A new wireless network medium access protocol based on cooperation

In this paper, we propose a new media access protocol for wireless networks, that due to its ability to resolve collisions can achieve high throughput. We view the wireless network as a spatially distributed antenna with antenna elements linked via the wireless channel. When there is a collision, the collided packets are saved in a buffer. In the slots following the collision, a set of nodes designated as nonregenerative relays retransmit the signal that they received during the collision slot. By processing the originally collided packets and the signals forwarded by the relays, the destination node can recover the original packets. The proposed scheme maintains the benefits of ALOHA systems, i.e., needs no scheduling overhead and is suitable for bursty sources, such as multimedia sources. It also offers the benefits of multi-antenna systems, i.e., spatial diversity while employing a single transmit/receive antenna at each node. Spatial diversity enables it to be robust to the wireless channel. The proposed approach achieves higher throughput and energy savings than existing techniques that allow for multiple packet reception.     

RM-MAC: a reservation based multi-channel MAC protocol for wireless sensor networks

Convergecast is a general communication pattern of wireless sensor networks (WSNs) in which sensed data is collected from outlying sensor nodes and is transmitted to a sink node. In this paper, we consider periodic convergecast, in which data packets are generated and transmitted repeatedly with a certain interval. To support the periodical packet delivery efficiently, we propose a reservation based multi-channel MAC protocol (RM-MAC) which employs a time reservation mechanism. Periodical packet delivery allows receiver nodes to recognize when the next packet is transmitted, which makes the nodes reserve the time for the next packet transmission. Consequently, our proposed mechanism can guarantee minimum delivery latency from source nodes to a sink node. Furthermore, RM-MAC provides a collision resolution mechanism which coordinates the reserved periodical transmissions among multiple sender nodes. It can prevent repeated collisions caused by the multiple-senders-single-receiver problem. We implement RM-MAC by using an ns-2 simulator to compare its performance with other protocols. The simulation results show that RM-MAC outperforms existing protocols in terms of energy efficiency and packet delivery latency.     

An average velocity-based routing protocol with low end-to-end delay for wireless sensor networks

To reduce energy consumption, in most MAC protocols for wireless sensor networks, listen-sleep cycles are adopted. However, even though it is a good solution for energy efficiency, it may introduce a large end-to-end delay due to sleep delay, since a node with a packet to transmit should wait until the next-hop node of the packet awakes. To resolve this issue, in this paper, we propose the Average Velocity-Based Routing (AVR) protocol for wireless sensor networks that aims at reducing the end-toend delay. The AVR protocol is a kind of a geographic routing protocol that considers both location of a node and waiting time of a packet at the MAC layer. When a node can use information of n-hop away neighbor nodes, it calculates the n-hop average velocity for each of its one-hop neighbor nodes and forwards a packet to the neighbor node that has the highest n-hop average velocity. Simulation results show that as the knowledge range, n, increases, the average end-to-end delay decreases.     

A data transmission protocol for reliable and energy-efficient data transmission in a wireless sensor-actuator network

In a wireless sensor-actuator network, sensor nodes gather information on the physical world and can deliver messages with sensed values to only nearby nodes due to weak radio. Thus, messages sent by nodes might be lost due to not only collision but also noise. Messages are forwarded by sensor nodes to an actuator node. In the redundant data transmission (RT) protocol, a sensor node sends a message with not only its sensed value but also sensed values received from other sensor nodes. Even if a message with a sensed value v is lost, an actuator node can receive the value v from a message sent by another sensor node. In addition, we have to reduce the energy consumption of a sensor node. A sensor node mainly consumes the energy to send and receive messages. Even if an event occurs, only some number of sensor nodes sensing the event send the sensed values to reduce the total energy consumption. We discuss an energy-efficient data transmission protocol. We evaluate the RT protocol compared with the CSMA protocol in terms of how much sensing data a node can receive in presence of messages loss. We evaluate the RT protocol in terms of how many number of sensed values an actuator node can receive in presence of message loss. We show that about 72% of sensed values can be delivered to an actuator node even if 95% of messages are lost due to noise and collision.     

NHRPA: a novel hierarchical routing protocol algorithm for wireless sensor networks

Considering severe resources constraints and security threat hierarchical routing protocol algorithm. The proposed routing of wireless sensor networks （WSN）, the article proposed a novel protocol algorithm can adopt suitable routing technology for the nodes according to the distance of nodes to the base station, density of nodes distribution, and residual energy of nodes. Comparing the proposed routing protocol algorithm with simple direction diffusion routing technology, cluster-based routing mechanisms, and simple hierarchical routing protocol algorithm through comprehensive analysis and simulation in terms of the energy usage, packet latency, and security in the presence of node protocol algorithm is more efficient for wireless sensor networks. compromise attacks, the results show that the proposed routing     

Opportunistic routing with in-network aggregation for asynchronous duty-cycled wireless sensor networks

We propose an opportunistic routing protocol for wireless sensor networks designed to work on top of an asynchronous duty-cycled MAC. Opportunistic routing can be very effective when used with asynchronous duty-cycled MAC because expected waiting time of senders—when they stay on active mode and transmit packet streams—is significantly reduced. If there are multiple sources, energy consumption can be reduced further through in-network aggregation. The idea proposed in this paper is to temporarily increase duty cycle ratio of nodes holding packets, in order to increase chance of in-network aggregation and thus reduce energy consumption and extend network lifetime. In the proposed protocol called opportunistic routing with in-network aggregation (ORIA), whenever a node generates a packet or receives a packet to forward, it waits for a certain amount of time before transmitting the packet. Meanwhile, the node increases its duty cycle ratio, hoping that it receives packets from other nodes and aggregate them into a single packet. Simulation results show that ORIA saves considerable amount of energy compared to general opportunistic routing protocols, as well as tree-based protocols.     

Wireless Sensor Network Path Optimization Using Sensor Node Coverage Area Calculation Approach

The proposed work is based on the path optimization approach for wireless sensor network (WSN). Path optimization is achieved by using the NSG 2.1 Tool, TCL Script file and NS2 simulator to improve the quality of service (QoS). Path optimization approach finds best suitable path between sensor nodes of WSN. The routing approach is not only the solution to improve the quality but also improves the WSN performance. The node cardinally is taken under consideration using the ad-hoc on demand distance vector routing protocol mechanism. Ad hoc approach emphasize on sensor nodes coverage area performance along with simulation time. NSG 2.1 Tool calculates the sensor node packet data delivery speed which can facilitate inter-node communication successfully. An experimental result verified that the proposed design is the best possible method which can escape from slow network response while covering maximum sensor nodes. It achieves coverage support in sensor node deployment. The result outcomes show best path for transferring packet from one sensor node to another node. The coverage area of sensor node gives the percentage of average coverage ratio of each node with respect to the simulation time.

     

EARQ: Energy Aware Routing for Real-Time and Reliable Communication in Wireless Industrial Sensor Networks

Wireless industrial sensor networks are wireless sensor networks which have been adapted to industrial applications. Most techniques for wireless sensor networks can be applied to wireless industrial sensor networks. However, for industrial applications of wireless industrial sensor networks, new requirements such as real-time, reliable delivery need to be considered. In this paper, we propose EARQ, which is a novel routing protocol for wireless industrial sensor networks. It provides real-time, reliable delivery of a packet, while considering energy awareness. In EARQ, a node estimates the energy cost, delay and reliability of a path to the sink node, based only on information from neighboring nodes. Then, it calculates the probability of selecting a path, using the estimates. When packet forwarding is required, it randomly selects the next node. A path with lower energy cost is likely to be selected, because the probability is inversely proportional to the energy cost to the sink node. To achieve real-time delivery, only paths that may deliver a packet in time are selected. To achieve reliability, it may send a redundant packet via an alternate path, but only if it is a source of a packet. Experimental results show that EARQ is suitable for industrial applications, due to its capability for energy efficient, real-time, reliable communications.      

DEC-MAC: delay- and energy-aware cooperative medium access control protocol for wireless sensor networks

This paper deals with two critical issues in wireless sensor networks: reducing the end-to-end packet delivery delay and increasing the network lifetime through the use of cooperative communications. Here, we propose a delay- and energy-aware cooperative medium access control (DEC-MAC) protocol, which trades off between the packet delivery delay and a node’s energy consumption while selecting a cooperative relay node. DEC-MAC attempts to balance the energy consumption of the sensor nodes by taking into account a node’s residual energy as part of the relay selection metric, thus increasing the network’s lifetime. The relay selection algorithm exploits the process of elimination and the complementary cumulative distribution function for determining the most optimal relay within the shortest time period. Our numerical analysis demonstrates that the DEC-MAC protocol is able to determine the optimal relay in no more than three mini slots. Our simulation results show that the DEC-MAC protocol improves the end-to-end packet delivery latency and the network lifetime significantly compared to the state-of-the-art protocols, LC-MAC and CoopMAC.     

Hybrid routing and load balancing protocol for wireless sensor network

In wireless sensor network, when the nodes are mobile, the network structure keeps on changing dynamically, that is, new nodes enter the network and old members exit the network. As a result, the path from one node to the other varies from time to time. In addition, if the load on a particular part of the network is high, then the nodes will not be capable of transmitting the data. Thus, data delivery at the destination will be unsuccessful. Moreover, the part of the network involved in transmitting the data should not be overloaded. To overcome these issues, a hybrid routing protocol and load balancing technique is discussed in this paper for the mobile data collectors in which the path from source to destination is ensured before data transmission. The hybrid routing protocol that combines the reactive and proactive approach is used to enhance gradient based routing protocol for low power and lossy networks. This protocol can efficiently handle the movement of multiple sinks. Finally, load balancing is applied over the multiple mobile elements to balance the load of sensor nodes. Simulation results show that this protocol can increase the packet delivery ratio and residual energy with reduced delay and packet drop.     

Adaptive Load-Aware Congestion Control Protocol for Wireless Sensor Networks

Congestion control in wireless sensor networks (WSNs) is crucial. In this article, we discuss congestion control and the adaptive load-aware problem for sensor nodes in WSNs. When the traffic load of a specific node exceeds its the available capacity of the node, a congestion problem occurs because of buffer memory overflow. Congestion may cause serious problems such as packet loss, the consumption of power, and low network throughput for sensor nodes. To address these problems, we propose a distributed congestion control protocol called adaptive load-aware congestion control protocol (ALACCP). The protocol can adaptively allocate the appropriate forwarding rate for jammed sensor nodes to mitigate the congestion load. Through the buffer management mechanism, the congestion index of neighboring sensor nodes, and an adjustment of the adaptive forwarding rate, the degree of congestion is alleviated markedly. The performance in allocating the forwarding rate effectively to neighboring sensor nodes also improves. The ALACCP can avoid packet loss because of traffic congestion, reduce the power consumption of nodes, and improve the network throughput. Simulation results revealed that the proposed ALACCP can effectively improve network performance and maintain the fairness of networks.     

一种基于0.18μm CMOS工艺的智能传感器网络节点设计与实现

针对当前无线监测网络节点存在无线通信距离小、数据传输周期短等问题,设计并实现了一种基于0.18 μm CMOS工艺的智能传感器网络节点.该无线传感器网络节点由无线传感器模块、CC2430处理器模块、无线通信模块以及电源模块构成.其中,CC2430处理器模块采用0.18 μm CMOS工艺控制电流损耗和模式变换时间,提高电源的运行周期,并采用0.18 μm CMOS工艺中低噪声放大器和UQ下变频对天线采集的射频信号进行操作,获取2.4 GHz的数据扩频,增强CC2420的无线通信抗干扰性能.设计了无线传感器网络节点中的SHTIO温湿度传感器、MS5534B集成压阻式压力传感器和ADXL202E双轴加速度传感器,并给出节点软件的结构和主程序流程.实验检测结果表明,设计的无线传感器网络具备较优的运行性能,丢包率较低,通信距离与运行周期明显优于传统方法.     

Decentralized multiuser diversity with opportunistic packet transmission in MIMO wireless sensor networks

In this study, we consider a single-hop wireless sensor network where both the sensor nodes and the controller node have multiple antennas. We focus on single beam opportunistic communication and propose a threshold-based medium access control (MAC) scheme for uplink packet transmission which exploits multiuser diversity gain without feedback in a decentralized manner. Packet transfer from sensor nodes to the controller node is initiated when the channel quality of any node exceeds the predefined threshold based on the effective signal-to-noise ratio (ESNR) measurements at the sensor nodes through linear combining techniques. The optimum threshold is determined to maximize the probability of successful packet transmission where only one sensor node transmits its packet in one time-slot. The proposed scheme trades the successful packet rate to increase the SNR of the successful packets assuming Rayleigh fading and collision-based reception model. Computer simulations confirm that proposed scheme has higher successful packet SNR compared to the simple time division multiple access (TDMA)-based MAC scheme with round-robin fashion. The use of multiple antennas at the sensor nodes can also improve the throughput of proposed scheme compared with our previous scheme without implementing the spatial diversity at the SNs.     

Simulation and analysis of node throughput using smart antenna in wireless mesh networks

Smart antenna technology is introduced to wireless mesh networks. Smart antennas based wider-range access medium access control (MAC) protocol (SWAMP) is used as MAC protocol for IEEE 802.11 mesh networks in this study. The calculation method of node throughput in chain and arbitrary topology is proposed under nodes fairness guarantee. Network scale and interference among nodes are key factors that influence node throughput. Node distribution pattern near the gateway also affects the node throughput. Experiment based on network simulator-2 (NS-2) simulation platform compares node throughput between smart antenna scenario and omni-antenna scenario. As smart antenna technology reduces the bottle collision domain, node throughput increases observably.     

A new load balancing and data collection algorithm for energy saving in wireless sensor networks

Data gathering is a major function of many applications in wireless sensor networks. The most important issue in designing a data gathering algorithm is how to save energy of sensor nodes while meeting the requirements of special applications or users. Wireless sensor networks are characterized by centralized data gathering, multi-hop communication and many to one traffic pattern. These three characteristics can lead to severe packet collision, network congestion and packet loss, and even result in hot-spots of energy consumption thus causing premature death of sensor nodes and entire network. In this paper, we propose a load balance data gathering algorithm that classifies sensor nodes into different layers according to their distance to sink node and furthermore, divides the sense zone into several clusters. Routing trees are established between sensor node and sink depending on the energy metric and communication cost. For saving energy consumption, the target of data aggregation scheme is adopted as well. Analysis and simulation results show that the algorithm we proposed provides more uniform energy consumption among sensor nodes and can prolong the lifetime of sensor networks.     

无线传感器网络中基于NDMA的跨层协作多包接收

本文研究了协作分集下的NDMA(网络辅助分集多址接入)机制,针对无线传感器网络特点和信道矩阵满秩性要求设计中继选择准则,提出了一个新的跨层协作多包接收机制.该机制在抗信道衰落的同时可有效限制数据包重传次数,从而大大提高多包接收的效率.对新机制的性能仿真以及该机制与NDMA、联合NDMA、时隙ALOHA之间的性能对比证实了新机制的有效性.     

TelG Mote: A Green Wireless Sensor Node Platform for Smart Home and Ambient Assisted Living

The wireless sensor network (WSN) consists of sensor nodes that interact with each other to collectively monitor environmental or physical conditions at different locations for the intended users. One of its potential deployments is in the form of smart home and ambient assisted living (SHAAL) to measure patients or elderly physiological signals, control home appliances, and monitor home. This paper focuses on the development of a wireless sensor node platform for SHAAL application over WSN which complies with the IEEE 802.15.4 standard and operates in 2.4 GHz ISM (industrial, scientific, and medical) band. The initial stage of SHAAL application development is the design of the wireless sensor node named TelG mote. The main features of TelG mote contributing to the green communications include low power consumption, wearable, flexible, user-friendly, and small sizes. It is then embedded with a self-built operating system named WiseOS to support customized operation. The node can achieve a packet reception rate (PRR) above 80% for a distance of up to 8 m. The designed TelG mote is also comparable with the existing wireless sensor nodes available in the market.     

A hybrid reservation-based MAC protocol for underwater acoustic sensor networks

Due to the characteristics of underwater acoustic channel, such as long propagation delay and low available bandwidth, media access control (MAC) protocol designed for the underwater acoustic sensor network (UWASN) is quite different from that for the terrestrial wireless sensor network. However, for the contention-based MAC protocols, the packet transmission time is long because of the long preamble in real acoustic modems, which increase the packet collisions. And the competition phase lasts for long time when many nodes are competing for the channel to access. For the schedule-based MAC protocols, the delay is too long, especially in a UWASN with low traffic load. In order to resolve these problems, a hybrid reservation-based MAC (HRMAC) protocol is proposed for UWASNs in this paper. In the proposed HRMAC protocol, the nodes reserve the channel by declaring and spectrum spreading technology is used to reduce the collision of the control packets. Many nodes with data packets to be transmitted can reserve the channel simultaneously, and nodes with reserved channel transmit their data in a given order. The performance analysis shows that the proposed HRMAC protocol can improve the channel efficiency greatly. Simulation results also show that the proposed HRMAC protocol achieves better performance, namely higher network throughput, lower packet drop ratio, smaller end-to-end delay, less overhead of control packets and lower energy overhead, compared to existing typical MAC protocols for the UWASNs.     

超低功耗粮仓无线实时监测系统设计

针对在粮库温度智能监测领域,采用电线电缆传输数据的不便以及目前无线传感网络节点寿命短的问题,利用MSP430超低功耗单片机设计了超低功耗无线温度监测系统。基于超低功耗设计了系统的整体框架以及各模块硬件,其中包括节点、温度传感器模块、无线通信模块、通信协议、桌面实时显示程序,通信协议解决了多个节点同时介入时的碰撞问题并设计了节能算法。最后对整个系统的可靠性以及节点的使用寿命进行了实验验证,经过试验的检验本系统具有超低功耗的特点,基本满足超低功耗粮仓无线实时监测系统的设计需求。     

Simulation‐based real‐time routing protocol with load distribution in wireless sensor networks

In wireless sensor networks (WSNs), sensors gather information about the physical world and the base station makes decision and then performs appropriate actions upon the environment. This technology enables a user to effectively sense and monitor from a distance in real‐time. WSNs demand real‐time forwarding which means messages in the network are delivered according to their end‐to‐end deadlines (packet lifetime). This paper proposes a novel real‐time routing protocol with load distribution (RTLD) that ensures high packet throughput with minimized packet overhead and prolongs the lifetime of WSN. The routing depends on optimal forwarding (OF) decision that takes into account of the link quality (LQ), packet delay time and the remaining power of next hop sensor nodes. The proposed mechanism has been successfully studied through simulation work. Copyright © 2009 John Wiley & Sons, Ltd.