Morphotectonic analysis of Kosi River basin in Kumaun Lesser Himalaya: an evidence of neotectonics

The Himalayan arc is one of the prominent sites on Earth, for ongoing research on active tectonics because of the frequent occurrence of earthquakes of low-moderate intensity that occur in various sectors of the region. The present study is an attempt to decipher the active uplift and relative tectonic activity in Kosi River basin, a part of the southern Kumaun Himalayas. Several morphotectonic parameters such as asymmetry factor (AF), hypsometric integral (HI), mountain front sinuosity (S_mf), channel sinuosity (S), and basin elongation ratio (R_e) have been calculated with an objective to compare different sub-basins in the Kosi watershed that may prove useful in deciphering of relative tectonic activity. The watershed delineation of the Kosi River basin as well as its sub-basins, and detailed drainage network has been accomplished by using the CARTOSAT-1 DEM with the help of ArcGIS 10.3 software, using TauDEM tool and Global Mapper 18. Analysis of these morphotectonic parameters reveals that although the whole of the Kosi River basin lies in the seismically active zone, but the northern part along North Almora Thrust (NAT), central part around South Almora Thrust (SAT), Ramgarh Thrust (RT), and southern part along Himalayan Frontal Thrust (HFT) are tectonically more active and undergoing neotectonic rejuvenation. The information derived would prove beneficial in identification of hazard prone areas and in planning of socio-economic development in mountainous terrain.     

http://www.sciencedirect.com/science/article/pii/S1674987111001265

Landscapes in tectonically active Hindu Kush（NW Pakistan and NE Afghanistan） result from a complex integration of the effects of vertical and horizontal crustal block motions as well as erosion and deposition processes.Active tectonics in this region have greatly influenced the drainage system and geomorphic expressions.The study area is a junction of three important mountain ranges （Hindu Kush-Karakorum-Himalayas） and is thus an ideal natural laboratory to investigate the relative tectonic activity resulting from the India-Eurasia collision.We evaluate active tectonics using DEM derived drainage network and geomorphic indices hypsometric integral（HI）,stream-length gradient （SL）.fractal dimension（FD）.basin asymmetry factor（AF）.basin shape index（B_s）,valley floor width to valley height ratio（Vf） and mountain front sinuosity(S_mf). The results obtained from these indices were combined to yield an index of relative active tectonics （IRAT） using CIS.The average of the seven measured geomorphic indices was used to evaluate the distribution of relative tectonic activity in the study area.We defined four classes to define the degree of relative tectonic activity:class 1 very high（1.0≤IRAT 1.3）;class 2-high（1.3≥IRAT<1.3）:class 3—moderate（1.5≥IRAT<1.8）;and class 4—low（l.8≥1RAT）.In view of the results.we conclude that this combinetl approach allows the identification of the highly deformed areas related to active tectonics.Landsat imagery and held observations also evidence the presence of active tectonics based on the dellected streams,deformed landforms.active mountain fronts and triangular facets.The indicative values of IRAT are consistent with the areas of known relative uplift rates,landforms and geology.     

基于DEM的活动构造研究

地形地貌参数指标是分析区域活动构造的有力工具。本文以渭河上游流域的活动构造研究为例,通过提取地貌的参数指标,如面积-高程积分(Hi)、流域盆地不对称度(AF)、山前曲折度(Smf)以及谷底宽度与谷肩高度的比值(Vf)、盆地形状指数(Bs)等,然后对地貌参数指标等级进行算术平均化(S/n),可得到区域的相对构造活动程度(Iat),分为:低、中等、高、较高四类等级。研究认为渭河上游流域的构造活动程度相对高(Iat=1.50),这种方法对探讨整个区域活动构造的差异性具有很好的效果和意义。     

DEM and GIS analysis of sub-watersheds to evaluate relative tectonic activity. A case study of the North–south axis (Central Tunisia)

Morphotectonic analysis using geomorphic indexes has been developed as a basic tool to identify recent tectonic deformation in specific areas.This study was undertaken to develop an integrated quantitative geomorphic analysis of tectonic activity in the North–south axis, central of Tunisia. Different geomorphic indexes, including elongation ratio (E), drainage basin asymmetry (Af), hypsometric integral (Hi), Valley floor width-to-height ratio (Vf), mountain front sinuosity (Smf), and stream length gradient index (SL) were calculated. The relationships between the calculated indexes, their correlations and their significance (based on p-values) were also investigated.. Using the hierarchical cluster analysis based on Ward’s method, these indexes were classified into three classes describing the relative, different effect of tectonics in each fault segment. The higher deformation is concentrated in the NE-SW Boudinar fault, followed, in order of decreasing activity, by Goubrar, Gouleb, and Majoura normal faults. This pattern of variation in the relative degree of tectonic activity is consistent with field evidence.     

Appraisal of relative tectonic activity along the Kazerun Fault Zone,Zagros Mountains,Iran: insight from spatial analysis of geomorphic indices

This paper investigates the impact of active tectonics on the geomorphic processes and landscape evolution along the Kazerun Fault Zone (KFZ) in the Zagros Mountains of Iran using spatial analysis of geomorphic indices. We document how topography and morphology are influenced by active tectonic deformation. The Zagros fold–thrust belt is an area of active crustal shortening where northwest–southeast oriented fault‐related folds become younger from north to south and from southeast to northwest. This temporal and spatial evolution of the belt was tested using geomorphic indices of active tectonics that include mountain front sinuosity index (Smf), the valley width/height ratio (Vf), drainage basin asymmetry factor, hypsometric integral, drainage basin shape ratio and mean axial slope of the channel. Change in the geomorphic indices is the result of active fold growth and change in the uplift rate. Decreasing Smf and Vf values from north (Smf = 2.01; Vf = 0.5) to south (Smf = 1.12; Vf = 0.2) and from southeast (Smf = 1.84; Vf = 0.8) to northwest (Smf = 1.54; Vf = 0.1) points to a migration of the active crustal shortening towards W–SW. The combined geomorphic (field evidences) and morphometric data (quantitative analysis of geomorphic indices) provide evidence of relative variation in the tectonic activity along the Kazerun Fault Zone and related landforms. The utilization of geomorphic parameters with comparison to the field observations exhibits change in relative tectonic activities mostly corresponding to the change in mechanism of the prominent fault zones in the study area. Copyright © 2014 John Wiley & Sons, Ltd.     

Active tectonics of Himalayan Frontal Fault system

In the Sub-Himalayan zone, the frontal Siwalik range abuts against the alluvial plain with an abrupt physiographic break along the Himalayan Frontal Thrust (HFT), defining the present-day tectonic boundary between the Indian plate and the Himalayan orogenic prism. The frontal Siwalik range is characterized by large active anticline structures, which were developed as fault propagation and fault-bend folds in the hanging wall of the HFT. Fault scarps showing surface ruptures and offsets observed in excavated trenches indicate that the HFT is active. South of the HFT, the piedmont zone shows incipient growth of structures, drainage modification, and 2–3 geomorphic depositional surfaces. In the hinterland between the HFT and the MBT, reactivation and out-of-sequence faulting displace Late Quaternary–Holocene sediments. Geodetic measurements across the Himalaya indicate a ~100-km-wide zone, underlain by the Main Himalayan Thrust (MHT), between the HFT and the main microseismicity belt to north is locked. The bulk of shortening, 15–20 mm/year, is consumed aseismically at mid-crustal depth through ductile by creep. Assuming the wedge model, reactivation of the hinterland faults may represent deformation prior to wedge attaining critical taper. The earthquake surface ruptures, ≥240 km in length, interpreted on the Himalayan mountain front through paleoseismology imply reactivation of the HFT and may suggest foreland propagation of the thrust belt.     

Tectonic geomorphology of the easternmost extension of the Gulf of Corinth (Beotia, Central Greece)

The easternmost sector of the Gulf of Corinth, the Beotia area in Central Greece, is an area with active normal faults located between the two major rift structures of Central Greece, the Gulf of Corinth and the North Gulf of Evia. These active normal faults include WNW to E–W and NE to ENE-trending faults affect the landscape and generate basin and range topography within the Beotia. We study four normal fault zones and drainage basin geometry in the easternmost sector of the Gulf of Corinth to document the impact of active tectonics on the landscape evolution. Fault and drainage geometry are investigated based on detailed field mapping and high-resolution digital elevation models. Tectonic geomorphic analysis using several parameters of active tectonics provides information concerning the relative tectonic activity and fault growth. In order to detect areas of lateral stream migration that could indicate recent tectonic activity, the Transverse Topographic Symmetry Factor and the Asymmetry Factor are used to analyse drainage basin geometry in six large drainage basins and a drainage domain covering the study area. Our results show that vertical motions and tilting associated with normal faulting influence the drainage geometry and its development. Values of stream-gradient indices (S_L) are relatively high close to the fault traces of the studied fault zones suggesting high activity. Mountain-front sinuosity (S_mf) mean values along the fault zones ranges from 1.08 to 1.26. Valley floor width to valley height ratios (V_f) mean values along the studied fault zones range between 0.5 and 1.6. Drainage basin shape (B_S) mean values along the fault zones range from 1.08 to 3.54. All these geomorphic parameters and geomorphological data suggest that the analyzed normal faults are highly active. Lateral fault growth was likely produced by primarily eastward propagation, with the WNW to E–W trending faults being the relatively more active structures.     

Morphotectonic analysis of alluvial fan dynamics: comparative study in spatio-temporal scale of Himalayan foothill,India

Alluvial fan is a depositional fluvial landform that is characterised by sediment flow and hydrological processes and is also controlled by tectonic activity. These extraordinary features have always attracted researchers since the past as they preserve the past records, but now, this study is focused on the formation meso-level fans with its spatio-temporal dynamic nature. These tributaries have formed secondary alluvial fans at their debouching points. The dynamics of the fans are controlled by the hydrological responses and tectonic base and also by the sedimentation processes. The origin of these tributaries and their respective fans are related to the last stage of Himalayan uplift. This is the region of Himalayan foreland basin which contains the main frontal thrust and makes the region tectonically very active. The region is drained by many large rivers and their numerous tributaries. The active tectonism, the configuration of the basin and also the deposition of the sediments carried by these rivers have formed alluvial fans where the channel debouches into the widened valley. In the present study, the meso-level alluvial fans formed by River Gish and the Rivers Neora and Murti have been studied. Both these fans are present in the piedmont region of the Himalayas, but they deliver different characteristics, and the nature of their deposition is also different. This is mainly because of the influence of the minor faults in the region which control the channel pattern and also have a great influence in the sediment delivery to the downstream section of the channels. Thus, in order to understand the influence of tectonics in the dynamics of these fans, some morphotectonic parameters have been taken into consideration. These include mountain front sinuosity index, valley floor width-to-depth ratio, and tectonic tilt. The calculated hypsometric integral also depicts that the two fans are at different stages of development.     

The effects of the North Anatolian Fault on the geomorphology in the Eastern Marmara Region,Northwestern Turkey

North-western Anatolia has been actively deformed since Pliocene by the right-lateral North Anatolian Fault (NAF). This transform fault, which has a transtensional character in its western end due to effects from the Aegean extensional system, is a major control on the regional geomorphologic evolution. This study applied some geomorphic analyses, such as stream longitudinal profiles, stream length-gradient index, ratio of valley floor width and valley height, mountain front sinuosity, hypsometry and asymmetry factor analyses, to an area just east of the Sea of Marmara in order to understand the tectonic effects on the area’s geomorphological evolution. The active and fastest northern branch of the NAF lies within a topographic depression connecting Sea of Marmara in the east to the Adapazar? Basin in the west. This depression filled with early Pleistocene and younger sediment after a series of pull-apart basins opened along the NAF. North of this depression lies the Kocaeli Peneplain, whose southern edge the NAF uplifted. Meandering streams on the central peneplain were incised possibly due to baselevel changes in the Black Sea. South of the depression, an E-trending mountainous area has a rugged morphology. Based on geomorphic analyses, uplifted Pliocene sediment, marine terraces, and recent earthquake activity, this area between northern and southern branches of the NAF is actively uplifting. The geomorphic indices used in this study are sensitive to vertical movements rather than lateral ones. The bedrock lithology that played an important role on the area’s geomorphologic evolution also affects the geomorphic indices used here.     

Tectonic morphometric studies as a tool for terrain characterization in the Himalayan foothill region — A case study

The Himalayan foothill region is traversed by the Main Boundary Thrust, the Himalayan Frontal Thrust and the Piedmont Fault which make the entire densely populated foothill region vulnerable to seismic damages. Tectonic morphometric studies of selected active tectonic indices in conjunction with analysis of multispectral satellite imagery of the foothill terrain from North of Chandigarh to West of Dehradun have revealed the presence of two major active faults. The Jainti Devi Fault, in the vicinity of Chandigarh, has offset nearly all the drainage channels by about 780 m while the Trilokpur Fault, in the vicinity of Nahan, has offset the streams and rivulets by about 1500 m. The values of ratio of valley floor width to valley height, the stream length gradient index, stream sinuosity index and mountain front sinuosity index have been computed and these reaffirm the active tectonic setup of the foothill terrain. The digital terrain model and field investigations reveal the presence of offset streams, sag ponds, linear valleys, shutter ridges and pressure ridges along the fault trace. Trenching carried out in the region has revealed the presence of numerous seismites.     

Tectonic geomorphology of the Kemalpaşa Basin and surrounding horsts,southwestern part of the Gediz Graben,Western Anatolia

The Kemalpa?a Basin is one of the Quaternary basins in Western Anatolia and represents the south-western branch of the Gediz Graben system in this extensional province. This basin has been formed under the NNE–SSW trending extensional tectonic regime. It is bounded by a major fault, the Kemalpa?a Fault, in the south and it is bounded by a number of downstepping faults, called as Spilda?? Fault Zone, in the north. Both margin-bounding faults of the Kemalpa?a Basin are oblique-slip normal faults. In order to better understand the activities of these faults, we investigated the tectonic geomorphology of the Kemalpa?a Basin and interpreted the effect of tectonic activity on the geomorphological evolution using geomorphic markers such as drainage basin patterns, facet geometries and morphometric indices such as hypsometric curves and integral (HI), basin shape index (B_s), valley floor width-to-height ratio (V_f) and mountain front sinuosity (S_mf). The morphometric analysis of 30 drainage basins in total and mountain fronts bounding the basin from both sides suggests a relatively high degree of tectonic activity. The mountain front sinuosity (S_mf) generally varies from 1.1 to 1.3 in both sides of the basin suggesting the active fronts and facet slopes (12°–32°) suggest a relatively high degree of activity along the both sides of the Kemalpa?a Basin. Similarly, the valley floor width-to-height ratios (V_f) obtained from the both sides indicate low values varying from 0.043 to 0.92, which are typical values (<1) for tectonically active mountain fronts. The all values obtained are lower for the southern side. Therefore, we suggest that the tectonic activity of the Kemalpa?a Fault higher than the Spilda?? Fault Zone. This difference that can be arised from the different uplift rates also reveals the typical asymmetric characteristics of the Kemalpa?a Basin. Additionally, the trapezoidal facets which have been observed on the southern side of the basin indicate that the Kemalpa?a Fault is evolutionally more active as compared to the Spilda?? Fault Zone. The geomorphic indices indicate that the Quaternary landscape evolution of the Kemalpa?a Basin was governed by tectonic and erosional processes, and also the all results of morphometric analysis suggest a relatively high degree of tectonic activity along the faults bounding the Kemalpa?a Basin. Moreover, considering that active large normal faults with an average 15 km long can cause major earthquake, the earthquake hazard in the Kemalpa?a Basin should be investigated in detailed paleoseismological studies.     

Evaluation of relative tectonic activity of Buin Zahra-Avaj area,northern Iran

Present active tectonics is affecting central Alborz and created various dynamic landforms in Buin Zahra-Avaj area, northern Iran. The area, located between the southern central Alborz and the edge of northwestern central Iran, is the result of both the Arabian–Eurasian convergence and clockwise rotation of the south Caspian Basin with respect to Eurasia in which most of the steep fault planes have a left lateral strike-slip component and most of the dip-slip faults are reverse, dipping SW. Since this region consists of several residential and industrial areas and includes several fault zones, the assessment of the structures of the present activity is vital. Six significant morphometric indices have been applied for this evaluation including stream length–gradient (SL), drainage basin asymmetry factor (Af), hypsometric integral (Hi), ratio of valley floor width to valley height (Vf), drainage basin shape (Bs), and mountain front sinuosity (Smf). The combined analyzed indices, represented through the relative tectonic activity (Iat), were used. The study area was divided into four regions according to the values of Iat. These classes include class 1 (very high activity,18%), class 2 (high, 20%), class 3 (moderate, 44%), and class 4 (low, 18%). The results of these indices are consistent with field observations on landforms and the deformation of Quaternary deposits.     

Active tectonic influence on the evolution of drainage and landscape: Geomorphic signatures from frontal and hinterland areas along the Northwestern Himalaya, India

The Kangra Re-entrant in the NW Himalaya is one of the most seismically active regions, falling into Seismic Zone V along the Himalaya. In 1905 the area experienced one of the great Himalayan earthquakes with magnitude 7.8. The frontal fault system – the Himalayan Frontal Thrust (HFT) associated with the foreland fold – Janauri Anticline, along with other major as well as secondary hinterland thrust faults, provides an ideal site to study the ongoing tectonic activity which has influenced the evolution of drainage and landscape in the region. The present study suggests that the flat-uplifted surface in the central portion of the Janauri Anticline represents the paleo-exit of the Sutlej River. It is suggested that initially when the tectonic activity propagated southward along the HFT the Janauri Anticline grew along two separate fault segments (north and south faults), the gap between these two fault and the related folds allowed the Sutlej River to flow across this area. Later, the radial propagation of the faults towards each other resulted in an interaction of the fault tips, which caused the rapid uplift of the area. Rapid uplift resulted in the disruption and longitudinal deflection of the Sutlej river channel. Fluvial deposits on the flat surface suggest that an earlier fluvial system flowed across this area in the recent past. Geomorphic signatures, like the sharp mountain fronts along the HFT in some places, as well as along various hinterland subordinate faults like the Nalagarh Thrust (NaT), the Barsar Thrust (BaT) and the Jawalamukhi Thrust (JMT); the change in the channel pattern, marked by a tight incised meander of the Beas channel upstream of the JMT indicate active tectonic movements in the area. The prominent V-shaped valleys of the Beas and Sutlej rivers, flowing across the thrust fronts, with Vf values ranging from <1.0–1.5 are also suggestive of ongoing tectonic activity along major and hinterland faults. This suggests that not only is the HFT system active, but also the other major and secondary hinterland faults, viz. the MBT, MCT, SnT, NaT, BaT, and the JMT can be shown to have undergone recent tectonic displacement.     

Extensional tectonic activity in the cratonward parts (peripheral bulge) of the Ganga Plain foreland basin,India

Flexural subsidence of the Indian lithosphere created the foreland basin in front of the emerging Himalayan mountain belt. The continued northward push of the Indian plate and thrust sheet loading in the Himalayan orogen caused an up-warping along its cratonward margin, in the form of a regional gentle bulge. In the cratonward peripheral bulge small-scale to moderate size deformation features, e.g., gentle folds (up-arching of the sediment layers), extensional normal faults and uplifted tilted blocks, and incised river channels with 20-60-m-high cliffs, developed. Cliff sections of many rivers in this cratonward part of the foreland basin expose deposits of latest Pleistocene-Holocene age and show evidences of active tectonics in the last few thousand years: vertical uplift leading to deep incision of the river system, development of prominent fractures cutting through the sedimentary succession, bending and tilting of the strata, and tilted blocks. In the Late Quaternary relaxation phase of the Himalayan orogen-foreland, there is increased vertical tectonic activity in the region of the peripheral bulge. The vertical uplift in this part of the Ganga Plain foreland basin caused the rivers (including the axial rivers) to make further deep incision without shifting from their courses. During periods of increased tectonic activity in the Himalayan region, i.e., the addition of thrust slices more rapidly, probably caused the maximum down-bending in the proximal part of the Ganga plain foreland basin. The high amplitude and asymmetric nature of this foreland basin is partly controlled by extensional tectonism.     

Application of drainage basin morphotectonic analysis for assessment of tectonic activities over two regional structures of the northeast India

The analysis of drainage basin morphotectonic indices is applied in assessment of the influence of tectonic activity on thirteen selected drainage basins of the streams having linear courses and flowing over two very prominent regional structures of northeast India, viz. the Belt of Schuppen and the Dauki fault. Such analysis has been made in order to assess the influence of tectonic activity of these structures on the morphology of the drainage basins of those streams.The different morphotectonic indices considered are: Basin elongation ratio, hypsometric integral, steepness index and profile concavity, drainage basin asymmetry, valley floor width to valley height ratio, longitudinal profiles, stream length gradient index and mountain front sinuosity. Results of the analysis of the morphotectonic indices of the drainage basins infer that morphology of both the streams and drainage basins have been influenced by the regional structures and the present tectonic status of these two structures varies from active to slightly active phase. No significant influence of lithology is seen in the distribution pattern of the anomalous knick points along the longitudinal profiles. The study also reveals that presently the state of tectonic activity is not uniform within the same regional structure and the Belt of Schuppen is relatively more active as compared to the Dauki fault.     

Holocene tectono-geomorphic evolution of Haryana plains,Western Ganga plain,India

Haryana plain is the drainage divide between the Ganga plain in the east and the Indus plain in the west. Being a part of the Himalayan foreland, its geomorphology, sedimentation processes, and tectonism are broadly controlled by the Himalayan tectonics. Soil and geomorphological mapping in Haryana plain bring out geomorphic features such as paleochannels, various active drainage patterns, and landforms such as old fluvial plains, floodplains, piedmonts, pediments, terminal fans, and eolian plains. Based on the degree of soil development, and Optical stimulated luminescence (OSL) ages, the soil-geomorphic units were grouped into six members (QIMS-I to VI) (Quaternary Indus Morphostratigraphic Sequence) of a morphostratigraphic sequence: QIMS-VI 9.86–5.38 Ka, QIMS-V 5.38–4.45 Ka, QIMS-IV 4.45–3.60 Ka, QIMS-III 3.60–2.91 Ka, QIMS-II <?2.91–1.52 Ka, and QIMS-I <?1.52 Ka. OSL chronology of different geomorphic features suggests six episodes of tectono-geomorphic evolution in the region since 10 Ka. Neotectonic features such as nine faults, two lineaments, and five fault-bounded tectonic blocks have been identified. Independent tilting and sagging of the blocks in response to neotectonics have resulted in modification of landforms, depositional processes, and hydro-geomorphology of the region. Major rivers like the Yamuna, the Ghaggar, and the Sutlej show different episodes of shifting of their courses. Lineament controlled few extinct channels have been recorded between 20 and 25 m depth below the surface in the ground-penetrating radar (GPR) profiles. These buried channels are aligned along the paleo-course of the Lost Saraswati River interpreted from the existing literature and hence are considered as the course of the lost river. Seven terminal fans have been formed on the downthrown blocks of the associated faults. The Markanda Terminal Fan, the first of such features described, is indeed a splay terminal fan and was formed by a splay distributary system of the Markanda River. Association of three terminal fans of different ages with the Karnal fault indicates the segment-wise development of the fault from west to east. Also, comparison with other such studies in the Ganga plain to further east suggests that the terminal fans formed by streams with distributary drainage pattern occur only in semiarid regions as in the present area and thus are indicators of semiarid climate/paleoclimate. Though the whole region is tectonically active, the region between the Rohtak fault and Hisar fault is most active at present signified by the concentration of earthquake epicenters.     

Characterization of channel planform features and sinuosity indices in parts of Yamuna River flood plain using remote sensing and GIS techniques

River planform features and sinuosity are widely acknowledged as important geomorphological indices that control the channel hydraulics and stream power which determines the flow velocity and sediment supply to downstream reaches. Despite their significance, there has been little study about these indices in mighty Yamuna River for understanding the topographic control and hydraulic regime. This paper investigates the channel planform features and sinuosity by employing topographic map, digital elevation model (DEM), and satellite imageries to elucidate the morphological, sedimentological, and hydrological characteristics of the channel. Based on sinuosity index (varies between 1.02 and 1.41), the river segments are categorized into straight (segments 1, 3, 4, 5, 6), sinuous (segments 2, 7, 8, 9, and 11), and meandering (segment 10). The parameters analyzed to find out the influencing factors on sinuosity indicate geomorphological and anthropologic control in their development. Tectonic control of sinuosity in the studied stretch is ruled out as it is flowing through an alluvial plain with low rate of discharge.     

Morphotectonic evaluation of the Delhi region in northern India,and its significance in environmental management

This paper deals with the morphotectonic evaluation of the Delhi region in northern India to understand its impact on land use and urban development. To accommodate heavy urbanization and population rise (being the capital of India), the area has undergone tremendous environmental degradation resulting from a mismatch between adopted land use and morphotectonic considerations. The geomorphic and drainage signatures of the region have evolved out of interaction of varied geological parameters including neotectonic activities. We have evaluated the changes in the drainage pattern of the Yamuna River in the Delhi region to underline its significance in geomorphic evolution and subsequent land use and/or land suitability. The Yamuna River has shown variations both in channel position and geometry over the last two centuries. The observed migration pattern of the river (shifting of confluences, position and disposition of palaeochannels, etc.,) cannot be attributed to normal river phenomenon and appears to have been effected by neotectonic changes. In addition, some case studies are discussed to underline the significance of geomorphic factors in urban development.     

九龙江北溪流域河流特征及其构造指示意义

本文利用DEM数据,运用基岩河道侵蚀模型提取九龙江北溪流域的河流下凹程度、陡峭指数和蜿蜒度等地貌指数研究北溪流域地质构造活动特点。通过对流域地貌参数的分析发现九龙江北溪流域陡峭指数存在自NW向SE递减的规律,陡峭指数和蜿蜒度有很好的对应关系.排除气候因素和基岩性质等影响因子,认为河道陡峭指数的分布特征揭示了九龙江北溪流域的地壳抬升速率自西北向东南递减的分布特征,此认识与前人采用精密水准资料计算地壳垂直运动速率结果相一致。     

River sinuosity in a humid tropical river basin,south west coast of India

The variability in ground water potential at different regions of the Meenachil River basin and the remarkable distribution of palaeodeposit of sand at its middle to lower reaches have led to interpret the sinuosity indexes of the main channel as well as the tributaries of the River for elucidating the relationship between mathematical expressions and filed observations. The measurement of digital elevation model-derived river sinuosity was carried out for 846 km² of the basin area of Meenachil River. The drainage networks of 10 major sub-watersheds and four mini-watersheds were delineated using remote sensing data—geocoded false colour composite of Indian Remote Sensing satellite (IRS)-1D (LISS III) data with a spatial resolution of 23.5 m—coupled with the Survey of India toposheets (1:50,000). The calculation of the sinuosity indexes were carried out using Arc GIS (8.3 version) software. Hydraulic sinuosity indexes, topographic sinuosity index and standard sinuosity index were calculated. The study depicts the remarkable correlation between theoretical data sets with field observations and the influence of tectonic control on river planforms. Three structurally controlled regions of Meenachil River basin were established using Remote Sensing and Geographical Information System.