A monolithic complexed catalyst composed of a piece of Co foam decorated with Ru nanosheets has been fabricated. This catalyst has demonstrated excellent performance in catalyzing NaBH4 hydrolysis under alkaline conditions. Most importantly, the bulky size of the developed catalyst provides convenience to control the start and stop of hydrogen production by manipulating the attachment and detachment between the catalyst and NaBH4 solution. These features endow this catalyst with great potential for on-site hydrogen supply.
Graphic AbstractIn this study, the porous ultrathin graphitic carbon nitride (CN) nanosheets with rich C and nitrogen defects were prepared by one-step calcining the mixture of melamine and glucose (Glu) in air atmosphere (Glu-CN). Introducing simultaneously rich C atoms and nitrogen defects into CN structures continuously modulates the bandgaps from 2.67 to 1.81 eV of CN photocatalysts. Due to large surface area, more active sites, remarkably longer lifetime of charge carriers and adjustable band gap structure, the prepared ultrathin porous CN nanosheets show the enhanced photocatalytic performance for the degradation of methyl orange (MO) under visible light. The degradation efficiency of optimal CN nanosheet photocatalyst for MO is 5.75 times that of bulk CN. This work provides a facile and universal relevance approach to engineer the band structures of CN by introduction of rich C and porous morphology for high-performance photocatalytic, which can provide informative principles for the design of efficient photocatalysis systems for solar energy conversion.
Graphic AbstractAn efficient solvent-free catalyst system for hydrosilylation of aldehydes and ketones was developed based on iron pre-catalyst Fe2(CO)9/C6H4-o-(NCH2PPh2)2BH. The reactions were tolerant of many functional groups and the corresponding alcohols were isolated in good to excellent yields following basic hydrolysis of the reaction products. The reaction is likely catalyzed by an in situ generated pincer ligated iron hydride complex.
Graphic AbstractThis work proposed a new path to synthesize Ni-phyllosilicate through the reaction of nickel hydroxide and silica sol on the surface of Ni-foam to form the monolithic Ni-phyllosilicate/Ni-foam catalyst. Ni-phyllosilicate could reprint the morphology of nickel hydroxid and firmly anchor on the framework of Ni-foam, which obtained fine Ni particles of 2.8 nm after reduction in H2 at 650 °C, resulting in high catalytic activity for CO2 methanation. In addition, the Ni-phyllosilicate/Ni-foam catalyst showed high long-term stability in a 100 h-lifetime test owing to the combined effects of surface confinement of Ni-phyllosilicate, firm anchoring between Ni-phyllosilicate and Ni-foam, as well as the high heat transfer property of Ni-foam.
Graphical AbstractMicro-mesoporous aluminosilicates based on ZSM-5 zeolite, obtained by a dual template method, as well as in the presence of a dual-functional template (i.e. a Gemini-type surfactant), were tested in the oxidation of furfural with hydrogen peroxide. Even substantial changes in acidity and porosity of the catalysts result in minor variations of selectivity towards the desired products. Application of the synthesized zeolite-based materials in the oxidation of furfural with hydrogen peroxide leads to formation of 2(5H)-furanone (yield up to 28.5%) and succinic acid (up to 19.5%) as the main C4 reaction products. The kinetic model developed previously to treat the results for oxidation of furfural over sulfated zirconia was able to describe the data also for micro-mesoporous aluminosilicates.
Graphical AbstractThe magic number clusters Au102(p-MBA)44 and Au144(p-MBA)60 were synthesized and tested for their ability to catalyze the reduction of 4-nitrophenol. Kinetic and thermodynamic analyses demonstrate that both clusters are effective catalysts with activation energies less than 10 kJ/mol and turnover frequencies approaching 103 h–1 per surface gold atom.
Graphic Abstract0D/2D Pt-C3N4/CdS heterojunction photocatalyst were fabricated with CdS quantum dots interspersed on g-C3N4 nanosheets via successive ionic layer absorption process. The obtained Pt-C3N4/CdS Z-scheme heterojunction with Pt cocatalyst deposited on g-C3N4 nanosheets exhibited H2 production rate of 35.3 mmol g?1 h?1, which is 3.1 times higher than that of Pt-CdS/C3N4. The enhanced photocatalytic activity are attributed to the Z-scheme charge carrier transfer mechanism with stronger redox ability. The photocatalytic mechanism of the CdS/g-C3N4 composite is investigated and demonstrated in this work. It may provide unique insights to design 0D/2D Z-scheme heterojunction photocatalyst systems using a facile method for highly efficient H2 production.
Graphic AbstractSchematic illustration of charge transfer modulated by the metal cocatalyst selective deposition on heterojunction-type II (a) and direct Z-Scheme mechanisms (b) over the C3N4/CdS heterostructure composites under visible light irradiation.
The statistical selectivity models were developed for four different Fischer–Tropsch synthesis product range, including methane (CH4), light olefins (C2=C4), light paraffins (C2–C4), and long-chain hydrocarbons (C5+), based on the experimental data obtained over thirteen γ-Al2O3 supported cobalt-based catalysts with different cobalt particle and pore sizes. The input variables consist of cobalt metal particle size and catalyst pore size. The cubic and quadratic polynomial equations were fitted to the experimental data, however, the mathematical models were subjected to model reduction for the enhancement of model adequacy, which was investigated through ANOVA. The multi-objective optimization revealed that the maximum C5+?selectivity (84.150%) could be achieved at the cobalt particle size and pore sizes of 14.764 and 23.129 nm, respectively, while keeping the selectivity to other hydrocarbon products minimum.
Graphic AbstractIn this study, g-C3N4-TiO2 nanocomposite structure has been loaded with Co3O4 via electroless plating and thermal annealing to form Co3O4@g-C3N4-TiO2 catalyst material for H2 generation from NaBH4 hydrolysis. The material characterizations of the fabricated catalyst have been performed before and after exposure to an aqueous NaBH4 solution to understand the changes in catalytic performance and material properties. The Arrhenius activation energies have been determined to be 58 kJ mol?1. The hydrogen generation rates have been observed as 180 and 1200 mL min?1 gcat?1 for the catalyst hydrolysis of NaBH4 at 30 °C and 60 °C, respectively. The catalytic activity performed in NaBH4 solution exhibited good reusability.
Graphical AbstractAchieving the removal of the toxic nitric oxide (NO) gas efficiently and cheaply has always been a challenge. Herein, we systematically investigate the reduction mechanisms of NO on the surface of the Fe–PCs (PCs?=?phthalocyanines) using density functional theory calculations. The isolated iron atom not only plays the role of an adsorption and activation site for the NO molecule but also works as an electron transfer medium in the whole reaction process. The results indicate that the catalytic reduction of NO to N2 takes place through a continuous two-step pathway. The first step involves the reduction of NO to N2O through a competitive Langmuir–Hinshelwood and Eley–Rideal mechanisms with the energy barrier of 1.19 eV and 0.60 eV, respectively. The second step involves the reduction of N2O to N2 with an energy barrier of 0.91 eV. These reaction pathways are favorable thermodynamically, thus the Fe–PCs catalyst is a promising candidate for the abatement of NO gases.
Graphic AbstractAlthough numerous efforts have been made in direct syngas conversion to higher alcohols via Fischer–Tropsch synthesis, the higher alcohols distribution remains a challenge. Here, we introduce alkaline earth metal oxide as promoter into activated carbon supported cobalt catalyst to tune distribution of higher alcohols. With the addition of Mg, the distribution of C2-5 alcohols increase from 41.2 to 75.8% accompanying with distribution of C6-18 alcohols decrease from 52.8 to 14.0%. Ba-promoted Co based catalyst (CoBa/AC) presents similar alcohols distribution to un-promoted catalyst, while the alcohol selectivity over CoBa/AC is higher than Co/AC. For promoted catalysts, the distribution of C6-18 alcohols increased in the order of Mg?<?Ca?<?Sr?<?Ba. The characterization results exhibit that the promoter addition facilitates the cobalt carbide formation, which leads to enhancement of selectivity to higher alcohols. The available active cobalt sites of promoted Co based catalysts increase in the same above order of Mg?<?Ca?<?Sr?<?Ba.
Graphic AbstractCuO–CeO2 (Cu–Ce) catalyst with a CuO/CeO2 mass ratio of 1 prepared by a sol–gel method is used in the CO catalytic oxidation reaction in the actual industrial sulfur-containing atmosphere. At a reaction temperature of 200 °C, the catalyst exhibits quite different stability under sulfur-containing and sulfur-free conditions. When 30 ppm SO2 was added to the feed gas, the Cu–Ce catalyst had an initial CO conversion rate of 100%, gradually decreasing after 26 h, and this catalyst completely deactivated at about 50 h. However, the CO conversion rate of the catalyst under sulfur-free conditions could be nearly maintained at 100% within the measured time range (60 h). The results of IR, Raman, and XPS characterizations proved that the accumulation of cerium sulfate on the Cu–Ce catalyst would cover the active sites of the catalyst, eventually leading to the complete deactivation of the catalyst, which provides favorable evidence for the actual industrial anti-sulfur application.
Graphical AbstractAPO-11 aluminophosphate molecular sieve was prepared by hydrothermal method of aluminum hydroxide with diisopropylamine. Ni–P/APO-11 amorphous alloy catalysts were prepared by chemical reduction method and used for the hydrogenation of α-pinene reaction. The catalysts were characterized by X-Ray photoelectron spectroscopy (XPS), Nitrogen adsorption–desorption isotherms (BET), scanning electron microscope (SEM), transmission electron microscope (TEM) and fourier transform infrared spectrometer (FT-IR).The prepared conditions of the Ni–P/APO-11 catalysts played important roles on the hydrogenation of α-pinene reaction. It was found that the preparation temperature, P/Ni molar ratio and pH value had great influence on the reduction dosage, dispersion and particle sizes of the catalysts, thus affecting the reactivity of the catalysts. The appropriate reaction conditions explored were at 30 °C, n(P/Ni)?=?5 and pH?=?8, obtaining a 90.65% conversion of α-pinene and 97.87% selectivity to cis-pinane. Under these conditions, the catalysts exhibited better repeatability and stability.
Graphic AbstractIn this paper, we have produced carboxylic acids by the oxidation of various alcohols in the presence of CO2 using SBA-15/IL supported Cu(II) (SBA-15/IL/Cu(II)) as nanocatalyst. The obtained products showed to have excellent yields by taking into account of SBA-15/IL/Cu(II) nanocatalyst. In addition, the analysis of EDX, SEM, TGA, TEM, XPS, and FT-IR showed the heterogeneous structure of SBA-15/IL/Cu (II) catalyst. It is determined that, after using SBA-15 excess, the catalytic stability of the system was enhanced. Moreover, hot filtration provided a full vision in the heterogeneous catalyst nature. The recycling as well as reuse of the catalyst were studied in cases of coupling reactions many times. Moreover, we have studied the mechanism of the coupling reactions.
Graphic AbstractThis work addresses the reduction of NOx by H2 under O2-rich conditions using Al2O3/SiO2-supported Pt catalysts with different loads of WOx promotor. The samples were thoroughly characterised by N2 physisorption, temperature-programmed desorption of CO, scanning electron microscopy, X-ray diffraction, laser raman spectroscopy, X-ray photoelectron spectroscopy and diffuse reflectance infrared fourier transform spectroscopy with probe molecule CO. The catalytic studies of the samples without WOx showed pronounced NOx conversion below 200 °C, whereas highest efficiency was related to small Pt particles. The introduction of WOx provided increasing deNOx activity as well as N2 selectivity. This promoting effect was referred to an additional reaction path at the Pt-WOx/Al2O3/SiO2 interface, whereas an electronic activation of Pt by strong metal support interaction was excluded.
Graphic AbstractIn order to further improve the catalytic activity and stability of heterogeneous acid catalysts, a polystyrene microspheres modified sulfonic acid-based catalyst (PS-SO3H) was prepared. PS-SO3H was characterized by Fourier transform infrared spectroscopy, powder X-ray diffraction, scanning electron microscope, transmission electron microscope, N2 adsorption–desorption, and X-ray photoelectron spectroscopy. Catalytic efficiency was determined using the reaction of furfuryl alcoholysis to ethyl levulinate (EL). The obtained results showed that PS-SO3H had excellent catalytic performance, with EL yield of 94.7%. In addition, PS-SO3H was easily separated from the reaction system and recycled multiple times without significant reduction in activity. High catalytic activity stemmed from the effect of Brønsted acid sites and appropriate structural properties.
Graphical AbstractIn this work, density functional theory is used to study the mechanism of propane dehydrogenation over non-metallic C3N catalyst. The structure, electrostatic potential and density of state of C3N are introduced, as well as the adsorption of reactants on catalyst is studied. The propane dehydrogenation reaction is divided into the first dehydrogenation and the second dehydrogenation (deep dehydrogenation). We explore the possible dehydrogenation pathways in two-step dehydrogenation. The rate control step of the first dehydrogenation is the removal of methylene hydrogen atom from propane, and its energy barrier is 47.79 kcal/mol, which reflected the catalytic activity of the catalyst. The rate control step of deep dehydrogenation is the process of removing the first hydrogen atom of the product propylene to produce the by-product. The energy barrier is 72.80 kcal/mol, which is much larger than that of the first step of dehydrogenation, reflecting the excellent selectivity of the catalyst.
Graphic AbstractIn this study, we describe the synthetic of uranyl nitrate ion functionalized MOFs linked by carboxyl, which displays block shape crystals structure. The as-prepared uranyl-MOF has been efficiently utilized as heterogeneous catalyst for selective aerobic oxidation of sulfides under visible-light irradiation. Photochemistry of extended MOFs including uranyl nitrate ion has been examined. The sulfoxidation reaction proceeds with good yields for a large variety of different sulfides. This process is carried out under visible light conditions, methanol as single solvent, and the uranyl-MOF material can be recycled up to five times. Sulfoxidation reaction mainly proceeds through an electron and energy transfer mechanism of oxygen in uranyl nitrate ion.
Graphic AbstractIn this study, we describe the synthetic of uranyl nitrate ion functionalized MOFs. The as-prepared uranyl-MOF was efficiently utilized as heterogeneous catalyst for selective aerobic oxidation of sulfides under visible-light irradiation. Photochemistry of extended MOFs including uranyl nitrate ion has been examined.
Regularly dispersed Pt particles on SBA-15 supported catalysts were synthesized with a Pt loading of 5 wt% by a sol-immobilisation method, wherein various Pt particle sizes within 1–5 nm were finely controlled via the adjustment of the addition amount of polyvinyl alcohol (PVA). A high PVA/Pt ratio of the initial solution tended to generate small Pt particles on the SBA-15 support due to intense protection against Pt particle aggregation. In addition, the effect of Pt particle size on naphthalene hydrogenation was investigated in terms of catalytic performance. Compared with the performance of other catalysts with Pt particle sizes greater or less than 3.5 nm, Pt nanoparticles with sizes centered at 3.5 nm exhibited excellent catalytic performance towards decalin. This excellent catalytic performance was mainly attributed to a suitable ratio of the edge sites to flat sites on these Pt nanoparticles, benefitting the rapid adsorption of naphthalene and dissociation of hydrogen.
Graphical AbstractThe Pt/SBA-15 catalysts were prepared by sol-immobilisation method. The highest performance was attributed to the Pt-nanoparticles with suitable flat/edge sites ratio.
Lignocellulosic biofuels are the most promising sustainable fuels for supplementing shrinking fossil resources. In this work, acid-modified vermiculite (AVM)-supported Pd–Ni bimetallic catalyst (Pd–Ni/AVM) was investigated for the hydrodeoxygenation of bio-oil and its model compounds to assess its reactivity. Pd–Ni/AVM was found to efficiently hydrodeoxygenate the investigated model compound (phenol). The phenol conversion reached 94% at 0.5% of Ni loading and temperatures beyond 513 K. Using these parameters, the phenolic hydroxyl group was removed, and the C?=?C bonds were saturated. This catalyst was also efficient in the hydrodeoxygenation of bio-oil. H2-TPR experiments elucidated the synergistic effects between the active component and the carrier, which were considered the main reason for the catalytic activity. Strong influences of the Ni loading and temperature on the hydrogenation of phenol were also observed when the Pd loading was fixed at 1 wt%.
Graphic Abstract