LTE系统中引入D2D技术后的干扰研究

D2D(终端到终端)是一种在LTE(长期演进)通信系统中通过重用小区内蜂窝用户的资源来实现终端到终端通信的新型技术。在LTE中引入D2D后,资源调度也随之发生变化,不仅体现在资源块的使用上,也体现在相应的功率控制机制上。D2D技术在提高系统容量的同时,也带来了新的干扰问题——普通蜂窝通信模式与D2D模式的相互干扰。通过协调好系统内蜂窝通信与D2D通信之间的干扰,可以提高系统的总体性能。     

在LTE-Advanced网络下的Device-to-Device通信

Device-to-Device（D2D）通信是一种在系统的控制下,允许终端之间通过复用小区资源直接进行通信的新型技术,它能够增加蜂窝通信系统频谱效率,降低终端发射功率,在一定程度上解决无线通信系统频谱资源匮乏的问题。与其他应用于非许可频段的同类技术相比,D2D具有干扰可控等优点。文章对D2D技术原理进行了介绍,阐述了它应用的必要性和应用场景、它对比同类技术的优点,以及在应用中的关键问题。     

D2D通信资源调度研究现状综述

终端直通技术(D2D)是一种终端在基站控制下直接进行通信而不需要基站转发的新型通信技术。D2D引入LTE-A蜂窝系统虽然可以带来吞吐量和频谱效率的提升,但是也会带来很大的干扰。综合近些年来的研究成果,合理的资源调度算法成为降低干扰,提升系统性能的关键。首先,描述了D2D通信技术引入LTE-A蜂窝网络后的系统干扰模型。然后,从模式选择、资源分配和功率控制三个方面综述了目前国内外文献关于资源调度算法的研究成果。     

D2D技术在LTE-A系统中的应用

Device-to-Device（D2D）是一种在LTE-A系统中通过重用小区内宏蜂窝用户的资源来实现端到端通信的新型技术。本文从实际应用的角度出发,首先对D2D技术的原理和应用进行了分析,然后讨论D2D技术应用于LTE-A系统中的优缺点,接着通过仿真验证了D2D技术在LTE-A系统中的优势。最后阐述了D2D技术在LTE-A系统中应用可研究的方向及技术展望。     

提高蜂窝网络中数据分发效率的D2D协作转发算法

Device-to-Device(D2D)通信是一种移动终端在蜂窝通信系统的控制下使用授权频段进行点到点通信的新型技术。通过允许接收终端间的数据转发,D2D通信可以用来提高蜂窝网络中的数据分发效率。现有的终端间转发算法,没有充分考虑D2D链路的差异,很难实现频谱资源的高效利用。为此,该文提出了一种基于多跳中继的D2D协作转发算法,包括多播和单播两个模式。该算法根据D2D链路质量自适应地选择最优的中继、路由及传输跳数,能够充分利用D2D链路的多信道分集增益。仿真结果表明,该文所提出的算法能够显著地提高D2D转发的资源利用率,进而提升数据分发业务的吞吐量。     

一种复用蜂窝网络下行无线资源的D2D通信干扰抑制方法

由于蜂窝通信与D2D通信复用相同的小区下行资源,这两种通信方式之间的小区内干扰不能再被忽略。基站的发射功率要比UE的发射功率高出很多,同时实际的下行系统中,基站也不便对每个用户进行功率控制,因此功率控制干扰抑制方案在下行时的效果并不明显。本文从用户调度的角度出发．提出了一种适用于D2D通信复用蜂窝网络下行资源的干扰抑制方法。该方法充分利用的UE的空间隔离度,减少了两种通信模式之间的干扰,提升了整个蜂窝小区的吞吐量。     

如何采用D2D技术实现拓展网络连接和接入方式

D2D技术是一种不需要在基站的帮助就可以进行的通信终端之间的直接通信,实现拓展网络连接和接入方式.因为通信距离短,信道质量很好,D2D可以实现较高的数据速率、较低的时延和较低的功耗;进行终端广泛分布,可以改善覆盖,实现频谱资源的高效利用,能够实现更灵活的网络架构和连接方法,增加链路灵活性和网络可靠性.当下,D2D采用广播、组播以及单播技术手段,未来会发展其增强技术,包括基于D2D的中继技术、多天线技术以及联合编码技术等.     

D2D通信中一种基于FFR的动态功率控制方案

工作在underlay方式下的D2D(device-to-device)通信利用资源复用共享蜂窝网络中的资源,在提高频谱资源利用率、降低移动终端功耗的同时,会给已有蜂窝网络带来干扰。在保证D2D用户和蜂窝用户的服务质量的前提下,研究了蜂窝用户和D2D用户的功率控制和资源分配问题。首先引入部分频率复用(FFR)实现蜂窝用户和D2D用户之间的资源划分和复用;然后以系统吞吐量最大化为原则,建立优化目标。结合部分功率控制(FPC)的基本思想,进而提出了一种动态功率控制(DPC)策略。仿真结果表明,所提出的方案能够有效地提高多小区系统的性能。     

D2D通信中干扰协调算法的研究

D2D(Device-to-Device,终端直通通信)技术是指用户可以直接进行通信而不用经过基站的一种终端直通通信技术,移动蜂窝使用终端直通通信技术能够增加蜂窝系统性能,然而却带来了较多的干扰以及加大了能量损耗.为了达到用户和基站间的相互干扰,增加频谱利用效率和能量利用效率,文章以D2D 用户和速率为优化目标提出了一种联合资源分配和功率控制的方法,用以达到高能效的终端直通通信.仿真结果表明:文章提出的联合信道分配和功率控制方案,能明显减少D2D用户与蜂窝系统受到的干扰,增加蜂窝频谱利用率以及D2D用户和速率.     

协助D2D通信的波束赋形算法设计

文章考虑下行链路D2D通信对复用同小区的蜂窝资源,不同于传统的基于总功率约束的赋形策略,我们提出了基于单根天线功率约束的波束赋形策略。TD-LTE系统采用的是时分双工,上下行信道具有互易性,因此通过对上行信道信息的获取,可以得到下行信道的信道状态信息(Channel Station Information,CSI),从而有效地实现波束赋形。在CSI已知的情况下,我们提出了一种高效的算法寻找最优的波束赋形策略,使得经典的基于最大最小信干比的问题能够被重写为标准的二阶锥规划(SCOP),从而使最优的目标能够通过标准的二阶锥规划求解器求解。同时,为了减少由于D2D通信对加入给蜂窝网络带来的干扰,一种D2D状态搜索算法被提出,它能够选择最优的D2D通信对加入蜂窝网络中,使得系统的吞吐量得到提升。     

异构网络中基于能效优化的D2D资源分配机制

针对异构网络中D2D通信复用蜂窝用户频谱时存在的频谱分配问题,该文提出一种基于改进离散鸽群优化(PIO)算法的D2D通信资源分配机制。通过设置信干噪比(SINR)门限值来保证用户的通信服务质量(QoS),采用功率控制算法为用户设置发射功率,使用基于运动权值的二进制离散鸽群优化(MWBPIO)算法为D2D用户进行资源分配,并将D2D通信技术与中继技术进行有效结合,为边缘用户建立D2D中继链路,保证边缘用户的通信质量,最大化系统性能目标。仿真结果表明,该方案有效抑制了异构通信系统中引入D2D用户后导致的干扰问题,提高了边缘用户的通信质量和系统的频谱利用率以及系统的能效。     

Radio resource management scheme and outage analysis for network-assisted multi-hop D2D communications

In a cellular network it's very difficult to make spectrum resource more efficiently. Device-to-Device (D2D) technology enables new service opportunities, and provides high throughput and reliable communication while reducing the base station load. For better total performance, short-range D2D links and cellular links share the same radio resource and the management of interference becomes a crucial task. Here we argue that single-hop D2D technology can be used to further improve cellular networks performance if the key D2D radio resource management algorithms are suitably extended to support multi-hop D2D communications. Aiming to establish a new paradigm for the analysis and design of multi-hop D2D communications, We propose a radio resource allocation for multi-hop D2D routes based on interference avoidance approach in LTE-A networks. On top of that, we investigate the outage probability of D2D communication. We first introduce a new definition of outage probability by considering the maximum distance to be allowable for single-hop transmission. Then we study and analyze the outage performance of a multi-hop D2D route. We derive the general closed form expression of outage probability of the multi-hop D2D routes. The results demonstrate that the D2D radio, sharing the same resources as the cellular network, provide higher capacity compared to pure cellular communication where all the data is transmitted through the base station. They also demonstrate that the new method of calculation of D2D multi hop outage probability has better performance than classical method defined in the literature.     

混合D2D蜂窝网络中基于模拟退火算法的资源调度策略

D2D通信是未来5G网络中一种近距离直通通信方式,在通信过程中,信息直接由发送端传给接收用户,而不需要经过基站的转发.在传统蜂窝网络中引入D2D通信可以极大地提升系统的总吞吐量、增大频谱资源的利用率以及降低发射终端的功耗.主要介绍了一种适用于混合D2D蜂窝网络中的资源分配方法,通过拉格朗日乘子法结合模拟退火算法实现频谱资源的分配,提出一种同时考虑信道容量和能耗的基于模拟退火算法的资源调度策略.本算法在维也纳仿真平台上经仿真验证,相比于传统贪婪优化算法,可以明显增大系统总吞吐量和频谱资源利用率.另外,算法中采用了分布式资源调度方法,D2D用户根据算法步骤自行搜索适合的目标信道并计算其发射功率,可以有效减少基站的信令开销.     

D2D/蜂窝通信模式切换与联合功率控制方案

设备直连（Device-to-Device, D2D）通信技术通过复用蜂窝系统的频谱资源提高频谱利用率,但D2D的引入会给蜂窝系统带来干扰。如何合理地选择D2D/蜂窝通信模式并进行功率优化控制,成为减小D2D和蜂窝系统间干扰、提升网络性能的关键。本文考虑D2D用户复用蜂窝上行链路场景,提出了一种基于距离和联合功率控制的通信模式选择方案。在该方案中,D2D用户和蜂窝用户与基站距离的比值决定了D2D用户是否采用Underlay模式进行通信,进而在约束蜂窝用户和D2D用户发射功率的条件下实现D2D链路和蜂窝链路的联合功率控制,最终推导出能够最大化系统总吞吐量的最优用户功率分配方案。根据仿真结果,本文提出的联合功率控制方案能够在降低系统间干扰的同时有效提高D2D和蜂窝系统的总吞吐量,进而提高了系统的性能。      

An efficient resource optimization scheme for D2D communication

With the rapid development of wireless technologies, wireless access networks have entered their Fifth-Generation (5G) system phase. The heterogeneous and complex nature of a 5G system, with its numerous technological scenarios, poses significant challenges to wireless resource management, making radio resource optimization an important aspect of Device-to-Device (D2D) communication in such systems. Cellular D2D communication can improve spectrum efficiency, increase system capacity, and reduce base station communication burdens by sharing authorized cell resources; however, can also cause serious interference. Therefore, research focusing on reducing this interference by optimizing the configuration of shared cellular resources has also grown in importance. This paper proposes a novel algorithm to address the problems of co-channel interference and energy efficiency optimization in a long-term evolution network. The proposed algorithm uses the fuzzy clustering method, which employs minimum outage probability to divide D2D users into several groups in order to improve system throughput and reduce interference between users. An efficient power control algorithm based on game theory is also proposed to optimize user transmission power within each group and thereby improve user energy efficiency. Simulation results show that these proposed algorithms can effectively improve system throughput, reduce co-channel interference, and enhance energy efficiency.     

D2D研究现状及发展前景

LTE Device to Device(D2D)Proximity Services(LTE终端直通近距离服务)即我们熟知的LTE-D2D(端到端)技术。2013年,D2D成为3GPP组织重点研讨技术之一,其标准化工作正在讨论完善之中。LTE-D2D是在LTE-A系统(辅助)控制或无网络基础设施的情况下,用户设备在授权频段上直接进行通信的技术。它的出现将在一定程度上缓解无线频谱资源匮乏的问题,并能够提升蜂窝系统频谱效率。文章对D2D通信的发展历程、场景和关键技术进行了介绍,最后展望D2D技术发展前景及在未来应用中的情况。     

D2D underlay massive MIMO hybrid networks with improved physical layer secrecy and energy efficiency

For us to meet the green and reliable communication requirement by the forthcoming fifth generation mobile networks, this paper focuses on a secrecy constrained device‐to‐device (D2D) underlay massive multiple‐input multiple‐output hybrid network, where the D2D user (DU) and cellular user (CU) links are exposed to passive malicious eavesdroppers. The D2D transmitters harvest the power from the signals of dedicated power beacons (PBs), but also the ambient radio frequency (RF) interference of CUs. The signals of PBs are known previously at the receivers of both the D2D and cellular users but are not known at eavesdroppers so that it can be regarded as an artificial noise. For the interested hybrid networks, we first present an energy‐harvesting scheme based on the inversion power control where the power received at the corresponding receiver is higher than the receiver's sensitivity. Then, by modeling the locations of network elements as Poisson point process and applying stochastic geometry, we derive the sufficient probability that a typical D2D transmitter harvests sufficient energy to establish communication links. Finally, with the derived sufficient probability, we evaluate the performance of the CUs and DUs in the achievable ergodic rate and the secrecy outage probability. Both the analytical and simulated results show that precious power of network is saved because of the ambient RF interference exploited, and the secrecy of both D2D and cellular links is improved simultaneously because of the signal of PBs modeled as artificial noises at CUs and DUs.     

Swarm intelligence‐based radio resource management for V2V‐based D2D communication

Internet of Things is a promising paradigm that provides the future network of interconnected devices. Device‐to‐Device (D2D) communication, which is considered as an enabler for vehicle‐to‐everything applications, has become an emerging technology to optimize network performance. In this paper, we study the Radio Resource Management (RRM) issue for D2D‐based Vehicle‐to‐Vehicle communication. The RRM key role is to assure the proficient exploitation of available resources while serving users according to their quality of service parameters. An Ant Colony Optimization (ACO)‐based Resource Allocation (ACORA) scheme is proposed in this paper. Swarm intelligence algorithm ACO is adopted to reduce the computational complexity while realizing satisfactory performance. Simulation results show promising performance of our proposed ACORA scheme.