无线传感网络中基于蚁群的路由算法

In the wireless sensor networks, high efficient data routing for the limited energy resource networks is an important issue. By introducing Ant-colony algorithm, this paper proposes the wireless sensor network routing algorithm based on LEACH. During the construction of sensor network clusters, to avoid the node premature death because of the energy consumption, only the nodes whose residual energy is higher than the average energy can be chosen as the cluster heads. The method of repeated division is used to divide the clusters in sensor networks so that the numbers of the nodes in each cluster are balanced. The basic thought of ant-colony algorithm is adopted to realize the data routing between the cluster heads and sink nodes, and the maintenance of routing. The analysis and simulation showed that the proposed routing protocol not only can reduce the energy consumption, balance the energy consumption between nodes, but also prolong the network lifetime.     

无线传感网络移动分簇路由策略

无线传感网络(WSN)路由协议中,分簇路由具有拓扑管理方便、能量高效和数据融合简单等优点,成为当前重点研究的路由技术。通过研究各种环境下的移动传感器网络,有效地降低能耗则是研究移动无线传感器网络的重要目的之一。针对无线传感网络中移动性问题,基于LEACH协议,利用移动传感器网络中节点距离、速度和剩余能量等因素提出了能量高效的移动分簇路由算法。实验结果表明此算法能够较好地支持节点移动,从而降低网络能耗,延长网络生存时间。     

能量采集型无线传感器网络的高能效路由算法

在能量采集型无线传感器网络中,虽然有能量吸收,但是因能量依然非常珍贵,如何优化路由协议,提高能量利用率,延长网络寿命仍然是值得研究的问题.为求解高能效的路由,提出了一种采用遗传算法的高能效路由算法,建立考虑节点的吸收能量、剩余能量、消耗能量和浪费能量的适应函数,用遗传算法寻找全局最优路径.将该适应函数与3种其他适应函数作对比,其他3种适应函数分别为只考虑路径能耗最小的适应函数,考虑路径能耗与路径上节点的吸收能量、剩余能量的适应函数以及考虑路径能耗与网络中所有节点的浪费能量的适应函数.采用遗传算法解出4种路由,通过仿真分析可知,所提出的路由算法能量利用效率最高.     

An ant colony optimization based routing algorithm for extending network lifetime in wireless sensor networks

Reducing the energy consumption of network nodes is one of the most important problems for routing in wireless sensor networks because of the battery limitation in each sensor. This paper presents a new ant colony optimization based routing algorithm that uses special parameters in its competency function for reducing energy consumption of network nodes. In this new proposed algorithm called life time aware routing algorithm for wireless sensor networks (LTAWSN), a new pheromone update operator was designed to integrate energy consumption and hops into routing choice. Finally, with the results of the multiple simulations we were able to show that LTAWSN, in comparison with the previous ant colony based routing algorithm, energy aware ant colony routing algorithms for the routing of wireless sensor networks, ant colony optimization-based location-aware routing algorithm for wireless sensor networks and traditional ant colony algorithm, increase the efficiency of the system, obtains more balanced transmission among the nodes and reduce the energy consumption of the routing and extends the network lifetime.     

基于节点信任值的安全层次路由协议

由于无线传感器网络容易受到攻击,所以保证无线传感器在网络数据传输过程中的路由安全是必要的,文中提出一种基于节点信任值、节点度和距离的簇头选举算法,进行路由主干节点的可信选举,建立安全可信的层次路由。仿真结果表明,该算法可有效评估节点的信任值,解决了节点失效或被俘获所导致的层次路由安全问题。     

A New Energy Efficient Hierarchical Routing Protocol for Wireless Sensor Networks

Wireless sensor networks consist of low cost sensor nodes which have limited power supplies, memory capacity, processing capability and transmission rate. Sensor nodes gather information from the environment and send the collected information to base station with help of a routing cooperation. Because of limited resources in Wireless Sensor Networks, fulfilling these routing operations is a major problem. Routing protocols are used to perform these operations. The most important thing by considering while these protocols are designed is energy efficiency. Because wireless sensor networks are widely used in intelligent systems, the energy efficiency of these networks is very important in IoT. Researchers have proposed several hierarchical routing protocols such as LEACH, PEGASIS, TEEN and APTEEN. In this study, an energy efficient routing protocol is developed which is more efficient than currently avaliable routing protocols. The developed protocol involves mapping of the network, sleep–wake/load balancing, data merge processes. The proposed protocol gives better results than other protocols in number of surviving nodes and amount of energy consumed criterias.     

基于CPK和能量的安全路由算法

无线传感网是由大量传感器节点组成的网络,具有无线通信、自组织、无中心的组网特性。针对无线传感器网络面临的众多安全问题,从组合公钥和节点能量入手,对LEACH进行改进,提出了一种基于CPK和能量的安全有效路由算法。通过仿真实验,改进的路由协议比LEACH具有更长的寿命,而且在安全性方面也进一步加强了。     

Up-Down Links Dualpath Greedy Routing Protocol for Wireless Sensor Networks

Greedy geographic routing is attractive in wireless sensor networks because of its efficiency and scalability. This paper presents an up-down links dualpath greedy routing (UDLDGR) protocol for wireless sensor networks. The routing protocol not only reserves the features of greedy forwarding algorithm, which is simple, efficient, but also uses different relay nodes to serve as routing nodes for up and down routing paths, makes the energy consumption more balanced. The greatest advantage of UDLDGR is it trades off only small cost for the source node to obtain two different transmission paths information. The multipath strengthens the network reliability, such as load balancing and robustness to failures. Our simulation results show that UDLDGR can improve system lifetime by 20–100% compared to single path approaches.     

一种能量均衡的无线传感器网络协议

提出了一种能量均衡的无线传感器网络协议。在此协议中,用以基站为圆心一定距离为半径的环状带将目标网络覆盖区域分为三部分,靠近圆心的节点和环状带内节点采用单跳方式直接跟基站通信,环状带以外的节点采用多跳方式跟环状带内节点通信;节点保存多条到基站的最短路由,采用轮循机制选择一条路由传输数据,从而将数据传输任务均衡的分配到多条线路上;当环状带内节点的能量值达到一个阀值时修改环状带的半径和宽度,重新组网,从而将即将形成的"热区"转移到其他区域,达到延长无线传感器网络的生命周期。     

Multi-factor and Distributed Clustering Routing Protocol in Wireless Sensor Networks

One of important issues in wireless sensor networks is how to effectively use the limited node energy to prolong the lifetime of the networks. Clustering is a promising approach in wireless sensor networks, which can increase the network lifetime and scalability. However, in existing clustering algorithms, too heavy burden of cluster heads may lead to rapid death of the sensor nodes. The location of function nodes and the number of the neighbor nodes are also not carefully considered during clustering. In this paper, a multi-factor and distributed clustering routing protocol MFDCRP based on communication nodes is proposed by combining cluster-based routing protocol and multi-hop transmission. Communication nodes are introduced to relay the multi-hop transmission and elect cluster heads in order to ease the overload of cluster heads. The protocol optimizes the election of cluster nodes by combining various factors such as the residual energy of nodes, the distance between cluster heads and the base station, and the number of the neighbor nodes. The local optimal path construction algorithm for multi-hop transmission is also improved. Simulation results show that MFDCRP can effectively save the energy of sensor nodes, balance the network energy distribution, and greatly prolong the network lifetime, compared with the existing protocols.     

Performance Analysis of Adaptive Routing Structure for Wireless Sensor Network Based on Load Balancing

Wireless sensor network consists of sensor nodes with battery operated device. The key challenges in the wireless sensor network are energy consumption and routing optimization. This work presents the cluster based load balancing (CBLB) routing protocol. The proposed routing protocol is used to minimize the energy consumption and increase the routing performance. It avoids the routing robustness, delay and increases the delivery rate and network performance. In existing techniques, different routing protocols such as LEACH, HEED and MESTER were used to increase the network performance and to decrease the energy consumption. But these existing techniques did not satisfy the performance requirements of wireless sensor networks. Hence, there is a requirement to develop a technique that meets the QoS requirements and needs of wireless sensor network. The proposed CBLB routing protocol creates a cluster head in the decentralized network and the cluster head will be used to distribute the workload evenly to the cluster members for reducing the energy consumption in wireless sensor network. Experimental results analyze the performance of the proposed protocol with the different existing protocols. The proposed protocol achieves high throughput, delivery rate and reduces the energy consumption, delay and routing overhead.     

无线传感器网络路由中的能量预测及算法实现

基于无线传感器网络中路由协议高效合理利用能量的要求,提出一种基于剩余能量预测的地理位置路由(EPGR,energy prediction and geographical routing)算法。算法通过建立传感器网络节点运作模型,及相邻节点剩余能量预测机制,优化路由选择。仿真和分析表明,EPGR算法能够有效地优化数据传输路径,均衡传感器网络节点的能量消耗,延长网络寿命。     

Analysis of tree‐based multicast routing in wireless sensor networks with varying network metrics

Wireless ad hoc and sensor networks are emerging with advances in electronic device technology, wireless communications and mobile computing with flexible and adaptable features. Routing protocols act as an interface between the lower and higher layers of the network protocol stack. Depending on the size of target nodes, routing techniques are classified into unicast, multicast and broadcast protocols. In this article, we give analysis and performance evaluation of tree‐based multicast routing in wireless sensor networks with varying network metrics. Geographic multicast routing (GMR) and its variations are used extensively in sensor networks. Multicast routing protocols considered in the analytical model are GMR, distributed GMR, demand scalable GMR, hierarchical GMR, destination clustering GMR and sink‐initiated GMR. Simulations are given with comparative analysis based on varying network metrics such as multicast group size, number of sink nodes, average multicast latency, number of clusters, packet delivery ratio, energy cost ratio and link failure rate. Analytical results indicate that wireless sensor network multicast routing protocols operate on the node structure (such as hierarchical, clustered, distributed, dense and sparse networks) and application specific parameters. Simulations indicate that hierarchical GMR is used for generic multicast applications and that destination clustering GMR and demand scalable GMR are used for distributed multicast applications. Copyright © 2012 John Wiley & Sons, Ltd.     

A new algorithm for cluster head selection in LEACH protocol for wireless sensor networks

In wireless sensor network, a large number of sensor nodes are distributed to cover a certain area. Sensor node is little in size with restricted processing power, memory, and limited battery life. Because of restricted battery power, wireless sensor network needs to broaden the system lifetime by reducing the energy consumption. A clustering‐based protocols adapt the use of energy by giving a balance to all nodes to become a cluster head. In this paper, we concentrate on a recent hierarchical routing protocols, which are depending on LEACH protocol to enhance its performance and increase the lifetime of wireless sensor network. So our enhanced protocol called Node Ranked–LEACH is proposed. Our proposed protocol improves the total network lifetime based on node rank algorithm. Node rank algorithm depends on both path cost and number of links between nodes to select the cluster head of each cluster. This enhancement reflects the real weight of specific node to success and can be represented as a cluster head. The proposed algorithm overcomes the random process selection, which leads to unexpected fail for some cluster heads in other LEACH versions, and it gives a good performance in the network lifetime and energy consumption comparing with previous version of LEACH protocols.     

Battery-Aware Routing for Streaming Data Transmissions in Wireless Sensor Networks

Recent technological advances have made it possible to support long lifetime and large volume streaming data transmissions in sensor networks. A major challenge is to maximize the lifetime of battery-powered sensors to support such transmissions. Battery, as the power provider of the sensors, therefore emerges as the key factor for achieving high performance in such applications. Recent study in battery technology reveals that the behavior of battery discharging is more complex than we used to think. Battery powered sensors might waste a huge amount of energy if we do not carefully schedule and budget their discharging. In this paper we study the effect of battery behavior on routing for streaming data transmissions in wireless sensor networks. We first give an on-line computable energy model to mathematically model battery discharge behavior. We show that the model can capture and describe battery behavior accurately at low computational complexity and thus is suitable for on-line battery capacity computation. Based on this battery model we then present a battery-aware routing (BAR) protocol to schedule the routing in wireless sensor networks. The routing protocol is sensitive to the battery status of routing nodes and avoids energy loss. We use the battery data from actual sensors to evaluate the performance of our protocol. The results show that the battery-aware protocol proposed in this paper performs well and can save a significant amount of energy compared to existing routing protocols for streaming data transmissions. Network lifetime is also prolonged with maximum data throughput. As far as we know, this is the first work considering battery-awareness with an accurate analytical on-line computable battery model in sensor network routing. We believe the battery model can be used to explore other energy efficient schemes for wireless networks as well.     

An Energy-Efficient Routing Algorithm Based on Relative Identification and Direction for Wireless Sensor Networks

In studies of wireless sensor networks (WSNs), routing protocols in network layer is an important topic. To date, many routing algorithms of WSNs have been developed such as relative direction-based sensor routing (RDSR). The WSNs in such algorithm are divided into many sectors for routing. RDSR could simply reduce the number of routes as compared to the convention routing algorithm, but it has routing loop problem. In this paper, a less complex, more efficient routing algorithm named as relative identification and direction-based sensor routing (RIDSR) algorithm is proposed. RIDSR makes sensor nodes establish more reliable and energy-efficient routing path for data transmission. This algorithm not only solves the routing loop problem within the RDSR algorithm but also facilitates the direct selection of a shorter distance for routing by the sensor node. Furthermore, it saves energy and extends the lifetime of the sensor nodes. We also propose a new energy-efficient algorithm named as enhanced relative identification and direction-based sensor routing (ERIDSR) algorithm. ERISDR combines triangle routing algorithm with RIDSR. Triangle routing algorithm exploits a simple triangle rule to determine a sensor node that can save more energy while relaying data between the transmitter and the receiver. This algorithm could effectively economize the use of energy in near-sensor nodes to further extend the lifetime of the sensor nodes. Simulation results show that ERIDSR get better performance than RDSR, and RIDSR algorithms. In addition, ERIDSR algorithm could save the total energy in near-sensor nodes more effectively.     

BeamStar: An Edge-Based Approach to Routing in Wireless Sensor Networks

Current expectations on sensor node in terms of size, cost, and energy efficiency have led to a severely limited design space on hardware and software. In this paper, we explore capabilities at the network edge for sensor networks, aiming to reduce the hardware and software complexity of a sensor node without sacrificing network performance. We present a novel edge-based routing protocol, nicknamed BeamStar, for wireless sensor networks. Under BeamStar, the base station exploits some nice properties associated with directional antenna and power control at the base station. We devise a simple protocol so that each sensor node can determine its location information passively with minimum control overhead. We also show how to design a robust routing protocol based on the location information at each sensor node. Under the proposed protocol, sensor nodes are relieved of the activities (or burdens) that are associated with control and routing, thus enabling much simpler hardware and software implementation at sensor nodes. Simulation results demonstrate that BeamStar achieves high reliability at comparable energy consumptions as compared with prior work. It is a viable approach to pursue size and cost reduction for future sensor node design.     

基于无线传感器网络LEACH协议的仿真分析研究

无线传感器网络（WSN）路由协议中的LEACH协议作为最早提出的层次型协议,得到了广泛的应用与关注。为了达到对比分析低功耗自适应集簇分层型LEACH协议、平面型MTE协议和改进后的LEACH-C协议的目的,利用NS 2网络仿真平台做了仿真实验,分析研究了仿真数据。结果表明以LEACH协议为基础改进后的LEACH-C协议在给定能量条件下,经过一段时间的运行,剩余节点数最多、能耗最小、数据收发量最大,能有效延长网络使用寿命,具备广泛的实际应用价值。     

链路可靠的无线传感器网络组播路由协议

在无线传感器网络实际应用中,组播正在发挥着越来越重要的作用.但由于能量等多方面的因素,使得为无线传感器网络设计一个有效的组播路由是非常困难的.针对无线传感器网络中节点的能量限制,通过寻求节点间最短路径,提出一种能量有效的链路可靠组播路由协议(RLMR).该协议充分考虑到网络中节点的能耗因素和两节点间的链路可靠性等,通过对这两个因素的综合考虑,让能量较多并且以发送节点更靠近的节点承担更多传输任务的方式,为数据流优化路由选择,均衡无线传感器网络节点的能量消耗,以延长网络的生存时间.仿真结果证明了RLMR的有效性和可靠性.     

The Energy-Aware Operational Time of Wireless Ad-Hoc Sensor Networks

Sensor networks are deployed in numerous military and civil applications, such as remote target detection, weather monitoring, weather forecast, natural resource exploration and disaster management. Despite having many potential applications, wireless sensor networks still face a number of challenges due to their particular characteristics that other wireless networks, like cellular networks or mobile ad hoc networks do not have. The most difficult challenge of the design of wireless sensor networks is the limited energy resource of the battery of the sensors. This limited resource restricts the operational time that wireless sensor networks can function in their applications. Routing protocols play a major part in the energy efficiency of wireless sensor networks because data communication dissipates most of the energy resource of the networks. This paper studies the importance of considering neighboring nodes in the energy efficiency routing problem. After showing that the routing problem that considers the remaining energy of all sensor nodes is NP-complete, heuristics are proposed for the problem. Simulation results show that the routing algorithm that considers the remaining energy of all sensor nodes improves the system lifetime significantly compared to that of minimum transmission energy algorithms. Also, the energy dissipation of neighboring nodes accounts for a considerable amount of the total energy dissipation. Therefore, a method that reduces the energy dissipation by notifying the neighboring nodes to turn off their radio when not necessary is proposed. By reducing the unnecessary energy dissipation of the neighbors, the lifetime is increased significantly.