Systematization of active faults for the assessment of the seismic hazard

A systematization of active faults has been developed based on the progress of scientists from the leading countries in the world in the study of seismotectonics and seismic hazard problems. It is underlain by the concept of the fault-block structure of the geological-geophysical environment governed by the interaction of differently oriented active faults, which are divided into two groups—seismogenic and nonseismogenic faults. In seismogenic fault zones, the tectonic stress accumulated is relieved by means of strong earthquakes. Nonseismogenic fault zones are characterized by creep displacement or short-term, oscillatory, and reciprocal movements, which are referred to local superintense deformations of the Earth’s crust (according to the terminology used by Yu.O. Kuz’min). For a situation when a strong earthquake happens, a subgroup of seismodistributing faults has been identified that surround the seismic source and affect the distribution of the seismic waves and, as a consequence, the pattern of the propagation of the coseismic deformations in the fault-block environment. Seismodistributing faults are divided into transit and sealing faults. Along transit faults, secondary coseismic effects (landfalls, landslides, ground fractures, liquefaction, etc) are intensified during earthquakes. In the case of sealing faults, enhancement of the coseismic effects can be observed on the disjunctive limb nearest to the epicenter, whereas, on the opposite limb, the intensity of such effects appreciably decreases. Seismogenic faults or their systems are associated with zones of earthquake source origination (ESO), which include concentrated seismicity regions. In such zones, each earthquake source is related to the evolution of a fault system. ESO zones also contain individual seismogenic sources being focuses of strong earthquakes with M of ≥5.5 in the form of ruptures, which can be graphically represented in 2D or 3D as a surface projection of the source. Depending on the type of data based on which they are identified, individual seismogenic sources are divided into geological-geophysical and macroseismic sources. The systematization presented is the theoretical basis for and the concept of the relational database that is being developed by the authors as an information system for the generation of seismotectonic GIS projects required for the subsequent analysis of the seismic hazard and the assessment of the probability of the origination of macroseismic earthquake effects in a predetermined location.     

Seismic input at the archaeological site of Kancheepuram in Southern India

A probabilistic seismic hazard assessment at Kancheepuram in Southern India was carried out with the scope of defining the seismic input for the vulnerability assessment of historical and monumental structures at the site, in terms of horizontal Uniform Hazard Spectra and a suite of spectrum-compatible natural accelerograms to perform time-history analysis. The standard Cornell?CMcGuire and a zone-free approach have been used for hazard computations after the compilation of a composite earthquake catalogue for Kancheepuram. Epistemic uncertainty in the seismic hazard was addressed within a logic-tree framework. Deaggregation of the seismic hazard for the peak ground acceleration shows low seismicity at Kancheepuram controlled by weak-to-moderate earthquakes with sources located at short distances from the archaeological site. Suites of natural accelerograms recorded on rock have been selected by imposing a custom-defined compatibility criterion with the probabilistic spectra. The site of Kancheepuram is characterized by a seismicity controlled by weak-to-moderate earthquakes with sources at short distances from the site, the PGA expected for 475- and 2,475-year return period are, respectively, 0.075 and 0.132?g. The Indian code-defined spectra (DBE and MCE) tend to underestimate spectral ordinates at low periods. On the other hand, the PGA are comparable and the spectral ordinates for longer periods from the probabilistic study are significantly lower.     

The 1905 Chamonix earthquakes: active tectonics in the Mont Blanc and Aiguilles Rouges massifs

Linking earthquakes of moderate size to known tectonic sources is a challenge for seismic hazard studies in northwestern Europe because of overall low strain rates. Here we present a combined study of macroseismic information, tectonic observations, and seismic waveform modelling to document the largest instrumentally known event in the French northern Alps, the April 29, 1905, Chamonix earthquake. The moment magnitude of this event is estimated at M_w 5.3 ± 0.3 from records in Göttingen (Germany) and Uppsala (Sweden). The event of April 29 was followed by several afterschocks and in particular a second broadly felt earthquake on August 13, 1905. Macroseismic investigations allow us to favour a location of the epicentres 5–10 km N–NE of Chamonix. Tectonic analysis shows that potentially one amongst several faults might have been activated in 1905. Among them the right lateral strike-slip fault responsible for the recent 2005 M_w = 4.4 Vallorcine earthquake and a quasi-normal fault northeast of the Aiguilles Rouges massif are the most likely candidates. Discussion of tectonic, macroseismic, and instrumental data favour the normal fault hypothesis for the 1905 Chamonix earthquake sequence.     

Tectonic stress,seismicity, and seismic hazard in the southeastern Carpathians

Intermediate-depth earthquakes in the Vrancea region occur in response to stress generation due to descending lithosphere beneath the southeastern Carpathians. In this article, tectonic stress and seismicity are analyzed in the region on the basis of a vast body of observations. We show a correlation between the location of intermediate-depth earthquakes and the predicted localization of maximum shear stress in the lithosphere. A probabilistic seismic hazard assessment (PSHA) for the region is presented in terms of various ground motion parameters on the utilization of Fourier amplitude spectra used in engineering practice and risk assessment (peak ground acceleration, response spectra amplitude, and seismic intensity). We review the PSHA carried out in the region, and present new PSHA results for the eastern and southern parts of Romania. Our seismic hazard assessment is based on the information about the features of earthquake ground motion excitation, seismic wave propagation (attenuation), and site effect in the region. Spectral models and characteristics of site-response on earthquake ground motions are obtained from the regional ground motion data including several hundred records of small and large earthquakes. Results of the probabilistic seismic hazard assessment are consistent with the features of observed earthquake effects in the southeastern Carpathians and show that geological factors play an important part in the distribution of the earthquake ground motion parameters.     

Information background of 11th–15th centuries earthquakes located by the current catalogues in Vrancea (Romania)

Earthquake catalogues for Romania supply for 11th–15th century earthquakes located in the region of Vrancea records that consist of a complete set of parameters, including magnitude and depth. Scope of this paper is to verify the reliability and consistency of these parameters with the informative background as explicitly referenced by the catalogues. After retrieving the original sources they mention, the set of data appeared to be related almost exclusively to the Russian plain and too poor to be at the very origin of the parameter assessment. Data for 19th–20th century earthquakes, such as instrumental locations and CMT solutions, added to the understanding of the macroseismic response of the Russian plain to Vrancea earthquakes. On the one hand, the investigation and analysis of historical earthquake records for the fourteen events listed by the catalogues in the 11th–15th centuries has shown that for three earthquakes (1022, 1038, 1258) no primary sources could be traced, and three more earthquakes (1091, 1170 and 1328) are attested only by scarcely reliable records and had to be classified as doubtful, and one (1473) is simply a duplication of the 1471 event. On the other hand, the availability of data on recent earthquakes that may be compared to historical ones in terms of macroseismic effects allowed the authors to agree with the previous catalogue compilers’ solution with regard to both magnitude and depth of the past earthquakes for which do exist reliable primary historical records.     

Regionalization of seismic hazard in Greece based on seismic sources

A semi-probabilistic approach to the seismic hazard assessment of Greece is presented. For this reason, a recent seismotectonic model for shallow and intermediate depth earthquake sources, based on historical as well as on instrumental data, was used. Different attenuation formulae were proposed for the macroseismic intensity and the strong ground motion parameters for the shallow and the intermediate focal depth shocks. The data were elaborated in terms of McGuire's computer program, which is based on the Cornell's method.A grid of equally spaced points at 20 km distance was made and the seismic hazard recurrence curves for various parameters of the seismic intensity was estimated for each point. Finally, seismic hazard maps for the area of Greece were compiled utilizing the entire range of recurrence curves. These maps depict areas of equal seismic hazard and for every area the analytical relations of the typeSI =f(Tm), whereSI is a seismic intensity parameter andTm is the mean return period, were determined.     

Hazard mapping based on macroseismic data considering the influence of geological conditions

The object of this study is to consider directly the influence of regional geological conditions on the assessment of seismic hazard. It is assumed that macroseismic data at individual locations contain, in an average way, the influence of geological conditions.A Data Base referring to 199 historical (5) and instrumental (194, in the 1947–1993 period) events with macroseismic information in 1195 locations of Portugal was built. For any given seismic event, whenever macroseismic information was available at a location (town, village, etc.), an EMS-92 intensity value was estimated. To each one of those locations a geological unit, representing the most common type of soil, was assigned, based on the Geological Portuguese Map at a scale 1:500 000; the geological units were grouped into three categories: soft, intermediate and hard soils.The Data Base was used to determine the attenuation laws in terms of macroseismic intensity for the three different geological site conditions, using multiple linear regression analysis. The reasonability of the laws was tested by (i) checking residual distributions and (ii) comparing the map of isoseismals of important earthquakes with the isoseismals generated by the attenuation curves derived for each one of the three different soil classes, taking into consideration the soil class of each site. The main results of attenuation modeling are: high dispersion on macroseismic intensity data; all the models predict intensity values, for short hypocentral distances, lower than the ones observed; and for some important analyzed earthquakes and for the observed range of distances, the models confirm the expectancy that macroseismic intensity increases from hard to soft soil.The approach to obtain the hazard assessment at each location consisted in the use of the attenuation law specifically derived for the class of soil of that particular location. This method, which considers the influence of the regional geology, was illustrated with the mapping of hazard for the country for several return periods. Comparison with previous maps not taking into consideration the regional geological conditions emphasizes the importance of this new parameter. It can be concluded that (i) soil segmentation is clearly the cause for hazard increase in the region to the north of Lisbon, especially at sites with soft and intermediate soils as the ones in lower Tagus valley; the maximum increase on hazard is, in any case, less than one degree; (ii) when geological conditions are disregarded in the attenuation regression analysis, hazard pattern is similar to the one obtained for the case of hard soil everywhere.     

历史强震对渭河中游群发大型滑坡的诱发效应反演

以渭河中游地区为例,探索提出了开展历史地震对区域群发滑坡诱发效应反演研究的思路和方法。首先,基于汶川地震在渭河中游地区形成的高烈度异常和震害启示,通过区域活动构造和斜坡带断裂控滑分析,指出历史强震对区内群发大型滑坡的诱发效应不容忽视。然后,利用强震诱发滑坡的最远致灾震中距分析法,筛选出研究区周边300 km范围内需要重点考察其诱发效应的4次关键历史强震:公元前780年岐山MS7.0级地震、1654年天水南MS8.0级地震、1556年华县MS8.25级地震及1920年海原MS8.5级地震。随后,以岐山地震为例,具体阐述了基于Newmark位移模型的地震诱发滑坡位移及危险性反演评估方法;同时反演了其他3次历史强震诱发区内滑坡位移及危险性。最后,定量比较了反演历史强震诱发滑坡的位移与实际大型滑坡分布的空间匹配程度,结果显示天水南MS8.0级地震对渭河中游现存群发大型滑坡的诱发效应最强。     

Site-specific earthquake response study for hazard assessment in Kolkata city,India

The assessment of local site effects on seismic ground motions is of great importance in earthquake engineering practice. Several destructive earthquakes in the past have demonstrated that the amplification of ground motion and associated damage to structures due to local site conditions is a significant consideration in earthquake hazard analysis. A recent paper published in this journal highlights the hazard posed by earthquakes in the megacity of Kolkata in India due to its seismic and geological settings. The seismic hazard assessment study speculates that the deep alluvial deposit in the city may increase the seismic hazard probably due to the amplification of the seismic energies. This paper focuses on the seismic response studies of the various soil strata (i.e. for local subsurface conditions) obtained from various construction sites in the city for predicted earthquake. It is very well recognized that site response studies (a part of seismic microhazard zonation for urban areas) are the first step towards performance-based foundation design or seismic risk analysis and mitigation strategy. One of the problems for carrying out site-specific study in Kolkata is the lack of recorded strong motion data in the city. Hence, this paper outlines a methodology to carry out site-specific study, where no strong motion data or seismic data are available. The methodology uses wavelet-based spectrum compatibility approach to generate synthetic earthquake motions and equivalent linear method for seismic site response analysis. The Mega City of Kolkata has been considered to explain the methodology. Seismic hazard zonation map by the Bureau of Indian Standards classifies the City of Kolkata as moderate seismic zone (Zone III) with a zone factor 0.16. On the other hand, GSHAP(Global Seismic Hazard Assessment Program) map which is based on 10% probability of exceedance in 50 years specifies a maximum peak ground acceleration (PGA) of 1.6 m/s² (0.163 g) for this region. In the present study, the seismic response has been carried out based on GSHAP. The results of the analysis indicate the amplification of ground motion in the range of 4.46–4.82 with the fundamental period ranging from 0.81 to 1.17 s. Furthermore, the maximum spectral accelerations vary in the range of 0.78–0.95 g.     

Seismic hazard in the Sannio-Matese area of Italy

The assessment of seismic hazard at five selected sites in the Sannio-Matese region is based on the computer program SRAMSC. Owing to the extensive historical data base for the output parameter, the MSK intensiy is chosen. The seismicity model is made up of five narrow area seismic sources. Circular or elliptical macroseismic fields are assigned to individual sources. A generalized Kövesligethy equation is used for this purpose as the attenuation relationship. The study reveals similar and a rather high hazard at the sites at Benevento, Boiano, and Melfi, which are located in the zone of highest seismic activity. At the Pomigliano and Lucera sites, the assessed hazard is much lower.     

Doubtful Events Reported in Current Italian Earthquake Catalogues: The Medieval Earthquakes of Subiaco (Central Italy)

Within the framework of a study of the seismicity of the Aniene Valley (Central Italy), we analysed the medieval earthquakes of Subiaco (1216, 1227, 1299), the largest events reported for the area. Our main goal was to investigate some doubtful events reported in earthquake catalogues and, as such, currently utilised for seismic hazard estimates. A careful screening of the oldest available sources and their filiation pattern up to the present pointed out the uncertainty on the date and nature of these phenomena. A multidisciplinary approach based on the joint analysis of archaeological, geomorphologic and historical evidence allowed us to propose new interpretations concerning these events and their significance for the assessment of seismic hazard in the Aniene Valley. The main conclusion is that the dates of the 1216 and 1227 events are fairly unsupported. In particular, the 1216 earthquake could be dated back to between AD 1159 and 1181.     

Bayesian estimation of seismic hazard for two sites in Switzerland

Seismic hazard analysis is based on data and models, which both are imprecise and uncertain. Especially the interpretation of historical information into earthquake parameters, e.g. earthquake size and location, yields ambiguous and imprecise data. Models based on probability distributions have been developed in order to quantify and represent these uncertainties. Nevertheless, the majority of the procedures applied in seismic hazard assessment do not take into account these uncertainties, nor do they show the variance of the results. Therefore, a procedure based on Bayesian statistics was developed to estimate return periods for different ground motion intensities (MSK scale).Bayesian techniques provide a mathematical model to estimate the distribution of random variables in presence of uncertainties. The developed method estimates the probability distribution of the number of occurrences in a Poisson process described by the parameter . The input data are the historical occurrences of intensities for a particular site, represented by a discrete probability distribution for each earthquake. The calculation of these historical occurrences requires a careful preparation of all input parameters, i.e. a modelling of their uncertainties. The obtained results show that the variance of the recurrence rate is smaller in regions with higher seismic activity than in less active regions. It can also be demonstrated that long return periods cannot be estimated with confidence, because the time period of observation is too short. This indicates that the long return periods obtained by seismic source methods only reflects the delineated seismic sources and the chosen earthquake size distribution law.     

Earthquake scenarios: a practical way to handle alternative solutions to historical earthquakes and to increase the transparency of seismic hazard assessment

This study presents a way to handle historical earthquakes whose parameters are based on sparse documentary materials. It is recommended that discrete earthquake scenarios should be constructed in such cases. Scenarios are possible sets of parameters for a past earthquake, reconstructed on the basis of the macroseismic data available. A probability value is to be attached to each of them using expert judgment. This means that uncertainties associated with historical earthquakes become discrete instead of continuous. Assigning a probability value to each scenario and including alternative solutions in the catalogue makes decision-making more transparent. The current state of the art of the research on a given historical earthquake is documented. It is illustrated how seismic histories of a given place are altered when different scenarios of historical key earthquakes are taken into account. The seismic histories consequently have different probabilities. The choice of an appropriate seismic history could be governed by the need: For example, for a high-risk facility, the high-intensity histories have to be considered. Different earthquake scenarios included in the catalogue would permit to evaluate also the uncertainty of the activity rate and to construct the final logic tree.     

PSHA of Van province for performance assessment using spectrally matched strong ground motion records

Within the framework of the performance based earthquake engineering, site specific earthquake spectra for Van province has been obtained. It is noteworthy that, in probabilistic seismic hazard assessment, as a first stage data from geological studies and records from the instrumental period were compiled to make a seismic source characterization for the study region. The probabilistic seismic hazard curves were developed based on selected appropriate attenuation relationships, at rock sites, with a probability of exceedance 2, 10 and 50% in 50 yrs period. The obtained results are compared with the spectral responses proposed for seismic evaluation and retrofit of building structure in Turkish Earthquake Code (2007), section 7. The acceleration response spectrums obtained from probabilistic seismic hazard analysis are matched to adjust earthquake accelerograms recorded during the 2011 Van earthquakes by using SeismoMatch v2.0 software. The aim of this procedure is to obtain a set of reasonable earthquake input motions for the seismic evaluation of existing buildings.     

Seismic hazard map of Coimbatore using subsurface fault rupture

This study presents the future seismic hazard map of Coimbatore city, India, by considering rupture phenomenon. Seismotectonic map for Coimbatore has been generated using past earthquakes and seismic sources within 300 km radius around the city. The region experienced a largest earthquake of moment magnitude 6.3 in 1900. Available earthquakes are divided into two categories: one includes events having moment magnitude of 5.0 and above, i.e., damaging earthquakes in the region and the other includes the remaining, i.e., minor earthquakes. Subsurface rupture character of the region has been established by considering the damaging earthquakes and total length of seismic source. Magnitudes of each source are estimated by assuming the subsurface rupture length in terms of percentage of total length of sources and matched with reported earthquake. Estimated magnitudes match well with the reported earthquakes for a RLD of 5.2% of the total length of source. Zone of influence circles is also marked in the seismotectonic map by considering subsurface rupture length of fault associated with these earthquakes. As earthquakes relive strain energy that builds up on faults, it is assumed that all the earthquakes close to damaging earthquake have released the entire strain energy and it would take some time for the rebuilding of strain energy to cause a similar earthquake in the same location/fault. Area free from influence circles has potential for future earthquake, if there is seismogenic source and minor earthquake in the last 20 years. Based on this rupture phenomenon, eight probable locations have been identified and these locations might have the potential for the future earthquakes. Characteristic earthquake moment magnitude (M _w ) of 6.4 is estimated for the seismic study area considering seismic sources close to probable zones and 15% increased regional rupture character. The city is divided into several grid points at spacing of 0.01° and the peak ground acceleration (PGA) due to each probable earthquake is calculated at every grid point in city by using the regional attenuation model. The maximum of all these eight PGAs is taken for each grid point and the final PGA map is arrived. This map is compared to the PGA map developed based on the conventional deterministic seismic hazard analysis (DSHA) approach. The probable future rupture earthquakes gave less PGA than that of DSHA approach. The occurrence of any earthquake may be expected in near future in these eight zones, as these eight places have been experiencing minor earthquakes and are located in well-defined seismogenic sources.     

A reappraisal of the seismicity of the Maghreb countries — Algeria, Morocco, Tunisia

This paper reappraises the seismicity of Algeria and adjacent regions. It presents a general view of the geographical structure, the historical development of the seismological station network, some aspects of the effects of past destructive earthquakes, the state of knowledge of the seismicity and the seismic hazard and risk in the region under survey. Magnitude-frequency relationships for different parts of the region studied are presented as well as magnitude-intensity and intensity-attenuation relationships, semi-empirical formula. It also discusses the macroseismic information, the instrumental data and the social and economic implications of earthquakes in the Maghreb region.     

Assessment of seismic hazard and liquefaction potential of Gujarat based on probabilistic approaches

Gujarat is one of the fastest-growing states of India with high industrial activities coming up in major cities of the state. It is indispensable to analyse seismic hazard as the region is considered to be most seismically active in stable continental region of India. The Bhuj earthquake of 2001 has caused extensive damage in terms of causality and economic loss. In the present study, the seismic hazard of Gujarat evaluated using a probabilistic approach with the use of logic tree framework that minimizes the uncertainties in hazard assessment. The peak horizontal acceleration (PHA) and spectral acceleration (Sa) values were evaluated for 10 and 2?% probability of exceedance in 50?years. Two important geotechnical effects of earthquakes, site amplification and liquefaction, are also evaluated, considering site characterization based on site classes. The liquefaction return period for the entire state of Gujarat is evaluated using a performance-based approach. The maps of PHA and PGA values prepared in this study are very useful for seismic hazard mitigation of the region in future.