纳米表面工程的研究进展及展望

分析列举了近些年来国内外利用各种表面技术手段制备纳米结构表面的进展和成果。尤其重点介绍了热喷涂法制备纳米结构Al2O3／TiO2陶瓷涂层和纳米硫化物自润滑涂层的研究成果。最后对纳米表面工程的发展前景做了展望。     

热喷涂制备纳米结构TiO_2涂层及其自清洁性能研究

利用液相热喷涂方法在铝过渡层表面制备纳米结构TiO_2涂层,对梯度涂层的组织成分和性能进行表征。结果表明:液相热喷涂工艺能有效地保持原始TiO_2粉末的晶型和纳米结构特征。所制备的纳米结构TiO_2涂层对亚甲基蓝的降解效率优于商用P25涂层,1h内降解率达到70%。由于铝涂层和TiO_2纳米结构涂层的综合效应,所制得的涂层具有优异的防腐蚀和自清洁性能。     

纳米表面工程基本问题及其进展

阐述了纳米表面工程的产生背景、内涵、特点和科学问题,详细阐述了纳米表面工程在纳米超薄膜的制备、超光滑表面的制备、表面超微细图形加工、纳米结构涂层的组装、制备纳米复合功能涂层方面的研究进展。     

等离子喷涂纳米复合Ag/SnO2电触头材料放电性能研究

采用化学共沉淀法和高能球磨法制备纳米Ag-12%SnO2混合粉末,用等离子喷涂法将混合粉喷涂在Cu基表面,制备纳米复合Ag/SnO2涂层。测试涂层的物理性能和真空条件下的电性能,利用SEM观察分析放电后的表面组织结构。结果表明,纳米复合Ag/SnO2涂层越厚,密度越小,电阻率越大,而硬度与SnO2分布状况有关;涂层表面平整度影响耐电压强度值的分布;纳米复合Ag/SnO2涂层的分散电弧性能好,电弧烧蚀速率小。     

超音速等离子喷涂WC/Co纳米结构涂层性能研究

采用超音速等离子喷涂设备分别制备了含纳米结构和普通结构的WC／Co涂层。研究了2种涂层的结合强度、显微硬度和摩擦磨损性能，并用扫描电镜(SEM)和透射电镜(TEM)对涂层喂料(纳米WC／Co粉体)、涂层表面形貌和晶粒结构进行了分析。结果表明：含纳米结构涂层的性能优于普通的WC／Co喷涂涂层，纳米晶粒细晶强化是涂层性能提高的主要原因。     

等离子喷涂超高温热障涂层用纳米结构La2(Zr0.75Ce0.25)2O7球形喂料的研究

目的通过纳米粉体造粒技术制备出适合热喷涂超高温用纳米结构La2(Zr(0.75)Ce(0.25))2O7球形喂料,进而采用热喷涂方法制备出纳米结构的热障涂层,以满足下一代热障涂层服役温度需求。方法以化学共沉淀法合成的纳米La2(Zr(0.75)Ce(0.25))2O7粉末为原料,通过球磨、喷雾干燥及热处理工艺制备出纳米结构的La2(Zr(0.75)Ce(0.25))2O7喂料,进而采用大气等离子喷涂方法制备出纳米结构La2(Zr(0.75)Ce(0.25))2O7热障涂层。利用扫描电镜(SEM)和透射电镜(TEM)对原始纳米粉体、纳米喂料及喷涂态涂层进行显微形貌和组织结构分析。此外,通过电感耦合等离子体原子发射光谱法(ICP-AES)对制备的纳米喂料进行成分分析。结果制备出的纳米结构La2(Zr(0.75)Ce(0.25))2O7喂料表面光滑、呈球形,成分与化学计量比基本一致。相对于原始纳米粉末,喂料晶粒长大并不显著。喷涂态涂层部分晶粒长大,但仍保留纳米结构。结论成功制备出纳米结构La2(Zr(0.75)Ce(0.25))2O7球形喂料及纳米结构热障涂层,有望作为下一代超高温热障涂层材料。     

电弧离子镀制备TiBN纳米复合涂层

目的在纯N_2气氛环境下,低温制备TiBN纳米复合涂层,为TiBN涂层工业化生产积累科学数据。方法采用离子源增强阴极电弧离子镀系统,在硬质合金衬底上制备TiBN纳米复合涂层,系统研究了N_2气压对TiBN涂层晶体结构、表面形貌、硬度和耐磨性能的影响。结果 N_2气压对TiBN纳米复合涂层的晶体结构、表面形貌、硬度及摩擦系数的影响明显。随着N_2气压的升高,TiBN涂层中的TiN晶相逐渐增多,TiB_2晶相逐渐减少,为TiN晶粒和TiB_2晶粒镶嵌于非晶BN基体的复合结构。在0.5 Pa气压下,涂层硬度达3150HV。对于对磨材料硬质合金而言,TiBN涂层的摩擦系数为0.4左右。结论离子源增强电弧离子镀技术可以用于TiBN涂层的制备,制备出的TiBN涂层为纳米晶镶嵌于非晶的纳米复合涂层,涂层的显微硬度较高。在TiBN纳米复合涂层的工业化生产中,沉积N_2气压不宜偏高。     

新型PEO/纳米结构ZrO_2镁合金涂层的抗菌活性及腐蚀行为（英文）

为了增强镁合金的耐腐蚀性和抗菌活性,先采用等离子体电解氧化(PEO)在镁合金上制备一层结合层,再用空气等离子喷涂(APS)制备纳米结构ZrO_2表面涂层。采用电化学试验研究涂层样品的腐蚀行为,采用琼脂扩散法对其进行大肠杆菌病原菌抑菌活性评价,并与无涂层样品进行对比。与PEO涂层和无涂层镁合金相比,PEO/纳米ZrO_2涂层样品的腐蚀电流密度最低,电荷传递阻力最高,相位角和阻抗模量最高。PEO结合涂层被纳米ZrO_2表面涂层完全密封,能够显著延缓侵蚀性离子向镁合金表面迁移,显著提高镁合金在模拟体液(SBF)中的耐蚀性。此外,PEO/纳米ZrO_2涂层的抗菌活性也高于PEO涂层和无涂层镁合金,这是由于ZrO_2纳米颗粒通过作用于细胞膜而降低了大肠杆菌的生长速率。     

等离子喷涂Al2O3-13％TiO2涂层微观组织形貌分析

采用微米粉末和纳米粉末,分别在45钢表面等离子喷涂Al2O3-13%TiO2涂层,测定了涂层的显微硬度和孔隙率,分析了涂层的显微组织。结果表明;微米尺寸粉末制备的Al2O3-13%TiO2涂层具有明显的层状结构;纳米尺寸粉末制备的Al2O3-13%TiO2涂层中有大量的未熔和半熔化粒子,粒子间结合紧密,涂层孔隙率小。     

等离子喷涂常规和纳米ZrO2-7％Y2O3热障涂层隔热性能

采用等离子喷涂工艺在TiAl合金表面制备常规和纳米ZrO2-7％Y2O3(质量分数)热障涂层,分析了两种涂层的组织结构,并对其隔热性能进行了比较.结果表明,等离子喷涂常规热障涂层呈典型的层状堆积特征,而纳米涂层为特殊的两相结构.相对于常规涂层,纳米涂层有较好的隔热性能;在1100℃时,等离子喷涂常规及纳米涂层的隔热温度分别为83、127℃.     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

新型的治疗阿尔茨海默氏症药物(1-二甲基磷酰基-2,2,2-三氯)-乙基-1-醇烟酸醋对体外神经细胞的作用

目的: 观察本实验室合成的一种治疗阿尔茨海默氏症(AD)的药物(1-二甲基磷酰基-2, 2, 2 -三氯)-乙基^-1-醇烟酸醋(NMF),对体外培养的皮层神经细胞活性的影响以及对海人藻酸(KA)所致的神经损伤的保护作用。方法: 采用体外培养皮层神经元的方法,解剖分离 15 d胚胎小鼠皮层神经细胞, 接种于 96孔板,48 h 后加药并培养 72 h,以 MIT 法 观察 NMF 对小鼠皮层神经细胞活性的影响;同时将接种于 24 孔板的细胞预先给予 NMF,d 3 时加或不加KA处理后,以台盼蓝染色鉴别并计数死、活细胞,可得出细胞的存活率。结果: NMF 明显促进胎鼠皮层神经元活性,其中 NMF1、0. 1、10nmol·L^-1促进神经元活性增殖率分别高达 34.7%、37.4%、36. 7%, NMF 明显促进正常胎鼠皮层神经元存活卒,与对照组比较,10nmol·L^-1 NMF 对皮层神经元的存活率分别提高 39.3%、73.5%。 NMF能显著 对抗 KA 所致的神经元损伤,与 KA 损伤组相比, NMF0.1、10、10nmol·L^-1对损伤皮层神经元的保护率分别为 77.30%、80.10%、84.15%。结论: NMF 明 显促进胎鼠皮层神经元的洁性、提高正常皮层神经元,的存活卒,并能有效地保护KA所致的神经元损伤,提示 NMF 是一种很有潜力的治疗 AD 的药物。     

THERMODYNAMICS STUDY ON THE DECOMPOSITION OF CHROMITE WITH KOH

Institute of Process Engineering, Chinese Academy of Sciences, China, has proposed a method for oxidative leaching of chromite with potassium hydroxide. Understanding the mechanism of chromite decomposition, especially in the potassium hydroxide fusion, is important for the optimization of the operating parameters of the oxidative leaching process. A traditional thermodynamic method is proposed and the thermal decomposition and the reaction decomposition during the oxidative leaching of chromite with KOH and oxygen is discussed, which suggests that chromite is mainly destroyed by reactions with KOH and oxygen. Meanwhile, equilibrium of the main reactions of the above process was calculated at different temperatures and oxygen partial pressures. The stable zones of productions, namely, K2CrO4 and Fe2O3, increase with the decrease of temperature, which indicates that higher temperature is not beneficial to thermodynamic reactions. In addition, a comparison of the general alkali methods is carried out, and it is concluded that the KOH leaching process is thermodynamically superior to the conventional chromate production process.     

INFLUENCE OF HEAT TREATMENT ON DAMPING BEHAVIOUR OF THE MAGNESIUM WROUGHT ALLOY AZ61

The effect of isochronal heat treatments for 1h on variation of damping, hardness and microstructural change of the magnesium wrought alloy AZ61 was investigated. Damping and hardness behaviour could be attributed to the evolution of precipitation process. The influence of precipitation on damping behaviour was explained in the framework of the dislocation string model of Granato and Lücke.     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

Effect of Rare Earth Doping on Impedance,Modulus and Conductivity Properties of Multiferroic Composites:0.5(BiLa_xFe_(1-x)O_3)–0.5(PbTiO_3)

The Lanthanum-doped bismuth ferrite–lead titanate compositions of 0.5(Bi LaxFe1-xO3)–0.5(Pb Ti O3)(x = 0.05,0.10,0.15,0.20)(BLxF1-x-PT) were prepared by mixed oxide method.Structural characterization was performed by X-ray diffraction and shows a tetragonal structure at room temperature.The lattice parameter c/a ratio decreases with increasing of La(x = 0.05–0.20) concentration of the composites.The effect of charge carrier/ion hopping mechanism,conductivity,relaxation process and impedance parameters was studied using an impedance analyzer in a wide frequency range(102–106Hz) at different temperatures.The nature of Nyquist plot confirms the presence of bulk effects only,and non-Debye type of relaxation processes occurs in the composites.The electrical modulus exhibits an important role of the hopping mechanism in the electrical transport process of the materials.The ac conductivity and dc conductivity of the materials were studied,and the activation energy found to be 0.81,0.77,0.76 and 0.74 e V for all compositions of x = 0.05–0.20 at different temperatures(200–300 °C).     

Using Finite Element and Contour Method to Evaluate Residual Stress in Thick Ti-6Al-4V Alloy Welded by Electron Beam Welding

This work was to reveal the residual stress profile in electron beam welded Ti-6Al-4V alloy plates(50 mm thick) by using finite element and contour measurement methods.A three-dimensional finite element model of 50-mmthick titanium component was proposed,in which a column–cone combined heat source model was used to simulate the temperature field and a thermo-elastic–plastic model to analyze residual stress in a weld joint based on ABAQUS software.Considering the uncertainty of welding simulation,the computation was calibrated by experimental data of contour measurement method.Both test and simulated results show that residual stresses on the surface and inside the weld zone are significantly different and present a narrow and large gradient feature in the weld joint.The peak tensile stress exceeds the yield strength of base materials inside weld,which are distinctly different from residual stress of the thin Ti-6Al-4V alloy plates presented in references before.     

Microstructures and Tensile Properties of Ultrafine-Grained Ni–(1–3.5) wt% SiC_(NP) Composites Prepared by a Powder Metallurgy Route

Silicon carbide nanoparticle-reinforced nickel-based composites(Ni–Si CNP),with a Si CNPcontent ranged from1 to 3.5 wt%,were prepared using mechanical alloying and spark plasma sintering.In addition,unreinforced pure nickel samples were also prepared for comparative purposes.To characterize the microstructural properties of both the unreinforced pure nickel and the Ni–Si CNPcomposites transmission electron microscopy(TEM) was used,while their mechanical behavior was investigated using the Vickers pyramid method for hardness measurements and a universal tensile testing machine for tensile tests.TEM results showed an array of dislocation lines decorated in the sintered pure nickel sample,whereas,for the Ni–Si CNPcomposites,the presence of nano-dispersed Si CNPand twinning crystals was observed.These homogeneously distributed Si CNPwere found located either within the matrix,between twins or on grain boundaries.For the Ni–Si CNPcomposites,coerced coarsening of the Si CNPassembly occurred with increasing Si CNPcontent.Furthermore,the grain sizes of the Ni–Si CNPcomposites were much finer than that of the unreinforced pure nickel,which was considered to be due to the composite ball milling process.In all cases,the Ni–Si CNPcomposites showed higher strengths and hardness values than the unreinforced pure nickel,likely due to a combination of dispersion strengthening(Orowan effects) and particle strengthening(Hall–Petch effects).For the Ni–Si CNPcomposites,the strength increased initially and then decreased as a function of Si CNPcontent,whereas their elongation percentages decreased linearly.Compared to all materials tested,the Ni–Si CNPcomposite containing 1.5% Si C was found more superior considering both their strength and plastic properties.     

Directional Growth of Tin Crystals Controlled by Combined Solute Concentration Gradient Field and Static Magnetic Field

A new method was introduced to achieve directional growth of Sn crystals. Microstructures in liquid(Pb)/liquid(Sn) diffusion couples were investigated under various static magnetic fields. Results show that the β-Sn crystals mainly reveal an irregular dendritic morphology without or with a relatively low static magnetic field(B0.3 T). When the magnetic field is increased to 0.5 T, the β-Sn dendrites close to the final stage of growth begin to show some directional character. With a further increase in the magnetic field to a higher level(0.8–5 T), the β-Sn dendrites have an enhanced directional growth character, but the dendrites show a certain deflection. As the magnetic field is increased to 12 T, the directional growth of the β-Sn dendrites in the center of the couple is severely destroyed. The mechanism of the directional growth of the β-Sn crystals and the deflection of the β-Sn crystals with the application of static magnetic field was tentatively discussed.