Equivalent transformations for the mixed lumped Brune-type sectionand uniform transmission line

As an analytical method for nonuniform transmission lines (NTLs) equivalent transformations are extended to a more general case, namely a mixed lumped Brune-type section and a uniform transmission line (unit element, UE). Circuits consisting of a cascade connection of a lumped Brune section and a UE are equivalent to one consisting of a cascade connection of a nonuniform transmission line whose characteristic impedance distribution is expressed with a trigonometric function and a lumped Brune section. This equivalent transformation method is easily applied to a circuit consisting of a lumped C section and a UE. The equivalent circuit is a circuit consisting of an NTL and a lumped C section. In this case, the characteristic impedance distribution of the NTL may be expressed in terms of a hyperbolic function. Exact network functions of the NTLs are easily obtained from the equivalent circuits without solving the telegrapher's equation. By considering the limiting case of these equivalent transformations, equivalent transformations for circuits consisting of a cascade connection of a lumped resonance circuit and a circuit and a uniform transmission line are derived     

Simultaneous compression and amplification of ultrashort pulses atMHz repetition rates

The authors report simultaneous compression and chirped pulse amplification at megahertz repetition rates of ultrashort pulses using a cavity-dumped dye laser with a pumping argon ion laser as the amplifier. In a single stage, the pulse is compressed by a factor of 25 and the energy per pulse is simultaneously increased by a factor of 2, without reducing the repetition rate. Starting with a pulse that has a duration of 4.3 ps and a peak power of 5.8 kW, a pulse with a duration of 170 fs and a peak power of 294 kW is obtained. A second stage of pulse compression is used to obtain a broadband pulse with a duration >~50 fs and a peak power of ~100 kW at 2 MHz     

Some Theoretic Results on a Digital EMG Signal Processor

As is well known, a general EMG signal processing scheme includes a prewhitening filter, a v-order detector, a smoothing filter, and a relinearizer. In this paper, a theoretical analysis of such a scheme is carried out, including a detector characteristic which presents a logarithmic behavior.     

Unifying probabilistic and variational estimation

A maximum a posteriori (MAP) estimator using a Markov or a maximum entropy random field model for a prior distribution may be viewed as a minimizer of a variational problem.Using notions from robust statistics, a variational filter referred to as a Huber gradient descent flow is proposed. It is a result of optimizing a Huber functional subject to some noise constraints and takes a hybrid form of a total variation diffusion for large gradient magnitudes and of a linear diffusion for small gradient magnitudes. Using the gained insight, and as a further extension, we propose an information-theoretic gradient descent flow which is a result of minimizing a functional that is a hybrid between a negentropy variational integral and a total variation. Illustrating examples demonstrate a much improved performance of the approach in the presence of Gaussian and heavy tailed noise. In this article, we present a variational approach to MAP estimation with a more qualitative and tutorial emphasis. The key idea behind this approach is to use geometric insight in helping construct regularizing functionals and avoiding a subjective choice of a prior in MAP estimation. Using tools from robust statistics and information theory, we show that we can extend this strategy and develop two gradient descent flows for image denoising with a demonstrated performance.     

Filter-embedded design and its applications to passive components

A design in which a filter is embedded in a fiber fixed on a substrate is proposed. It was successfully applied to the fabrication of low loss fiber optic components for a single-mode fiber transmission system. These components have a wide operational temperature range. The design is easily adapted to a multifilter or multifiber component. Filter embedding is achieved in two ways. One is to insert a thin filter chip in a slit which is machined into a fiber fixed on a substrate by a dicing saw (filter inserted type). The other is to evaporate a filter film directly on a fiber end face and butt this fiber to another fiber on a guide groove on a substrate (filter evaporated type)     

An X‐Band Carbon‐Doped InGaP/GaAs Heterojunction Bipolar Transistor MMIC Oscillator

This paper addresses a fully‐integrated low phase noise X‐band oscillator fabricated using a carbon‐doped InGaP heterojunction bipolar transistor (HBT) GaAs process with a cutoff frequency of 53.2 GHz and maximum oscillation frequency of 70 GHz. The oscillator circuit consists of a negative resistance generating circuit with a base inductor, a resonating emitter circuit with a microstrip line, and a buffering resistive collector circuit with a tuning diode. The oscillator exhibits 4.33 dBm output power and achieves ?127.8 dBc/Hz phase noise at 100 kHz away from a 10.39 GHz oscillating frequency, which benchmarks the lowest reported phase noise achieved for a monolithic X‐band oscillator. The oscillator draws a 36 mA current from a 6.19 V supply with 47.1 MHz of frequency tuning range using a 4 V change. It occupies a 0.8 mm × 0.8 mm die area.     

Detection of circular arcs for content-based retrieval from animage database

Methods are discussed for producing a summary of geometric content for images from a specific geological application, which can be used for content-based retrieval of interesting images from a large database. Using a data set of 100 images, it is shown that a local are detection scheme provides a more concise and hence a better summary of image content than a conventional edge map, while giving a superior performance     

High-speed sensory-motor fusion based on dynamics matching

This paper discusses a design concept of a sensory-motor fusion system to achieve high performance in a dynamic changing environment. From the viewpoint of a dynamic system, the new concept called "dynamics matching" is proposed to match the dynamics constraints of a system. Based on this concept, we describe a high-speed vision chip that has a general purpose parallel processing array along with a photodetector all in a single silicon chip. Next we describe a new sensory-motor fusion system which consists of a hierarchical parallel processing system, a vision chip system, and a multifingered hand-arm. All sensory feedback, including visual feedback, can be achieved in 1 ms. In addition, as an application of the system, we demonstrate high-speed grasping using visual and force feedback.     

Stereo‐Vision‐Based Human‐Computer Interaction with Tactile Stimulation

If a virtual object in a virtual environment represented by a stereo vision system could be touched by a user with some tactile feeling on his/her fingertip, the sense of reality would be heightened. To create a visual impression as if the user were directly pointing to a desired point on a virtual object with his/her own finger, we need to align virtual space coordinates and physical space coordinates. Also, if there is no tactile feeling when the user touches a virtual object, the virtual object would seem to be a ghost. Therefore, a haptic interface device is required to give some tactile sensation to the user. We have constructed such a human‐computer interaction system in the form of a simple virtual reality game using a stereo vision system, a vibro‐tactile device module, and two position/orientation sensors.     

Compact and low-loss interleave filter employing lattice-form structure and silica-based waveguide

This paper describes a compact and practical interleave filter with uniform multi/demultiplexing properties and a wide operational wavelength range realized by using a lattice-form structure and a silica-based waveguide. In the design, we optimized the bandwidth by controlling the lattice stage number and the loss ripple in the spectrum. Moreover, we propose a novel coupler with a large fabrication tolerance, a new tandem configuration that provides uniform characteristics and low dispersion, a polarization dependence compensation method, and a folded configuration, which are effective in realizing a high-performance interleave filter. Based on the above techniques, we fabricated a 50-GHz channel spacing interleave filter by using planar-lightwave-circuit technologies and demonstrated that it performed well throughout the C-band, exhibiting a low insertion loss of about 2 dB, a low chromatic dispersion of within +/-20 ps/nm, a 1-dB passband width of over 34 GHz, and a 30-dB stopband width of over 25 GHz, which are sufficient for a 10-Gbps transmission system.     

A bi-directional transceiver PIC for ping-pong local loop configurations operating at 1.3-/spl mu/m wavelength

We propose and demonstrate a simple, potentially low-cost, photonic integrated circuit that can operate as a transceiver in a ping-pong optical data-link configuration. The device is designed for uncooled operation, with a gain section, a detector, and a beam expander inside a Fabry-Perot cavity. The detector has a 1.4 /spl mu/m quaternary layer with a broad spectral responsivity range extending to 33 nm higher than the lasing wavelength of the device. The transmitter can provide 8 dBm inside a single-mode fiber, and the beam expander relaxes the alignment tolerance to a single-mode fiber.     

Plane wave propagation in a uniaxial bianisotropic medium with an application to a polarization transformer

Uniaxial bianisotropic medium is a generalization of the well-studied bi-isotropic and chiral media. It is obtained, for example, when microscopic helices with parallel axes are positioned in a host dielectric in random locations. Plane wave propagation in such a medium is studied and a simple solution for the dispersion equation and for the eigenwaves are found. As a numerical example, polarization properties of a transverse wave propagating in a uniaxial bianisotropic medium is considered. The results give a simple possibility to construct a polarization transformer with a transversely uniaxial chiral medium for changing the polarization of a propagating plane wave.     

Yield challenges in wafer stacking technology

Wafer stacking technology offers a higher performance in a smaller size with a lower cost option for microelectronic industries. However, it suffers from a compound yield loss which becomes a key challenge and a limiting factor in this technology. A compound yield loss in wafer stacking has been analyzed and yield challenges have been presented. Assuming a random defect density per wafer and no yield fallout from stacking processes, the compound yield of a bonded wafer pair has been estimated with the most commonly used yield model. As a result, it is proposed that a die area reduction for wafer stacking is needed in order to offer a great yield advantage. Both wafer testing and wafer size are also proven to influence significantly a die yield in a bonded wafer pair.     

环Zn上椭圆曲线的密钥交换协议

设n=pq,p,q为奇素数,环Z_n上的椭圆曲线E_n(a,b)的SOM密钥交换协议与QV密钥交换协议均选取E_n(a,b)上的阶为M_n=lcm{#E_p(a,b),＃E_q(a,b)}的点G作为公钥(称G为基点),并且限定其对应的E_p(a,b)和E_q(a,b)均为循环群,这就限制了这两个协议只能选择一类特殊的椭圆曲线E_n(a,b)构作密钥交换协议.本文指出,E_p(a,b)和Eq(a,b)均为循环群这一限定是不必要的.本文给出了E_n(a,b)上存在阶为M_n的点G的一个充分必要条件,并给出一个例子,其中E_p(a,b)为循环群,E_q(a,b)为非循环群,且对应的E_n(a,b)上有阶为M_n的点G.同时,本文选取E_n(a,b)上阶为lcm{n₁,m₁}的点作为基点,这里n₁,m₁分别为E_p(a,b)和E_q(a,b)的最大循环子群的阶.这样,就能够选择更多的椭圆曲线E_n(a,b),用来构作密钥交换协议(包括将两方之间的密钥交换协议扩展到三方).     

Integrated-optic ring resonators with two stacked layers of silicawaveguide on Si

A ring resonator with a radius of 1.5 mm is demonstrated using a stack structure consisting of two layers of GeO₂-doped silica waveguide with different refractive index differences (Δ). One is a high-Δ waveguide layer with a Δ of 2% for a small-radius ring and the other is a waveguide layer with a Δ of 0.75% for good fiber coupling. The waveguides and a flattened middle-cladding layer are stacked on a Si substrate. The ring resonator exhibited a wide free spectral range (FSR) of 21.6±0.1 GHz and a high finesse of 110±10     

New Address-While-Display Driving Method for High Contrast Ratio and Wide Operation Margin PDP Using Short Ramp Reset (SRR) and Short Pulse Erase (SPE) Schemes

We propose a new address-while-display (AWD) driving method for a plasma display panel to obtain a high contrast ratio and a wide operation margin, which is composed of a short ramp reset (SRR) period, a short erase period, a sustain period, and an address period as the basic units. The SRR pulse and the short pulse erase period make it possible to obtain a wide operating voltage margin and minimize the background luminance by redistributing the wall charges in a short initialization time between the address and the scan electrode. As a result, a high darkroom contrast ratio of 10 000 : 1 could be achieved with a wide operating voltage margin of 40 V for a stable address.      

The Matrix Formulation of Scattering Problems

Two regions in space are coupled through an opening in a perfectly conducting surface. By using a complete set of eigenvectors in the opening, each region can be represented by an equivalent Norton circuit involving a short-circuit current (a vector) and a generator admittance (a matrix). The particular case of a cavity at resonance is investigated. Application to a cavity terminated in a waveguide is considered, and the transformation of the equivalent circuit resulting from the shift of the terminal plane is analyzed. After solving the example of a slotted waveguide, a possible set of eigenvectors for an arbitrary opening is proposed.     

A 30-GHz monolithic receiver

Several monolithic integrated circuits have been developed to make a 30-GHz receiver. The receiver components include a low-noise amplifier, an IF amplifier, a mixer, and a phase shifter. The LNA has a 7-dB noise figure with over 17 dB of associated gain. The IF amplifier has a 13-dB gain with a 30-dB control range. The mixer has a conversion loss of 10.5 dB. The phase shifter has a 180° phase shift control and a minimum insertion loss of 1.6 dB.     

Digital image watermarking employing codebook in vector quantisation

Two simple watermarking techniques for a digital image are proposed. The methods employ a codebook in vector quantisation, and can extract watermark information from a watermarked image without an original image. Simulation results show that when the codebook of a larger size is used, a reconstructed image with a watermark has better quality than that without a watermark, and, for one of the proposed methods, a watermark size and the percentage of 0 bit contained in a watermark have almost no effect on PSNR for a reconstructed image.     

A W-Band Air-Cavity Filter Integrated on a Thin-Film Substrate

In this letter, a W-band air-cavity filter has been developed on a thin-film substrate using a lossy silicon substrate as a base plate, which is suitable for a mm-wave system-on-package. The lossy silicon suppresses a parasitic substrate mode excited in a thin-film substrate, while a coupling loss between a transmission line and a resonator is minimized by etching the backside of the lossy silicon substrate underneath the coupling area. In the backside etching process, 70 mum of silicon was left for mechanical support of the thin-film substrate. The resonator was fabricated using a low-cost silicon micromachining technique and was flip-chip integrated on a thin-film substrate. The fabricated air-cavity resonator showed an unloaded Q of 851 at a resonant frequency of 94.18 GHz. Improvement in the coupling loss by the backside etching process was verified with measurement results. The fabricated filter exhibited an insertion loss of 1.75 dB and a return loss better than 14.5 dB with a 1.3% 3 dB fractional bandwidth at a center frequency of 93.8 GHz.