共查询到20条相似文献,搜索用时 93 毫秒
1.
软体仿蛙游动机器人关节式气动致动器研制 总被引:1,自引:0,他引:1
为实现仿蛙游动机器人的微小型化,增强其环境适应能力,结合软体材料的优势特点和青蛙划动推进的游动方式,提出了一种关节式气动软体致动器,该致动器在满足软体仿蛙机器人游动过程中的运动性能和力学性能的同时,使得其肢体结构更加紧凑、轻量.利用Yeoh本构模型和虚功原理,结合关节式气动软体致动器的几何参数,建立了致动器的形变分析模型.进而,在致动器总体尺寸受约束的情况下,以一定弯曲角度下致动器输出恢复力矩最大为目标,确定了致动器的具体结构参数.融合3D打印、模塑成型等加工工艺方法,加工制备了关节式气动软体致动器,并通过对比分析,确定了采用纤维线限制致动器径向凸起效应时纤维线的绕线形式和绕线密度.最后经过实验测试分析,该致动器质量约7.5 g,可实现由180°弯曲状态至伸直状态的形态变化,并且在弯曲角度一定时通过调整充入气压的大小可以匹配一定范围内不同大小的负载力矩,从而验证了针对软体仿蛙游动机器人设计的关节式气动软体致动器的可行性. 相似文献
2.
基于ADAMS的双足机器人拟人行走动态仿真 总被引:3,自引:2,他引:1
在双足机器人HEUBR_1的设计中,下肢采用了一种新的串并混联的仿人结构,并在足部增加了足趾关节.为验证该仿人结构设计的合理性及拟人步态规划的可行性,在ADAMS虚拟环境中建立了双足机器人HEUSR_1的仿真模型.通过拟人步态规划生成了运动仿真数据,在ADAMS虚拟环境中实现了具有足趾运动的拟人稳定行走,经仿真分析,获得了双足机器人HEUBR_1拟人行走步态下的运动学和动力学特性,仿真结果表明:双足机器人HEUBR_1的串并混联的仿人结构设计能够满足行走要求,且拟人步态规划方法可行,有足趾运动的拟人行走具有运动平稳、能耗低、足底冲击力小的特点.稳定行走的仿真步态数据可为下一步双足机器人HEUBR_1样机行走实验提供参考数据. 相似文献
3.
一种仿生水下机器人的设计与动力学分析 总被引:1,自引:0,他引:1
设计了一种基于波动长鳍推进的仿生水下机器人, 两侧长鳍对称安装于机器人本体两侧. 两侧长鳍分别由十个舵机驱动, 并按照余弦函数波动. 设计了实时控制器, 通过调整鳍条的振动频率和幅值达到控制长鳍运动的目的. 加速度信息和角速度信息由一个惯性测量单元采集. 为获取机器人游动性能与振动频率以及振动幅值之间的关系, 本文给出了长鳍波动运动的运动学分析和动力学分析. 本文通过将长鳍分割成若干小单元并单独计算作用于每个小单元上的作用力, 再计算所有小单元作用力在一个波动周期内的合力的方法, 获得了整个长鳍产生的平均推力. 通过前进游动和旋转游动实验, 验证了机构设计、运动学分析和动力学分析的有效性, 最后讨论了游动性能与波动参数之间的关系. 相似文献
4.
5.
6.
7.
两栖仿生机器人的研究是当前新兴的一个热点,它是军用机器人研究的一个重要分支。提出一种两栖仿生机器人的设计思路,确定了一些关键参数,如电机、游动机构等。并对两栖机器人仿鱼游动的运动学进行建模,最终通过实体仿真验证方案的可行性。 相似文献
8.
9.
10.
为实现足桨耦合推进仿海蟹机器人在未知海流扰动作用下对目标点的跟踪控制,对仿海蟹机器人浮游步态的动力学和运动控制进行研究.综合考虑重力、浮力、游泳足拍动产生的推力以及水动力的影响,建立了仿海蟹机器人水下复杂环境的动力学模型.在此基础上,设计了一种基于指数趋近律的滑模变结构控制器,将游泳足上下拍翼运动和摇翼运动的相位差作为被控量,对机器人的转艏角速率进行控制.通过李亚普诺夫直接法,证明该系统可实现全局渐近稳定.最后进行了单一目标点和多目标点跟踪运动仿真和实验,结果表明:该方法可以使机器人具有良好的目标点跟踪能力,并对系统动力学参数不确定性及外界扰动具有较高鲁棒性. 相似文献
11.
S. Shaw 《Journal of Computer Assisted Learning》1993,9(2):93-99
Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained. 相似文献
12.
European Community policy and the market 总被引:1,自引:0,他引:1
C. Lloyd 《Journal of Computer Assisted Learning》1993,9(2):86-91
Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven. 相似文献
13.
融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。 相似文献
14.
张涛 《计算机测量与控制》2015,23(1):86-89
为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值. 相似文献
15.
Wayne O’Brien Author Vitae 《Journal of Systems and Software》2008,81(11):1997-2013
Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them. 相似文献
16.
17.
This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives. 相似文献
18.
潘丽 《自动化与仪器仪表》2014,(7):80-82
自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。 相似文献
19.
Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what
is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic
sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and
its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of
an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify
robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can
or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest.
This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January
31–February 2, 2008 相似文献
20.
Jacob Palme 《Software》1979,9(9):741-747
The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users. 相似文献