Plasticization of cellulose diacetate by reaction with maleic anhydride,glycerol, and citrate esters during melt processing

To accomplish the stable internal plasticization of cellulose diacetate (CDA), maleic anhydride (MAH) and glycerol (Gly) were used as reactive plasticizers. The plasticization method used was based on a melt‐processing reaction of CDA with MAH and Gly. MAH and Gly (MG)‐plasticized CDA showed stiff and brittle properties; that is, low elongation at break and high modulus. Thus, citrate esters were used as coplasticizers to improve physical properties. The resulted plasticized materials were optically clear, and showed attractive mechanical properties. The grafting of MG oligoesters to the free hydroxyl groups in CDA and their homo‐oligomerization were accelerated by two‐step kneading process, and verified by FTIR and GPC measurements. Differential scanning calorimeter (DSC) analysis revealed decreases of 80–100°C in the glass transition temperature (T_g) of CDA by these plasticizations. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 243–250, 2001     

Graft polycondensation of microfibrillated jute cellulose with oligo(L‐lactic acid) and its properties

In order to improve the compatibility with different polymer matrices, microfibrillated jute cellulose (MFJC) was surface grafted by oligo(l ‐lactic acid) (OLA) via graft polycondensation reaction catalyzed by Sn(Oct)₂ in toluene medium. The effects of the OLA concentration, Sn(Oct)₂ concentration, reaction time, temperature, and pressure on the progress of the graft polycondensation were investigated. Maximum grafting was found 44% at optimum reaction condition. The observation was confirmed by Fourier transform infrared spectroscopy, ¹³C‐NMR spectrometry, and X‐ray photoelectron spectroscopy. The morphology and crystalline structure of the graft copolymer (MFJC‐g‐OLA) were examined by scanning electron microscopy and wide angle X‐ray diffraction, respectively. Measurements showed that initial morphological integrity of MFJC changed due to incorporation of amorphous OLA onto MFJC surface, as a result decreases crystallinity. Extracted MFJC‐g‐OLA was also characterized by thermo‐gravimetric analysis. Results reflect the enhanced hydrophobicity and thermal stability of the MFJC as a consequence of this modification. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40139.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles coated by new functionalized tetraaza-2,3 dialdehyde micro-crystalline cellulose: synthesis,characterization, and catalytic application for degradation of Acid Yellow 17

In this study, we developed an original approach for preparing cellulose-coated magnetite nanoparticles (NPs). Two novel Schiff bases (PDA-g-DAC) and [Bz-(PDA-g-DAC)] were synthesized via condensation reactions of periodate oxidized micro-crystalline cellulose (DAC) with o-phenylene diamine (PDA) to obtain its azomethine derivative with 85% yield. Subsequently, the functionalization of (PDA-g-DAC) with benzil (Bz) yields the tetraaza macrocycle [Bz-(PDA-g-DAC)]. The physicochemical characterization of the condensation products was performed using ¹³CNMR, FTIR, ATG, DSC, and X-ray diffraction techniques. Magnetic nanomaterial-based Schiff base cellulose was successfully prepared using in situ chemical co-precipitation of coordinated ferric and ferrous ions in cellulose Schiff base matrix under optimized conditions, and then, its magnetic properties were characterized. The results demonstrated that the Fe₃O₄ NPs coated with [Bz-(PDA-g-DAC)] were homogeneously coated in the matrix under ultrasonic irradiation with the saturation magnetization of 69.50 emu g^?1. In addition, XRD line broadening analysis showed that the average particle size of the NPs was 37.3 nm. Furthermore, FTIR spectra demonstrated that [Bz-(PDA-g-DAC)] concavity was anchored to magnetite Fe₃O₄ NPs through azomethine groups. Vibrating sample magnetometry (VSM) of [Bz-(PDA-g-DAC)@Fe₃O₄] magnetic nanocomposite samples showed the typical behavior of ferromagnetism. This study provided a green and facile method to inhibit magnetic nanoparticle aggregation. Activity results revealed that the prepared [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst shows the maximum activity for degradation of Acid Yellow 17 (AY17) compared to other prepared catalysts. After degradation reaction, the [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst was recovered from the reaction mixture via an external magnet and used for further five consecutive cycles with excellent catalytic activity, successively, which was comparable to the fresh catalyst. The catalyst degradation efficiency and its easy separation exhibited that [Bz-(PDA-g-DAC)@Fe₃O₄] catalyst is a promising material for the removal of AY17 from aqueous solutions in green chemistry perspectives.     

Synthesis,characterization, and drug‐release behavior of amphiphilic quaternary ammonium chitosan derivatives

A new type of amphiphilic quaternary ammonium chitosan derivative, 2‐N‐carboxymethyl‐6‐O‐diethylaminoethyl chitosan (DEAE–CMC), was synthesized through a two‐step Schiff base reaction process and applied to drug delivery. In the first step, benzaldehyde was used as a protective agent for the incorporation of diethylaminoethyl groups to form the intermediate (6‐O‐diethylaminoethyl chitosan). On the other hand, NaBH₄ was used as a reducing agent to reduce the Schiff base, which was generated by glyoxylic acid, for the further incorporation of carboxymethyl groups to produce DEAE–CMC. The structure, thermal properties, surface morphology, and diameter distribution of the resulting chitosan graft copolymers were characterized by Fourier transform infrared spectroscopy, ¹H‐NMR, thermogravimetric analysis, differential scanning calorimetry, X‐ray powder diffraction, scanning electron microscopy, and laser particle size analysis. Benefiting from the amphiphilic structure, DEAE–CMC was able to be formed into microspheres in aqueous solution with an average diameter of 4.52 ± 1.21 μm. An in vitro evaluation of these microspheres demonstrated their efficient controlled release behavior of a drug. The accumulated release ratio of vitamin B₁₂ loaded DEAE–CMC microspheres were up to 93%, and the duration was up to 15 h. The grafted polymers of DEAE–CMC were found to be blood‐compatible, and no cytotoxic effect was shown in human SiHa cells in an MTT [3‐(4, 5‐dimethyl‐thiazol‐2‐yl)‐2, 5‐diphenyltetrazolium bromide] cytotoxicity assay. These results indicate that the DEAE–CMC microspheres could be used as safe, promising drug‐delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39890.     

Preparation and flocculation behavior of cellulose‐g‐PMOTAC copolymer

As a contribution to the wider use of biodegradable materials, this article reports the synthesis and testing of cationic polyelectrolyte cellulose derivatives for use as flocculation chemicals. Cellulose macroinitiator is synthesized in DMAc/LiCl solvent system by direct acylation of cellulose with 2‐bromoisobutyryl bromide. Cellulose‐graft‐poly(N,N‐dimethyl aminoethyl methacrylate) (cellulose‐g‐PDMAEMA) copolymers are prepared by copper‐mediated radical polymerization in homogeneous medium. Formation of the macroinitiator and graft copolymers is confirmed by ATR‐FTIR and ¹H NMR. Quaternization of the graft chains to poly(methacryloxyethyl trimethylammonium chloride) (PMOTAC) produces cellulose‐g‐PMOTAC, which performs similarly to a commercial product in flocculation of pulp and kaolin. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40448.     

A chelating cellulose adsorbent for the removal of Cu(II) from aqueous solutions

Regenerated cellulose wood pulp was grafted with the vinyl monomer glycidyl methacrylate (GMA) using ceric ammonium nitrate as initiator and was further fuctionalised with imidazole to produce a novel adsorbent material, cellulose‐g‐GMA‐imidazole. All cellulose, grafted cellulose and functionalized cellulose grafts were physically and chemically characterized using a number of analytical techniques, including elemental analysis, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential thermal analysis, and scanning electron microscopy. The cellulose‐g‐GMA material was found to contain 1.75 mmol g^?1 epoxy groups. These epoxy groups permitted introduction of metal binding functionality to produce the cellulose‐g‐GMA‐imidazole final product. Following characterization, a series of adsorption studies were carried out on the cellulose‐g‐GMA‐imidazole to assess its capacity in the removal of Cu²⁺ ions from solution. Cellulose‐g‐GMA‐imidazole sorbent showed an uptake of ～70 mg g^?1 of copper from aqueous solution. The adsorption process is best described by the Langmuir model of adsorption, and the thermodynamics of the process suggest that the binding process is mildly exothermic. The kinetics of the adsorption process indicated that copper uptake occurred within 30 min and that pseudo‐second‐order kinetics best describe the overall process. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 2006     

Crosslinking reactions of oxidized cellulose fiber. I. Reactions between dialdehyde cellulose and multifunctional amines on lyocell fabric

Fibrillation‐controlled lyocell fibers were developed by crosslinking reactions between dialdehyde cellulose (DAC) and multifunctional amines. DAC lyocell fibers were manufactured by partial oxidation with sodium metaperiodate and were successfully crosslinked with two multifunctional amines by Schiff‐base formation. The amorphous regions and the char formations, which were characterized by differential scanning calorimetry and thermogravimetric analysis, increased with the degree of oxidation. After the crosslinking reactions, an increase in the amorphous regions also appeared, whereas the thermal stability was somewhat improved by the chain crosslinking. These results were in good agreement with viscosity‐average degree of polymerization values in that they diminished with oxidation level and increased with the crosslinking reactions. The water retention value and moisture regain value decreased with the oxidation and crosslinking levels, which implied that the swellability of fibers and the water absorbency in characteristic sites decreased with them. The increase in the dry crease recovery angle also confirmed the presence of hemiacetal crosslinks in the DAC and amine crosslinks between the DAC and the amines. The fibrillation grade of the crosslinked fibers diminished with oxidation level and the amine concentration. In particular, the fibrillation properties of the crosslinked fibers with 4‐hydroxy‐2,4,6‐triaminopyrimidine sulfate salt were more easily controlled than those of the crosslinked fibers with 2,4,6‐triamino‐1,3,5‐triazine. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The effect of graft copolymers of maleic anhydride and epoxy resin on the mechanical properties and morphology of PP/ABS blends

In this work, maleic anhydride‐grafted polypropylene (PP‐g‐MAH) and maleic anhydride‐grafted poly(acrylonitrile‐butadiene‐styrene) (ABS‐g‐MAH) at 2 : 1 mass ratio were added as a compatibilizer in the PP/ABS blends. The compatibilizing effect was evaluated by adding the graft copolymers together with epoxy resin/imidazole curing agent (E51/2E4MZ). The reaction in reactive extrusion, morphological structure, and properties of PP and ABS blends were investigated by using infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X‐ray spectrum, transmission electron microscope (TEM), dynamic thermomechanical analysis (DMA), differential scanning calorimetry (DSC), and mechanical properties tests. The results showed that the compatibilizing effect was greatly improved because of the addition of the graft copolymers together with epoxy resin/imidazole curing agent (E51/2E4MZ) because the link structure of PP‐g‐MAH and ABS‐g‐MAH was formed by the reaction of anhydride group with epoxy group catalyzed by the imidazole. The size of the dispersed phase decreased dramatically, the interfacial adhesion between ABS particles and PP matrix was improved, and the tensile strength and flexural modulus of the PP/ABS blends increased further. The optimizing properties were obtained at 3 phr E51/2E4MZ. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40898.     

Development of a DOPO‐containing melamine epoxy hardeners and its thermal and flame‐retardant properties of cured products

In this study, a novel Schiff base of melamine used as flame‐retardant curing agent for epoxy resins, was synthesized via condensation reaction of 4‐hydroxybenzaldehyde with melamine, followed by the addition of 9,10‐dihydro‐9‐oxa‐10‐phosphaphen‐anthrene 10‐oxide (DOPO) to the resulting imine linkage. The structure of DOPO‐containing melamine Schiff base (P‐MSB) was characterized by Fourier transformed infrared spectroscopy, ¹H‐nuclear magnetic resonance (¹H‐NMR) and ³¹P‐NMR. The compound (P‐MSB) was used as a reactive flame retardant in o‐cresol formaldehyde novolac epoxy resin (CNE) to prepare flame‐retardant epoxy resins for electronic application. The thermal and flame‐retardant properties of the epoxy resins cured by various equivalent ratios phenol formaldehyde novolac (PN) and P‐MSB were investigated by the nonisothermal differential scanning calorimetry, the thermogravimetric analysis, and limiting oxygen index test. The obtained results showed that the cured epoxy resins possessed high T_g (165°C) and good thermal stability (T_5%, 321°C). Moreover, the P‐MSB/CNE systems exhibited higher limiting oxygen index (35) and more char was maintained in P‐MSB/CNE systems than that in PN/CNE system and the effective synergism of phosphorus–nitrogen indicated their excellent flame retardancy. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Effect of dimethyl sulfoxide on synthesis of thermoplastic cellulose‐Graft‐poly(l‐lactide) copolymer using ionic liquid as reaction media

In this study, ring‐opening graft polymerization of l ‐lactide onto cellulose was carried out homogeneously in ionic liquid (IL)/dimethyl sulfoxide (DMSO) co‐solvent as a reaction media. Through the effective control of high viscosity and steric hindrance caused by the interaction between the IL and the hydroxyl group of cellulose by adding DMSO as a co‐solvent, cellulose‐graft‐poly(l ‐lactide) (Cell‐g‐PLLA) copolymer with higher substitution efficiency was successfully prepared, at relatively low concentration of l ‐lactide. The maximum values of molar substitution, degree of lactyl substitution, and degree of polymerization of poly(l ‐lactide) in the copolymer were 3.76, 1.74, and 2.16, respectively, determined by ¹H‐NMR. The prepared cell‐g‐PLLA copolymers showed thermal plasticization with a glass transition temperature of 155°C. In addition, the thermal processibility could be improved as the amount of grafted PLLA in the copolymer increased. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41331.     

Cotton‐fabric‐grafted poly(N‐isopropyl acrylamide) initiated by ammonium peroxydisulfate

In this article, we report that thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAAm) was successfully grafted onto a cotton fabric (CF) surface by free‐radical solution grafting polymerization; we obtained a thermoresponsive CF‐grafted PNIPAAm. This reaction system only contained four constituents: the monomer, solvent, initiator, and CFs. Ammonium peroxydisulfate was chosen as the initiator, and water was chosen as the solvent. A series of initiator concentrations and grafting polymerization temperatures were used in the experiments, and their effects on the grafting ratio (G) were also studied. Also, the effects of the G of CF‐g‐PNIPAAm on their corresponding thermoresponses was studied further. The structure of CF‐g‐PNIPAAm was characterized by Fourier transform infrared spectroscopy–attenuated total reflectance analysis and scanning electron microscopy analysis. The G of CF‐g‐PNIPAAm was measured by a gravimetric method. The thermoresponse of CF‐g‐PNIPAAm was characterized by modulated differential scanning calorimetry, water contact angle measurements, and wetting time measurements. The experiments manifested the following results: (1) the initiator concentration and grafting polymerization temperature both influenced G, (2) the grafted PNIPAAm covered the CF surface, (3) the CF‐g‐PNIPAAm showed thermoresponsive hydrophilicity/hydrophobicity, and (4) a relationship existed between the thermoresponse of CF‐g‐PNIPAAm and the corresponding G. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41193.     

Synthesis and characterization of dialdehyde cellulose/amino-functionalized MCM-41 core-shell microspheres as a new eco-friendly flame-retardant nanocomposite

Using proper flame-retardant materials when constructing buildings or fabricating devices is the most important fire safety guidelines. The halogen and phosphorus-based compounds are among the most effective flame retardants. However, most of these compounds are recognized to have a harmful effect on human body and the environment during combustion. In this context, we designed and synthesized a new eco-friendly flame-retardant nanocomposite by combining dialdehyde cellulose (DAC) and amino-functionalized mesoporous silica MCM-41 (N-M41). Spherical N-M41 nanoparticles have been successfully prepared in one-pot reaction using tetraethyl orthosilicate and (3-aminopropyl)triethoxysilane (APTES), and then coated with different amounts of DAC through Schiff base reaction between the carbonyl group of DAC and NH₂ of APTES. The resulted DAC@N-M41 nanocomposite was characterized by XRD, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy, differential thermal analysis (DTA) and thermogravimetry analysis (TGA). TEM micrographs revealed that this nanocomposite was made up of core-shell nanospheres structure with narrow size distribution (ca. 140 nm). DTA and TGA analysis revelated that the presence of silica within the nanocomposite can effectively increase the char yield, decrease the heat release, and improve the fire performance of the prepared nanocomposite. A mechanism of the reduction in flammability of this nanocomposite has been proposed.     

Synthesis,characterization, and mechanical properties of a novel terphenyl liquid crystalline epoxy resin

A novel terphenyl liquid crystalline (LC) epoxy resin was synthesized and characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC), and polarizing optical microscopy. Depending on the curing temperature, the synthesized resin formed both smectic and nematic LC phases. A time‐temperature‐transformation diagram was constructed to optimize the curing process, which helped in the preparation of LC and isotropic system. The terphenyl epoxy resin obtained exhibited higher acid resistance than a comparable Schiff‐base epoxy resin, and also displayed excellent fracture toughness. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41296.     

Ethylene–propylene copolymer/ordered polysilsesquioxane nanocomposites prepared via organic acid‐ or base‐catalyzed binary silica water‐crosslinking reactions

In situ silica sol–gel‐derived organic–inorganic hybrid materials, which comprise a vinyltrimethoxysilane‐grafted ethylene–propylene copolymer (EPR‐g‐VTMS) and n‐hexyltrimethoxysilane (HTMS), were successfully prepared in the presence of an organic acid and base catalyst. Benzenesulfonic acid and aniline were selected as the organic acid and base catalyst, respectively, to examine the progress and effect of progressive changes in the silane water‐crosslinking reaction of EPR‐g‐VTMS/HTMS composites. The water‐crosslinked EPR‐g‐VTMS/HTMS composites were characterized by means of attenuated total reflectance Fourier transform infrared spectroscopy, gel content, solid‐state ²⁹Si cross‐polarization/magic‐angle spinning NMR, wide‐angle X‐ray scattering, tensile strength and field‐emission scanning electron microscopy measurements. These results revealed that the type of catalyst has a substantial influence on the nature of siloxane bonds and eventually the physical tensile properties of the water‐crosslinked EPR‐g‐VTMS/HTMS composites, which can be explained mainly from knowledge of the traditional acid‐ and base‐catalyzed silica sol–gel reaction. Moreover, an in‐depth analysis of the aniline‐catalyzed composites indicated the formation of ladder‐type poly(n‐hexylsilsesquioxane)s and the presence of a highly ordered structure with a thickness equal to the length of two n‐hexyl groups in all‐trans conformation. We demonstrate potential for the future design of highly ordered silicate‐based organic–inorganic hybrid nanocomposites. Copyright © 2009 Society of Chemical Industry     

Improved synthesis of a branched poly(ethylene imine)‐modified cellulose‐based adsorbent for removal and recovery of Cu(II) from aqueous solution

This study focuses on an improved synthesis of a branched poly (ethylene imine) (PEI)‐modified cellulose‐based adsorbent (Cell‐g‐PGMA‐PEI). We aim to improve the adsorbent capacity by reducing side reaction of epoxide ring opening during graft copolymerization of glycidyl methacrylate (GMA) onto cellulose which increases the content of epoxy groups, anchors to immobilize branched PEI moieties. FTIR spectra provided the evidence of successful graft copolymerization of GMA onto cellulose initiated by benzoyl peroxide (BPO) and modification with PEI. The amount of epoxy groups of Cell‐g‐PGMA was 4.35 mmol g^?1 by epoxy titration. Subsequently, the adsorption behavior of Cu(II) on cell‐g‐PGMA‐PEI in aqueous solution has been investigated. The data from the adsorption kinetic experiments agreed well with pseudo‐second‐order model. The adsorption isotherms can be interpreted by the Langmuir model with the maximum adsorption capacity of 102 mg g^?1 which was largely improved compared with the similar adsorbent reported. The dynamic adsorption capacity obtained from the column tests was 119 mg g^?1 and the adsorbent could be regenerated by HCl of 0.1 mol L^?1. Results indicate that the novel pathway for the synthesis of Cell‐g‐PGMA‐PEI exhibits significant potential to improve the performance of adsorbents in removal and recovery of Cu(II) from aqueous solution. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Behavior of cellulose liquefaction after pretreatment using ionic liquids with water mixtures

Ionic liquid (IL)‐water mixtures were applied in cellulose pretreatment experiment and the pretreated cellulose was used in subsequent phenol liquefaction process as a new application method. Cellulose recovery rate and the average molecular weight (M_w) of pretreated cellulose were investigated to understand the influence of these mixtures on cellulose structure. X‐ray diffraction, Fourier transform infrared, gel permeation chromatograph, and scanning electron microscope were used to clarify the changes of pretreated cellulose. The liquefied residues from untreated cellulose and pretreated cellulose were considered as significant index to determine the effect of IL‐water mixtures on cellulose. Moreover, liquefied residues were initially characterized by the variation of the average M_w. It was suggested that the lower M_w of cellulose obtained in IL‐water mixtures, and the crystalline structure was disrupted. So, some cracks were found on the cellulose surface obviously. The liquefied residues result suggested that the pretreated cellulose obtained the lower residues at the same time or the same amount of residues by using the less time. The behavior of cellulose liquefaction efficiency using IL‐water mixture pretreatment was discussed. The lower M_w of cellulose was the major factor, which accelerates the cellulose phenol liquefaction process efficiency. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40255.     

Surface treatment of cellulose fibers with methylmethacrylate for enhanced properties of in situ polymerized PMMA/cellulose composites

Cellulose micro/nanofibers (CNF), prepared from jute fibers were surface treated with methyl methacrylate (MMA) for better dispersion into poly methyl methacrylate (PMMA) matrix. PMMA/cellulose composites were prepared by in situ suspension polymerization technique. The surface treatment of CNF was confirmed by Fourier transform infrared spectroscopy (FTIR) and Nuclear magnetic resonance (NMR) analysis. MMA‐treated cellulose micro/nanofibers (MCNF) demonstrated improved affinity and dispersion in MMA monomer as well as in the PMMA/cellulose composites. Thermal properties of the cellulose composites were analyzed by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The glass transition temperature (T_g) of PMMA increased by nearly 19°C in the in situ cellulose composites compared to that of unreinforced PMMA as indicated by DSC. TGA showed increased thermal stability of the cellulose composites. Enhanced tensile properties as well as significantly lower moisture uptake were observed in the in situ prepared PMMA/cellulose composites. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39808.     

High performance polyamide 6 composites prepared by reactive extrusion

To improve the properties of polyamide 6 (PA6) composites, a series of modified PA6 composites was prepared by reaction extrusion. An amorphous PA6 was first obtained by the complexing reaction of Li⁺ in lithium chloride with amino groups, and then epoxy resins, nano‐SiO₂ as well as POE‐g‐MAH were in turn added into the PA6/LiCl system. The effect of different additives on the crystallization behavior and mechanical properties of PA6 composites was well‐studied by X‐ray diffraction (XRD), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), scanning electron microscopy (SEM), and mechanical properties tests. The results demonstrated that PA6 was amorphous at 6 phr lithium chloride and a network structure was formed in PA6 matrix in the presence of epoxy resins, thus the mechanical properties of composites greatly were enhanced. However too many nano‐SiO₂ particles might impair the tensile strength of PA6 composites. Additionally, a PA6 composite with excellent properties was obtained in the presence of POE‐g‐MAH due to the crystal form change in PA6 matrix and the strong interaction between PA6 and POE‐g‐MAH. POLYM. COMPOS., 35:985–992, 2014. © 2013 Society of Plastics Engineers     

Poly(acrylic acid‐co‐acrylamide‐co‐2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted nanocellulose/poly(vinyl alcohol) composite for the in vitro gastrointestinal release of amoxicillin

Superabsorbent polymer composites (SAPCs) are very promising and versatile materials for biomedical applications. This study concentrates on the development of novel cellulose‐based SAPC, Poly(acrylic acid‐co‐acrylamide‐co?2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted nanocellulose/poly(vinyl alcohol) composite, P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA, as a potential drug delivery vehicle. Amoxicillin was selected as a model drug, which is used for the treatment of Helicobacter pylori induced peptic and duodenal ulcers. P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA was synthesized by graft copolymerization reaction, and FTIR, XRD, SEM, and DLS analyses were performed for its characterization. Equilibrium swelling studies were conducted to evaluate the stimuli‐response behavior of the SAPC and found that equilibrium swelling was dependent on pH, contact time, temperature, ionic strength, concentration of crosslinker and PVA. Maximum drug encapsulation efficiency was found out by using different concentrations of amoxicillin. Drug release studies were carried out at simulated gastric and intestinal fluids and the release % was observed as maximum in intestinal fluids within 4 h. The drug release kinetics was investigated using Peppas' potential equation and follows non‐Fickian mechanism at pH 7.4. Thus, the drug release experiments indicate that P(AA‐co‐AAm‐co‐AMPS)‐g‐NC/PVA would be a fascinating vehicle for the in vitro administration of amoxicillin into the gastrointestinal tract. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40699.     

H3PW12O40·4H2O as an efficient catalyst for the conversion of cellulose into partially substituted cellulose acetate

The preparation of partial acetylation of cellulose derived from rice straw was catalyzed by phosphotungstic acid with various numbers of crystal water, and H₃PW₁₂O₄₀·4H₂O was found to be as effective catalyst. The yield of the cellulose acetate was significantly enhanced by converting cellulose directly isolated from rice straw into microcrystalline cellulose before acetylation. The optimization of the acetylation was investigated by varying the amount of catalyst and acetic anhydride as well as reaction conditions including reaction time and medium, and a degree of substitution (DS) value of 2.29 and yield of 62.9% were obtained under the optimized conditions. The structure and the formation of the acetylated product were confirmed by Fourier transform infrared spectroscopy (FTIR) and powder X‐ray diffraction (XRD) technique, the thermal properties were determined by thermal analysis including thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC), and the morphology was observed by scanning electron microscope (SEM). © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41212.