GPS定位技术在航天器高动态导航中的应用问题研究

本文着重讲述了 GPS 系统在航天器动态导航中的应用问题，分析了航天器高动态环境下对 GPS 信号的捕获和跟踪所带来的影响。提出了 FFT 码快速捕获算法，以及二阶 FLL 与三阶 PLL 混合载波跟踪方案，并对码环和载波环的结构和参数的设计方法进行了说明。仿真结果和分析表明该方案能在航天器高动态环境下实现信号的快速捕获，且能较好地满足接收机动态性能和跟踪精度的要求。     

高动态接收机的关键问题研究

为检测高动态GPS(Global Positioning System)信号,需要设计码环及载波环的捕获与跟踪数字系统.在高动态下,在GPS信号的码跟踪和载波捕获与跟踪问题中最关键的是要解决在高加速度下的载波跟踪问题.主要讨论了在高动态下,结合GEC公司的十二通道相关器GP2021,载波跟踪环路的特性并在此基础上提出了一个新的方法来改善载波跟踪环路的性能.     

高动态GPS接收机环路跟踪技术研究

为了解决加速度45g、加加速度10g/s的高动态环境下GPS信号的载波跟踪、码跟踪及其精度问题,提出了一种综合考虑动态和精度性能的载波环和码环优化设计方案,探讨了高动态情况下载波环和码环的结构设计及捕获转跟踪技术,分析了FLL/PLL/DLL环路的动态应力、暂态响应和鉴别器特性,总结了实用的控制策略和环路带宽。该方案经自主开发的软件接收机测试验证,可以在达到很高动态特性的同时满足一定的测距精度和定位精度要求。     

高动态扩频信号的载波跟踪技术研究

针对高动态环境下扩频信号的载波捕获与跟踪问题,本文分析了多普勒频移对锁相环、锁频环以及环路滤波器设计的影响,以及高动态环境中载波快速捕获问题,在此基础上提出了一种数字复合软环的设计方法,计算机仿真结果表明这种数字复合软环能有效地解决载波快捕与精跟踪的问题.     

高动态扩频信号的载波跟踪技术研究

针对高动态环境下扩频信号的载波捕获与跟踪问题，本文分析了多普勒频移对锁相环、锁频环以及环路滤波器设计的影响，以及高动态环境中载波快速捕获问题，在此基础上提出了一种数字复合软环的设计方法，计算机仿真结果表明这种数字复合软环能有效地解决载波快捕与精跟踪的问题．     

基于DSP的高动态接收机载波捕获跟踪技术

介绍了高动态GPS接收机的码捕获与载波跟踪的原理,设计了一种基于高速数字信号处理(DSP)技术的PLL FLL环混合全数字高动态载波跟踪技术方案,同时给出了一种在连续高动态下载波跟踪算法即基于交叠离散傅里叶变换的频率跟踪算法(ODAFC),并对此算法进行了仿真验证.仿真结果证明了该算法的正确性.     

基于最大似然估计的高动态GPS载波跟踪环

 基于最大似然估计提出了一种全新设计的GPS载波跟踪环结构,并将该环路应用于高动态、低信噪比条件下的GPS载波频率跟踪. 文中给出了环路的设计细节,并详细讨论了环路中各模块的功能及模块之间的参数传递. 利用具有典型高动态参数的GPS载波信号对环路的跟踪性能进行了测试. 测试结果表明,与普通GPS接收机的载波跟踪环相比,该环路对高动态环境下的失锁门限和门限附近的频率跟踪精度均有显著改善.     

扩频通信中PN码序列的捕获

扩频信号的捕获与跟踪是扩频接收机进行定位解扩的基础,文中基于FPGA进行了扩频信号捕获与跟踪的设计实现。分析了该方案的匹配滤波器、载波跟踪环、码跟踪环的设计与实现方法。并通过BPSK调制,使用非相干扩频通信的PN码并行捕获算法实现信号的捕获。     

高动态环境载波跟踪环路的设计

为了满足高动态环境下对测轨定位的需求,对数字中频接收机载波同步跟踪关键技术进行了研究。针对高动态环境下载波同步需要解决的捕获带宽、捕获速度与跟踪精度的矛盾,综合利用了传统数字锁频环路和数字锁相环路的优点,设计了一种适合高动态环境下数字中频接收机的锁频联合锁相环工作的环路方案。仿真和测试结果表明:改进算法解决了环路跟踪精度和动态性能不能兼顾的矛盾,信号跟踪环路能在高动态环境中实现对信号的稳定跟踪。     

高动态下GPS接收机载波跟踪技术的研究

针对高动态环境下GPS接收信号的载波捕获与跟踪问题，分析研究了几种适合的GPS信号跟踪的频率估计算法，提出了一种全数字化的高动态GPS接收机载波跟踪技术设计方案，最后通过仿真验证CPAFC算法的正确性。     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Teleportation of an arbitrary unknown N-qubit entangled state under the controlling of M controllers

A new quantum protocol to teleport an arbitrary unknown N-qubit entangled state from a sender to a fixed receiver under M controllers(M < N) is proposed. The quantum resources required are M non-maximally entangled Greenberger-Home-Zeilinger (GHZ) state and N-M non-maximally entangled Einstein-Podolsky-Rosen (EPR) pairs. The sender performs N generalized Bell-state measurements on the 2N particles. Controllers take M single-particle measurement along x-axis, and the receiver needs to introduce one auxiliary two-level particle to extract quantum information probabilistically with the fidelity unit if controllers cooperate with it.     

Diode-end-pumped Nd:YVO4/LBO lasers with 4.2W continuous-wave output at 457 nm

A continuous-wave (CW) 457 nm blue laser operating at the power of 4.2 W is demonstrated by using a fiber coupled laser diode module pumped Nd: YVO4 and using LBO as the intra-cavity SHG crystal With the optimization of laser cavity and crystal parameters, the laser operates at a very high efficiency. When the pumping power is about 31 W, the output at 457nm reaches 4.2 W, and the optical to optical conversion efficiency is about 13.5% accordingly. The stability of the out putpower is better than 1.2% for 8 h continuously working.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.