垂直腔面发射激光器的小信号电路模型和调制特性

给出了垂直腔面发射激光器的小信号电路模型和调制特性,调制特性用解析计算和电路模型模拟两种方法得到,解析计算和电路模型模拟的结果一致,实验证实了电路模型的正确性.     

垂直腔面发射激光器的小信号电路模型和调制特性

给出了垂直腔面发射激光器的小信号电路模型和调制特性,调制特性用解析计算和电路模型模拟两种方法得到,解析计算和电路模型模拟的结果一致,实验证实了电路模型的正确性.     

单模半导体激光器的非线性失真特性的电路模拟

本文提出了一种基于小信号等效电路的半导体激光器非线性电路模型，该模型使激光顺的调制响应和非线性特性以及其它相关电子电路的非线性特性可统一地通过通用电路分析软件来分析和计算。运用此模型对一单模激光器的二阶谐波与三阶交调失真特性进行了分析，结果与已报道的理论和实验结果一致。     

4H-SiC功率MESFET直流I-V特性解析模型

提出了一种改进的4H-SiC MESFET大信号直流解析模型。该模型基于栅极下面电荷的二维分布进行分析,在考虑电场相关迁移率、速度饱和及沟道内电荷堆积的基础上,计入沟道长度调制效应,建立基于物理的沟道长度调制效应模型。计算结果表明,计入沟道长度调制效应后的直流模型在饱和区与实测的I-V特性较为吻合。     

注入锁定半导体激光器的电路模型及其调制特性分析

本文给出了注入锁定半导体激光器ＬＤ小信号电路模型，使得对注锁ＬＤ的调制特性可以用通用电路分析软件进行分析，运用此模型对注入锁定ＬＤ的调制特性进行了分析。模型的稳态分析结果与已报导的理论和实验一致。     

一种非理想直流变换器的建模与仿真

应用平均法导出了考虑各种非理想因素时Buck-boost变换器的直流稳态和小信号动态模型，给出了仿真算例。所得模型具有实用性，依据该模型，代入电路参数后经简单计算或编程，即可快速获得电路稳态和动态特性的解析解。     

基于解析电导率模型的相变存储器SPICE模型

在相变存储器的外围电路设计中,相变存储单元的电路模型是连接器件与电路的桥梁。在本文中,提出了一种基于解析电导率模型的相变存储器电路模型,与前面的工作相比,该模型利用解析电导率模型代替了使用传统模型中需要利用测试结果建模的缺点,可以通过材料的参数计算相变存储单元的电阻,能够反映相变材料中的载流子传输特性。同时,基于等温假设,提出了解析温度模型,并基于JMA方程建立的相变动力学模型,结果表明,该模型能够进行相变存储单元瞬态与稳态电路仿真,并与测试结果符合较好。     

PSM开关变换器的大信号模型与瞬态特性

针对传统PWM调制具有轻载下效率低的缺点,论文作者提出一种新的高效调制模式——脉冲跨周调制PSM模式.本文对这种新的PSM开关变换器调制模式进行了包括大信号解析模型、离散模型和相平面模型的大信号建模工作,并借助变换器的解析解、离散模型和相平面分析法对PSM变换器开环/闭环系统的瞬态响应特性进行了分析.研究表明PSM变换器不仅较PWM调制模式轻载下效率高,而且具有响应速度更快,抗干扰性更好的特点.     

半导体激光器调制特性的人工神经网络仿真

对半导体激光器调制特性进行了理论分析，通过研究半导体激光器调制特性的速率方程，推导了调制特性的解析表达式。用广义回归神经网络建立了激光器调制特性的神经网络模型，通过训练好的神经网络模型对激光器调制特性进行了深入分析，并对激光器结构进行了仿真设计。模型输出结果与理论分析的结果相吻合，且该方法具有速度快、精度高、重复性好等优点。研究结果表明，利用神经网络模型可以对半导体激光器性能进行分析，并确定半导体激光器的一些结构尺寸。     

DFB激光器调制特性ANN建模与设计

通过研究分布反馈式(DFB)激光器调制特性的速率方程，推导了调制特性的解析表达式，建立了调制特性神经网络(ANN)模型，计算机仿真与理论分析的结果相吻合。用此模型对激光器结构进行了仿真设计，得到的结果对激光器的生产设计具有重要的指导意义。     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.     

GaAsSb/InAlAs PA DHBTs Grown by Production MBE

The epi material growth of GaAsSb based DHBTs with InAlAs emitters are investigated using a 4 × 100mm multi-wafer production Riber 49 MBE reactor fully equipped with real-time in-situ sensors including an absorption band edge spectroscope and an optical-based flux monitor. The state-of-the-art hole mobilities are obtained from 100nm thick carbon-doped GaAsSb. A Sb composition variation of less than ± 0.1 atomic percent across a 4 × 100mm platen configuration has been achieved. The large area InAlAs/GaAsSb/InP DHBT device demonstrates excellent DC characteristics,such as BVCEO＞6V and a DC current gain of 45 at 1kA/cm2 for an emitter size of 50μm × 50μm. The devices have a 40nm thick GaAsSb base with p-doping of 4. 5 × 1019cm-3 . Devices with an emitter size of 4μm × 30μm have a current gain variation less than 2% across the fully processed 100mm wafer. ft and fmax are over 50GHz,with a power efficiency of 50% ,which are comparable to standard power GaAs HBT results. These results demonstrate the potential application of GaAsSb/InP DHBT for power amplifiers and the feasibility of multi-wafer MBE for mass production of GaAsSb-based HBTs.     

Influence of polarization extinction ratio on distributed polarization coupling detection

Distributed polarization coupling in polarization-maintaining fibers can be detected by using a white light Michelson interferometer. This technique usually requires that only one polarization mode is excited. However, in practical measurement, the injection polarization direction could not be exactly aligned to one of the principal axes of the PMF, so the influence of the polarization extinction ratio should be considered. Based on the polarization coupling theory, the influence of the incident polarization extinction on the measurement result is evaluated and analyzed, and a method for distributed polarization coupling detection is developed when both two orthogonal eigenmodes are excited.     

Noise character analysis and the restraint of self-pulsation laser diodes

We calculate the Langevin noise sources of self-pulsation laser diodes, analyze the effects of active region noise and saturable-absorption region noise on the power fluctuation as well as period fluctuation, and propose a novel method to restrain the noise effects. A visible SIMULINK model is established to simulate the system, The results indicate that the effects of noise in absorption region can be ignored; that with the increase of DC injecting current, the noise effects enhance power jitter, and nevertheless, the period jitter is decreased; and that with external sinusoidal current modulating the self-pulsation laser diode, the noise-induced power jitter and period jitter can be suppressed greatly. This work is valuable for clock recovery in all-optical network.     

High-quality single-crystal CdSe nanoribbons and their optical properties

Large-scale synthesis of single-crystal CdSe nanoribbons is achieved by a modified thermal evaporation method, in which two-step-thermal-evaporation is used to control CdSe sources＇ evaporation. The synthesized CdSe nanoribbons are usually several micrometers in width, 50 nm in thickness, and tens to several hundred micrometers in length. Studies have shown that high-quality CdSe nanoribbons with regular shapes can be obtained by this method. Room-temperature photolumines-cence indicates that the lasing emission at 710 nm has been observed under optical pumping （266 nm） at power densities of 25-153 kW/cm^2. The full width half maximum （FWHM） of the lasing mode is 0.67 nm     

Propagation of hermite-cosh-gaussian beams passing through ABCD optical system with an annular aperture

By using the expansion of the aperture function into a finte sum of complex Gaussian functions, the corresponding analytical expressions of Hermite-cosh-Gaussian beams passing through annular apertured paraxially and symmetrically optical systems written in terms of ABCD matrix were derived, and they could reduce to the cases with squared aperture. In a similar way, the corresponding analytical expressions of cosh-Gaussian beams through annular apertured ABCD matrix were also given. The method could save more calculation time than that by using the diffraction integral formula directly.     

中国建立EB级存储实验室,致力云计算应用(英文)

正With the support of 863 programs,Sugon Information Industry Co.,Ltd.,set up a dawning EB-class storage laboratory to address massive data storage requirements and largescale cloud computing demonstration applications.The Dawning EB-class cloud storage system adopts advanced fault-tolerant architecture,efficient data fault-tolerant algorithms with user authentication and data encryption policies to deal with the"lost""wrong"and"stolen"problems of data for ensuring the reliability and safety of the EB-class storage system in the public network application environments.The Dawning EB-class Storage Laboratory taking advan-