High‐Performance Air‐Stable n‐Type Organic Transistors Based on Core‐Chlorinated Naphthalene Tetracarboxylic Diimides

Core‐chlorinated naphthalene tetracarboxylic diimides (NDIs) with fluoroalkyl chains are synthesized and employed for n‐channel organic thin‐film transistors (OTFTs). Structural analyses of the single crystals and thin films are performed and their charge‐transport behavior is investigated in terms of structure–property relationships. NDIs with two chlorine substituents are shown to exhibit a herringbone structure with a very close π‐plane distance (3.3–3.4 Å), a large π‐stack overlap (slipping angle ca. 62°), and high crystal densities (2.046–2.091 g cm^?3). These features result in excellent field‐effect mobilities of up to 1.43 cm² V^?1 s^?1 with minimal hysteresis and high on–off ratios (ca. 10⁷) in air. This is similar to the highest n‐channel mobilities in air reported so far. Despite the repulsive interactions of bulky Cl substituents, tetrachlorinated NDIs adopt a slip‐stacked face‐to‐face packing with an interplanar distance of around 3.4 Å, resulting in a high mobility (up to 0.44 cm² V^?1 s^?1). The air‐stability of dichlorinated NDIs is superior to that of tetrachlorinated NDIs, despite of their higher LUMO levels. This is closely related to the denser packing of the fluorocarbon chains of dichlorinated NDIs, which serves as a kinetic barrier to the diffusion of ambient oxidants. Interestingly, these NDIs show an optimal performance either on bare SiO₂ or on octadecyltrimethoxysilane (OTS)‐treated SiO₂, depending on the carbon number of the fluoroalkyl chains. Their synthetic simplicity and processing versatility combined with their high performance make these semiconductors highly promising for practical applications in flexible electronics.     

Effect of Non‐Chlorinated Mixed Solvents on Charge Transport and Morphology of Solution‐Processed Polymer Field‐Effect Transistors

Using non‐chlorinated solvents for polymer device fabrication is highly desirable to avoid the negative environmental and health effects of chlorinated solvents. Here, a non‐chlorinated mixed solvent system, composed by a mixture of tetrahydronaphthalene and p­‐xylene, is described for processing a high mobility donor‐acceptor fused thiophene‐diketopyrrolopyrrole copolymer (PTDPPTFT4) in thin film transistors. The effects of the use of a mixed solvent system on the device performance, e.g., charge transport, morphology, and molecular packing, are investigated. p‐Xylene is chosen to promote polymer aggregation in solution, while a higher boiling point solvent, tetrahydronaphthalene, is used to allow a longer evaporation time and better solubility, which further facilitates morphological tuning. By optimizing the ratio of the two solvents, the charge transport characteristics of the polymer semiconductor device are observed to significantly improve for polymer devices deposited by spin coating and solution shearing. Average charge carrier mobilities of 3.13 cm² V^?1 s^?1 and a maximum value as high as 3.94 cm² V^?1 s^?1 are obtained by solution shearing. The combination of non‐chlorinated mixed solvents and the solution shearing film deposition provide a practical and environmentally‐friendly approach to achieve high performance polymer transistor devices.     

Alkoxy‐Functionalized Thienyl‐Vinylene Polymers for Field‐Effect Transistors and All‐Polymer Solar Cells

π‐conjugated polymers based on the electron‐neutral alkoxy‐functionalized thienyl‐vinylene (TVTOEt) building‐block co‐polymerized, with either BDT (benzodithiophene) or T2 (dithiophene) donor blocks, or NDI (naphthalenediimide) as an acceptor block, are synthesized and characterized. The effect of BDT and NDI substituents (alkyl vs alkoxy or linear vs branched) on the polymer performance in organic thin film transistors (OTFTs) and all‐polymer organic photovoltaic (OPV) cells is reported. Co‐monomer selection and backbone functionalization substantially modifies the polymer MO energies, thin film morphology, and charge transport properties, as indicated by electrochemistry, optical spectroscopy, X‐ray diffraction, AFM, DFT calculations, and TFT response. When polymer P7 is used as an OPV acceptor with PTB7 as a donor, the corresponding blend yields TFTs with ambipolar mobilities of μ_e = 5.1 × 10^?3 cm² V^–1 s^–1 and μ_h = 3.9 × 10^?3 cm² V^–1 s^–1 in ambient, among the highest mobilities reported to date for all‐polymer bulk heterojunction TFTs, and all‐polymer solar cells with a power conversion efficiency (PCE) of 1.70%, the highest reported PCE to date for an NDI‐polymer acceptor system. The stable transport characteristics in ambient and promising solar cell performance make NDI‐type materials promising acceptors for all‐polymer solar cell applications.     

Simultaneous Modification of Bottom‐Contact Electrode and Dielectric Surfaces for Organic Thin‐Film Transistors Through Single‐Component Spin‐Cast Monolayers

An efficient process is developed by spin‐coating a single‐component, self‐assembled monolayer (SAM) to simultaneously modify the bottom‐contact electrode and dielectric surfaces of organic thin‐film transistors (OTFTs). This effi cient interface modifi cation is achieved using n‐alkyl phosphonic acid based SAMs to prime silver bottom‐contacts and hafnium oxide (HfO₂) dielectrics in low‐voltage OTFTs. Surface characterization using near edge X‐ray absorption fi ne structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, atomic force microscopy (AFM), and spectroscopic ellipsometry suggest this process yields structurally well‐defi ned phosphonate SAMs on both metal and oxide surfaces. Rational selection of the alkyl length of the SAM leads to greatly enhanced performance for both n‐channel (C₆₀) and p‐channel (pentacene) based OTFTs. Specifi cally, SAMs of n‐octylphos‐phonic acid (OPA) provide both low‐contact resistance at the bottom‐contact electrodes and excellent interfacial properties for compact semiconductor grain growth with high carrier mobilities. OTFTs based on OPA modifi ed silver electrode/HfO₂ dielectric bottom‐contact structures can be operated using < 3V with low contact resistance (down to 700 Ohm‐cm), low subthreshold swing (as low as 75 mV dec^?1), high on/off current ratios of 107, and charge carrier mobilities as high as 4.6 and 0.8 cm² V^?1 s^?1, for C60 and pentacene, respectively. These results demonstrate that this is a simple and efficient process for improving the performance of bottom‐contact OTFTs.     

Shift of the Branching Point of the Side‐Chain in Naphthalenediimide (NDI)‐Based Polymer for Enhanced Electron Mobility and All‐Polymer Solar Cell Performance

The branching point of the side‐chain of naphthalenediimide (NDI)‐based conjugated polymers is systematically controlled by incorporating four different side‐chains, i.e., 2‐hexyloctyl (P(NDI1‐T)), 3‐hexylnonyl (P(NDI2‐T)), 4‐hexyldecyl (P(NDI3‐T)), and 5‐hexylundecyl (P(NDI4‐T)). When the branching point is located farther away from the conjugated backbones, steric hindrance around the backbone is relaxed and the intermolecular interactions between the polymer chains become stronger, which promotes the formation of crystalline structures in thin film state. In particular, thermally annealed films of P(NDI3‐T) and P(NDI4‐T), which have branching points far away from the backbone, possess more‐developed bimodal structure along both the face‐on and edge‐on orientations. Consequently, the field‐effect electron mobilities of P(NDIm‐T) polymers are monotonically increased from 0.03 cm² V⁻¹ s⁻¹ in P(NDI1‐T) to 0.22 cm² V⁻¹ s⁻¹ in P(NDI4‐T), accompanied by reduced activation energy and contact resistance of the thin films. In addition, when the series of P(NDIm‐T) polymers is applied in all‐polymer solar cells (all‐PSCs) as electron acceptor, remarkably high‐power conversion efficiency of 7.1% is achieved along with enhanced current density in P(NDI3‐T)‐based all‐PSCs, which is mainly attributed to red‐shifted light absorption and enhanced electron‐transporting ability.     

Organic Thin‐Film Transistors: Simultaneous Modification of Bottom‐Contact Electrode and Dielectric Surfaces for Organic Thin‐Film Transistors Through Single‐Component Spin‐Cast Monolayers (Adv. Funct. Mater. 8/2011)

An efficient process is developed by spin‐coating a single‐component, self‐assembled monolayer (SAM) to simultaneously modify the bottom‐contact electrode and dielectric surfaces of organic thin‐film transistors (OTFTs). This effi cient interface modifi cation is achieved using n‐alkyl phosphonic acid based SAMs to prime silver bottom‐contacts and hafnium oxide (HfO₂) dielectrics in low‐voltage OTFTs. Surface characterization using near edge X‐ray absorption fi ne structure (NEXAFS) spectroscopy, X‐ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, atomic force microscopy (AFM), and spectroscopic ellipsometry suggest this process yields structurally well‐defi ned phosphonate SAMs on both metal and oxide surfaces. Rational selection of the alkyl length of the SAM leads to greatly enhanced performance for both n‐channel (C₆₀) and p‐channel (pentacene) based OTFTs. Specifi cally, SAMs of n‐octylphos‐phonic acid (OPA) provide both low‐contact resistance at the bottom‐contact electrodes and excellent interfacial properties for compact semiconductor grain growth with high carrier mobilities. OTFTs based on OPA modifi ed silver electrode/HfO₂ dielectric bottom‐contact structures can be operated using < 3V with low contact resistance (down to 700 Ohm‐cm), low subthreshold swing (as low as 75 mV dec^?1), high on/off current ratios of 107, and charge carrier mobilities as high as 4.6 and 0.8 cm² V^?1 s^?1, for C60 and pentacene, respectively. These results demonstrate that this is a simple and efficient process for improving the performance of bottom‐contact OTFTs.     

D‐A1‐D‐A2 Backbone Strategy for Benzobisthiadiazole Based n‐Channel Organic Transistors: Clarifying the Selenium‐Substitution Effect on the Molecular Packing and Charge Transport Properties in Electron‐Deficient Polymers

Unipolar n‐type semiconducting polymers based on the benzobisthiadiazole (BBT) unit and its heteroatom‐substituted derivatives are for the first time synthesized by the D‐A₁‐D‐A₂ polymer‐backbone design strategy. Selenium (Se) substitution is a very effective molecular design, but it has been seldom studied in n‐type polymers. In this study, within the similar conjugated framework, the Se substitution effects on the optical, electrochemical, solid‐state polymer packing, electron mobility, and air‐stability of the target unipolar n‐type polymers are unraveled. Replacing the sulfur (S) atom in the thiadiazole heterocycles with the Se atom leads to narrower bandgaps and deeper lowest unoccupied molecular orbital (LUMO) levels of the n‐type polymers. Furthermore, the Se‐substituted polymer (pSeN‐NDI) shows shorter lamellar packing distances and stronger edge‐on π–π stacking interactions than its S‐counterpart (pSN‐NDI), as observed by the two‐dimensional grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) patterns. With the deeper LUMO level and thin‐film microstructures suitable for transistors, pSeN‐NDI exhibits four‐fold higher electron mobilities (μ_e) than pSN‐NDI. However, the other Se‐containing polymer, pSeS‐NDI, forms rather amorphous film structures, which is caused by its limited thermal stability and decomposition during the thermal annealing processes, thus giving rise to a lower μ_e than its S‐counterpart (pBBT‐NDI). Most importantly, pBBT‐NDI demonstrates an electron mobility of 0.039 cm² V^?1 s^?1, which is noticeable among the unipolar n‐type polymers based on the BBT and its analogs.     

ε‐Branched Flexible Side Chain Substituted Diketopyrrolopyrrole‐Containing Polymers Designed for High Hole and Electron Mobilities

Based on the integrated consideration and engineering of both conjugated backbones and flexible side chains, solution‐processable polymeric semiconductors consisting of a diketopyrrolopyrrole (DPP) backbone and a finely modulated branching side chain (ε‐branched chain) are reported. The subtle change in the branching point from the backbone alters the π?π stacking and the lamellar distances between polymer backbones, which has a significant influence on the charge‐transport properties and in turn the performances of field‐effect transistors (FETs). In addition to their excellent electron mobilities (up to 2.25 cm² V^?1 s^?1), ultra‐high hole mobilities (up to 12.25 cm² V^?1 s^?1) with an on/off ratio (I_on/I_off) of at least 10⁶ are achieved in the FETs fabricated using the polymers. The developed polymers exhibit extraordinarily high electrical performance with both hole and electron mobilities superior to that of unipolar amorphous silicon.     

Engineering Molecular Organization of Naphthalenediimides: Large Nanosheets with Metallic Conductivity and Attoliter Containers

Molecular‐interaction‐induced organizations are the basis of various biological and nonbiological systems. The molecular recognition process involved in the formation of such systems is rather complicated, as it constitutes a subtle balance of various noncovalent interactions. The molecular organization of electron‐deficient aromatic systems is particularly appealing, as they are the potential candidates for a variety of applications. The main challenge in organizing aromatic moieties lies in controlling and optimizing the relatively strong π–π interactions by appropriate functionalization. Herein, we describe a simple molecular design involving phenylalanine methylester‐functionalized naphthalenediimide ( L ‐ NDI and D ‐ NDI ) to achieve high‐level molecular ordering by solution processing. NDIs are among the most promising organic n‐type semiconductors. However the molecular ordering of these organic entities determines their optimal functioning in an organic device. Highly crystalline free‐floating nanosheets with large lateral dimensions were obtained for the first time through molecularly engineered self‐assembly of L ‐ NDI and D ‐ NDI systems. Interestingly the nanosheets exhibit a remarkable conductivity of 1.6 S cm^?1. Furthermore the molecular organization of L ‐ NDI was tuned into container‐like complex architectures by employing chlorinated‐ co‐solvent‐mediated halogen bonding. The composition and the type of chlorinated co‐solvent resulted in the formation of nanocups, mesocups, and bowl‐like architectures. The nanocups possess a net volume of 0.1–1.5 attoliters (10^?18 L) and can be used as containers for miniaturized applications.     

High‐Performance Solution‐Processable Poly(p‐phenylene vinylene)s for Air‐Stable Organic Field‐Effect Transistors

The influence of the substitution pattern (unsymmetrical or symmetrical), the nature of the side chain (linear or branched), and the processing of several solution processable alkoxy‐substituted poly(p‐phenylene vinylene)s (PPVs) on the charge‐carrier mobility in organic field‐effect transistors (OFETs) is investigated. We have found the highest mobilities in a class of symmetrically substituted PPVs with linear alkyl chains (e.g., R¹, R² = n‐C₁₁H₂₃, R³ = n‐C₁₈H₃₇). We have shown that the mobility of these PPVs can be improved significantly up to values of 10^–2 cm² V^–1 s^–1 by annealing at 110 °C. In addition, these devices display an excellent stability in air and dark conditions. No change in the electrical performance is observed, even after storage for thirty days in humid air.     

Core‐Brominated Tetraazaperopyrenes as n‐Channel Semiconductors for Organic Complementary Circuits on Flexible Substrates

Organic thin‐film transistors (TFTs) are prepared by vacuum deposition and solution shearing of 2,9‐bis(perfluoroalkyl)‐substituted tetraazaperopyrenes (TAPPs) with bromine substituents at the aromatic core. The TAPP derivatives are synthesized by reacting known unsubstituted TAPPs with bromine in fuming sulphuric acid, and their electrochemical properties are studied in detail by cyclic voltammetry and modelled with density functional theory (DFT) methods. Lowest unoccupied molecular orbital (LUMO) energies and electron affinities indicate that the core‐brominated TAPPs should exhibit n‐channel semiconducting properties. Current‐voltage characteristics of the TFTs established electron mobilities of up to μ_n = 0.032 cm² V^?1 s^?1 for a derivative which was subsequently processed in the fabrication of a complementary ring oscillator on a flexible plastic substrate (PEN).     

Electroless‐Plated Gold Contacts for High‐Performance,Low Contact Resistance Organic Thin Film Transistors

Deposition of metallic electrodes on a semiconductor medium is an indispensable factor in governing carrier injection, and a metal/semiconductor contact that can be formed via solution process is highly desired in printed electronics. However, fine‐patterning the solution processes of metallic electrodes without damaging the excellent electronic properties of organic semiconductors (OSCs) is still a challenge. In this work, electroless plating, a metal coating technique that involves auto‐catalytic reaction in an aqueous solution, is used to fabricate top‐contact organic thin‐film transistors (OTFTs). An electroless‐plated gold pattern with a spatial resolution of 10 micrometers is transferred and laminated on a monolayer of OSCs to serve as a hole‐injection electrode. The fabricated OTFTs exhibit reasonably high field‐effect mobility of up to 13 cm² V^?1 s^?1 and decent contact resistance as low as 120 Ω · cm, which implies that an ideal metal/semiconductor contact can be realized. This electroless plating technique can provide possibilities for practical mass production of organic integrated circuits because it is in principle cost‐effective, capable of covering large areas, high‐vacuum free, and environmentally friendly.     

Solution‐Processed Small‐Molecule Bulk Heterojunction Ambipolar Transistors

Solution‐processed small‐molecule bulk heterojunction (BHJ) ambipolar organic thin‐film transistors are fabricated based on a combination of [2‐phenylbenzo[d,d']thieno[3,2‐b;4,5‐b']dithiophene (P‐BTDT) : 2‐(4‐n‐octylphenyl)benzo[d,d ']thieno[3,2‐b;4,5‐b']dithiophene (OP‐BTDT)] and C₆₀. Treating high electrical performance vacuum‐deposited P‐BTDT organic semiconductors with a newly developed solution‐processed organic semiconductor material, OP‐BTDT, in an optimized ratio yields a solution‐processed p‐channel organic semiconductor blend with carrier mobility as high as 0.65 cm² V^?1 s^?1. An optimized blending of P‐BTDT:OP‐BTDT with the n‐channel semiconductor, C₆₀, results in a BHJ ambipolar transistor with balanced carrier mobilities for holes and electrons of 0.03 and 0.02 cm² V^?1 s^?1, respectively. Furthermore, a complementary‐like inverter composed of two ambipolar thin‐film transistors is demonstrated, which achieves a gain of 115.     

Ambient‐Stable,Annealing‐Free,and Ambipolar Organic Field‐Effect Transistors Based on Solution‐Processable Poly(2,2′‐bis(trifluoromethyl)biphenyl‐alt‐2,5‐divinylthiophene) without Long Alkyl Side Chains

An ambipolar conjugated polymer CF₃‐PBTV, poly(2,2′‐bis(trifluoromethyl)biphenyl‐alt‐2,5‐divinylthiophene), consisting of thienylenevinylene as the donor and trifluoromethyl‐substituted biphenyl as the acceptor has been successfully synthesized. CF₃‐PBTV shows solution‐processability without electrically insulating long alkyl side chains. Grazing incidence X‐ray diffraction results suggest a nearly equal population of flat‐on and end‐on domains in CF₃‐PBTV thin film. The excellent ambipolarity of CF₃‐PBTV is demonstrated by well‐equivalent charge mobilities of 0.065 and 0.078 cm² V^?1 s^?1 for p‐ and n‐channel, respectively. The organic field‐effect transistors (OFET) also shows very high on/off ratio (≈10⁷) which is attributed to the relatively large bandgap and low‐lying highest occupied molecular orbital (HOMO) of CF₃‐PBTV. The OFET performance barely changes after the device is stored in ambient conditions for 90 days. The ambient‐stability is attributed to the enhanced oxidative stability from its low‐lying HOMO and the better moisture resistance from its fluorine contents. The performance of CF₃‐PBTV based OFET is annealing independent. It is noteworthy that the solution‐processable, ambipolar, and thienylenevinylene‐containing conjugated polymer without any long alkyl side chains is reported for the first time. And to the best of our knowledge, it is the first ambient‐stable, annealing‐free OFET with well‐equivalent ambipolarity.     

Solution‐Processable Dithienothiophenoquinoid (DTTQ) Structures for Ambient‐Stable n‐Channel Organic Field Effect Transistors

A series of dialkylated dithienothiophenoquinoids ( DTTQ s), end‐functionalized with dicyanomethylene units and substituted with different alkyl chains, are synthesized and characterized. Facile one‐pot synthesis of the dialkylated DTT core is achieved, which enables the efficient realization of DTTQ s as n‐type active semiconductors for solution‐processable organic field effect transistors (OFETs). The molecular structure of hexyl substituted DTTQ‐6 is determined via single‐crystal X‐ray diffraction, revealing DTTQ is a very planar core. The DTTQ cores form a “zig‐zag” linking layer and the layers stack in a “face‐to‐face” arrangement. The very planar core structure, short core stacking distance (3.30 Å), short intermolecular S? N distance (2.84 Å), and very low lying lowest unoccupied molecular orbital energy level of ?4.2 eV suggest that DTTQ s should be excellent electron transport candidates. The physical and electrochemical properties as well as OFETs performance and thin film morphologies of these new DTTQ s are systematically studied. Using a solution‐shearing method, DTTQ‐11 exhibits n‐channel transport with the highest mobility of up to 0.45 cm² V^?1 s^?1 and a current ON/OFF ratio (I _ON/I _OFF) greater than 10⁵. As such, DTTQ‐11 has the highest electron mobility of any DTT‐based small molecule semiconductors yet discovered combined with excellent ambient stability. Within this family, carrier mobility magnitudes are correlated with the alkyl chain length of the side chain substituents of DTTQ s.     

Spontaneous Phase Separation of Poly(3‐hexylthiophene)s with Different Regioregularity for a Stretchable Semiconducting Film

Highly regioregular (RR) poly(3‐hexylthiophene)s PHTs are known to exhibit excellent electrical properties in comparison to chemically identical but regiorandom (rr) PHTs. In this study, distinct RR (97% and 55%)‐graded PHTs are subjected to solution blending to spontaneously separate the high‐RR PHT chains from the low‐RR PHT media and develop highly conjugated nanodomains in both solution and film. In the spun‐cast blend films, the rr PHT matrix imparts sufficient deformability of the channel layer required for stretchable organic thin‐film transistors (OTFTs), compared to neat RR PHTs and blends with a deformable polymer. OTFTs including RR PHT/rr PHT blend films show excellent hole mobility (µ) values up to 0.13 cm² V^?1 s^?1, surpassing that of the best RR PHT films (0.026 cm² V^?1 s^?1) fabricated by ultrasound solution pretreatment. Furthermore, a 50% stretched RR PHT/rr PHT film maintains ≈55% of its µ value at no strain, while RR PHT films show a sudden decrease in µ even at 10% stretch. The simple blending approach imparts deformability to π‐conjugated polymer films for application in stretchable OTFTs.     

High‐Mobility Air‐Stable Naphthalene Diimide‐Based Copolymer Containing Extended π‐Conjugation for n‐Channel Organic Field Effect Transistors

A high‐performance naphthalene diimide (NDI)‐based conjugated polymer for use as the active layer of n‐channel organic field‐effect transistors (OFETs) is reported. The solution‐processable n‐channel polymer is systematically designed and synthesized with an alternating structure of long alkyl substituted‐NDI and thienylene–vinylene–thienylene units (PNDI‐TVT). The material has a well‐controlled molecular structure with an extended π‐conjugated backbone, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n‐type OFET. The top‐gate, bottom‐contact device shows remarkably high electron charge‐carrier mobility of up to 1.8 cm² V^?1 s^?1 (I_on/I_off = 10⁶) with the commonly used polymer dielectric, poly(methyl methacrylate) (PMMA). Moreover, PNDI‐TVT OFETs exhibit excellent air and operation stability. Such high device performance is attributed to improved π–π intermolecular interactions owing to the extended π‐conjugation, apart from the improved crystallinity and highly interdigitated lamellar structure caused by the extended π–π backbone and long alkyl groups.     

Transistor Paint: Environmentally Stable N‐alkyldithienopyrrole and Bithiazole‐Based Copolymer Thin‐Film Transistors Show Reproducible High Mobilities without Annealing

New solution processable 4‐(2‐hexyldecan)‐4H‐bisthieno[2,3‐d:3′,2′‐b]pyrrole and 4,4′‐dialkyl‐2,2′‐bithiazole‐based copolymers (PBTzDTPs) are synthesized with excellent FET performance. These novel copolymers have considerable potential in printable electronics as they have high charge carrier mobilities, excellent air stability, good solution processibility, and no requirement for post‐deposition thermal annealing, all requirements for this field of application. The thin film transistors fabricated from PBTzDTPs achieve field effect mobilities as high as 0.14 cm² V^?1 s^?1 with current on/off ratios up to 10⁶ without thermal annealing. In addition, the devices exhibit stable performance in air, showing no significant degradation over 60 days. Moreover, the polymers described here provide an excellent example of the systems in which higher mobility performance does not require higher crystalline, long‐range ordered structures. Such a system appears to be particularly promising for rapid fabrication techniques, where kinetic conditions usually prevent the development of long‐range order.     

Kinetically Controlled Crystallization in Conjugated Polymer Films for High‐Performance Organic Field‐Effect Transistors

Ordering of semiconducting polymers in thin films from the nano to microscale is strongly correlated with charge transport properties as well as organic field‐effect transistor performance. This paper reports a method to control nano to microscale ordering of poly{[N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)} (P(NDI2OD‐T2)) thin films by precisely regulating the solidification rate from the metastable state just before crystallization. The proposed simple but effective approach, kinetically controlled crystallization, achieves optimized P(NDI2OD‐T2) films with large polymer domains, long range ordered fibrillar structures, and molecular orientation preferable for electron transport leading to dramatic morphological changes in both polymer domain sizes at the micrometer scale and molecular packing structures at nanoscales. Structural changes significantly increase electron mobilities up to 3.43 ± 0.39 cm² V^?1 s^?1 with high reliability, almost two orders of enhancement compared with devices from naturally dried films. Small contact resistance is also obtained for electron injection (0.13 MΩ cm), low activation energy (62.51 meV), and narrow density of states distribution for electron transport in optimized thin films. It is believed that this study offers important insight into the crystallization of conjugated polymers that can be broadly applied to optimize the morphology of semiconducting polymer films for solution processed organic electronic devices.     

Ambipolar Charge Transport in Air‐Stable Polymer Blend Thin‐Film Transistors

Ambipolar thin‐film transistors based on a series of air‐stable, solution‐processed blends of an n‐type polymer poly(benzobisimidazobenzophenanthroline) (BBL) and a p‐type small molecule, copper phthalocyanine (CuPc) are demonstrated, where all fabrication and measurements are performed under ambient conditions. The hole mobilities are in the range of 6.0 × 10^–6 to 2.0 × 10^–4 cm² V^–1 s^–1 and electron mobilities are in the range of 2.0 × 10^–6 to 3.0 × 10^–5 cm² V^–1 s^–1, depending on the blend composition. UV‐vis spectroscopy and electron diffraction show crystallization of CuPc in the metastable α‐crystal form within the semicrystalline BBL matrix. These CuPc domains develop into elongated ribbon‐like crystalline nanostructures when the blend films are processed in methanol, but not when they are processed in water. On methylene chloride vapor annealing of the blend films, a phase transformation of CuPc from the α‐form to the β‐form is observed, as shown by optical absorption spectroscopy and electron diffraction. Ambipolar charge transport is only observed in the blend films where CuPc crystallized in the elongated ribbon‐like nanostructures (α‐form). Ambipolar behavior is not observed with CuPc in the β‐polymorph. Unipolar hole mobilities as high as 2.0 × 10^–3 cm² V^–1 s^–1 are observed in these solution‐processed blend field‐effect transistors (FETs) on prolonged treatment in methanol, comparable to previously reported hole mobilities in thermally evaporated CuPc FETs. These results show that ambipolar charge transport and carrier mobilities in multicomponent organic semiconductors are intricately related to the phase‐separated nanoscale and crystalline morphology.