共查询到20条相似文献,搜索用时 375 毫秒
1.
2.
3.
《机械制造与自动化》2017,(3)
砂轮架作为磨齿机的磨削部分,其动态性能对磨齿机的磨削精度起到关键性作用。利用ANSYS14.0软件对内磨齿机砂轮架进行建模,然后对其进行动态分析,并找出其设计的不足,最后对其进行了优化设计,保证了其磨削精度的同时还减轻了质量,节约成本,计算与分析结果为砂轮架的进一步分析提供了理论依据。 相似文献
4.
首先介绍了某型卧式加工中心自动换刀系统的结构特点和换刀过程,然后对其可靠性试验数据进行了分析,并以此为基础建立了换刀系统的可靠性模型,分析了其可靠性特性,结果表明其可靠性薄弱环节为机械手装置和刀库装置。此外还从机械手故障、刀库故障、液压故障和电气控制故障4个方面对其常见故障进行了详细分析,为其可靠性改进和故障维修指明了方向。 相似文献
5.
以螺旋输送机理论为基础,设计了一种等厚分层连续出料螺杆,介绍了其设计方法,通过理论分析推导出其参数变化规律;并借助大型有限元分析软件ANSYS进行线性静力学分析,验证了其结构强度的安全性,并根据其位移响应修正了其间隙设计参数,为后续的改进和优化提供了参考和借鉴。 相似文献
6.
介绍了WirelessHART网络及其研究现状,分析了其技术难点,最后探讨了其应用领域与未来发展前景。 相似文献
7.
8.
9.
10.
11.
12.
Taik-Dong Cho Sang-Min Yang Ho-Young Lee Sung-Ho Ko 《Journal of Mechanical Science and Technology》2007,21(5):814-820
A pneumatic control valve is a piping element that controls the volumetric flow rate and pressure of a fluid; it is necessary
to analyze the characteristics of the forces with respect to the opening of the valve in order to evaluate its operating performance.
The forces occurring during operation are: resisting force and actuator force, where the load resistance is mostly affected
by the fluid pressure difference of the valve. In this study, a force balance equation derived from the equilibrium relationship
between the resisting force and the actuator force of an unbalanced globe valve is proposed, and the force balance equations
are used to model the dynamic equations of a pneumatic unbalanced globe valve installed in nuclear power plants. A CFD analysis
is also carried out to evaluate the pressure distribution and forces acting on the top and bottom planes of the valve plug.
The results of this analysis have been verified through experimentation. This study has shown that the fluid pressure difference
between the inlet and outlet of the valve, measured from the force balance equation of an unbalanced valve, should actually
be examined with the fluid-pressure difference between the top and bottom side of the valve plug. 相似文献
13.
14.
Globe valves are one of the oldest and most widely used flow control valves. However, cavitation due to high-pressure drop is a common phenomenon in such valves, reducing valve lifetime and increasing replacement costs. Recently, a series of perforated cages have been used in globe valves to reduce cavitation damage (especially in the body and disk). In this study, a globe valve is numerically investigated under four different structures, i.e., without the cage, with a perforated cage whose holes are radial, with a perforated cage whose holes are facing upwards, and with a perforated cage whose holes are facing downwards. The effects of the valve opening, inlet velocity, and holes direction on the pressure drop and cavitation incipient/intensity are investigated. The results show that cavitation is observed with the decrease of the valve opening even at the low velocities. And with increasing the velocity inlet, the pressure drop and cavitation intensity increase significantly. It can also be concluded that in the globe valve using a perforated cage with holes downwards, less cavitation is observed than in other models. Therefore, this configuration is proposed to protect the inner components of the valve (such as seat, seal, and plug) from cavitation damage. 相似文献
15.
17.
18.
20.
核级波纹管密封钠截止阀的研制 总被引:2,自引:0,他引:2
介绍了核级波纹管密封钠截止阀的性能参数、结构及其主要零件的材料。分析了钠阀冷态循环、流阻、寿命试验及地震、热态试验的试验过程及其技术要求。阐述了钠阀门技术设计要点及其实践经验。 相似文献