CelloMOF: Nanocellulose Enabled 3D Printing of Metal–Organic Frameworks

3D printing is recognized as a powerful tool to develop complex geometries for a variety of materials including nanocellulose. Herein, a one‐pot synthesis of 3D printable hydrogel ink containing zeolitic imidazolate frameworks (ZIF‐8) anchored on anionic 2,2,6,6‐tetramethylpiperidine‐1‐oxylradical‐mediated oxidized cellulose nanofibers (TOCNF) is presented. The synthesis approach of ZIF‐8@TOCNF (CelloZIF8) hybrid inks is simple, fast (≈30 min), environmentally friendly, takes place at room temperature, and allows easy encapsulation of guest molecules such as curcumin. Shear thinning properties of the hybrid hydrogel inks facilitate the 3D printing of porous scaffolds with excellent shape fidelity. The scaffolds show pH controlled curcumin release. The synthesis route offers a general approach for metal–organic frameworks (MOF) processing and is successfully applied to other types of MOFs such as MIL‐100 (Fe) and other guest molecules as methylene blue. This study may open new venues for MOFs processing and its large‐scale applications.     

Mesoporous TiO2 nanofibers with controllable Au loadings for catalytic reduction of 4-nitrophenol

The Au/TiO₂ hybrid nanofibers composed of mesoporous TiO₂ nanofibers and Au nanoparticles were synchronously fabricated by integrating a facile electrospinning technique and subsequent annealing in air. The Au loading content in the hybrid nanofibers was regulated by varying the dosage of chlorauric acid added in the precursor solution. The compositions, microstructures and optical response properties of the Au/TiO₂ hybrid nanofibers were characterized. The UV–vis spectra of the as-prepared hybrid fibers reveal two absorption bands belonging to the band gap absorption of TiO₂ and the surface plasmon resonance (SPR) of Au nanoparticles. For the catalytic reduction of 4-nitrophenol to 4-aminophenol by sodium borohydride, the apparent reaction rate constant is raised but TOF value of the catalyst decreases, as the Au loading amount in the hybrid fibers increases. This is because the Au nanoparticles with smaller sizes have higher total surface areas at the same weight and therefore show higher catalytic activity. This method for producing Au/TiO₂ hybrid nanofibers is versatile and can be extended to the fabrication of other hybrid nanofibers composed of various noble metal nanoparticles and other mesoporous metal oxide nanofibers, designing of highly efficient catalysts for more important chemical reactions.     

Formation of Chiral Mesopores in Conducting Polymers by Chiral‐Lipid‐Ribbon Templating and “Seeding” Route

Conducting polymer nanofibers with controllable chiral mesopores in the size, the shape, and handedness have been synthesized by chiral lipid ribbon templating and “seeding” route. Chiral mesoporous conducting poly(pyrrole) (CMPP) synthesized with very small amount of chiral amphiphilic molecules (usually < 3%) has helically twisted channels with well‐defined controllable pore size of 5–20 nm in central axis of the twisted fibers. The structure and chirality of helical mesopores have been characterized by high‐resolution transmission electron microscope (HRTEM), scanning electron microscope (SEM) and electron tomography. The average pore diameters of chiral mesopores were approximately estimated from the N₂ adsorption–desorption data and calculated by the conversion calculation from helical ribbons to a rectangular straight tape. The pore size of CMPP has been controlled by choosing different alkyl chain lengths of chiral lipid molecules or precisely adjusting the H₂O/EtOH volume ratio.     

Aerosol‐Synthesis of Mesoporous Organosilica Nanoparticles with Highly Reactive,Superacidic Surfaces Comprising Sulfonic Acid Entities

Combining high internal surface area with tailor‐made surface properties is pivotal for granting advanced functional properties in many areas like heterogeneous catalysis, electrode materials, membranes, or also biomimetics. In this respect, organic‐inorganic hybrid nanostructures and in particular mesoporous organosilica materials are ideal systems. Here, the preparation of mesoporous solids via a new sol–gel building block comprising sulfonic acid (R‐SO₃H) is described. The degree of organic modification is not only maximal (100%), it is also proven that the novel material exhibits superacid properties. Furthermore, an aerosol assisted method is applied for generating this material in the form of mesoporous, spherical nanoparticles with substantial colloidal stability. Highly acidic, high surface area materials, like prepared here, are promising candidates for numerous future applications like in heterogeneous catalysis or for proton conducting membranes. However, first experiments addressing the antibacterial effect of the sulfonic‐acid, mesoporous organosilica materials are shown. It is demonstrated that the superacid character is required for exhibiting sufficient antifouling activity.     

Organosilica Materials with Bridging Phenyl Derivatives Incorporated into the Surfaces of Mesoporous Solids

An interesting class of materials is mesoporous organosilica materials containing a bridging, organic group along the pore‐surface. Such materials are prepared from silsesquioxane precursors of the type (R′O)₃Si‐R‐Si(OR′)₃ where R is the bridging organic group of interest, in combination with a lyotropic phase as a template for the generation of the pores. A new silsesquioxane precursor, 1,3‐bis‐(trialkoxysilyl)‐5‐bromobenzene, and the related mesoporous organosilica material containing bromobenzene groups located at the pore walls are presented in the current publication. The latter precursor allows access to the derivatization reactions known for halogenated aromatic compounds. Materials containing phenyl derivatives can be obtained either by chemical modifications starting from the mentioned precursor on the molecular scale, or the modifications can be performed directly at the surfaces of the porous material. Materials with surfaces containing benzoic acid, styrene, and phenylphosphonic acid are described.     

Synthesis–Structure–Property Relationships for Hyperbranched Aminosilica CO2 Adsorbents

Hyperbranched aminosilica (HAS) adsorbents are prepared via the ring‐opening polymerization of aziridine in the presence of mesoporous silica SBA‐15 support. The aminopolymers are covalently bound to the silica support and capture CO₂ reversibly in a temperature swing process. Here, a range of HAS materials are prepared with different organic loadings. The effects of organic loading on the structural properties and CO₂ adsorption properties of the resultant hybrid materials are examined. The residual porosity in the HAS adsorbents after organic loading, as well as the molecular weights and degrees of branching for the separated aminopolymers, are determined to draw a relationship between adsorbent structure and performance. Humid adsorption working capacities and apparent adsorption kinetics are determined from experiments in a packed‐bed flow system monitored by mass spectrometry. Dry adsorption isotherms are presented for one HAS adsorbent with a high amine loading at 35 and 75 °C. These combined results establish the relationships between adsorbent synthesis, structure, and CO₂ adsorption properties of the family of HAS materials.     

Formation of Gold and Silver Nanoparticle Arrays and Thin Shells on Mesostructured Silica Nanofibers

Mesostructured silica nanofibers synthesized in high yields with cetyltrimethylammonium bromide as the structure‐directing agent in HBr solutions are used as templates for the assembly of Au and Ag nanoparticles and the formation of thin Au shells along the fiber axis. Presynthesized spherical Au and Ag nanoparticles are adsorbed in varying amounts onto the silica nanofibers through bifunctional linking molecules. Nonspherical Au nanoparticles with sharp tips are synthesized on the nanofibers through a seed‐mediated growth approach. The number density of nonspherical Au nanoparticles is controlled by varying the amount of seeded nanofibers relative to the amount of supplied Au precursor. This seed‐mediated growth is further used to form continuous Au shells around the silica nanofibers. Both the Au‐ and Ag‐nanoparticle/silica‐nanofiber hybrid nanostructures and silica/Au core/shell fibers exhibit extinction spectra that are distinct from the spectra of Au and Ag nanoparticles in solution, indicating the presence of new surface plasmon resonance modes in the silica/Au core/shell fibers and surface plasmon coupling between closely spaced metal nanoparticles assembled on silica nanofibers. Spherical Au‐ and Ag‐nanoparticle/silica‐nanofiber hybrid nanostructures are further used as substrates for surface‐enhanced Raman spectroscopy, and the enhancement factors of the Raman signals obtained on the Ag‐nanoparticle/silica‐nanofiber hybrid nanostructures are 2 × 10⁵ for 4‐mercaptobenzoic acid and 4‐mercaptophenol and 7 × 10⁷ for rhodamine B isothiocyanate. These hybrid nanostructures are therefore potentially useful for ultrasensitive chemical and biological sensing by using molecular vibrational signatures.     

Green‐Chemical Synthesis of Ultrathin β‐MnOOH Nanofibers for Separation Membranes

Ultrathin β‐MnOOH nanofibers can be produced on a large scale via a green‐chemical method using an aqueous solution of very dilute Mn(NO₃)₂ and aminoethanol at room temperature. High‐magnification electron microscopy demonstrates that the β‐MnOOH nanofibers are 3–5 nm thin and up to 1 micrometer long and the nanofibers are parallel assembled into bundles with an average diameter of 25 nm. By a filtration process, ultrathin mesoporous membranes with strong mechanical, thermal, and chemical stabilities are prepared from the β‐MnOOH nanofiber bundles. The membranes can separate 10‐nm nanoparticles from water at a flux of 15120 L m^?2·h^?1·bar^?1, which was 2–3 times higher than that of commercial membranes with similar rejection properties. Based on the Young‐Laplace equation, β‐MnOOH nanofiber/polydimethylsiloxane composite membranes are developed through a novel downstream‐side evaporation process. From nanoporous to dense separation membranes can be achieved by optimizing the experimental conditions. The membranes show desirable separation performance for proteins, ethanol/water mixtures, and gases. The synthesis method of β‐MnOOH nanofibers is simple and environmentally friendly, and it is easily scalable for industry and applicable to other metal oxide systems. These composite membranes constitute a significant contribution to advanced separation technology.     

Poly(3‐hexylthiophene) Fibers for Photovoltaic Applications

A new method for the preparation of active layers of polymeric solar cells without the need for thermal post‐treatment to obtain optimal performance is presented. Poly(3‐hexylthiophene) (P3HT) nanofibers are obtained in highly concentrated solutions, which enables the fabrication of nanostructured films on various substrates. Here, the preparation of these fibers along with their characterization in solution and in the solid state is detailed. By mixing these nanofibers with a molecular acceptor such as [6,6]‐phenyl C₆₁‐butyric acid methyl ester (PCBM) in solution, it is possible to obtain in a simple process a highly efficient active layer for organic solar cells with a demonstrated power conversion efficiency (PCE) of up to 3.6 %. The compatibility of the room‐temperature process developed herein with commonly used plastic substrates may lead to applications such as the development of large‐area flexible solar cells.     

Hybrid Periodic Mesoporous Organosilicas

In this study we report the synthesis of a new class of materials called hybrid periodic mesoporous organosilicas (HPMOs). By coupling a silsesquioxane precursor through at least two chemical linkages to the mesopore walls of a pre‐existing periodic mesoporous silica (PMS) or periodic mesoporous organosilica (PMO). Many of the problems of a conventional PMO material can be avoided while ensuring efficient use of the bridging organic functional groups of the silsesquioxane. We demonstrate this concept for PMS by anchoring various silsesquioxanes, such as ethene and ethane silsesquioxanes, to the mesopore walls of the PMS. The addition of anchored silsesquioxane monolayers and multilayers to the mesopore walls also allows for the strict control of the diameter of the mesopore as well as the mesopore wall thickness in the final HPMO material. Additionally it is shown that having the silsesquioxane located solely on the surface of the mesopores in HPMOs gives increased chemical accessibility of the organic bridge‐bonded moiety when compared with their PMO counterparts containing the bridge‐bonded organic both on the surface and within the pore walls.     

From Melamine‐Cyanuric Acid Supramolecular Aggregates to Carbon Nitride Hollow Spheres

Graphitic carbon nitride (g‐CN) is a promising heterogeneous metal‐free catalyst for organic photosynthesis, solar energy conversion, and photodegradation of pollutants. Its catalytic performance is easily adjustable by modifying texture, optical, and electronic properties via nanocasting, doping, and copolymerization. However, simultaneous optimization has yet to be achieved. Here, a facile synthesis of mesoporous g‐CN using molecular cooperative assembly between triazine molecules is reported. Flower‐like, layered spherical aggregates of melamine cyanuric acid complex (MCA) are formed by precipitation from equimolecular mixtures in dimethyl sulfoxide (DMSO). Thermal polycondensation of MCA under nitrogen at 550 °C produces mesoporous hollow spheres comprised of tri‐s‐triazine based g‐CN nanosheets (MCA‐CN) with the composition of C₃N_4.14H_1.98. The layered structure succeeded from MCA induces stronger optical absorption, widens the bandgap by 0.16 eV, and increases the lifetime of photoexcited charge carriers by twice compared to that of the bulk g‐CN, while the chemical structure remains similar to that of the bulk g‐CN. As a result of these simultaneous modifications, the photodegradation kinetics of rhodamine B on the catalyst surface can be improved by 10 times.     

Transparent Mesoporous Nanocomposite Films for Self‐Cleaning Applications

A versatile approach is studied for the elaboration of TiO₂ based photocatalytic coatings for self‐cleaning applications on transparent substrates. The basic principle of the synthesis relies on the use of preformed TiO₂ colloidal particles that are further dispersed within a transparent silica binder with a mesoporous structure. Film porosity in the nanometer range is controlled by achieving the sol–gel silica condensation around self‐organized micellar assemblies of a templating copolymer surfactant. The latter also acts as a stabilizer for the TiO₂ particles, thus preserving their high dispersion within the film so that excellent optical properties are maintained even for high TiO₂ loading (up to 50 %). Studies of photodegradation kinetics show that such mesoporous films are at least 15 times more active than films synthesized with a usual microporous silica binder. Moreover, the measured quantum‐yield efficiency (1.1 %) is found to be among the highest reported up to now. Improved photoactivity of the films is discussed as resulting from the closer proximity between the organic molecules and the surface of the TiO₂ crystallites as well as the improved diffusion rate of water and oxygen through the interconnected pore network.     

Synthesis of Semiconducting Functional Materials in Solution: From II‐VI Semiconductor to Inorganic–Organic Hybrid Semiconductor Nanomaterials

This Feature Article provides a brief overview of the latest development and emerging new synthesis solution strategies for II–VI semiconducting nanomaterials and inorganic‐organic semiconductor hybrid materials. Research on the synthesis of II–VI semiconductor nanomaterials and inorganic–organic hybrid semiconducting materials via solution strategies has made great progress in the past few years. A variety of II–VI semiconductor and a new family of [MQ(L)_0.5] (M = Mn, Zn, Cd; Q = S, Se, Te; L = diamine, deta) hybrid nanostructures can be generated using solution synthetic routes. Recent advances have demonstrated that the solution strategies in pure solvent and a mixed solvent can not only determine the crystal size, shape, composition, structure and assembly properties, but also the crystallization pathway, and act as a matrix for the formation of a variety of different II–VI semiconductor and hybrid nanocomposites with diverse morphologies. These II–VI semiconductor nanostructures and their hybrid nanocomposites display obvious quantum size effects, unique and tunable optical properties.     

Synthesis of Inorganic and Organic–Inorganic Hybrid Hollow Particles Using a Cationic Surfactant with a Partially Fluorinated Tail

A new partially fluorinated cationic surfactant, 1‐(10‐perfluorooctyldecyl)pyridinium bromide monohydrate, is synthesized and used as the template for mesoporous ceramic and inorganic–organic hybrid particles. Several hydrolyzed alkoxide precursors are shown to co‐assemble with this surfactant to form hollow vesicle‐like particles, and the effect of changing the alkoxide chemical structure on the formation of these particles is examined. Tetramethoxysilane produces cubic or columnar particles without hollow cavities, but all other tetra‐n‐alkoxysilanes tested up to the n‐butoxide produce hollow particles. As the alkoxide length increases, the shell structure changes from multilayered (with Si(OC₂H₅)₄) to a single thin layer (with Si(OC₃H₇)₄) to a single thick layer (with Si(OC₄H₉)₄). The stability of the fluorocarbon bilayers allows similar vesicular structures to be obtained in organic–inorganic hybrids prepared with bridged alkoxysilanes. Ethylene‐bridged silanes display similar structures to tetraalkoxysilanes. However, the hollow structures appear to partially collapse when the bridging chain is too long (octylene) and no hollow particles are formed with bis(trialkoxysilylpropyl)amines.     

Bimetal–Organic Framework: One‐Step Homogenous Formation and its Derived Mesoporous Ternary Metal Oxide Nanorod for High‐Capacity,High‐Rate,and Long‐Cycle‐Life Lithium Storage

Metal–organic frameworks (MOFs) and relative structures with uniform micro/mesoporous structures have shown important applications in various fields. This paper reports the synthesis of unprecedented mesoporous Ni_xCo_3?xO₄ nanorods with tuned composition from the Co/Ni bimetallic MOF precursor. The Co/Ni‐MOFs are prepared by a one‐step facile microwave‐assisted solvothermal method rather than surface metallic cation exchange on the preformed one‐metal MOF template, therefore displaying very uniform distribution of two species and high structural integrity. The obtained mesoporous Ni_0.3Co_2.7O₄ nanorod delivers a larger‐than‐theoretical reversible capacity of 1410 mAh g^?1 after 200 repetitive cycles at a small current of 100 mA g^?1 with an excellent high‐rate capability for lithium‐ion batteries. Large reversible capacities of 812 and 656 mAh g^?1 can also be retained after 500 cycles at large currents of 2 and 5 A g^?1, respectively. These outstanding electrochemical performances of the ternary metal oxide have been mainly attributed to its interconnected nanoparticle‐integrated mesoporous nanorod structure and the synergistic effect of two active metal oxide components.     

Fluidic Processing of High‐Performance ZIF‐8 Membranes on Polymeric Hollow Fibers: Mechanistic Insights and Microstructure Control

Recently, a methodology for fabricating polycrystalline metal‐organic framework (MOF) membranes has been introduced – referred to as interfacial microfluidic membrane processing – which allows parallelizable fabrication of MOF membranes inside polymeric hollow fibers of microscopic diameter. Such hollow fiber membranes, when bundled together into modules, are an attractive way to scale molecular sieving membranes. The understanding and engineering of fluidic processing techniques for MOF membrane fabrication are in their infancy. Here, a detailed mechanistic understanding of MOF (ZIF‐8) membrane growth under microfluidic conditions in polyamide‐imide hollow fibers is reported, without any intermediate steps (such as seeding or surface modification) or post‐synthesis treatments. A key finding is that interfacial membrane formation in the hollow fiber occurs via an initial formation of two distinct layers and the subsequent rearrangement into a single layer. This understanding is used to show how nonisothermal processing allows fabrication of thinner (5 μm) ZIF‐8 films for higher throughput, and furthermore how engineering the polymeric hollow fiber support microstructure allows control of defects in the ZIF‐8 membranes. The performance of these engineered ZIF‐8 membranes is then characterized, which have H₂/C₃H₈ and C₃H₆/C₃H₈ mixture separation factors as high as 2018 and 65, respectively, and C₃H₆ permeances as high as 66 GPU.     

Self‐Sacrifice Template Fabrication of Hierarchical Mesoporous Bi‐Component‐Active ZnO/ZnFe2O4 Sub‐Microcubes as Superior Anode Towards High‐Performance Lithium‐Ion Battery

In the work, a facile yet efficient self‐sacrifice strategy is smartly developed to scalably fabricate hierarchical mesoporous bi‐component‐active ZnO/ZnFe₂O₄ (ZZFO) sub‐microcubes (SMCs) by calcination of single‐resource Prussian blue analogue of Zn₃[Fe(CN)₆]₂ cubes. The hybrid ZZFO SCMs are homogeneously constructed from well‐dispersed nanocrstalline ZnO and ZnFe₂O₄ (ZFO) subunites at the nanoscale. After selectively etching of ZnO nanodomains from the hybrid, porously assembled ZFO SMCs with integrate architecture are obtained accordingly. When evaluated as anodes for LIBs, both hybrid ZZFO and ZFO samples exhibit appealing electrochemical performance. However, the as‐synthesized ZZFO SMCs demonstrate even better electrochemical Li‐storage performance, including even larger initial discharge capacity and reversible capacity, higher rate behavior and better cycling performance, particularly at high rates, compared with the single ZFO, which should be attributed to its unique microstructure characteristics and striking synergistic effect between the bi‐component‐active, well‐dispersed ZnO and ZFO nanophases. Of great significance, light is shed upon the insights into the correlation between the electrochemical Li‐storage property and the structure/component of the hybrid ZZFO SMCs, thus, it is strongly envisioned that the elegant design concept of the hybrid holds great promise for the efficient synthesis of advanced yet low‐cost anodes for next‐generation rechargeable Li‐ion batteries.     

Spin‐Coated Periodic Mesoporous Organosilica Thin Films—Towards a New Generation of Low‐Dielectric‐Constant Materials

Periodic mesoporous organosilica (PMO) thin films have been produced using an evaporation‐induced self‐assembly (EISA) spin‐coating procedure and a cationic surfactant template. The precursors are silsesquioxanes of the type (C₂H₅O)₃Si–R–Si(OC₂H₅)₃ or R′–[Si(OC₂H₅)₃]₃ with R = methene (–CH₂–), ethylene (–C₂H₂–), ethene (–C₂H₄–), 1,4‐phenylene (C₆H₄), and R′ = 1,3,5‐phenylene (C₆H₃). The surfactant is successfully removed by solvent extraction or calcination without any significant Si–C bond cleavage of the organic bridging groups R and R′ within the channel walls. The materials have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X‐ray diffraction (PXRD), and ²⁹Si and ¹³C magic‐angle spinning (MAS) NMR spectroscopy. The d‐spacing of the PMOs is found to be a function of R. Nanoindentation measurements reveal increased mechanical strength and stiffness for the PMOs with R = CH₂ and C₂H₄ compared to silica. Films with different organic‐group content have been prepared using mixtures of silsesquioxane and tetramethylorthosilicate (TMOS) precursors. The dielectric constant (k) is found to decrease with organic content, and values as low as 1.8 have been measured for films thermally treated to cause a “self‐hydrophobizing” bridging‐to‐terminal transformation of the methene to methyl groups with concomitant loss of silanols. Increasing the organic content and thermal treatment also increases the resistance to moisture adsorption in 60 and 80 %‐relative‐humidity (RH) environments. Methene PMO films treated at 500 °C are found to be practically unchanged after five days exposure to 80 % RH. These low dielectric constants, plus the good thermal and mechanical stability and the hydrophobicity suggest the potential utility of these films as low‐k layers in microelectronics.     

In Situ Growth of Mesoporous SnO2 on Multiwalled Carbon Nanotubes: A Novel Composite with Porous‐Tube Structure as Anode for Lithium Batteries

A novel mesoporous‐nanotube hybrid composite, namely mesoporous tin dioxide (SnO₂) overlaying on the surface of multiwalled carbon nanotubes (MWCNTs), was prepared by a simple method that included in situ growth of mesoporous SnO₂ on the surface of MWCNTs through hydrothermal method utilizing Cetyltrimethylammonium bromide (CTAB) as structure‐directing agents. Nitrogen adsorption–desorption, X‐ray diffraction and transmission electron microscopy analysis techniques were used to characterize the samples. It was observed that a thin layer tetragonal SnO₂ with a disordered porous was embedded on the surface of MWCNTs, which resulted in the formation of a novel mesoporous‐nanotube hybrid composite. On the base of TEM analysis of products from controlled experiment, a possible mechanism was proposed to explain the formation of the mesoporous‐nanotube structure. The electrochemical properties of the samples as anode materials for lithium batteries were studied by cyclic voltammograms and Galvanostatic method. Results showed that the mesoporous‐tube hybrid composites displayed higher capacity and better cycle performance in comparison with the mesoporous tin dioxide. It was concluded that such a large improvement of electrochemical performance within the hybrid composites may in general be related to mesoporous‐tube structure that possess properties such as one‐dimensional hollow structure, high‐strength with flexibility, excellent electric conductivity and large surface area.