Ni3S2-MoSx nanorods grown on Ni foam as high-efficient electrocatalysts for overall water splitting

In order to solve the problem of large overpotential in water electrolysis for hydrogen production, transition metal sulfides are promising bifunctional electrocatalysts for hydrogen evolution reaction/oxygen evolution reaction that can significantly reduce overpotential. In this work, Ni₃S₂ and amorphous MoS_x nanorods directly grown on Ni foam (Ni₃S₂-MoS_x/NF) were prepared via one-step solvothermal process, which were used as a high-efficient electrocatalyst for overall water splitting. The Ni₃S₂-MoS_x/NF composite exhibits very low overpotentials of 65 and 312 mV to reach 10 mA cm⁻² and 50 mA cm⁻² in 1.0 M KOH for HER and OER, respectively. Besides, it exhibits a low Tafel slope (81 mV dec⁻¹ for HER, 103 mV dec⁻¹ for OER), high exchange current density (1.51 mA cm⁻² for HER, 0.26 mA cm⁻² for OER), and remarkable long-term cycle stability. This work provides new perspective for further the development of highly effective non-noble-metal materials in the energy field.     

One-pot preparation of Ni3S2@3-D graphene free-standing electrode by simple Q-CVD method for efficient oxygen evolution reaction

Efficient non-noble metal catalysts for the oxygen evolution reaction (OER) are particularly important in the practical applications of electrocatalytic water splitting (ECWS). Herein, based on a simple quasi chemical vapor deposition (Q-CVD) method, we fabricate a newly Ni₃S₂@3-D graphene free-standing electrode for efficient OER applications. The Ni₃S₂@3-D graphene integrates the advantageous features of 3-D graphene and Ni₃S₂ towards OER, such as more interfacial catalytic sites, pore-rich structure, N-doped structure and good electrical conductivity. Benefiting from the favorable features, the Ni₃S₂@3-D graphene (especially 900 °C sample) exhibits excellent OER performances in alkaline medium, which includes a low on-set potential (1.53 V), low overpotential of 305 mV at a current density of 10 mA cm⁻², and a smaller Tafel slope (50 mV dec⁻¹). This catalyst also shows ultrahigh stability after chronoamperometry response at 10 mA cm⁻² for 48 h with 30% increase in the current density. The present work opens a new approach for the one-pot construction of hybrid materials between metal sulfide and graphene to increase the electrocatalytic activity of non-noble metal OER catalysts.     

Ni3S2@Co(OH)2 heterostructures grown on Ni foam as an efficient electrocatalyst for water oxidation

It is of high significance to design robust, low-cost and stable electrocatalysts for the oxygen evolution reaction (OER) under alkaline medium. In this communication, we present the exploitation of Ni₃S₂@Co(OH)₂ which directly grown on nickel foam (Ni₃S₂@Co(OH)₂/NF) as a robust and stable electrocatalyst for OER. Such Ni₃S₂@Co(OH)₂/NF-5h demanding overpotential of only 290 mV is less than that of Ni₃S₂@Co(OH)₂/NF-10h (310 mV), Ni₃S₂@Co(OH)₂/NF-2h (320 mV) and Ni₃S₂/NF(350 mV), respectively, to drive a geometrical catalytic current density of 35 mA cm⁻², which is also better than that of noble metal catalyst IrO₂/NF (320 mV). In addition, the Ni₃S₂@Co(OH)₂/NF-5h presents a superior long-term electrocatalytic stability, keeping its activity at 26 mA cm⁻² for 40 h.     

Porous NiFe alloys synthesized via freeze casting as bifunctional electrocatalysts for oxygen and hydrogen evolution reaction

Binder-free NiFe-based electrocatalyst with aligned pore channels has been prepared by freeze casting and served as a bifunctional catalytic electrode for oxygen and hydrogen evolution reaction (OER and HER). The synergistic effects between Ni and Fe result in the high electrocatalytic performance of porous NiFe electrodes. In 1.0 M KOH, porous Ni₇Fe₃ attains 100 mA cm⁻² at an overpotential of 388 mV with a Tafel slope of 35.8 mV dec⁻¹ for OER, and porous Ni₉Fe₁ exhibits a low overpotential of 347 mV at 100 mA cm⁻² with a Tafel slope of 121.0 mV dec⁻¹ for HER. The Ni₉Fe₁//Ni₉Fe₁ requires a low cell voltage of 1.69 V to deliver 10 mA cm⁻² current density for overall water splitting. The excellent durability at a high current density of porous NiFe electrodes has been confirmed during OER, HER and overall water splitting. The fine electrocatalytic performances of the porous NiFe-based electrodes owing to the three-dimensionally well-connected scaffolds, aligned pore channels, and bimetallic synergy, offering excellent charge/ion transfer efficiency and sizeable active surface area. Freeze casting can be applied to design and synthesize various three-dimensionally porous non-precious metal-based electrocatalysts with controllable multiphase for energy conversion and storage.     

A nano-spherical structure Ni3S2/Ni(OH)2 electrocatalyst prepared by one-step fast electrodeposition for efficient and durable water splitting

Developing non-noble metal catalysts with excellent electrocatalytic performance and stability is of great significance to hydrogen production by water electrolysis, but there are still problems of low activity, complex preparation and high cost. Herein, we fabricated a novel Ni₃S₂/Ni(OH)₂ dual-functional electrocatalyst by a one-step fast electrodeposition on nickel foam (NF). While maintaining the electrocatalytic performance of Ni₃S₂, the existence of heterostructure and Ni(OH)₂ co-catalyst function greatly improves the overall water splitting performance of Ni₃S₂/Ni(OH)₂–NF. Hence, It shows a low overpotential of 66 mV at 10 mA cm^?2 for HER and 249 mV at 20 mA cm^?2 for OER. The dual-functional electrocatalyst needs only 1.58 V at 20 mA cm^?2 when assembled two-electrode electrolytic cell. Impressively, the electrocatalyst also shows outstanding catalytic stability for about 800 h when 20 and 50 mA cm^?2 constant current was applied, respectively which demonstrates a potential electrocatalyst for overall water splitting.     

Reduced graphene oxide composite Ni3S2 microspheres grown directly on nickel foam as an efficient electrocatalyst for OER

The development of cheap, high-efficiency, and stable oxygen evolution reaction (OER) electrocatalysts is a current research hotspot. In this work, reduced graphene oxide (rGO) composite Ni₃S₂ microspheres grown directly on nickel foam (Ni₃S₂-rGO/NF) were prepared by tube furnace calcination and hydrothermal method. The Ni₃S₂-rGO/NF had excellent OER catalytic activity and stability with an overpotential of 303 mV at the current density of 100 mA cm⁻², which was 100 mV lower than that of Ni₃S₂/NF, and its Tafel slope was as low as 23 mV·dec⁻¹. The main reason for enhancing OER activity of the Ni₃S₂-rGO/NF is due to synergistic effect of Ni₃S₂ microspheres and rGO, which inhibited the production of NiS and refined the micron size of Ni₃S₂. This work offers a new method for developing stable and efficient OER catalysts.     

Porous flower-like nickel nitride as highly efficient bifunctional electrocatalysts for less energy-intensive hydrogen evolution and urea oxidation

Finding a suitable replacement for the high potential of anodic water electrolysis (oxygen evolution reaction (OER)) is significant for hydrogen energy storage and conversion. In this work, a simple and scalable method synthesizes a structurally unique Ni₃N nanoarray on Ni foam, Ni₃N-350/NF, that provides efficient electrocatalysis for the urea oxidation reaction (UOR) that transports 10 mA cm⁻² at a low potential of 1.34 V. In addition, Ni₃N-350/NF exhibits electro-defense electrocatalytic performance for hydrogen evolution reaction, which provides a low overpotential of 128 mV at 10 mA cm⁻². As proof of concept, all-water-urea electrolysis measurement is carried out in 1 M KOH with 0.5 M Urea with Ni₃N-350/NF as cathode and anode respectively. Ni₃N-350/NF||Ni₃N-350/NF electrode can provide 100 mA cm⁻² at a voltage of only 1.51 V, 160 mV less than that of water electrolysis, which proves its commercial viability in energy-saving hydrogen production.     

Cu2S/Ni3S2 ultrathin nanosheets on Ni foam as a highly efficient electrocatalyst for oxygen evolution reaction

It is an inevitable choice to find efficient and economically-friendly electrocatalysts to reduce the high overpotential of oxygen evolution reaction (OER), which is the key to improve the energy conversion efficiency of water splitting. Herein, we synthesized Cu₂S/Ni₃S₂ catalysts on nickel foam (NF) with different molar ratios of Ni/Cu by a simple two-step hydrothermal method. Cu₂S/Ni₃S₂-0.5@NF (CS/NS-0.5@NF) effectively reduces the overpotential of OER, displaying small overpotentials (237 mV@100 mA cm^?2 and 280 mV@500 mA cm^?2) in an alkaline solution, along with a low Tafel slope of 44 mV dec^?1. CS/NS-0.5@NF also presents an excellent durability at a relatively high current density of 100 mA cm^?2 for 100 h. The excellent performance is benefited by the prominent structural advantages and desirable compositions. The nanosheet has a high electrochemical active surface area and the porous structure is conducive to electrolyte penetration and product release. This work provides an economically-friendly Cu-based sulfide catalyst for effective electrosynthesis of OER.     

One-step gas phase sulfided NiFe coating as self-supporting electrode for high efficiency oxygen evolution reaction

The development of cost-effective oxygen evolution reaction (OER) electrocatalytic electrodes is one of the essential means of applying green hydrogen energy. Due to the complex steps in the anodic OER, the high overpotential hinders the kinetics of water splitting. In this paper, the sulfided NiFe coating was innovatively designed as a self-supporting OER electrode by high-velocity oxygen fuel (HVOF) spraying coupled with one-step gas phase sulfuration. The thickness of the NiFe coating is approximately 20 μm. After the sulfuration treatment, the surface of the NiFe coating is remolded into a uniform rock sugar-like structure, and simultaneously forms new NiS and Ni₃S₄ phases. The sulfided NiFe coating electrode shows relatively low overpotentials of 220 mV and 253 mV at the current density of 10 mA cm⁻² and 100 mA cm⁻², respectively, and the Tafel slope is as low as 28.6 mV dec⁻¹. The excellent electrocatalytic activity is mainly attributed to the synergistic effect of sulfides, the adsorption of OH⁻ by the Ni³⁺ in alkaline electrolyte, and the acceleration of O₂ separation by the S²⁻ through promoting the cleavage of O–O bonds. In addition, the sulfided NiFe coating electrode also has a small charge transfer resistance, and the potential stability is as high as 98.1% in the 70 h stability test. Therefore, the development of sulfided transition metal coating electrodes can provide a new idea for the large-scale industrialization of water splitting.     

Nanoengineered Zn-modified Nickel Sulfide (NiS) as a bifunctional electrocatalyst for overall water splitting

Developing an efficient and inexpensive electrocatalyst is of paramount importance for realizing the green hydrogen economy through electrocatalytic water splitting. Here, we demonstrated a facile large-scale, industrially viable binder-free synthesis of Zn-doped NiS electrocatalyst on bare nickel foam (NF) through a hydrothermal technique. The present catalyst, i.e., nickel sulfide (NiS) nanosheets on nickel foam with optimized doping of Zn atom (Zn–NiS-3), displays excellent catalytic efficacy for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). It requires an overpotential of 320 mV for OER at a current density of 50 mA cm⁻² and an overpotential of 208 mV for HER at a current density of 10 mA cm⁻². The water electrolyser device having Zn–NiS-3 electrocatalyst as both cathode and anode show excellent performance, requiring a cell voltage of only 1.71 V to reach a current density of 10 mA cm⁻² in an alkaline media. The density functional theory (DFT) based calculations showed enhanced density of states near Fermi energy after Zn doping in NiS and attributed to the enhanced catalytic activities. Thus, the present study demonstrates that Zn–NiS-3@NF can be coined as a viable electrocatalyst for green hydrogen production.     

Construction of NiCo2S4/Ni3S2 nanoarrays on Ni foam substrate as an enhanced electrode for hydrogen evolution reaction and supercapacitors

Developing a multifunctional and sustainable electrode material for hydrogen evolution reaction and supercapacitors is a highly feasible avenue for producing the high energy density and renewable energies. In our study, nanostructured NiCo₂S₄/Ni₃S₂/NF nanoarrays are rational developed in experiments via a simple hydrothermal reaction. Ascribed to the 3D nanostructured NiCo₂S₄/Ni₃S₂ with numerous exposure active sites and large contact areas for the electrolyte, the binder-free feature of NiCo₂S₄/Ni₃S₂/NF facilitates a low charge transfer resistance, as well as the synergetic effect of NiCo₂S₄ and Ni₃S₂. The obtained electrocatalyst showed ultrahigh electrocatalytic activity with an overpotential of 111 mV at 10 mA cm⁻² and a Tafel slope of 57 mV dec⁻¹. In addition, the electrode showed an area specific capacity of 6.13 F cm⁻² at 10 mA cm⁻² and superior rate capability (2.72 F cm⁻² at 80 mA cm⁻²), accompanied by excellent cycling stability. This results presented in our work can provide an effective strategy for rational design of other hybrid materials with excellent electrochemical performance in the application of electrocatalysis and supercapacitors.     

Effect of cation substitution on the water splitting performance of spinel cobaltite MCo2S4 (M = Ni,Cu and Co)

The introduction of different ions is an effective method for regulating electron distribution and increasing the electrocatalytic activity of spinel cobalt sulfide (Co₃S₄). However, the effect of doping different ions on water splitting performance has not been systematically clarified. Therefore, a detailed research is done to illuminate the doping of different ions on the water splitting performance of spinel cobalt sulfide MCo₂S₄ (M = Ni, Cu and Co) nanorods grown on Ni foam. To drive the electrocatalytic current of 50 mA/cm² and 10 mA/cm², the CuCo₂S₄/NF material only requires an overpotential of 240 mV for oxygen evolution reaction (OER) and an overpotential of 142 mV for hydrogen evolution reaction (HER). The results of density functional theory and experiment demonstrate that the strong water adsorption energy and the large electrochemical activity area make CuCo₂S₄/NF show good catalytic activity. The CuCo₂S₄/NF nanorods material presents superior electrochemistry performance with a small voltage 1.53 V. The water oxidation activity increases linearly before nonlinearly improving with the increasing of pH, indicating that the substrate changes from water to hydroxyl. It is noteworthy that CuCo₂S₄/NF will be transformed into amorphous oxide active species, which will act as a stable catalyst during the reaction.     

Nickel foam-supported Fe,Ni-Polyporphyrin microparticles: Efficient bifunctional catalysts for overall water splitting in alkaline media

Developing highly active, stable and sustainable electrocatalysts for overall water splitting is of great importance to generate renewable H₂ for fuel cells. Herein, we report the synthesis of electrocatalytically active, nickel foam-supported, spherical core-shell Fe-poly(tetraphenylporphyrin)/Ni-poly(tetraphenylporphyrin) microparticles (FeTPP@NiTPP/NF). We also show that FeTPP@NiTPP/NF exhibits efficient bifunctional electrocatalytic properties toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER). Electrochemical tests in KOH solution (1 M) reveal that FeTPP@NiTPP/NF electrocatalyzes the OER with 100 mA cm⁻² at an overpotential of 302 mV and the HER with 10 mA cm⁻² at an overpotential of 170 mV. Notably also, its catalytic performance for OER is better than that of RuO₂, the benchmark OER catalyst. Although its catalytic activity for HER is slightly lower than that of Pt/C (the benchmark HER electrocatalyst), it shows greater stability than the latter during the reaction. The material also exhibits electrocatalytic activity for overall water splitting reaction at a current density of 10 mA cm⁻² with a cell voltage of 1.58 V, along with a good recovery property. Additionally, the work demonstrates a new synthetic strategy to an efficient, noble metal-free-coordinated covalent organic framework (COF)-based, bifunctional electrocatalyst for water splitting.     

The 3D ultra-thin Cu1-xNixS/NF nanosheet as a highly efficient and stable electrocatalyst for overall water splitting

In recent years, the exploration of efficient and stable noble-metal-free electrocatalysts is becoming increasingly important, used mainly for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER). In this work, a new ultrathin porous Cu_1-xNi_xS/NF nanosheets array was constructed on the 3D nickel skeleton by two-step method: hydrothermal method and vulcanization method. Through these two processes, Cu_1-xNi_xS/NF has a larger specific surface area than that of foamed nickel (NF) and Cu_1-xNi_xO/NF. The Cu_1-xNi_xS/NF materials show excellent catalytic activity by accelerating the electron transfer rate and increase the amount of H₂ and O₂ produced. The lower overpotential was obtained only 350 mV at 20 mA cm⁻² for OER, not only that, but also the same phenomenon is pointed out in HER, optimal Cu_1-xNi_xS/NF presents low overpotentials of 189 mV to reach a current density of 10 mA cm⁻² in 1.0 M KOH for HER. Both OER and HER shows a lower Tafel slope: 51.2 mV dec⁻¹ and 127.2 mV dec⁻¹, subsequently, the overall water splitting activity of Cu_1-xNi_xS/NF was investigated, and the low cell voltage was 1.64 V (current density 10 mA cm⁻²). It can be stable for 14 h during the overall water splitting reaction. These results fully demonstrate that Cu_1-xNi_xS/NF non-precious metal materials can be invoked become one of the effective catalysts for overall water splitting, providing a richer resource for energy storage.     

NiFe2O4–Ni3S2 nanorod array/Ni foam composite catalyst indirectly controlled by Fe3+ immersion for an efficient oxygen evolution reaction

A NiFe alloy was designed on nickel foam (NF) as a precursor using cathodic electrodeposition. NiFe₂O₄–Ni₃S₂ nanorods (NRs) composite catalysts were prepared by Fe³⁺ impregnation and further hydrothermal sulfuration methods. NiFe₂O₄–Ni₃S₂ nanosheets (NSs) were also prepared by direct hydrothermal sulfuration of the NiFe alloy for comparison. Compared to the dense NS structure of the NiFe₂O₄–Ni₃S₂ NSs/NF, the NiFe₂O₄–Ni₃S₂ NRs/NF showed better oxygen evolution performance due to its unique weed-like NR array structure composed of additional oxygen evolution reaction (OER) active sites, with a strong electron interaction for Ni and Fe and the active sulfide synergistic effect with oxides. Therefore, Driving a current density of 10 mA cm^?2 only requires an overpotential of 189 mV and the catalyst could provide 100 mA cm^?2 continuously and be constant for more than 80 h in 1.0 M KOH. This experiment indicated that Fe³⁺ immersion had an indirect regulating effect on the morphological growth of the catalyst, which provided a novel concept for designing better OER catalysts.     

Electrodeposition of NiS/Ni2P nanoparticles embedded in amorphous Ni(OH)2 nanosheets as an efficient and durable dual-functional electrocatalyst for overall water splitting

To develop earth-abundant and cost-effective catalysts for overall water splitting is still a major challenge. Herein, a unique “raisins-on-bread” Ni–S–P electrocatalyst with NiS and Ni₂P nanoparticles embedded in amorphous Ni(OH)₂ nanosheets is fabricated on Ni foam by a facile and controllable electrodeposition approach. It only requires an overpotential of 120 mV for HER and 219 mV for OER to reach the current density of 10 mA cm⁻² in 1 M KOH solution. Employed as the anode and cathode, it demonstrates extraordinary electrocatalytic overall water splitting activity (cell voltage of only 1.58 V @ 10 mA cm⁻²) and ultra-stability (160 h @ 10 mA cm⁻² or 120 h @50 mA cm⁻²) in alkaline media. The synergetic electronic interactions, enhanced mass and charge transfers at the heterointerfaces facilitate HER and OER processes. Combined with a silicon PV cell, this Ni–S–P bifunctional catalyst also exhibits highly efficient solar-driven water splitting with a solar-to-hydrogen conversion efficiency of 12.5%.     

Paintbrush-like Co doped Cu3P grown on Cu foam as an efficient janus electrode for overall water splitting

In this work, we demonstrated a facile strategy to fabricate paintbrush-like Co Doped Cu₃P architecture grown on porous copper foam (Co-Cu₃P/CF), which was obtained from cation exchange reaction followed by a pyrolysis assisted phosphorization step. Co-Cu₃P/CF showed outstanding electrocatalytic performance for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in 1 M NaOH solution, affording low overpotential of 270 mV to reach the current density of 50 mA cm⁻² for OER. As for HER, a low overpotential of 200 mV is required to obtain the same catalytic current density. The overall water electrolyzer by using Co-Cu₃P/CF as both anode and cathode showed a low cell voltage of 1.55 V to deliver 10 mA cm⁻². The excellent electrocatalytic performance of Co-Cu₃P/CF could be ascribed to its paintbrush-like hierarchical architecture, offering plentiful of active sites and accelerating electrolyte penetration, the presence of Co dopant also could rationally modify its electronic properties, and thus lead to the synergetic effects.     

3D V–Ni3S2@CoFe-LDH core-shell electrocatalysts for efficient water oxidation

Studying cheap and efficient electrocatalysts is of great significance to promote the sluggish kinetics of oxygen evolution reaction (OER). Here, we adopted a simple two-step method to successfully prepare the 3D V–Ni₃S₂@CoFe-LDH core-shell electrocatalyst. The V–Ni₃S₂@CoFe-LDH/NF shows excellent OER performance with low overpotential (190 mV at 10 mA/cm² and 240 mV at 50 mA/cm²), small Tafel slope (26.8 mV/dec) and good long-term durability. Excitingly, to reach the same current density, V–Ni₃S₂@CoFe-LDH/NF electrode even needs much smaller overpotential than RuO₂. Furthermore, the outstanding OER activity of V–Ni₃S₂@CoFe-LDH/NF is ascribed to the following reasons: (1) V–Ni₃S₂ nanorod cores improve the conductivity and ensure the fast charge transfer; (2) CoFe-LDH nanosheets interconnected with each other provide more exposed active sites; (3) the unique 3D core-shell structures are favorable for electrolyte diffusion and gas releasing. Our work indicates that building 3D core-shell heterostructure will be a useful way to design good electrocatalysts.     

One-step preparation of Fe-doped Ni3S2/rGO@NF electrode and its superior OER performances

In order to improve the OER performance, Ni₃S₂-based catalysts were directly grown on Ni substrate by simultaneously doping of Fe and compositing with reduced graphene oxide (rGO). Synthesis and loading of Ni₃S₂/rGO were completed during a one-step hydrothermal process, in which Ni foam acted as support and Ni source of Ni₃S₂, as well as the subsequent current collector. It is found that either GO or Fe salt tuned Ni₃S₂ nanosheets into thinner and smaller interconnected nanosheets anchored on rGO, which enhanced the charge transfer resistance and improved the active sites. Hence, as-synthesized Fe-doped Ni₃S₂/rGO composite at 120 °C (Fe-2-Ni₃S₂/rGO@NF-120) exhibited an enhancement on OER performances: An overpotential of 247 mV at 20 mA cm⁻², and a small Tafel slope of 63 mV dec⁻¹, as well as an excellent stability of: 20 h maintaining at 20 mA cm⁻² or 50 mA cm⁻².     

Tailoring Cr doped NiFeP nanoparticles embedded in 3D cellulose nanofibrils carbon architecture for efficient oxygen evolution reaction

Oxygen evolution reaction (OER) is considered the bottleneck that restricting the pace of electrocatalytic hydrogen production. Modulating structure and heterogeneous doping are essential approaches to effectively promote the electrocatalytic efficiency and stability. Herein, three-dimensional (3D) porous Cr doped NiFeP nanoparticles encapsulated in cellulose nanofibrils (CNF) carbon architecture (Cr–NiFeP/NC) with high-efficiency and durable OER performance was constructed. CNF played crucial role on the construction of 3D porous framework and promoting the OER performance significantly. Benefiting from the 3D porous structure, high specific surface area and exposed abundant active sites, the Cr–NiFeP/NC electrocatalyst displayed excellent OER performance, which the overpotential to deliver the current density of 10 mA cm⁻² was only 249 mV with a Tafel slope of 51.2 mV dec⁻¹ in 1.0 M KOH, outperforming the RuO₂ and other reported electrocatalysts remarkably. In addition, the Cr–NiFeP/NC electrocatalyst exhibited outstanding stability, which the overpotential was only increased by 2.5% after 48 h chronopotential measurement to deliver a current density of 10 mA cm⁻² with stable morphology and structure. This work demonstrated an integrated strategy of Cr doping and 3D porous structure modulating employed CNF as skeleton for the efficient and durable OER performance, providing a spark for hydrogen production by water splitting.