained using the smallest sand (d₅₀ = 0.35). Considering the studied operating conditions, the proposed correlation can be used satisfactorily to predict the minimum fluidization velocities for mixtures of biomass and sand in fluidized beds.     

大差异双组分混合颗粒的最小流化特性

在一套f260 mm′2000 mm的有机玻璃实验装置中,对大差异双组分混合颗粒的最小流化特性进行了实验研究,得到了混合颗粒的流化曲线,由此给出了其起始流化速度、最小流化速度、临界分离速度、完全流化速度等特征速度. 实验结果表明,流化过程可分为4个阶段,即完全流化、大小颗粒分离、大颗粒静止小颗粒流化、固定床阶段,对应混合颗粒的3个状态：完全混合、部分混合部分分离、完全分离状态;混合颗粒的特征速度随小颗粒质量分率的增加而减小,且在小颗粒质量分率达到0.4~0.5后其减小的趋势减缓;混合颗粒的固定床阶段和完全流化阶段的床层空隙率及混合颗粒的体积收缩比在小颗粒质量分率为0.4时达到极值.     

Minimum Fluidization Velocities of Binary Solid Mixtures: Empirical Correlation and Genetic Algorithm-Artificial Neural Network Modeling

Experimental investigation of the fluidization behavior in single and binary solid-liquid fluidized beds of nonspherical particles as solid phase and water as liquid phase was performed in a Perspex column. Different particle sizes were used to prepare single and binary mixtures with different weight ratios for fluidization. Minimum fluidization velocity increased with increasing average particle size and decreasing sphericity for the binary mixture. An empirical correlation was developed to predict the minimum fluidization velocity. Genetic algorithm-artificial neural network (GA-ANN) modeling was applied to predict the minimum fluidization velocity for single and binary solid-liquid fluidized beds. The application of GA-ANN analysis leads to designing binary solid-liquid fluidization systems without experimentation.     

PVC类废塑料在冷态流化床中流化行为的研究

在Φ50 mm×800 mm圆柱体的冷态流化床反应器中,对PVC类废塑料、石英砂及其混合物的流化特性进行了研究。研究了PVC颗粒粒径与混合物料中PVC质量分数对混合物料的流化特性的影响规律,得到指导热态实验的关键参数。实验结果表明,PVC颗粒粒径与混合物料中PVC质量分数会影响混合物料的最小流化速度,也影响PVC颗粒与石英砂混合的均匀度。混合物料中PVC的质量分数越小,其最小流化速度就越小,混合物料也越容易实现充分混合;PVC颗粒为Geldart B类颗粒,但由于形状不规则,黏性力大,塌落特性明显,流化性能较差,显示出C类颗粒的流化特性,同时实际的最小流化速度要大于理论最小流化速度。PVC与石英砂混合物料冷态流化行为的研究结果为热态流化床降解PVC颗粒提供了基础数据和实践依据。     

Inverse fluidization using non-Newtonian liquids

Experiments have been carried out to determine the minimum inverse fluidization velocity using single and binary systems of four different solids of polymeric origin, and four different non-Newtonian liquids in two different columns. Empirical correlations have been developed to predict the minimum inverse fluidization velocity as a function of physical and dynamic variables of the system. Statistical analysis of the correlation suggests that is of acceptable accuracy with correlation coefficient more than 0.99.     

Critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas-solid tapered fluidized beds

Recently, tapered fluidized bed has become more attractive because of the problems associated with conventional (cylindrical) beds like fluidization of widely distributed particles, entrainment of particles and limitation of fluidization velocity. There have been some investigations on hydrodynamics of uniform single size particles but there have been no detailed studies of homogeneous binary mixture of particles of different sizes and different particles in tapered beds. In the present work, an attempt has been made to study the hydrodynamic characteristics of homogeneous binary mixture of irregular particles in tapered beds having different tapered angles. Correlations have been developed for important characteristics, especially critical fluidization velocities and maximum bed pressure drops of homogeneous binary mixture of irregular particles in gas-solid tapered fluidized beds. Experimental values of critical fluidization velocities and maximum bed pressure drops have been compared with the developed correlations.     

Fluidization regimes in two‐ and three‐phase fluidized beds: Comparison between measurement techniques

Fluidization regimes were studied in liquid‐solid and gas‐Liquid‐solid fluidized beds. The liquid velocities at which regime transitions occur in liquid‐solid and gas‐liquid‐solid systems were obtained for monosize and multicomponent systems. Minimum fluidization, complete fluidization and complete mixing velocities of particles were obtained from pressure drop measurements, a collision technique or a conductivity method. The collision technique provided accurate complete fluidization and complete mixing velocities by measuring directly the particle motion. The conductivity technique, which is easier to implement, gave similar but less accurate results.     

稻草及热解半焦颗粒流化特性

研究了稻草及不同温度热解半焦颗粒在内径100 mm、高1000 mm的有机玻璃流化床中的流化特性. 结果表明,稻草颗粒无法单独流化,而其热解半焦颗粒可单独流化;半焦颗粒的最小流化速度随粒径增大而增大,与床层高度无关,筛分粒径为0.45~0.9, 0.18~0.45, 0.125~0.18 mm的半焦颗粒的最小流化速度分别为0.19, 0.16, 0.14 m/s;300~550℃温度范围内稻草热解半焦颗粒的流化特性无明显区别;半焦与稻草颗粒混合流化时,稻草颗粒不大于20%(w)时床层有较好的流化质量,混合颗粒的最小流化速度都随混合颗粒中稻草含量增大而增大.     

铁基载氧体与干化市政污泥二元混合物流化特性

化学链燃烧技术处置污泥可有效抑制有害气体排放，但干化污泥与铁基载氧体的物理性质相差较大，在流化床内会产生混合分离等问题。在内径(φ)为100 mm的有机玻璃冷态流化床装置上，进行了干化污泥与载氧体二元颗粒流化实验，讨论了颗粒粒径大小、干化污泥与载氧体质量比和操作风速对二元颗粒流化特性的影响。结果表明，污泥与平均粒径为0.66 mm的载氧体能实现混合流化，最小流化速度 和最小混合操作风速Um相等；污泥与平均粒径为1.46 mm的载氧体流化时，随操作风速增大，逐渐由分离流化状态过渡到混合流化状态，Um? ；污泥与平均粒径为2.43 mm的载氧体流化时，始终保持分离流化状态。基于提出的表征混合/分离流化状态的无量纲数Gd，当00.8时处于分离流化。     

CFD–DEM modeling of gas fluidization of fine ellipsoidal particles

Particle characteristics are important factors affecting gas fluidization. In this work, the effects of both particle size and shape on fluidization in different flow regimes are studied using the combined computational fluid dynamic–discrete element method approach. The results are first analyzed in terms of flow patterns and fluidization parameters such as pressure drop, minimum fluidization, and bubbling velocities. The results show that with particle size decreasing, agglomerates can be formed for fine ellipsoidal particles. In particular, “chain phenomenon,” a special agglomerate phenomenon exists in expanded and fluidized beds for fine prolate particles, which is caused by the van der Waals force. The minimum fluidization velocity increases exponentially with the increase of particle size, and for a given size, it shows a “W” shape with aspect ratio. A correlation is established to describe the dependence of minimum fluidization velocity on particle size and shape. Ellipsoids have much higher minimum bubbling velocities and fluidization index than spheres. © 2015 American Institute of Chemical Engineers AIChE J, 62: 62–77, 2016     

压力脉动法预测硅粉颗粒最小流化速度的实验

应用压力传感器研究了不同筛分粒径的硅粉的流化性质，证实流化床层的压力脉动标准方差σp随着表观气速的增加而线性增大, 根据σp=0的条件即可确定流化床的初始流化气速Umf. 此Umf与传统压降变化法得到的实验结果基本一致. 对测得的不同筛分粒级的硅粉的Umf进行拟合，得到了Umf与相应粒级平均粒径的关联式Umf=0.014e10(d–0.28)–0.012e–10(d–0.28)+0.065. 对双粒级复配混合颗粒体系的σp进行的实验研究发现，其σp介于相关单粒级体系的σp之间，并且粗颗粒组份的比例对σp的影响较大.     

湿污泥颗粒的流化床干燥实验及模型

在鼓泡流化床内以河砂为干燥介质,对单颗粒湿污泥的流态化干燥特性进行实验研究,得到了流化床温度、污泥初始水分、污泥粒径及流化速度对干燥速率的影响规律：流化床温度及污泥粒径对干燥速率的影响都呈指数规律;污泥的水分越大,干燥速率越大;在鼓泡流化床流化速度达到2倍临界流化速度以上时,充分流化,流化速度再增大(2~5倍临界流化速度)对干燥速率没有明显影响. 在基本的扩散传质理论的基础上,利用实验数据回归得到湿污泥在鼓泡流化床内干燥的半经验模型,为流化床污泥干燥器的设计提供了基础数据和依据.     

Fluidization characteristics of oil palm frond particles in agitated bed

Fluidization characteristics of crushed oil palm fronds were studied. The elongated shape of the particles and their fibrous nature created entanglement between the particles and caused the bed to form crack and plug flow when aerated in ordinary fluidized bed. Fluidization of the fibres became feasible with the aid of mechanical agitation. Agitation helped to loosen the entanglement of the fibres which prevents air to pass through the bed of particles, as a result, fluidization state could be attained. Experiments were carried out in a column with height of 72 cm and ID of 14.4 cm. Superficial air velocities used ranged from 0.1 to 1.1 m/s, bed heights ranged from 4 to 8.5 cm, agitation speeds ranged from 300 to 500 rpm and particle initial moisture contents from 0.5 to 2.4 g water/g dry solids. Analysis of the fluidization characteristics showed that minimum fluidization velocity was independent with bed height and agitation speed. However, investigation on the effect of particle initial moisture content showed that minimum fluidization velocity increased with particle moisture content. A new empirical correlation to predict minimum fluidization velocity has been derived which gives good agreement with experimental data in this study and the data from other study in the literature.     

Investigation of fluidized bed behaviour using electrical capacitance tomography

The temporal and cross-sectional distributions of particles in a 127 mm diameter fluidized bed have been obtained using a new generation, high-speed electrical capacitance tomography. Two planes of eight electrodes were used and mounted at 160 and 660 mm from the gas distributor which was a 3 mm thick porous plastic plate (maximum pore size of 50-70 μ m). 3 mm diameter, nearly-spherical polyethylene granules made up the bed. Experiments at sampling frequencies of 200-2000 cross-sections per second and gas superficial velocities from just below the minimum fluidization to 83% above minimum fluidization velocities were used. The time series of the cross-sectional average void fractions have been examined both directly and in amplitude and frequency space. The last two used probability density functions and power spectral densities. The information gathered shows that the fluidized bed was operating in the slugging mode, which is not surprising given the size of the particles. It has been found that an increase in the excess gas velocity above the minimum fluidization velocity resulted in an increase in the mean void fraction, an increase in the length and velocity of the slug bubbles as well as the bed height, and a slight decrease in the slug frequency. The results are presented in a level of detail suitable for comparison with later numerical simulation.     

Minimum fluidization velocity and gas holdup in gas–liquid–solid fluidized bed reactors

Experiments were performed to study the hydrodynamics of a cocurrent three‐phase fluidized bed with liquid as continuous phase. Based on the 209 experimental data (with four liquid systems and five different particles) along with 115 literature data from six different sources on minimum fluidization velocity, a unique correlation for the estimation of minimum fluidization velocity in two‐phase (u_g = 0) as well as in three‐phase systems is developed. A data bank consisting of 1420 experimental measurements for the fractional gas phase holdup data with a wide range of variables is used for developing empirical correlations. Separate correlations are developed for two flow regimes observed in this present work. The proposed correlations are more accurate and simpler to use. © 2002 Society of Chemical Industry     

污泥颗粒与河砂混合流化特性的实验研究

在内径f105 mm、高800 mm的冷态流化床实验装置上进行了污泥颗粒与河砂混合流化特性的实验研究,获得了污泥颗粒水分、污泥颗粒与河砂的质量比对混合物料的流化特性的影响规律. 实验结果表明,污泥颗粒的水分、污泥颗粒与河砂的质量比会影响混合物料的最小流化速度,也影响污泥颗粒与河砂混合的均匀程度. 污泥颗粒的质量比越大,混合物料的最小流化速度越大;污泥颗粒的水分含量越高,混合物料的最小流化速度也越大;污泥颗粒与河砂的质量比越接近1:1,越容易实现充分混合. 在对实验数据进行分析处理的基础上,提出了污泥颗粒与河砂混合物料的最小流化速度经验方程,为流化床污泥颗粒干燥工艺提供基础数据和设计依据.     

单组分颗粒振动流化床的流体力学研究（2）──床层膨胀和起始流化速度

本文在振动流化床中研究床层膨胀和颗粒的起始流化速度,分别研究颗粒物性、振动特性（频率、振幅）和静止床层高度对它们的影响,根据不同的振动条件下Ｇｅｌｄａｒｔ’Ａ、Ｂ、Ｄ类１３种物料起始流化速度的实验结果,关联了实验条件下起始流化速度的计算式,此计算式对振动流化床的设计具有指导意义。     

超细颗粒在声场流化床中的流化特性

在内径为130mm的声场流化床中,以原生纳米级SiO2超细颗粒为物料,在声压水平为0～140dB、声波频率为0～500Hz范围内系统地考察了声波对超细颗粒流化特性的影响。结果表明：当声波频率为100～150Hz、声压大于130dB时,声波可以有效地消除节涌、抑制沟流、降低临界流化速度,显著地改善纳米SiO2颗粒的流化质量。在频率一定的情况下,声压越高,超细颗粒的临界流化速度越低,流化质量越好。当频率低于100Hz或高于150Hz时,随着频率的进一步降低或增加,超细颗粒的临界流化速度都增大,甚至又出现节涌和沟流。声波的效果减弱甚至消失。