Self-Assembled Graphene/MWCNT Bilayers as Platinum-Free Counter Electrode in Dye-Sensitized Solar Cells

We describe the preparation and properties of bilayers of graphene- and multi-walled carbon nanotubes (MWCNTs) as an alternative to conventionally used platinum-based counter electrode for dye-sensitized solar cells (DSSC). The counter electrodes were prepared by a simple and easy-to-implement double self-assembly process. The preparation allows for controlling the surface roughness of electrode in a layer-by-layer deposition. Annealing under N₂ atmosphere improves the electrode's conductivity and the catalytic activity of graphene and MWCNTs to reduce the I₃⁻ species within the electrolyte of the DSSC. The performance of different counter-electrodes is compared for ZnO photoanode-based DSSCs. Bilayer electrodes show higher power conversion efficiencies than monolayer graphene electrodes or monolayer MWCNTs electrodes. The bilayer graphene (bottom)/MWCNTs (top) counter electrode-based DSSC exhibits a maximum power conversion efficiency of 4.1 % exceeding the efficiency of a reference DSSC with a thin film platinum counter electrode (efficiency of 3.4 %). In addition, the double self-assembled counter electrodes are mechanically stable, which enables their recycling for DSSCs fabrication without significant loss of the solar cell performance.     

Well‐Dispersed CoS Nanoparticles on a Functionalized Graphene Nanosheet Surface: A Counter Electrode of Dye‐Sensitized Solar Cells

With a facile electrophoretic deposition and chemical bath process, CoS nanoparticles have been uniformly dispersed on the surface of the functionalized graphene nanosheets (FGNS). The composite was employed as a counter electrode of dye‐sensitized solar cells (DSSCs), which yielded a power conversion efficiency of 5.54 %. It is found that this efficiency is higher than those of DSSCs based on the non‐uniform CoS nanoparticles on FGNS (4.45 %) and built on the naked CoS nanoparticles (4.79 %). The achieved efficiency of our cost‐effective DSSC is also comparable to that of noble metal Pt‐based DSSC (5.90 %). Our studies have revealed that both the exceptional electrical conductivity of the FGNS and the excellent catalytic activity of the CoS nanoparticles improve the conversion efficiency of the uniformly FGNS‐CoS composite counter electrode. The electrochemical impedance spectra, cyclic voltammetry, and Tafel polarization have evidenced the best catalytic activity and the fastest electron transport. Additionally, the dispersion condition of CoS nanoparticles on FGNS plays an important role for catalytic reduction of I₃^?.     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

Enhancement of the efficiency of dye-sensitized solar cell with multi-wall carbon nanotubes/polythiophene composite counter electrodes prepared by electrodeposition

For the purpose of increasing the energy conversion efficiency of dye-sensitized solar cells (DSSCs), multi-wall carbon nanotube (MWCNT)/polythiophene (PTh) composite film counter electrode has been fabricated by electrophoresis and cyclic voltammetry (CV) in sequence. The morphology and chemical structure have been characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), and Raman spectroscopy respectively. The overall energy conversion efficiency of the DSSC employing the MWCNT/PTh composite film has reached 4.72%, which is close to that of the DSSC with a platinum (Pt) counter electrode (5.68%). Compared with a standard DSSC with MWCNT counter electrode whose efficiency is 2.68%, the energy conversion efficiency has been increased by 76.12% for the DSSC with MWCNT/PTh counter electrode. These results indicate that the composite film with high conductivity, high active surface area, and good catalytic properties for I₃⁻ reduction can potentially be used as the counter electrode in a high-performance DSSC.     

Growth of aligned polypyrrole acicular nanorods and their application as Pt‐free semitransparent counter electrode in dye‐sensitized solar cell

Polypyrrole films on fluorine doped tin oxide (FTO)‐coated glass substrate were prepared in situ by placing FTO/glass substrates where pyrrole was polymerized by methyl orange‐ferric chloride complex. The atomic force microscopy image indicated growth of acicular nanorods of polypyrrole. These films exhibited catalytic activity towards I₃⁻/I⁻ redox couple and have been investigated for counter electrode application in dye‐sensitized solar cell (DSSC). The fabricated DSSC with N719 dye/TiO₂ as photoanode, and PPy/FTO as counter electrode shows ~1.7% efficiency.     

金属-有机框架薄膜衍生的CoSe2/N共掺杂碳膜作DSSC对电极

针对粉体MOF衍生材料存在制备工艺复杂、薄膜厚度难以控制等问题,我们通过液相外延分步生长法制备了一种金属有机框架薄膜(PIZA-1),然后以其作牺牲模板,在惰性氛围中制备了一种CoSe_2和N共掺杂的碳膜(CoSe_2/N-CF),并用作DSSC对电极,其具有制备简单、粘结力强、厚度可调等优势。系统表征了CoSe_2/N-CF形貌特点、结构性质及电化学性能,并深入研究了不同厚度薄膜、CoSe_2颗粒大小对DSSC的光伏性能的影响。结果表明,CoSe_2/N-CF-15电极具有优异的催化活性,所组装的DSSC获得了8.68%的光电转化效率(PCE),高于相同条件下Pt电极组装电池的PCE(7.97%)。     

Self-supported metal sulphide nanocrystals-assembled nanosheets on carbon paper as efficient counter electrodes for quantum-dot-sensitized solar cells

Developing efficient counter electrodes (CEs) and quantum dots made of earth-abundant and non-toxic elements is essential but still challenging for quantum dot-sensitized solar cells (QDSSCs). Here, we report a facile strategy to prepare self-supported and robust CoS₂ and NiS nanocrystals-assembled nanosheets directly grown on carbon paper (MSx NS@CP) as efficient counter electrodes for QDSSCs. Such CEs integrate the merits of fast electron transfer from interconnected conductive scaffold, efficient mass transfer from hierarchically vertical nanosheet on 3D open substrate, as well as abundant highly active catalytic sites from metal sulphide nanocrystal units. As a result, QDDSCs based on such CoS₂ NS@CP and NiS NS@CP CEs achieve a PCE of 8.88% and 7.53%, respectively. The detailed analyses suggest that CoS₂ NS@CP has the highest catalytic activity and shows the lowest charger transfer resistance, leading to the highest PCE. These findings may inspire the design and exploration of other self-supported efficient CEs by integrating highly active catalysts onto 3D conductive networks for efficient QDSSCs.     

MnWO4/生物质衍生碳纳米复合催化剂的制备及催化性能

通过共沉淀法合成了双金属氧化物MnWO₄镶嵌生物质衍生碳（MnWO₄/BC）纳米复合催化剂,并将其作为对电极（counter electrode,CE）催化剂组装了染料敏化太阳能电池（dye-sensitized solar cell,DSSC）,探究了MnWO₄/BC在非碘体系中的催化性能和光伏性能。结果表明：在铜氧化还原（Cu²⁺/Cu⁺）电对DSSC中获得的光电能量转换效率（power conversion efficiency,PCE）为3.57%（D35）和1.59%（Y123）,高于Pt电极的PCE（3.12%,1.16%）;50次连续循环伏安测试表明,MnWO₄/BC催化剂具有较好的电化学稳定性。     

Synthesis and characterization of organic dyes containing 4,5-diazafluorene as efficient sensitizers for dye-sensitized solar cells

Two dyes which are 4,5-diazafluoren-9-one-derived diimine ligands and their corresponding Ru(II) bipyridine complexes were synthesized. The structures of all compounds were determined by FTIR, UV–Vis, ¹H-NMR, ¹C-NMR, and MS spectroscopic data. The photovoltaic and electrochemical properties of these compounds were investigated and the applicability in DSSCs as photosensitizers was studied. The photovoltaic cell efficiencies (PCE) of the devices were 0.36–1.26% under simulated AM 1.5 solar irradiation of 100 mW/cm², and the highest open-circuit voltage (V_oc) reached 0.34 V. When comparing the photovoltaic performance of DSSC devices, efficiency increases L2 < L2-Ru < L1 < L1-Ru. The PCE value of 1.26% was obtained with a DSSC based on L1-Ru under AM irradiation (100 mW/cm²). DSSC based on L1-Ru produced efficiency of 1.26%, whereas DSSC-based L1 exhibited the device performance with efficiency of 0.84% under illumination. These results show that the availability of a π-conjugated bridge and a richer electron donor for photovoltaic performance of the DSSC provides increased efficiency.     

An Interconnected Ternary MIn2S4 (M=Fe,Co, Ni) Thiospinel Nanosheet Array: A Type of Efficient Platinum‐Free Counter Electrode for Dye‐Sensitized Solar Cells

The ternary iron‐group thiospinels of metal diindium sulfides (MIn₂S₄, M=Fe, Co, Ni) with a vertically aligned nanosheet array structure are fabricated through an in situ solvothermal method on F‐doped tin oxide (FTO) substrates, which are employed as one type of platinum (Pt)‐free counter electrodes (CEs) in structure‐dependent dye‐sensitized solar cells (DSSCs). A DSSC assembled with ternary CoIn₂S₄ CE achieves an photoelectric conversion efficiency (PCE) of 8.83 %, outperforming than that of FeIn₂S₄ (7.18 %) and NiIn₂S₄ (8.27 %) CEs under full sunlight illumination (100 mW cm⁻², AM 1.5 G), which is also comparable with that of the Pt CE (8.19 %). Putting aside that the interconnected nanosheet array provides fast electron transfer and electrolyte diffusion channels, the highest PCE of CoIn₂S₄ based DSSC results from its largest specific surface area (144.07 m² g⁻¹), providing abundant active sites and the largest electron injection efficiency from CE to electrolyte.     

An Interconnected Ternary MIn2S4 (M=Fe,Co, Ni) Thiospinel Nanosheet Array: A Type of Efficient Platinum-Free Counter Electrode for Dye-Sensitized Solar Cells

The ternary iron-group thiospinels of metal diindium sulfides (MIn₂S₄, M=Fe, Co, Ni) with a vertically aligned nanosheet array structure are fabricated through an in situ solvothermal method on F-doped tin oxide (FTO) substrates, which are employed as one type of platinum (Pt)-free counter electrodes (CEs) in structure-dependent dye-sensitized solar cells (DSSCs). A DSSC assembled with ternary CoIn₂S₄ CE achieves an photoelectric conversion efficiency (PCE) of 8.83 %, outperforming than that of FeIn₂S₄ (7.18 %) and NiIn₂S₄ (8.27 %) CEs under full sunlight illumination (100 mW cm⁻², AM 1.5 G), which is also comparable with that of the Pt CE (8.19 %). Putting aside that the interconnected nanosheet array provides fast electron transfer and electrolyte diffusion channels, the highest PCE of CoIn₂S₄ based DSSC results from its largest specific surface area (144.07 m² g⁻¹), providing abundant active sites and the largest electron injection efficiency from CE to electrolyte.     

介孔碳-碳纳米管-硫化铜复合材料对电极的制备及其在量子点敏化太阳能电池中的应用

首先研究了介孔碳(MC)、碳纳米管(CNT)和不同MC/CNT质量比(m_(MC)/m_(CNT))制备的MC-CNT二元复合材料对电极的光电转换效率(PCE),进一步加入预先水热合成的CuS纳米材料,制备出MC-CNT-CuS三元复合材料对电极,同时探讨了CuS添加量和膜厚对对电极PCE的影响。实验结果表明,当m_(MC)/m_(CNT)=3/2时,2种碳材料能最大程度地发挥协同作用,使电池性能最好,PCE达12.69%。再加入0.4 g CuS时PCE可进一步提高,且对电极印刷5层时最优,此时所组装的电池获得的PCE最高(13.18%)。     

Enhanced photovoltaic characterization and charge transport of TIO2 nanoparticles/nanotubes composite photoanode based on indigo carmine dye-sensitized solar cells

Dye-sensitized solar cells (DSSCs) have established themselves as an alternative to conventional solar cells owing to their remarkably high power conversion efficiency, longtime stability and low-cost production. DSSCs composed of a dyed oxide semiconductor photoanode, a redox electrolyte and a counter electrode. In these devices, conversion efficiency is achieved by ultra-fast injection of an electron from a photo excited dye into the conduction band of metal oxide followed by subsequent dye regeneration and holes transportation to the counter electrode. The energy conversion efficiency of DSSC is to be dependent on the morphology and structure of the dye adsorbed metal oxide photoanode. Worldwide considerable efforts of DSSCs have been invested in morphology control of photoanode film, synthesis of stable optical sensitizers and improved ionic conductivity electrolytes. In the present investigation, a new composite nano structured photoanodes were prepared using TiO₂ nano tubes (TNTs) with TiO₂ nano particles (TNPs). TNPs were synthesized by sol–gel method and TNTs were prepared through an alkali hydrothermal transformation. Working photoanodes were prepared using five pastes of TNTs concentrations of 0, 10, 50, 90, and 100 % with TNPs. The DSSCs were fabricated using Indigo carmine dye as photo sensitizer and PMII (1-propyl-3-methylimmidazolium iodide) ionic liquid as electrolyte. The counter electrode was prepared using Copper sulfide. The structure and morphology of TNPs and TNTs were characterized by X-ray diffraction and electron microscopes (TEM and SEM). The photocurrent efficiency is measured using a solar simulator (100 mW/cm²). The prepared composite TNTs/TNPs photoanode could significantly improve the efficiency of dye-sensitized solar cells owing to its synergic effects, i.e. effective dye adsorption mainly originated from TiO₂ nanoparticles and rapid electron transport in one-dimensional TiO₂ nanotubes. The results of the present investigation suggested that the DSSC based on 10 % TNTs/TNPs showed better photovoltaic performance than cell made pure TiO₂ nanoparticles. The highest energy-conversion efficiency of 2.80 % is achieved by composite TNTs (10 %)/TNPs film, which is 68 % higher than that pure TNPs film and far larger than that formed by bare TNTs film (94 %). The charge transport and charge recombination behaviors of DSSCs were investigated by electrochemical impedance spectra and the results showed that composite TNTs/TNPs film-based cell possessed the lowest transfer resistances and the longest electron lifetime. Hence, it could be concluded that the composite TNTs/TNPs photoanodes facilitate the charge transport and enhancing the efficiencies of DSSCs.     

Fabrication and Characterization of LaF3/Titania Nanotube Array Electrode for Determination of Fluoride Using a Headspace Single-Drop Microextraction System

LaF₃/titania nanotube array (TNAs) electrodes were fabricated by electrodeposition of LaF₃ on synthesized TNAs. The electrode was characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and energy dispersive X-ray spectrometer (EDS). The electrode exhibited excellent response to fluoride ion. The linear calibration range achieved four orders of magnitude of F^- concentration (10^?6–10^?2 mg/ml) and the sensitivity of the electrode is higher than that of ordinary fluoride ion selective electrodes (mode PF-1). The limit of detection (LOD) was estimated to be 4.39 × 10^?7 mg/ml (S/N = 3). The novel electrode was applied to the determination of trace fluoride ions in tap water and toothpaste. Finally, a headspace single-drop microextraction (SDME) system coupled with LaF₃/TNAs electrode was successfully applied to determine fluoride in milk samples. The results are satisfactory with an average relative standard deviation (RSD %) of 0.51% and recovery from 96.3% to 107.3%.     

A Novel Improved Method to Increase the Efficiency of Dye‐Sensitized Solar Cells

A novel improved method which employs a reflective mirror at the back of the Pt counter electrode is used in dye‐sensitized solar cells (DSSC). The direction of the light propagation in the cells was changed because of adding a mirror and the light reflected back into the DSSC in order to enhance the optical absorption of the DSSCs. Therefore, the performance of the cells was improved distinctively. The TiO₂ electrodes were characterized by X‐ray diffraction, scanning electron microscopy and I‐V properties of the cells measured by Linear Sweep Voltammetry system. The results indicates that the conversion efficiency can be increased from 4.81% to 5.43% under AM 1.5 illumination when a mirror is added at the back of the Pt counter electrode in the same cell. Meanwhile, the Jsc, Voc and the fill factor can be obtained 18.65 mA/cm², 0.728 V and 0.561, respectively.     

Quasi-solid-state dye-sensitized solar cells assembled with polymeric ionic liquid and poly(3,4-ethylenedioxythiophene) counter electrode

Poly(3,4-ethylenedioxythiophene) nanofibers (PEDOT-NF) with high catalytic activity were synthesized and employed as a counter electrode in dye-sensitized solar cells (DSSCs). A polymeric ionic liquid (PIL) was used as a gelling agent and an iodide source for making a highly conductive gel polymer electrolyte. A quasi-solid-state DSSC assembled with this PIL-based gel polymer electrolyte and PEDOT-NF counter electrode exhibited high conversion efficiency of 8.12% at 100 mW cm^− 2.     

A glassy carbon electrode modified with MoS<Subscript>2</Subscript> nanosheets and poly(3,4-ethylenedioxythiophene) for simultaneous electrochemical detection of ascorbic acid,dopamine and uric acid

We describe a chemical exfoliation method for the preparation of MoS₂ nanosheets. The nanosheets were incorporated into poly(3,4-ethylenedioxythiophene) (PEDOT) by electrodeposition on a glassy carbon electrode (GCE) to form a nanocomposite. The modified GCE is shown to enable simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). Due to the synergistic effect of MoS₂ and PEDOT, this electrode displays better properties in terms of electrocatalytic oxidation of AA, DA and UA than pure PEDOT, which is illustrated by cyclic voltammetry and differential pulse voltammetry (DPV). Under optimum conditions and at pH 7.4, the respective sensitivities and best working potentials are as follows: AA: 1.20 A?mM^?1?m^?2, 30 mV; DA: 36.40 A?mM^?1?m^?2, 210 mV; UA: 105.17 A?mM^?1?m^?2, 350 mV. The calculated detection limits for AA, DA and UA are 5.83 μM, 0.52 μM and 0.95 μM, respectively. The modified electrode was applied to the detection of the three species in human urine samples and gave satisfactory results.

Open image in new window

Graphical abstract MoS₂ nanosheets were prepared by a facile chemical exfoliation method. MoS₂ and poly(3,4-ethylenedioxythiophene) nanocomposite modified glassy carbon electrodes were fabricated, which are shown to enable simultaneous determination of ascorbic acid, dopamine and uric acid with high sensitivity and selectivity.

     

A new simple preparation of platinum-nickel alloy nanoparticles and their characterization as an electrocatalyst for methanol oxidation

Pt-Ni alloy nanoparticles were produced by casting 2 or 10 mM H₂PtCl₆ solutions on a Ni column. The apparent particle size for the resultant Pt-Ni alloys increased with the concentration of the H₂PtCl₆ solution, while the content of Pt in the alloy decreased. The potential sweeps of 5 cycles in an H₂SO₄ aqueous solution for Pt-Ni (2 mM)/Ni and Pt-Ni (10 mM)/Ni electrodes led to electrochemical behavior similar to a polycrystalline Pt electrode, suggesting the formation of a few thin Pt layers on each Pt-Ni alloy surface. In electrochemical measurements, both Pt-Ni/Ni electrodes showed more negative onset potential of methanol oxidation and slower degradation of oxidation current of methanol than the polycrystalline Pt electrode. X-ray photoelectron spectroscopy of both Pt-Ni/Ni electrodes showed the shift of Pt4f peaks to a higher binding energy, suggesting that the increase in the d vacancy in the balance band 5d orbital of Pt contributed to the improved electrocatalytic activity and durability of the Pt-Ni/Ni electrodes.     

Novel photosensitizer for dye-sensitized solar cell based on ionic liquid–doped blend polymer electrolyte

The existing energy situation demands not only the huge energy in a short time but also clean energy. In this regard, an integrated photo-supercapacitor device has been fabricated in which photoelectric conversion and energy storage are achieved simultaneously. A novel carbazole-based dye is synthesized and characterized for photosensitizer. The silver-doped titanium dioxide (Ag-TiO₂) is synthesized, and it is used as photoanode material. Different concentrations of tetrabutylammonium iodide (TBAI)-doped polyvinyl alcohol–polyvinylpyrrolidone (PVA-PVP) blend polymer electrolytes are prepared, and their conductivity and dielectric properties were studied. Reduced graphene oxide (r-GO) is synthesized by a one-pot synthesis method and confirmed using Raman spectroscopy for counter electrode material in dye-sensitized solar cell (DSSC) and supercapacitor electrodes. The DSSC having 4% Ag-TiO₂–based photoanode showed the highest efficiency of 1.06% (among r-GO counter electrodes) and 2.37% (among platinum counter electrodes). The supercapacitor before integration and after integration exhibits specific capacitance of 1.72 Fg⁻¹ and 1.327 Fg⁻¹, respectively.

Graphical Abstract

     

One-step hydrothermal synthesis of marigold flower-like nanostructured MoS<Subscript>2</Subscript> as a counter electrode for dye-sensitized solar cells

MoS₂ thin films with marigold flower-like nanostructures were grown on conductive fluorine-doped tin oxide (FTO) substrates through a one-step hydrothermal synthesis for their application as counter electrodes (CEs) in dye-sensitized solar cells (DSSCs). Different MoS₂ thin film samples (A–D) were grown on FTO slides using different concentrations of precursors (sodium molybdate and thioacetamide), while keeping the Mo/S molar ratio constant (1:4.6), in all samples. The effect of varying precursor concentrations (3.2–12.6 mM on MoS₂ basis) on the structure of the nanostructured thin films and their performance as DSSC-CEs was investigated. Scanning electron microscopy revealed a material with an infolded petal-like morphology. With increasing precursor concentration, the petal-like structures tended to form bunched nanostructures (100–300 nm) resembling marigold flowers. X-ray diffraction analysis, X-ray photoelectron, and Raman spectroscopy studies showed that the thin films were composed of hexagonal MoS₂ with good crystallinity. Hall effect measurements revealed MoS₂ to be a p-type semiconductor with a carrier mobility of 219.80 cm² V^?1 s^?1 at room temperature. The electrochemical properties of the thin films were examined using cyclic voltammetry and electrochemical impedance spectroscopy. The marigold flower-like MoS₂ thin films showed excellent electrocatalytic activity towards the I¯/I₃¯ reaction and low charge transfer resistance (R_ct) values of 14.77 Ω cm^?1, which was close to that of Pt electrode (12.30 Ω cm^?1). The maximum power conversion efficiency obtained with MoS₂ CE-based DSSCs was 6.32%, which was comparable to a Pt CE-based DSSC (6.38%) under one sun illumination. Similarly, the maximum incident photon-to-charge carrier efficiency exhibited by MoS₂ CE-based DSSCs was 65.84%, which was also comparable to a Pt CE-based DSSC (68.38%). The study demonstrated that the marigold flower-like nanostructured MoS₂ films are a promising alternative to the conventional Pt-based CEs in DSSCs.

Open image in new window

Graphical abstract ?