量子点敏化太阳能电池对电极研究进展

对电极(CE)是量子点敏化太阳能电池(QDSSCs)的重要组成部分之一,改进对电极的综合性能是提高QDSSCs能量转换效率(PCE)的有效手段。本文简要介绍了对电极应具备的性能,并按不同材料的使用,分类阐述了金属、导电聚合物、碳、无机金属化合物以及它们的复合材料对电极的制备方法和研究进展。其中,以铜、钴、铅的硫化物等为主的无机金属化合物对电极催化活性高,成本低,研究最为广泛;导电聚合物、新型碳材料以及各类复合材料对电极也因其各自的优势在量子点敏化太阳能电池中的研究越来越成熟。     

An Interconnected Ternary MIn2S4 (M=Fe,Co, Ni) Thiospinel Nanosheet Array: A Type of Efficient Platinum‐Free Counter Electrode for Dye‐Sensitized Solar Cells

The ternary iron‐group thiospinels of metal diindium sulfides (MIn₂S₄, M=Fe, Co, Ni) with a vertically aligned nanosheet array structure are fabricated through an in situ solvothermal method on F‐doped tin oxide (FTO) substrates, which are employed as one type of platinum (Pt)‐free counter electrodes (CEs) in structure‐dependent dye‐sensitized solar cells (DSSCs). A DSSC assembled with ternary CoIn₂S₄ CE achieves an photoelectric conversion efficiency (PCE) of 8.83 %, outperforming than that of FeIn₂S₄ (7.18 %) and NiIn₂S₄ (8.27 %) CEs under full sunlight illumination (100 mW cm⁻², AM 1.5 G), which is also comparable with that of the Pt CE (8.19 %). Putting aside that the interconnected nanosheet array provides fast electron transfer and electrolyte diffusion channels, the highest PCE of CoIn₂S₄ based DSSC results from its largest specific surface area (144.07 m² g⁻¹), providing abundant active sites and the largest electron injection efficiency from CE to electrolyte.     

An Interconnected Ternary MIn2S4 (M=Fe,Co, Ni) Thiospinel Nanosheet Array: A Type of Efficient Platinum-Free Counter Electrode for Dye-Sensitized Solar Cells

The ternary iron-group thiospinels of metal diindium sulfides (MIn₂S₄, M=Fe, Co, Ni) with a vertically aligned nanosheet array structure are fabricated through an in situ solvothermal method on F-doped tin oxide (FTO) substrates, which are employed as one type of platinum (Pt)-free counter electrodes (CEs) in structure-dependent dye-sensitized solar cells (DSSCs). A DSSC assembled with ternary CoIn₂S₄ CE achieves an photoelectric conversion efficiency (PCE) of 8.83 %, outperforming than that of FeIn₂S₄ (7.18 %) and NiIn₂S₄ (8.27 %) CEs under full sunlight illumination (100 mW cm⁻², AM 1.5 G), which is also comparable with that of the Pt CE (8.19 %). Putting aside that the interconnected nanosheet array provides fast electron transfer and electrolyte diffusion channels, the highest PCE of CoIn₂S₄ based DSSC results from its largest specific surface area (144.07 m² g⁻¹), providing abundant active sites and the largest electron injection efficiency from CE to electrolyte.     

High-performance Pt-NiO nanosheet-based counter electrodes for dye-sensitized solar cells

High-performance counter electrodes for dye-sensitized solar cells (DSSCs) are fabricated with platinum-nickel oxide (Pt-NiO) nanosheets as catalytic materials. Firstly, the Pt-Ni nanosheets are synthesized via galvanic replacement reaction between pre-synthesized Ni nanosheets and an aqueous H₂PtCl₆ solution. Secondly, after thermal treatment in air, the Pt-Ni alloys are turned to Pt-NiO nanosheets. The related data of cyclic voltammetry, electrochemical impedance spectroscopy, and Tafel polarization reveal that Pt-NiO counter electrodes show highly catalytic activity and low charge transfer resistance. The DSSC with Pt-NiO counter electrode exhibits power conversion efficiency (PCE) of 8.40 %, which is lower than that of the DSSC containing commercial available Pt counter electrode (9.15 %) under full sunlight illumination (100 mW cm^?2, AM1.5G). However, owing to the extremely high transparency of Pt-NiO counter electrode, when putting an Ag mirror behind the back side of the DSSC, the reflected light can bring great enhanced PCE (11.27 %).     

Enhanced Performance of Organic/Inorganic Hybrid Nanomaterials bearing Impregnated [PdL2] Complexes as Counter‐Electrode Catalyst for Dye‐Sensitized Solar Cells

N‐coordinate Pd²⁺ complexes [PdL₂] (L: N‐N‐quinoline‐8‐yl‐R‐benzenesulfonamides) ( 6–10 ) and [PdL₂] complexes assembled on multi‐wall carbon nanotubes (MWCNTs) hybrid nanomaterials were fabricated and characterized by various techniques. The [PdL₂] impregnated MWCNTs materials ( 11–15 ) were applied as a counter electrode (CE) catalyst for triiodide to iodide reduction reaction in the dye‐sensitized solar cells (DSSC) and investigated electro‐catalytic activities. The MWCNTs‐supported [PdL₂] CEs ( 11–15 ) are exhibits as Pt‐free CE with good power conversion efficiencies (PCEs), and compared to platinum and bare MWCNTs CEs and the PCE of bare MWCNTs was clearly improved by means of [PdL₂] complexes ( 6–10 ). The DSSCs based on the hybrid counter electrodes (CEs) ( 11–15 ) and bare MWCNTs are indicated a relative efficiency ( ? _rel ) of 64.27%, 54.07%, 53.75%, 51.52% 44.82% and 27.27% concerning a Pt CE control device set at 100%. The report emphasizes that [PdL₂] impregnated MWCNTs type counter electrodes (CEs) ( 11–15 ) are promising as effectively catalyst in working device design, particularly taking into account the eco‐friendly approach of the hybrids.     

Facile synthesis of NiS/graphene composite with high catalytic activity for high-efficiency dye-sensitized solar cells

Creation of low-cost and efficient counter electrodes (CEs) is important for developing cost-effective dye-sensitized solar cells (DSSCs). In this report, NiS/graphene (G) nanocomposites have been facilely synthesized by physically mixing NiS nanoparticles with G and used as CE in DSSC. The NiS/graphene nanocomposite integrates the high conductive ability of graphene and well electrocatalytic activity of NiS into a single CE material. By introducing graphene, the NiS nanoparticles are well dispersed on graphene sheets. The effect of graphene additive ratios on electrochemical and photovoltaic performance has been investigated. The resultant CEs follow an order of NiS-G0.6 > Pt > NiS-G0.8 > NiS-G0.4 > NiS-G0.2 > NiS > G. With an optimized weight ratio (1:0.6) of graphene to NiS (NiS-G0.6), a maximal power conversion efficiency of 8.18% was obtained, yielding 17.2% enhancement in comparison to the device with NiS CE.     

Unraveling the Interfacial Charge Migration Pathway at the Atomic Level in a Highly Efficient Z‐Scheme Photocatalyst

A highly efficient Z‐scheme photocatalytic system constructed with 1D CdS and 2D CoS₂ exhibited high photocatalytic hydrogen‐evolution activity of 5.54 mmol h^?1 g^?1 with an apparent quantum efficiency of 10.2 % at 420 nm. More importantly, its interfacial charge migration pathway was unraveled: The electrons are efficiently transferred from CdS to CoS₂ through a transition atomic layer connected by Co–S_5.8 coordination, thus resulting in more photogenerated carriers participating in surface reactions. Furthermore, the charge‐trapping and charge‐transfer processes were investigated by transient absorption spectroscopy, which gave an estimated charge‐separation yield of approximately 91.5 % and a charge‐separated‐state lifetime of approximately (5.2±0.5) ns in CdS/CoS₂. This study elucidates the key role of interfacial atomic layers in heterojunctions and will facilitate the development of more efficient Z‐scheme photocatalytic systems.     

Influence of highly efficient PbS counter electrode on photovoltaic performance of CdSe quantum dots-sensitized solar cells

PbS electrode with high catalytic activity to S_n ^2? reduction certificated by the measurements of electrochemical impedance spectroscopy and cyclic voltammetry was prepared by a simple method. The high catalytic activity makes it be a low-cost alternative counter electrode to platinum (Pt) to be used in quantum dots-sensitized solar cells (QDSSCs) based on polysulfide electrolyte. The photovoltaic performance enhancement of the quantum dots (QDs)-sensitized semiconductor thin films due to the PbS counter electrode was evaluated by fabricating QDSSCs based on CdSe QDs-sensitized ZnO (SnO₂) thin film. CdSe QDs-sensitized ZnO thin film has the lower internal total series resistance and electron transmission time, the higher electron lifetime and electron collection efficiency than the CdSe QDs-sensitized SnO₂ thin film. Replacing the Pt counter electrode with the PbS counter electrode leads to more improvement on the short circuit photocurrent density for QDSSC based on the ZnO thin film than the SnO₂ thin film. Therefore, the process to limit the photovoltaic performance of CdSe QDs-sensitized solar cell and the possible way to improve the photovoltaic performance were analyzed.     

介孔碳-碳纳米管-硫化铜复合材料对电极的制备及其在量子点敏化太阳能电池中的应用

首先研究了介孔碳(MC)、碳纳米管(CNT)和不同MC/CNT质量比(m_(MC)/m_(CNT))制备的MC-CNT二元复合材料对电极的光电转换效率(PCE),进一步加入预先水热合成的CuS纳米材料,制备出MC-CNT-CuS三元复合材料对电极,同时探讨了CuS添加量和膜厚对对电极PCE的影响。实验结果表明,当m_(MC)/m_(CNT)=3/2时,2种碳材料能最大程度地发挥协同作用,使电池性能最好,PCE达12.69%。再加入0.4 g CuS时PCE可进一步提高,且对电极印刷5层时最优,此时所组装的电池获得的PCE最高(13.18%)。     

SnS‐Quantum Dot Solar Cells Using Novel TiC Counter Electrode and Organic Redox Couples

Low‐cost quantum‐dot sensitized solar cells (QDSSCs) were fabricated by using the earth‐abundant element SnS quantum dot, novel TiC counter electrodes, and the organic disulfide/thiolate (T₂/T^?) redox couple, and reached an efficiency of 1.03 %. QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples were assembled to study the role of the redox couples in the regeneration of sensitizers. Charge‐extraction results reveal the reasons for the difference in J_SC in three QDSSCs based on I^?/I₃^?, T₂/T^?, and S^2?/S_x^2? redox couples. The catalytic selectivity of TiC and Pt towards T₂/T^? and I^?/I₃^? redox couples was investigated using Tafel polarization and electrochemical impedance analysis. These results indicated that Pt and TiC show a similar catalytic selectivity for I^?/I₃^?. However, TiC possesses better catalytic activity for T₂/T^? than for I^?/I₃^?. These results indicate the great potential of transition metal carbide materials and organic redox couples used in QDSSCs.     

CoS2 Nanoparticles Embedded in Covalent Organic Polymers as Efficient Electrocatalyst for Oxygen Evolution Reaction with Ultralow Overpotential

Cobalt disulfide (CoS₂) has been explored as attractive electrocatalyst for oxygen evolution reaction (OER). However, bulk CoS₂ sheets have limited catalytic activity due to low exposure of active sites. Herein, through an in-situ vulcanization approach, CoS₂ nanoparticles are embedded into bipyridine-containing covalent organic polymer (BP-COP). The as-prepared nanocomposite CoS₂@BP-COP exhibits high catalytic activity toward OER with an ultra-low overpotential of 270 mV (vs. RHE) at a current density of 10 mA cm⁻², a small Tafel slope of 36 mV dec⁻¹, and an excellent durability for 24 h without decay. The surface of CoS₂ is partially converted into CoOOH to form CoS₂/CoOOH as active sites under OER conditions. CoS₂@BP-COP displays superior OER catalytic activity to CoS₂ nanosheets and commercially available RuO₂ under the same conditions. The outstanding OER performance activity of CoS₂@BP-COP could be attributed to the uniform and small particle sizes of CoS₂/CoOOH distributed in BP-COP.     

Rational design of ternary NiS/CQDs/ZnIn2S4 nanocomposites as efficient noble-metal-free photocatalyst for hydrogen evolution under visible light

The NiS/CQDs nanocomposite (CQDs represents carbon quantum dots), with a mass ratio of NiS/CQDs to be 1.19:1 based on the ICP result, was obtained via a facile hydrothermal method from a mixture of CQDs, Ni(OAc)₂ and Na₂S. The self-assembly of ZnIn₂S₄ microspheres on the surface of NiS/CQDs was realized under microwave conditions to obtain a ternary NiS/CQDs/ZnIn₂S₄ nanocomposite. The as-obtained NiS/CQDs/ZnIn₂S₄ nanocomposite was fully characterized, and its photocatalytic hydrogen evolution under visible light irradiation was investigated. The ternary NiS/CQDs/ZnIn₂S₄ nanocomposite showed superior photocatalytic activity for hydrogen evolution than ternary CQDs/NiS/ZnIn₂S₄, which was obtained by deposition of NiS in the preformed CQDs/ZnIn₂S₄. The superior photocatalytic performance of ternary NiS/CQDs/ZnIn₂S₄ is ascribed to the introduction of CQDs, which act as a bridge to promote the vectorial transfer of photo-generated electrons from ZnIn₂S₄ to NiS. This result suggests that the rational design and fabrication of ternary CQDs-based systems are important for the efficient photocatalytic hydrogen evolution. This study provides a strategy for developing highly efficient noble-metal-free photocatalysts for hydrogen evolution using CQDs as a bridge to promote the charge transfer in the nanocomposite.     

硫化亚铜对电极在量子点敏化太阳电池中的应用

报道了一种基于硫族金属复合物N₄H₉Cu₇S₄前驱体溶液制备硫化亚铜对电极的新方法. 分别制备了TiO₂纳米颗粒多孔薄膜和TiO₂纳米棒阵列结构的光阳极, 并在此基础上研究了基于硫化亚铜对电极的CdS/CdSe量子点敏化太阳电池的光电性能, 同时结合电化学阻抗技术考察了硫化亚铜对电极的催化性能. 结果表明: 与铂电极相比, 本方法制备的硫化亚铜电极对多硫电解质具有更高的催化活性, 所组装的CdS/CdSe量子点敏化太阳电池具有更优的光伏性能.     

Highly Catalytic Carbon Nanotube/Pt Nanohybrid‐Based Transparent Counter Electrode for Efficient Dye‐Sensitized Solar Cells

Low‐cost transparent counter electrodes (CEs) for efficient dye‐sensitized solar cells (DSSCs) are prepared by using nanohybrids of carbon nanotube (CNT)‐supported platinum nanoparticles as highly active catalysts. The nanohybrids, synthesized by an ionic‐liquid‐assisted sonochemical method, are directly deposited on either rigid glass or flexible plastic substrates by a facile electrospray method for operation as CEs. Their electrochemical performances are examined by cyclic voltammetry, current density–voltage characteristics, and electrochemical impedance spectroscopy (EIS) measurements. The CNT/Pt hybrid films exhibit high electrocatalytic activity for I^?/I₃^? with a weak dependence on film thickness. A transparent CNT/Pt hybrid CE film about 100 nm thick with a transparency of about 70 % (at 550 nm) can result in a high power conversion efficiency (η) of over 8.5 %, which is comparable to that of pyrolysis platinum‐based DSSCs, but lower cost. Furthermore, DSSC based on flexible CNT/Pt hybrid CE using indium‐doped tin oxide‐coated polyethylene terephthalate as the substrate also exhibits η=8.43 % with J_sc=16.85 mA cm^?2, V_oc=780 mV, and FF=0.64, and this shows great potential in developing highly efficient flexible DSSCs.     

Transparent Metal Selenide Alloy Counter Electrodes for High‐Efficiency Bifacial Dye‐Sensitized Solar Cells

The exploration of cost‐effective and transparent counter electrodes (CEs) is a persistent objective in the development of bifacial dye‐sensitized solar cells (DSSCs). Transparent counter electrodes based on binary‐alloy metal selenides (M‐Se; M=Co, Ni, Cu, Fe, Ru) are now obtained by a mild, solution‐based method and employed in efficient bifacial DSSCs. Owing to superior charge‐transfer ability for the I^?/I₃^? redox couple, electrocatalytic activity toward I₃^? reduction, and optical transparency, the bifacial DSSCs with CEs consisting of a metal selenide alloy yield front and rear efficiencies of 8.30 % and 4.63 % for Co_0.85Se, 7.85 % and 4.37 % for Ni_0.85Se, 6.43 % and 4.24 % for Cu_0.50Se, 7.64 % and 5.05 % for FeSe, and 9.22 % and 5.90 % for Ru_0.33Se in comparison with 6.18 % and 3.56 % for a cell with an electrode based on pristine platinum, respectively. Moreover, fast activity onset, high multiple start/stop capability, and relatively good stability demonstrate that these new electrodes should find applications in solar panels.     

三种CuS对电极的制备及其对量子点敏化太阳能电池光电性能的影响

近几年,量子点敏化太阳能电池因其具有低成本、易合成、高的光电转换效率等优点而广受关注. 半导体金属硫化物具有良好的物理和化学性质,被广泛应用于各个领域,其中,铜硫化物凭借其优异的电化学催化活性,而成为量子点敏化太阳能电池良好的对电极材料. 本文通过3种不同的方法在FTO表面生长CuS纳米阵列（依次记为CuS-1、CuS-2、CuS-3）,并对样品进行晶相表征、表面形貌分析、电化学性能测试以及相应量子点敏化太阳能电池器件组装,最终发现CuS-3样品具有最优的光电性能.     

Electrophoretic Deposition of a Reduced Graphene–Au Nanoparticle Composite Film as Counter Electrode for CdS Quantum Dot‐Sensitized Solar Cells

A reduced graphene (RG)‐Au nanoparticle composite film is successfully fabricated by electrophoretic deposition and used as counter electrode for quantum dot‐sensitized solar cells. The RG‐Au composite is prepared by one‐step microwave‐assisted reduction of chloroaurate in alkaline solution with graphite oxide dispersion. Under one sun illumination (AM 1.5 G, 100 mW cm^?2), the cell with a RG‐Au counter electrode shows an energy conversion efficiency of 1.36 %, which is higher than those of cells employing conventional Pt or Au counter electrodes, due to the superior combination of highly catalytic Au nanoparticles and the conductive graphene network structure.     

Environmentally Benign and Efficient Ag2S‐ZnO Nanowires as Photoanodes for Solar Cells: Comparison with CdS‐ZnO Nanowires

In this work, we develop a low‐temperature, facile solution reaction route for the fabrication of quantum‐dot‐sensitized solar cells (QDSSCs) containing Ag₂S‐ZnO nanowires (NWs), simultaneously ensuring low manufacturing costs and environmental safety. For comparison, a CdS‐ZnO NW photoanode was also prepared using the layer‐by‐layer growth method. Ultraviolet photoelectron spectroscopy analysis revealed type‐II band alignments for the band structures of both photoanodes which facilitate electron transfer/collection. Compared to CdS‐ZnO QDSSCs, Ag₂S‐ZnO QDSSCs exhibit a considerably higher short‐circuit current density (J_sc) and a strongly enhanced light‐harvesting efficiency, but lower open‐circuit voltages (V_oc), resulting in almost the same power‐conversion efficiency of 1.2 %. Through this work, we demonstrate Ag₂S as an efficient quantum‐dot‐sensitizing material that has the potential to replace Cd‐based sensitizers for eco‐friendly applications.     

基于量子点涂料的柔性光阳极及碳基对电极的制备和优化

首先制备出量子点(QDs)/TiO_2涂料,分别采用丝网印刷法与刀刮法将涂料涂覆于ITO/PET柔性基底上,结果表明刀刮法制备量子点敏化太阳电池(QDSCs)效果更佳,且具有普适性。基于铜片对电极所组装的ZnCuInSe,CdSe和CdSeTe量子点半柔性QDSCs最高效率分别达2.83%,2.46%和1.99%。另外,我们对石墨纸进行表面化学修饰以提高亲水性,再通过简单的连续离子交换吸附法(SILAR)在石墨纸上负载Cu_xS纳米粒子,制备出Cu_xS/GP柔性对电极,进一步组装成全柔性QDSCs,获得了2.13%光电转化效率。     

基于量子点涂料的柔性光阳极及碳基对电极的制备和优化

首先制备出量子点（QDs）/TiO₂涂料,分别采用丝网印刷法与刀刮法将涂料涂覆于ITO/PET柔性基底上,结果表明刀刮法制备量子点敏化太阳电池（QDSCs）效果更佳,且具有普适性。基于铜片对电极所组装的ZnCuInSe,CdSe和CdSeTe量子点半柔性QDSCs最高效率分别达2.83%,2.46%和1.99%。另外,我们对石墨纸进行表面化学修饰以提高亲水性,再通过简单的连续离子交换吸附法（SILAR）在石墨纸上负载Cu_xS纳米粒子,制备出Cu_xS/GP柔性对电极,进一步组装成全柔性QDSCs,获得了2.13%光电转化效率。