Adaptive robust fuzzy control for path tracking of a wheeled mobile robot

This paper proposes an adaptive robust fuzzy control scheme for path tracking of a wheeled mobile robot with uncertainties. The robot dynamics including the actuator dynamics is considered in this work. The presented controller is composed of a fuzzy basis function network (FBFN) to approximate an unknown nonlinear function of the robot complete dynamics, an adaptive robust input to overcome the uncertainties, and a stabilizing control input. The stability and the convergence of the tracking errors are guaranteed using the Lyapunov stability theory. When the controller is designed, the different parameters for two actuator models in the dynamic equation are taken into account. The proposed control scheme does not require the accurate parameter values for the actuator parameters as well as the robot parameters. The validity and robustness of the proposed control scheme are demonstrated through computer simulations. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Adaptive sliding mode control for trajectory tracking of nonholonomic mobile robot with uncertain kinematics and dynamics

ABSTRACT

This article designs a novel adaptive trajectory tracking controller for nonholonomic wheeled mobile robot under kinematic and dynamic uncertainties. A new velocity controller, in which kinematic parameter is estimated, produces velocity command of the robot. The designed adaptive sliding mode dynamic controller incorporates an estimator term to compensate for the external disturbances and dynamic uncertainties and a feedback term to improve the closed-loop stability and account for the estimation error of external disturbances. The system stability is analyzed using Lyapunov theory. Computer simulations affirm the robustness of the designed control scheme.     

空间三关节机器人模糊积分滑模控制

研究提高关节机器人轨迹跟踪控制的性能,由于关节机器人运动中产生振动,影响系统的稳定性能。为解决上述问题,提出了一种反馈线性化的自适应模糊积分滑模控制方法。在上述方法的基础上,对机器人非线性动力学模型反馈线性化。为了进一步提高滑模控制的精度,设计了一种积分滑模面的滑模控制器,可以减弱积分滑模控制的抖振。通过设计一个模糊控制器,根据积分滑模面的大小自适应地调节积分滑模控制的切换部分,达到削弱抖振的目的。利用李亚普诺夫定理证明了控制系统的稳定性。仿真结果表明,改进方法有效地提高了关节机器人跟踪控制性能。     

Adaptive Output Feedback Control of Flexible-Joint Robots Using Neural Networks: Dynamic Surface Design Approach

In this paper, we propose a new robust output feedback control approach for flexible-joint electrically driven (FJED) robots via the observer dynamic surface design technique. The proposed method only requires position measurements of the FJED robots. To estimate the link and actuator velocity information of the FJED robots with model uncertainties, we develop an adaptive observer using self-recurrent wavelet neural networks (SRWNNs). The SRWNNs are used to approximate model uncertainties in both robot (link) dynamics and actuator dynamics, and all their weights are trained online. Based on the designed observer, the link position tracking controller using the estimated states is induced from the dynamic surface design procedure. Therefore, the proposed controller can be designed more simply than the observer backstepping controller. From the Lyapunov stability analysis, it is shown that all signals in a closed-loop adaptive system are uniformly ultimately bounded. Finally, the simulation results on a three-link FJED robot are presented to validate the good position tracking performance and robustness of the proposed control system against payload uncertainties and external disturbances.     

Adaptive sliding mode dynamic controller with integrator in the loop for nonholonomic wheeled mobile robot trajectory tracking

In this paper, novel adaptive sliding mode dynamic controller with integrator in the loop is proposed for nonholonomic wheeled mobile robot (WMR). The modified kinematics controller is used to generate kinematics velocities of WMR which are subsequently used as the input to adaptive dynamic controller. Actuator dynamics are also derived to generate actuator voltage of WMR through torque and velocity vectors. Stability of both kinematics and dynamic controller is presented using Lyapunov stability analysis. The proposed scheme is verified and validated using computer simulations for tracking the desired trajectory of WMR. The performance of proposed scheme is compared with standard backstepping kinematics controller and classical sliding mode control. In addition, the performance is further compared with standard backstepping kinematics controller with adaptive sliding mode controller without integrator. It is shown that the proposed scheme exhibits zero steady state error, fast error convergence and robustness in the presence of continuous disturbances and uncertainties.     

Adaptive tracking control for robot manipulator

In this study, an adaptive control system is proposed for the tracking control of an n-link robot manipulator to achieve high-precision position control. The presentation of the adaptive control system is divided into three parts: a feedforward controller, a state feedback controller and an uncertainty alleviator. All on-line tuning algorithms in the adaptive control system are derived in the sense of Lyapunov stability analysis, so that system-tracking stability can be guaranteed in the closed-loop system whether the uncertainties occur. It has learning ability similar to intelligent control, but with a simpler control framework. Computer simulations of a three-link SCARA robot manipulator verify the validity of the proposed control strategy in the possible presence of uncertainties. The merits of the proposed control scheme are that not only can the stability of the controlled system be guaranteed, but also no constrained conditions and prior knowledge of the controlled plant are required in the design process.     

Robust adaptive control for a nonholonomic mobile robot with unknown parameters

A robust adaptive controller for a nonholonomic mobile robot with unknown kinematic and dynamic parameters is proposed. A kinematic controller whose output is the input of the relevant dynamic controller is provided by using the concept of backstepping. An adaptive algorithm is developed in the kinematic controller to approximate the unknown kinematic parameters, and a simple single-layer neural network is used to express the highly nonlinear robot dynamics in terms of the known and unknown parameters. In order to attenuate the effects of the uncertainties and disturbances on tracking performance, a sliding mode control term is added to the dynamic controller. In the deterministic design of feedback controllers for the uncertain dynamic systems, upper bounds on the norm of the uncertainties are an important clue to guarantee the stability of the closed-loop system. However, sometimes these upper bounds may not be easily obtained because of the complexity of the structure of the uncertainties. Thereby, simple adaptation laws are proposed to approximate upper bounds on the norm of the uncertainties to address this problem. The stability of the proposed control system is shown through the Lyapunov method. Lastly, a design example for a mobile robot with two actuated wheels is provided and the feasibility of the controller is demonstrated by numerical simulations.     

Takagi-Sugeno fuzzy model based indirect adaptive fuzzy observer and controller design

This paper proposes the design scheme of the alternative adaptive observer and controller based on the Takagi-Sugeno (T-S) fuzzy model. The T-S fuzzy modeling and the state feedback control technique are adopted for the simple structure. The proposed method maintains consistent performance in the presence of parameter uncertainties and incorporates linguistic fuzzy information from human operators. In addition, with the simple adaptive state feedback controller, it solves the singularity problem, which occurs in the inverse dynamics based on the feedback linearization method. Using Lyapunov theory and Lipschitz condition, the stability analysis is conducted, and the adaptive law is derived. The proposed method is applied to the stabilization problem of a flexible joint manipulator in order to guarantee its performance.     

基于滑模位置控制的机器人灵巧手模糊自适应阻抗控制

提出一种基于滑模位置控制的模糊自适应阻抗控制策略。该控制方案通过模糊控制器实时地调整阻抗参数,不但可使系统稳定,而且具有良好的动态品质;同时内环的滑模位置控制器可增强系统的鲁棒性,最后以机器人灵巧手单关节为对象进行仿真研究,证明了该控制策略的有效性和可行性。     

基于自适应模糊补偿的机械臂复合控制策略

针对刚性机械臂存在摩擦和扰动等不确定因素给轨迹跟踪控制带来的困难,本文基于李亚普诺夫稳定性理论,给出了一种机械臂的自适应控制方案．该方案针对机械臂的标称部分,采用计算力矩的方法设计相应的控制量,在此基础上,构造模糊系统逼近摩擦得到补偿控制量,并针对随机扰动的上界设计反馈控制率,以克服扰动带来的影响,保证系统的稳定性．仿真结果表明,该复合控制对于具有不确定性摩擦以及扰动的机械臂轨迹跟踪问题效果良好．     

基于神经网络的无人机姿态自适应控制仿真

针对四旋翼无人机姿态控制中模型不完整、部分参数和扰动不确定的问题,提出了一种基于神经网络的自适应控制方法,采用RBF神经网络对无人机姿态动力学模型中不确定和扰动部分进行学习,设计了以类反步法为基础,包含反馈控制和神经网络控制的自适应控制器,实现了对未知动态的准确逼近,解决了传统控制方法中过于依赖精确模型的问题。同时设计了神经网络的权值自适应律,实现了控制过程中的在线学习和调整,并且通过李雅普诺夫方法证明了闭环系统的稳定性。仿真结果表明,在存在较大扰动的情况下,上述控制器可得到很好的控制效果,可以实现误差的快速收敛,具有较好的鲁棒性和自适应性。     

Fuzzy neural network quadratic stabilization output feedback control for biped robots via H/sub /spl infin// approach

A novel fuzzy neural network (FNN) quadratic stabilization output feedback control scheme is proposed for the trajectory tracking problems of biped robots with an FNN nonlinear observer. First, a robust quadratic stabilization FNN nonlinear observer is presented to estimate the joint velocities of a biped robot, in which an H/sub /spl infin// approach and variable structure control (VSC) are embedded to attenuate the effect of external disturbances and parametric uncertainties. After the construction of the FNN nonlinear observer, a quadratic stabilization FNN controller is developed with a robust hybrid control scheme. As the employment of a quadratic stability approach, not only does it afford the possibility of trading off the design between FNN, H/sub /spl infin// optimal control, and VSC, but conservative estimation of the FNN reconstruction error bound is also avoided by considering the system matrix uncertainty separately. It is shown that all signals in the closed-loop control system are bounded.     

Sliding Mode Control with Adaptive Fuzzy Immune Feedback Reaching Law

In this paper, a novel adaptive fuzzy immune feedback reaching law (AFIFRL) based sliding mode control (SMC) strategy is proposed for uncertain nonlinear systems with time-varying disturbances. First, a nonlinear immune feedback reaching law (IFRL) inspired by biological immune feedback regulation mechanism is designed to alleviate chattering effect without losing the robustness against disturbances. Second, an improved IFRL is developed in a thin boundary layer to enhance tracking performance. Then, the applied fuzzy controller adjusts the boundary layer online to further improve control performance despite large system uncertainties and disturbances. Furthermore, an adaptive law is employed to estimate the unknown bound of uncertainties, which can effectively attenuate chattering and minimize control effort. The stability analysis is derived by Lyapunov stability theorem. Finally, numerical simulations are conducted to evidence the effectiveness and superiority of the proposed AFIFRL based SMC scheme.     

Global Convergence of a Decentralized Adaptive Fuzzy Control for the Motion of Robot Manipulators: Application to the Mitsubishi PA10-7CE as a Case of Study

In general terms, robot control consists in making a robot execute a commanded task. One of the most important cases is the trajectory tracking or motion control. In this paper, a control algorithm that uses adaptive fuzzy systems to approximate local portions of the robot manipulator dynamics is proposed in order to solve the trajectory tracking problem. This scheme is characterized by not requiring any knowledge of the dynamic model and, in contrast to some fuzzy adaptive controllers previously developed, the one proposed here is in a decentralized configuration, wherein each joint is considered as a subsystem and is independently controlled only through its local variables. Furthermore, a study that guarantees the stability and the boundedness of the solutions of the closed-loop system via Lyapunov theory is presented, including a functional analysis which proves for the first time that a decentralized adaptive fuzzy controller satisfies the motion control objective. The theoretical results exposed here are verified via experimentation by applying the designed algorithm to the Mitsubishi PA10-7CE robot arm and the outcomes are reported.     

Experimental study on direct adaptive control of a PUMA 560 industrial robot

The article describes the implementation and experimental validation of a new direct adaptive control scheme on a PUMA 560 industrial robot. The testbed facility consists of a Unimation PUMA 560 six-jointed robot and controller, and a DEC Micro VAX II computer which hosts the RCCL (Robot Control “C” Library) software. The control algorithm is implemented on the Micro VAX which acts as a digital controller for the PUMA robot, and the Unimation controller is effectively bypassed and used merely as an I/O device to interface the Micro VAX to the joint motors. The control algorithm for each robot joint consists of an auxiliary signal generated by a constant-gain PID controller, and an adaptive position-velocity (PD) feedback controller with adjustable gains. The adaptive independent joint controllers compensate for the interjoint couplings and achieve accurate trajectory tracking without the need for the complex dynamic model and parameter values of the robot. Extensive experimental results on PUMA joint control are presented to confirm the feasibility of the proposed scheme, in spite of strong interactions between joint motions. The scheme is also implemented for control of the end-effector motion in Cartesian space. Experimental results validate the capabilities of the proposed control scheme. The control scheme is extremely simple and computationally very fast for concurrent processing with high sampling rates.     

Fuzzy-Basis-Function-Network-Based $H_infty$ Tracking Control for Robotic Manipulators Using Only Position Feedback

This paper presents an H _infin fuzzy output-feedback tracking-control scheme for robotic manipulators without measuring joint velocities. The developed controller and observer are based on a fuzzy basis function network (FBFN), which is employed to approximate nonlinear functions in the dynamics of controller and observer. The FBFN-based observer that estimates joint velocities can remove the needs of full-state measurements. According to the inevitable approximation errors and external disturbances, an H _infin auxiliary control signal is used to suppress the effects of the uncertainties. Moreover, all parameters of the fuzzy basis functions (FBFs) and FBF-to-output weights can be tuned online. The proposed controller requires no prior knowledge about the dynamics of the robot manipulator and no offline learning phase. Finally, comparative simulations on a three-link robot manipulator are provided to illustrate the tracking performance of the H _infin FBFN-based output-feedback control approach.     

Visual tracking control for an uncalibrated robot system with unknown camera parameters

The robust trajectory tracking problem for an eye-in-hand system is addressed in this paper. A novel visual feedback control model is proposed. It considers not only the uncertainties and disturbances in the robot model, but also the unknown camera parameters. By using sliding mode control, filter method and adaptive technique, the controller is designed such that the robot can track the desired trajectory well by using information provided by camera. Finally, stability and robustness are rigorously proved by using Lyapunov method. Computer simulations are presented to show the effectiveness of the proposed visual feedback controller.     

Adaptive observer-based trajectory tracking control of nonholonomic mobile robots

In this paper, an adaptive observer-based trajectory tracking problem is solved for nonholonomic mobile robots with uncertainties. An adaptive observer is first developed to estimate the unmeasured velocities of a mobile robot with model uncertainties. Using the designed observer and the backstepping technique, a trajectory tracking controller is designed to generate the torque as an input. Using Lyapunov stability analysis, we prove that the closed-loop system is asymptotically stable with respect to the estimation errors and tracking errors. Finally, the simulation results are presented to validate the performance and robustness of the proposed control system against uncertainties.     

Real-time implementation of a robust adaptive controller for arobotic manipulator based on digital signal processors

Presents an approach to the design and real-time implementation of an adaptive controller for a robotic manipulator based on digital signal processors. The Texas Instruments DSP (TMS320C31) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for robotic manipulators. In the proposed scheme, adaptation laws are derived from the direct model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feedforward and feedback controller and PI-type time-varying auxiliary control elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for an industrial robot with four joints in the joint space and Cartesian space     

Adaptive Fuzzy Neural Network Control Design via a T–S Fuzzy Model for a Robot Manipulator Including Actuator Dynamics

This paper focuses on the development of adaptive fuzzy neural network control (AFNNC), including indirect and direct frameworks for an $n$-link robot manipulator, to achieve high-precision position tracking. In general, it is difficult to adopt a model-based design to achieve this control objective due to the uncertainties in practical applications, such as friction forces, external disturbances, and parameter variations. In order to cope with this problem, an indirect AFNNC (IAFNNC) scheme and a direct AFNNC (DAFNNC) strategy are investigated without the requirement of prior system information. In these model-free control topologies, a continuous-time Takagi–Sugeno (T–S) dynamic fuzzy model with online learning ability is constructed to represent the system dynamics of an $n$-link robot manipulator. In the IAFNNC, an FNN estimator is designed to tune the nonlinear dynamic function vector in fuzzy local models, and then, the estimative vector is used to indirectly develop a stable IAFNNC law. In the DAFNNC, an FNN controller is directly designed to imitate a predetermined model-based stabilizing control law, and then, the stable control performance can be achieved by only using joint position information. All the IAFNNC and DAFNNC laws and the corresponding adaptive tuning algorithms for FNN weights are established in the sense of Lyapunov stability analyses to ensure the stable control performance. Numerical simulations and experimental results of a two-link robot manipulator actuated by dc servomotors are given to verify the effectiveness and robustness of the proposed methodologies. In addition, the superiority of the proposed control schemes is indicated in comparison with proportional–differential control, fuzzy-model-based control, T–S-type FNN control, and robust neural fuzzy network control systems.