共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
乌头碱类生物碱的质谱研究进展 总被引:9,自引:2,他引:9
本文简述质谱方法在乌头碱型 C19二萜生物碱的分析和结构鉴定等方面的应用以及不同电离方式下乌头碱的断裂行为 ,并总结我们近来利用电喷雾串联质谱技术分析几种乌头属植物中生物碱的研究结果 ,提出脂类生物碱 ( lipo-alkaloids)存在于其它乌头属植物中的可能性 相似文献
3.
4.
5.
6.
次乌头碱是一种二萜类双酯型乌头碱类化合物,广泛存在于乌头属植物中。本工作利用超高效液相色谱-串联质谱联用(UPLC-MS/MS)及高分辨质谱(HRMS)法分析确定了次乌头碱在大鼠肝微粒体CYP450中的代谢产物,分别选取磺胺苯吡唑、α-萘黄酮、奎那定、酮康唑、二乙基二硫代氨基甲酸铵作为CYP2C、CYP1A2、CYP2D、CYP3A、CYP2E1的特异性抑制剂,确定了各产物的CYP450酶的代谢亚型。结果表明:次乌头碱在大鼠肝微粒体中的主要代谢产物有7种,分别为15-脱氢次乌头碱、8-O-脱乙酰基-次乌头碱、2-羟基-次乌头碱、中乌头碱、1-去甲基-次乌头碱、18-去甲基-次乌头碱和羟基-8-O-脱乙酰基-次乌头碱;CYP3A为次乌头碱的主要代谢酶,CYP2C、CYP1A2、CYP2D和CYP2E1也参与了次乌头碱的代谢。 相似文献
7.
8.
液相色谱-电喷雾离子阱质谱分析乌头碱及其代谢物 总被引:2,自引:0,他引:2
为了研究乌头碱的生物转化规律,建立了乌头碱及其代谢物分离与鉴定的液相色谱-电喷雾离子阱质谱(LC-ESI-ITMS)方法。首先利用体外代谢法得到大鼠肝微粒体S9组分中乌头碱及代谢产物混合体系,然后利用LC-ESI-ITMS联用技术对各代谢物进行分析,得到乌头碱代谢物的[M+H]+分子质量信息,进一步结合多级串联质谱(LC/MSn)分析结果获得结构信息,对代谢物进行鉴定,从而推测代谢物结构,并结合大鼠尿中乌头碱及其代谢物的分析结果,得到乌头碱的生物转化规律。本方法在大鼠肝微粒体S9组分中鉴定得到8种体外代谢产物。 相似文献
9.
10.
附子是常用的中药药物,其中含有的脂类生物碱是附子中重要的活性成分。为了对附子中脂类生物碱的复杂体系进行快速分析,以附子中脂类生物碱为研究对象,建立一种稳定、高效、可靠的分析方法,本研究利用电喷雾三重四极杆质谱的多种扫描功能(全扫描、子离子扫描、母离子扫描、中性丢失扫描)分析附子中脂类生物碱。脂类生物碱间的差别分两种,其一是由于生物碱骨架不同导致的差别;其二是由于C8位所连接的脂肪酸的不同导致的差别。根据这两种差别,分析出附子中含量最多的4类生物碱骨架以及3类C8位取代脂肪酸,共12种脂类生物碱。三重四极杆质谱的母离子扫描及中性碎片丢失扫描功能用于分析附子中脂类生物碱,扫描速度快、效率高、一次扫描同时确定多种结构,所得结果稳定、可靠。 相似文献
11.
Clarence W.DE SILVA 《Instrumentation》2019,(4):72-84
An engineering system may consist of several different types of components,belonging to such physical"domains"as mechanical,electrical,fluid,and thermal.It is t... 相似文献
12.
The intersection of Quantum Technologies and Robotics Autonomy is explored in the present paper.The two areas are brought together in establishing an interdisci... 相似文献
13.
针对具有进油孔的有限长滑动轴承油膜力求解问题,采用变分原理和分离变量法,求得了有限长滑动轴承油膜压力分布的近似解析表达式。将油膜压力分布的近似解析表达式在油膜存在区域上进行积分,即得到了油膜力。将提出的计算有限长滑动轴承油膜力方法与无限长轴承模型、有限元方法的计算结果进行了比较,发现了提出的方法与有限元方法的计算结果很接近。最后,研究了进油孔位置和进油压力对油膜存在区域、油膜力等的影响,研究结果表明进油孔位置和进油压力对油膜存在区域和油膜力有较大的影响。 相似文献
14.
针对实际电网存在着大量的三绕组变压器,但国际上一些著名商业软件,如BPA仿真软件、Matpower这一权威潮流计算开源软件,均只提供双绕组变压器模型,限制了其在具有三绕组变压器的电力系统中的应用的问题,潮流计算是自主开发的电力系统各种应用软件的核心模块,因此依托国际权威开源程序进行二次开发,是一种较好的选择。对Matpower要求的数据格式进行了归纳,对变压器的一般的等值电路及带理想变压器的等值电路和带标幺值的等值电路进行了分析研究,提出了三绕组变压器转换为双绕组等效模型的建模方法,使得原先只适应双绕组变压器的潮流计算软件可以适用于三绕组变压器电网的潮流计算;最后以Matpower软件为例进行了案例计算,并用PSASP仿真软件进行对比验证。研究结果证明,所提出的建模方法是有效的。 相似文献
15.
A computer simulation model for the contact between longitudinally-oriented rough surfaces has been formulated. This model closely duplicates the actual surf ace contact deformation behavior by taking into account the elastic interactions between the asperities. There were no assumptions made about the shapes, or any deformation behavior of the asperities, except for their obeying the laws of elasticity. The plastic deformations on the high asperity peaks were taken into account by setting a ceiling on their contact pressures at the material hardness value. The simulations used real surface profiles which were digitized from unworn circumferentially ground steel surfaces. Each pair of these profiles was mathematically combined to form an equivalent rough profile pressing against an infinitely rigid flat and having the appropriately adjusted elastic modulus. A total of 28 different pairs of profiles were used in the simulations. Each contacting pair was subjected to 30 different load levels and the local contact pressures and deformations were calculated. The contact simulations yielded some important mathematical relationships between parameters, such as the real area of contact, average gap, and average asperity load through statistical curve fitting. Two analytical functions were generated to relate the average load to average gap and the real area of contact to load. 相似文献
16.
针对电站锅炉风险等级评价问题,将模糊综合评价技术应用到电站锅炉风险等级评价中。开展了电站锅炉失效影响因素及模糊评价因素的重要程度分析,建立了一套科学合理适于在线评价的电站锅炉风险评价体系,提出了模糊综合评价技术与改进的模糊层次分析法相结合的模糊风险评价方法,利用改进的模糊层次分析法计算了指标体系中各层指标权重。对某一台电站锅炉的实际运行工况影响子因素进行了模糊风险评价,采用模糊合成算子进行模糊综合运算得到电了站锅炉运行工况影响子因素的评价向量。研究结果表明:电站锅炉的运行工况影响子因素的风险评价等级为第6级,失效可能性等级为小,该电站锅炉运行工况良好。 相似文献
17.
30 keV Ga+ focused ion beam induced secondary electron (iSE) imaging was used to determine the relative contrast between several materials. The iSE signal compared from C, Si, Al, Ti, Cr, Ni, Cu, Mo, Ag, and W metal layers does not decrease with an increase in target atomic number Z2, and shows a non-monotonic relationship between contrast and Z2. The non-monotonic relationship is attributed to periodic fluctuations of the stopping power and sputter yield inherent to the ion–solid interactions. In addition, material contrast from electron-induced secondary electron (eSE) and backscattered electron (BSE) images using scanning electron microscopy (SEM) also shows non-monotonic contrast as a function of Z2, following the periodic behavior of the stopping power for electron–solid interactions. A comparison of the iSE and eSE results shows similar relative contrast between the metal layers, and not complementary contrast as conventionally understood. These similarities in the contrast behavior can be attributed to similarities in the periodic and non-monotonic function defined by incident particle–solid interaction theory. 相似文献
18.
This paper proposes a novel grading method of apples,in an automated grading device that uses convolutional neural networks to extract the size,color,texture,an... 相似文献
19.
分布动态载荷识别的抗噪处理 总被引:2,自引:2,他引:0
针对正交多项式频域法在用多种响应对矩形薄板进行载荷识别中抗噪性较差的问题,综合运用平均法、矩阵预处理和奇异值截断法等方法对之进行改善,并引入空间映射的思想,将该方法的应用范围拓展为复杂的模型.利用仿真算例,证实了该方法具有较好的抗噪性. 相似文献
20.
针对工程实践中环网通讯相关问题的处理缺乏理论基础及国产化安全级DCS平台的开发缺乏成熟经验借鉴问题,对基于MELTAC-N平台核电厂安全级DCS环网的软硬件实现进行了研究。提出了安全级DCS环网双环网冗余设计、光切换开关设计等硬件设计方法,以及以RPR协议为基础,采用全数据收发策略的软件设计方法。在CPR1000安全级DCS平台上对安全级DCS环网的可靠性及实时性进行了评价,并进行了容错能力、响应时间及响应时间稳定性测试验证实验。结果表明,基于MELTAC-N平台安全级DCS环网软硬件设计具有较好的容错能力及响应时间稳定性。 相似文献