网状WDM网中多播业务的共享保护设计

研究网状波分复用(WDM)光网络中动态多播业务的保护方案,提出一种共享保护和重配置(SPR)算法.该算法根据网络状态动态调整链路代价,为每个多播业务请求建立最小代价工作树,并为光树上互不重叠的工作段提供链路分离的保护段.当网络中发生链路失效时,进行业务段保护切换和局部资源重配置.仿真表明,该算法可以合理共享波长资源、平衡网络负载,有效保护WDM网中任意单链路失效,并在多链路失效情况下大大提高业务恢复能力.     

The backup reprovisioning problem of FIPP p-cycles for node failure on survivable WDM networks

Protection techniques for optical networks mainly rely on pre-allocated backup bandwidth, which may not be able to provide full protection guarantee when multiple failures occur in a network. After recovering from the previous failure, if failure occurs again, unprotected or vulnerable lightpaths cannot be recovered. In this paper, the minimal backup reprovisioning (MBR) problem is studied, in which the failure-independent path protecting p-cycles (FIPP p-cycles) scheme is considered for single-node failure on WDM networks. After recovering the affected lightpaths from a node failure, the goal of the MBR is to re-arrange the protecting and available resources such that working paths can be protected against next node failure if possible. An algorithm is designed to recover the protecting capabilities of the FIPP p-cycles, unless there is no sufficient network resource. The simulation results of the proposed method are also given.     

Capacity Optimization for Surviving Double-Link Failures in Mesh-Restorable Optical Networks

Most research to date in survivable optical network design and operation, focused on the failure of a single component such as a link or a node. A double-link failure model in which any two links in the network may fail in an arbitrary order was proposed recently in literature [1]. Three loop-back methods of recovering from double-link failures were also presented. The basic idea behind these methods is to pre-compute two backup paths for each link on the primary paths and reserve resources on these paths. Compared to protection methods for single-link failure model, the protection methods for double-link failure model require much more spare capacity. Reserving dedicated resources on every backup path at the time of establishing primary path itself would consume excessive resources. Moreover, it may not be possible to allocate dedicated resources on each of two backup paths around each link, due to the wavelength continuous constraint. In M. Sridharan et al., [2,3] we captured the various operational phases in survivable WDM networks as a single integer programming based (ILP) optimization problem. In this work, we extend our optimization framework to include double-link failures. We use the double-link failure recovery methods available in literature, employ backup multiplexing schemes to optimize capacity utilization, and provide 100% protection guarantee for double-link failure recovery. We develop rules to identify scenarios when capacity sharing among interacting demand sets is possible. Our results indicate that for the double-link failure recovery methods, the shared-link protection scheme provides 10–15% savings in capacity utilization over the dedicated link protection scheme which reserves dedicated capacity on two backup paths for each link. We provide a way of adapting the heuristic based double-link failure recovery methods into a mathematical framework, and use techniques to improve wavelength utilization for optimal capacity usage.     

Efficient Distributed Bandwidth Management for MPLS Fast Reroute

As service providers move more applications to their IP/MPLS (multiple protocol label switching ) backbone networks, rapid restoration upon failure becomes more and more crucial. Recently MPLS fast reroute has attracted lots of attention as it was designed to meet the needs of real-time applications, such as voice over IP. MPLS fast reroute achieves rapid restoration by computing and signaling backup label switched path (LSP) tunnels in advance and re-directing traffic as close to failure point as possible. To provide a guarantee of bandwidth protection, extra bandwidth has to be reserved on backup paths. Using path merging technique as described in IETF RFC 4090 only, the network is able to share some bandwidth on common links among backup paths of the same service LSP, i.e., so-called intra-sharing. But no solution is provided on how to share bandwidth among backup paths of different service LSPs, i.e., so-called inter-sharing. In this paper, we provide an efficient distributed bandwidth management solution. This solution allows bandwidth sharing among backup paths of the same and different service LSPs, i.e., both intra-sharing and inter-sharing, with a guarantee of bandwidth protection for any single node/link failure. We also propose an efficient algorithm for backup path selection with the associated signaling extensions for additional information distribution and collection. To evaluate our schemes, we compare them via simulation with the basic MPLS fast reroute proposal, IETF RFC 4090, on two networks. Our simulation results show that using our bandwidth management scheme can significantly reduce restoration overbuild from about 250% to about 100%, and our optimized backup path selection can further reduce restoration overbuild to about 60%.     

Loopback recovery from double-link failures in optical mesh networks

Network survivability is a crucial requirement in high-speed optical networks. Typical approaches of providing survivability have considered the failure of a single component such as a link or a node. We motivate the need for considering double-link failures and present three loopback methods for handling such failures. In the first two methods, two edge-disjoint backup paths are computed for each link for rerouting traffic when a pair of links fails. These methods require the identification of the failed links before recovery can be completed. The third method requires the precomputation of a single backup path and does not require link identification before recovery. An algorithm that precomputes backup paths for links in order to tolerate double-link failures is then presented. Numerical results comparing the performance of our algorithm with other approaches suggest that it is possible to achieve almost 100% recovery from double-link failures with a moderate increase in backup capacity. A remarkable feature of our approach is that it is possible to trade off capacity for restorability by choosing a subset of double-link failures and designing backup paths using our algorithm for only those failure scenarios.     

A study of the backup reprovisioning problem for FIPP p-cycles on WDM networks

As networks grow in size and complexity, both the probability and the impact of failures increase. The pre-allocated backup bandwidth cannot provide 100% protection guarantee when multiple failures occur in a network. In this article, we focus on how to recover the protecting capabilities of FIPP (Failure-independent path-protecting) p-cycles against the subsequent links failure on WDM networks, after recovering the working paths affected by the failure of link. Two recovering policies are designed to recover the protecting capabilities of the FIPP p-cycles if possible, unless there is no sufficient network resource. They are Cycle Recovery Policy and Path Recovery Policy. In addition, a Cycle Adjust algorithm is proposed and used to recover the affected cycles. The simulation results of the proposed methods are also given.     

Clustering-based multi-hop protection scheme for long-reach passive optical network against single shared-risk link group failure

The next-generation passive optical networks (NG-PONs) are expected to offer very high data rate to large number of users. Long-reach passive optical network (LR-PON) is considered to be one of the most promising solutions for NG-PONs. Since providing full protection (i.e., 100 % reliability) to each user in LR-PON is complex and cost-prohibitive, we propose in this study a novel heuristic scheme against single shared-risk link group (SRLG) failure to ensure certain degree of reliability (as determined by the network operator) to the users. In the proposed scheme (referred to as clustering-based multi-hop protection or CMHP scheme), we allocate residual capacity of backup optical network units (ONUs) among the ONUs that require protection by using bypass-based multi-hop traffic transmission strategy through backup fibers. CMHP scheme reduces the total length of backup fibers to be deployed between the ONUs (that require protection) and the respective backup ONUs through sharing of the backup fibers. In this study, we evaluate the total required length of backup fiber for a given network setting and different reliability requirements (viz. 75, 85 and 95 %). With the help of exhaustive simulations, we show that CMHP scheme significantly reduces the total length of backup fiber with reference to existing scheme to protect against single SRLG failure. We also explore a heuristic scheme referred to as clustering-based multi-hop protection with consideration of street layout (i.e., CMHP-SL) to implement CMHP scheme in practical scenario with due consideration of the street layout. CMHP-SL scheme provides protection to ONUs following a cost-efficient approach based on the existing fiber infrastructure in the distribution section.     

Performance enhancement for impairment-aware SRLG failure protection in wavelength-routed optical networks

With the increase of size and number of shared risk link groups (SRLGs) in WDM networks, path protection tends to have longer working paths and backup paths due to SRLG-disjoint constraints, which makes physical impairment a major concern in working path and backup path provisioning, particularly in large-sized all optical networks. As a simple and efficient algorithm, the working path first algorithm is often used for path protection against SRLG failures, where the working path is calculated first by using the shortest-path algorithm on the graph, followed by using the SRLG-disjoint shortest path as backup path. Compared with the working path, the backup path calculated after the working path in the working path first algorithm is more vulnerable to physical impairment, since it may be much longer than the working path. As a result, if we reject those connections that cannot meet the physical impairment requirement, with SRLGs the blocking probability of path protection will be much higher. We argue that impairment must be taken into account together with capacity efficiency in a comprehensive way during SRLG-disjoint working path and backup path selection. To solve this problem, we motivate the needs to study physical impairment-aware shared-path protection by considering two policies. Policy I uses two SRLG-disjoint least impairment paths as working path and backup path, respectively, and Policy II tries to benefit from both the shortest path and the least impairment path by choosing them intelligently. Analytical and simulation results show: (1) compared with impairment-unawareness, impairment-aware SRLG failure protection performs much better in terms of blocking probability especially with strong physical impairment constraints; (2) impairment-aware SRLG failure protection can significantly reduce physical-layer blocking probability; and (3) the algorithm based on Policy II achieves a good balance between capacity efficiency and physical impairment requirement.     

A new approach for fast segment‐based protection in WDM mesh networks

We propose a new approach for developing segment‐based schemes for protection against single link/node failure in wavelength division multiplexing (WDM) mesh networks. In the proposed approach, every request is allocated a pair of link disjoint but most coupled primary and backup paths. Two paths are said to be most coupled if they share the maximum number of end nodes of some existing requests. Coupled paths reduce the total number of hops need to be traversed by a failure signal and, hence, potentially reduces the overall recovery time. We show that the problem of finding a pair of disjoint and most coupled paths is NP‐complete. Accordingly, we propose an efficient and fast protection algorithm called SPXP—Segment Pre‐Cross‐Connected Protection, to allocate disjoint and most coupled paths. The proposed SPXP algorithm reduces the recovery time by ensuring that backup resources are pre‐configured along each backup segment and, hence, is readily available upon a failure. Simulation results for different incremental traffic models and network topologies show that, for most cases, the proposed SPXP exhibits better performance in terms of blocking probability, resource usage, and recovery time compared with existing protection schemes. Copyright © 2010 John Wiley & Sons, Ltd.     

Near optimal routing and capacity management for PWCE-based survivable WDM networks

Protected Working Capacity Envelope (PWCE) has been proposed to simplify resource management and traffic control for survivable WDM networks. In a PWCE-based network, part of the link capacity is reserved for accommodating working routes, and the remaining capacity is reserved for backup routes. The shortest path routing is applied in PWCE-based networks. An arrival call is accepted only when each link along the shortest path has a free working channel. Such a working path routing scheme greatly simplifies the call admission control process for dynamic traffic, and it is especially suitable for implementation in a distributed manner among network nodes. In this article, we investigate two protection strategies: Bundle Protection (BP) and Individual Protection (IDP). In BP, only one backup path can be used to protect a failure component, whereas multiple backup paths can be used in IDP. We formulate four mixed integer non-linear programming (MINLP) problems using BP and IDP strategies for single link and single node failure protection. Each model is designed to determine link metrics for shortest working path routing, working and backup channel assignments, and backup path planning. Our objective is to minimize call-blocking probability on the bottleneck link. Since these models are highly non-linear and non-convex, it is difficult to obtain exact global optimal solutions. We propose a Simulated Annealing-based Heuristic (SAH) algorithm to obtain near optimal solutions. This SAH adopts the concepts of simulated annealing as well as the bi-section technique to minimize call-blocking probabilities. To evaluate the performance, we made simulation comparisons between SAH and the unity link weight assignment scheme. The results indicate that SAH can greatly reduce call-blocking probabilities on benchmark and the randomly generated networks.     

Achieving fast and bandwidth-efficient shared-path protection

Dynamic provisioning of restorable bandwidth guaranteed paths is a challenge in the design of broad-band transport networks, especially next-generation optical networks. A common approach is called (failure-independent) path protection, whereby for every mission-critical active path to be established, a link (or node) disjoint backup path (BP) is also established. To optimize network resource utilization, shared path protection should be adopted, which often allows a new BP to share the bandwidth allocated to some existing BPs. However, it usually leads the backup paths to use too many links, with zero cost in term of additional backup bandwidth, along its route. It will violate the restoration time guarantee. In this paper, we propose novel integer linear programming (ILP) formulations by introducing two parameters (/spl epsi/ and /spl mu/) in both the sharing with complete information (SCI) scheme and the distributed partial information management (DPIM) scheme. Our results show that the proposed ILP formulations can not only improve the network resource utilization effectively, but also keep the BPs as short as possible.     

A novel AWG-based WDM-PON architecture with full protection capability

The higher bandwidth utilization of wavelength-division-multiplexing passive optical networks (WDM-PONs) can be problematic if the link failure is not repaired in a timely manner since major data losses may occur in the event of link failure. Therefore, developing robust WDM-PON architectures with an effective protection capability is an essential task when designing optical access networks. Although the literature contains many proposals for WDM-PON protection schemes, the majority of these schemes protect either the feeder fibers or the distribution fibers, but not both. By exploiting the cyclic properties of the AWG and establishing appropriate interconnections between matched pairs of ONUs such that one ONU in the pair can use the distribution fiber assigned to its partner for backup purposes, the proposed scheme can protect both the feeder fibers and the distribution fibers through the designated protection streams in feeder fiber 3. Additionally, five operational modes of the proposed scheme are detailed with the proposed wavelength assignment scheme, the operational sequence, and the operation flow chart of decision circuit in the ONU/OLT. The analytical results have shown that the proposed scheme not only provides a full protection capability for WDM-PON networks, but also has a lower unavailability, a lower construction cost, and a reduced wavelength requirement than existing representative protection schemes. Finally, an analysis of the power budget and the recovery time has confirmed the practical feasibility of the proposed scheme.     

Resource efficient network design and traffic grooming strategy with guaranteed survivability

In WDM networks, path protection has emerged as a widely accepted technique for providing guaranteed survivability of network traffic. However, it requires allocating resources for backup lightpaths, which remain idle under normal fault-free conditions. In this paper, we introduce a new design strategy for survivable network design, which guarantees survivability of all ongoing connections that requires significantly fewer network resources than protection based techniques. In survivable routing, the goal is to find a Route and Wavelength Assignment (RWA) such that the logical topology remains connected for all single link failures. However, even if the logical topology remains connected after any single link fault, it may not have sufficient capacity to support all the requests for data communication, for all single fault scenarios. To address this deficiency, we have proposed two independent but related problem formulations. To handle our first formulation, we have presented an Integer Linear Program (ILP) that augments the concept of survivable routing by allowing rerouting of sub-wavelength traffic carried on each lightpath and finding an RWA that maximizes the amount of traffic that can be supported by the network in the presence of any single link failure. To handle our second formulation, we have proposed a new design approach that integrates the topology design and the RWA in such a way that the resulting logical topology is able to handle the entire set of traffic requests after any single link failure. For the second problem, we have first presented an ILP formulation for optimally designing a survivable logical topology, and then proposed a heuristic for larger networks. Experimental results demonstrate that this new approach is able to provide guaranteed bandwidth, and is much more efficient in terms of resource utilization, compared to both dedicated and shared path protection schemes.     

Dual-Link Failure Resiliency Through Backup Link Mutual Exclusion

Networks employ link protection to achieve fast recovery from link failures. While the first link failure can be protected using link protection, there are several alternatives for protecting against the second failure. This paper formally classifies the approaches to dual-link failure resiliency. One of the strategies to recover from dual-link failures is to employ link protection for the two failed links independently, which requires that two links may not use each other in their backup paths if they may fail simultaneously. Such a requirement is referred to as backup link mutual exclusion (BLME) constraint and the problem of identifying a backup path for every link that satisfies the above requirement is referred to as the BLME problem. This paper develops the necessary theory to establish the sufficient conditions for existence of a solution to the BLME problem. Solution methodologies for the BLME problem is developed using two approaches by: 1) formulating the backup path selection as an integer linear program; 2)developing a polynomial time heuristic based on minimum cost path routing. The ILP formulation and heuristic are applied to six networks and their performance is compared with approaches that assume precise knowledge of dual-link failure. It is observed that a solution exists for all of the six networks considered. The heuristic approach is shown to obtain feasible solutions that are resilient to most dual-link failures, although the backup path lengths may be significantly higher than optimal. In addition, the paper illustrates the significance of the knowledge of failure location by illustrating that network with higher connectivity may require lesser capacity than one with a lower connectivity to recover from dual-link failures.     

WDM网基于混合共享和SRLG约束的通路保护

研究了网状波分复用（WDM）网中动态生存性路由配备问题，提出了一种新颖的基于共享风险链路组（SRLG）束的混合共享通路保护（MSPP）方案。MSPP为每个业务请求分配丁作通路和SRLG分离的保护通路，因此能完全保护单SRLG故障。与传统的共享通路保护（SPP）方案不同，在满足某些约束条件下，MSPP允许部分工作通路和保护通路共享资源。仿真结果表明，MSPP性能优于SPP。     

Hierarchical Protection Tree Scheme for Failure Recovery in Mesh Networks

This paper presents a novel technique for link protection in mesh networks based on the use of hierarchical trees. The hierarchical protection tree (or p-tree) provides hierarchical layering of the network. The straddling links that are not located in the tree are protected through tree branches to higher-layer Parent nodes. The links in the tree are protected by links to backup parent nodes. This scheme offers several advantages such as scalability, failure impact restriction, and distributed processing. We provide a mathematical analysis to compute performance measures for our link protection scheme, and perform restorability analysis for several real and arbitrary long haul networks to compare our scheme to other link protection proposals. Our results demonstrate the applicability of hierarchical p-tree link protection schemes in real long-haul networks.     

Path-based routing provisioning with mixed shared protection in WDM mesh networks

In this paper, the authors focus on studying the problem of survivable routing provisioning to prevent single link failure in wavelength-division-multiplexing (WDM) mesh networks, and propose a novel protection scheme called mixed shared path protection (MSPP). With MSPP, the authors define three types of resources: 1) primary resources that can be used by primary paths; 2) spare resources that can be shared by backup paths; and 3) mixed resources that can be shared by both the primary and the backup paths. In the proposed protection scheme, each connection is assigned a primary path and a link disjoint backup path. Differing from pervious protection schemes, MSPP allows some primary paths and backup paths to share the common mixed resources if the corresponding constraints can be satisfied. In this paper, the authors consider three types of path-based protection schemes, i.e., dedicated path protection (DPP), shared path protection (SPP), and MSPP, and evaluate their performance for both the static and the dynamic provisioning problems. Simulation results show that MSPP outperforms DPP and SPP.     

The backup reprovisioning problem of NEPCs on survivable WDM networks

Protection techniques for optical networks mainly rely on pre-allocated backup bandwidth, which may not be able to provide full protection guarantee when multiple failures occur in a network. After recovering from the previous failure, if failure occurs again, unprotected or vulnerable lightpaths cannot be recovered. In this paper, the minimal backup reprovisioning (MBR) problem is studied, in which, the node-encircling protecting cycles (NEPCs) scheme is considered for single node-failure on WDM networks. The NEPC Recovery Algorithm is proposed to recover the protecting capabilities of the NEPC. Simulation results show that the performance of the proposed method is better than that of the traditional one.     

Joint wireless and optical resources allocation for availability-guaranteed service in survivable fiber-wireless access network

The fiber-wireless (FIWi) access network not only leverages the technical merits of wireless and optical access networks, but also provides a potential opportunity for the design of survivable access networks. Previous works have studied the survivability of FiWi access network against network component failure by means of backup fiber deployment and wireless rerouting. However, most of these works put less attention on the connection availability and ignore the joint allocation of wireless and optical resources, which plays an important role in improving the global network performance gain. In this paper, we consider a notable failure scenario in FiWi access network but less mentioned in previous works, i.e., single shared-risk link group failure. We first propose a model for FiWi network to estimate the connection availability of service demand. Then, a novel resource allocation approach is proposed to provide the availability-guaranteed service. Under the requirements of bandwidth and connection availability, we deal with the optimal allocation of joint wireless and optical resources with the objective of minimum resource consumption. Numerical results demonstrate that the proposed scheme can reduce the resource consumption significantly compared to the resource allocation without considering connection availability.     

Performance evaluation of the survivability schemes in WOBAN: a quality of recovery (QoR) method

The hybrid wireless optical broadband access network (WOBAN) is a combination of an optical backhaul and a wireless front‐end, which combine the huge amount of available bandwidth of optical networks and the ubiquity and mobility of wireless access networks with the objective of reducing their cost and complexity. Survivability is one of the most important issues in WOBAN. In this paper, the survivability schemes in WOBAN are addressed from a particular point of view of the quality of recovery (QoR) method. The QoR is a comprehensive measure to evaluate the survivability schemes in terms of availability, recovery time, redundancy, and bandwidth of backup path. The specific procedures to set up the analytical models for the survivability schemes in WOBAN are given based on the QoR concept, including abstract, normalization, and application. Besides, the weights assignment is provided to calculate the QoR value for the operators, home users, or business users with different requirements, which in turn offers the user‐perceptive quality of service. To verify the performance of the survivability schemes by the QoR method, extensive simulations are made under different WOBAN configurations. Numerical results show that for the intra‐domain survivability schemes, the wireless and optical mixed protection scheme is the best choice for failure recovery in WOBAN. The wireless scheme is the second choice for the solution, which emphasizes cost control, while for the solution that emphasizes the network performance, the 1:1 scheme is the second choice. The 1:N scheme obtains the worst QoR value as the splitter ratios increase. For the inter‐domain survivability schemes, optimizing backup optical networking units selection and backup fibers deployment scheme outperforms maximum protection with minimum cost scheme from the point of view of QoR. Copyright © 2013 John Wiley & Sons, Ltd.