$hbox{In}_{0.53}hbox{Ga}_{0.47}hbox{As}$ Channel MOSFETs With Self-Aligned InAs Source/Drain Formed by MEE Regrowth

Abstract-We report Al₂O₃Zln_0.53Ga_0.47As MOSFETs having both self-aligned in situ Mo source/drain ohmic contacts and self-aligned InAs source/drain n⁺ regions formed by MBE regrowth. The device epitaxial dimensions are small, as is required for 22-nm gate length MOSFETs; a 5-nm In_0.53Ga_0.47As channel with an In_0.4sAl_0.52As back confinement layer and the n⁺⁺ source/drain junctions do not extend below the 5-nm channel. A device with 200-nm gate length showed I_D = 0.95 mA/mum current density at V_GS = 4.0 V and g_m = 0.45 mS/mum peak transconductance at V_DS = 2.0 V.     

A Two-Step-Recess Process Based on Atomic-Layer Etching for High-Performance $hbox{In}_{0.52}hbox{Al}_{0.48}hbox{As}hbox{/}hbox{In}_{0.53} hbox{Ga}_{0.47}hbox{As}$ p-HEMTs

We investigated 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As pseudomorphic high-electron mobility transistors (p-HEMTs) fabricated by using a Ne-based atomic-layer-etching (ALET) technology. The ALET process produced a reproducible etch rate of 1.47 Aring/cycle for an InP etch stop layer, an excellent InP etch selectivity of 70 against an In_0.52Al_0.48As barrier layer, and an rms surface-roughness value of 1.37 Aring for the exposed In_0.52Al_0.48As barrier after removing the InP etch stop layer. The application of the ALET technology for the gate recess of 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As p-HEMTs produced improved device parameters, including transconductance (G_M), cutoff frequencies (f_T)> and electron saturation velocity (vsat) in the channel layer, which is mainly due to the high etch selectivity and low plasma-induced damage to the gate area. The 60-nm In_0.52Al_0.48As/In_0.53Ga_0.47As p-HEMTs fabricated by using the ALET technology exhibited G_M,_Max = 1-17 S/mm, f_T = 398 GHz, and v_sat = 2.5 X 10⁷ cm/s.     

Enhancement-Mode Buried-Channel $hbox{In}_{0.7} hbox{Ga}_{0.3}hbox{As/In}_{0.52}hbox{Al}_{0.48}hbox{As}$ MOSFETs With High- $kappa$ Gate Dielectrics

The operation of long- and short-channel enhancement-mode In_0.7Ga_0.3As-channel MOSFETs with high-k gate dielectrics are demonstrated for the first time. The devices utilize an undoped buried-channel design. For a gate length of 5 mum, the long-channel devices have V_t= +0.25 V, a subthreshold slope of 150 mV/dec, an equivalent oxide thickness of 4.4 +/ - 0.3 nm, and a peak effective mobility of 1100 cm²/Vldrs. For a gate length of 260 nm, the short-channel devices have V_t=+0.5 V and a subthreshold slope of 200 mV/dec. Compared with Schottky-gated high-electron-mobility transistor devices, both long- and short-channel MOSFETs have two to four orders of magnitude lower gate leakage.     

Lateral and Vertical Scaling of $hbox{In}_{0.7} hbox{Ga}_{0.3}hbox{As}$ HEMTs for Post-Si-CMOS Logic Applications

In this paper, we have experimentally investigated the impact of lateral and vertical scaling of In_0.7Ga_0.3As high-electron-mobility transistors (HEMTs) onto their logic performance. We have found that reducing the In_0.52Al_0.48As insulator thickness results in much better electrostatic integrity and improved short-channel behavior down to a gate length of around 60 nm. Our nearly enhancement-mode 60-nm HEMTs feature V_T = -0.02 V, DIBL = 93 mV/V, S = 88 mV/V, and I_ON/I_OFF = 1.6 times10⁴, at V _DD = 0.5 V. We also estimate a gate delay of CV/I = 1.6 ps at V_DD = 0.5 V. We have benchmarked these devices against state-of-the-art Si CMOS. For the same leakage current, which includes the gate leakage current, the InGaAs HEMTs exhibit 1.2times more current drive (I_ON) than the state-of-the-art 65-nm low-power CMOS technology at V _DD = 0.5 V.     

RF and Logic Performance Improvement of $ hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}/hbox{InAs}/hbox{In}_{0.7}hbox{Ga}_{0.3}hbox{As}$ Composite-Channel HEMT Using Gate-Sinking Technology

Eighty-nanometer-gate In_0.7Ga_0.3As/InAs/In_0.7Ga_0.3As composite-channel high-electron mobility transistors (HEMTs), which are fabricated using platinum buried gate as the Schottky contact metal, were evaluated for RF and logic application. After gate sinking at 250degC for 3 min, the device exhibited a high g_m value of 1590 mS/mm at V_d = 0.5 V, the current-gain cutoff frequency f_T was increased from 390 to 494 GHz, and the gate-delay time was decreased from 0.83 to 0.78 ps at supply voltage of 0.6 V. This is the highest f_T achieved for 80-nm-gate-length HEMT devices. These superior performances are attributed to the reduction of distance between gate and channel and the reduction of parasitic gate capacitances during the gate-sinking process. Moreover, such superior performances were achieved through a very simple and straightforward fabrication process with optimal epistructure of the device.     

Electrical Properties of Low-$V_{T}$ Metal-Gated n-MOSFETs Using $hbox{La}_{2}hbox{O}_{3}/hbox{SiO}_{x}$ as Interfacial Layer Between HfLaO High- $kappa$ Dielectrics and Si Channel

In this letter, we report that by employing the La₂O₃/SiO_x interfacial layer between HfLaO (La = 10%) high- and Si channel, the Ta₂C metal-gated n-MOSFETs V_T can be significantly reduced by ~350 mV to 0.2 V, satisfying the low-Vy device requirement. The resultant n-MOSFETs also exhibit an ultrathin equivalent oxide thickness (~1.18 nm) with a low gate leakage (J_G = 10 mA/cm² at 1.1 V), good drive performance (I_on = 900 muA/mum at I_soff = 70 nA/mum), and acceptable positive-bias-temperature-instability reliability.     

35-nm Zigzag T-Gate $hbox{In}_{0.52}hbox{Al}_{0.48} hbox{As/In}_{0.53}hbox{Ga}_{0.47}hbox{As}$ Metamorphic GaAs HEMTs With an Ultrahigh $f_{max}$ of 520 GHz

Metamorphic GaAs high electron mobility transistors (mHEMTs) with the highest-f _max reported to date are presented here. The 35-nm zigzag T-gate In_0.52Al_0.48As/In_0.53Ga_0.47As metamorphic GaAs HEMTs show f _maxof 520 GHz, f _T of 440 GHz, and maximum transconductance (g _m) of 1100 mS/mm at a drain current of 333 mA/mm. The combinations of f _max and f _T are the highest data yet reported for mHEMTs. These devices are promising candidates for aggressively scaled sub-35-nm T-gate mHEMTs.     

Low-Voltage and High-Speed Operations of 30-nm-Gate Pseudomorphic $hbox{In}_{0.52}hbox{Al}_{0.48}hbox{As}/hbox{In}_{0.7}hbox{Ga}_{0.3} hbox{As}$ HEMTs Under Cryogenic Conditions

In this letter, we fabricated 30-nm-gate pseudomorphic In_0.52 Al_0.48As/In_0.7Ga_0.3As HEMTs with multilayer cap structures to reduce source and drain parasitic resistances; we measured their dc and radio-frequency characteristics at 300, 77, and 16 K under various bias conditions. The maximum cutoff frequency fT was 498 GHz at 300 K and 577 GHz at 77 K. The maximum fT exceeded 600 GHz at 16 K. Even at a drain-source voltage V _ds of 0.4 V, we obtained an fT of 500 GHz at 16 K. This indicates that cryogenic HEMTs are favorable for low-voltage and high-speed operations. Furthermore, the present 30-nm-gate HEMTs at 300 K show almost the same fT values at the same dc-power dissipation as compared to 85-nm-gate InSb-channel HEMTs. The improvement of the maximum-oscillation-frequency f _max values was also observed at 77 and 16 K.     

Achieving Low-$V_{T}$ Ni-FUSI CMOS by Ultra-Thin $hbox{Dy}_{2}hbox{O}_{3}$ Capping of Hafnium Silicate Dielectrics

This letter reports that the effective work function (eWF) of Ni-Fully Silicided (Ni-FUSI) devices with HfSiON gate dielectrics can be modulated toward the silicon conduction band-edge by deposition of an ultra-thin Dy₂O₃ cap layer on the host dielectric. The obtained eWF depends on the deposited cap layer thickness and the Ni-FUSI phase, with 10 Aring Dy₂O₃ cap resulting in DeltaeWF ap 400 meV and final eWF ap 4.08 eV for NiSi-FUSI. Dielectric intermixing occurs without impacting the VT uniformity, gate leakage, mobility, and reliability. Well-behaved short-channel devices ( Lg ~ 100 nm, SS ~ 70 mV/dec, and DIBL ~ 65 mV/V) are demonstrated for both HfSiON and [HfSiON/Dy₂O₃ cap (5 Aring)] devices with NiSi-FUSI gates, corresponding to a similar . This capping approach, when combined with Ni-silicide FUSI phase engineering, allows (n-p) values up to 800 meV, making it promising for low- CMOS.     

Submicrometer Inversion-Type Enhancement-Mode InGaAs MOSFET With Atomic-Layer-Deposited Al2O3 as Gate Dielectric

High-performance inversion-type enhancement-mode n-channel In_0.53Ga_0.47As MOSFETs with atomic-layer-deposited (ALD) Al₂O₃ as gate dielectric are demonstrated. The ALD process on III-V compound semiconductors enables the formation of high-quality gate oxides and unpinning of Fermi level on compound semiconductors in general. A 0.5-mum gate-length MOSFET with an Al₂O₃ gate oxide thickness of 8 nm shows a gate leakage current less than 10^-4 A/cm² at 3-V gate bias, a threshold voltage of 0.25 V, a maximum drain current of 367 mA/mm, and a transconductance of 130 mS/mm at drain voltage of 2 V. The midgap interface trap density of regrown Al₂O₃ on In_0.53Ga_0.47As is ~1.4 x 10¹²/cm² ldr eV which is determined by low-and high-frequency capacitance-voltage method. The peak effective mobility is ~1100 cm² / V ldr s from dc measurement, ~2200 cm²/ V ldr s after interface trap correction, and with about a factor of two to three higher than Si universal mobility in the range of 0.5-1.0-MV/cm effective electric field.     

High-Performance Metal-Induced Laterally Crystallized Polycrystalline Silicon P-Channel Thin-Film Transistor With $hbox{TaN/HfO}_{2}$ Gate Stack Structure

In this letter, high-performance low-temperature poly-Si p-channel thin-film transistor with metal-induced lateral- crystallization (MILC) channel layer and TaN/HfO₂ gate stack is demonstrated for the first time. The devices of low threshold voltage V_TH ~ 0.095 V, excellent subthreshold swing S.S. ~83 mV/dec, and high field-effect mobility mu_FE ~ 240 cm²/V ldr s are achieved without any defect passivation methods. These significant improvements are due to the MILC channel film and the very high gate-capacitance density provided by HfO₂ gate dielectric with the effective oxide thickness of 5.12 nm.     

AlGaN/GaN MOS-HEMT With $hbox{HfO}_{2}$ Dielectric and $hbox{Al}_{2}hbox{O}_{3}$ Interfacial Passivation Layer Grown by Atomic Layer Deposition

We have developed a novel AlGaN/GaN metal-oxide-semiconductor high-electron mobility transistor using a stack gate HfO₂/Al₂O₃ structure grown by atomic layer deposition. The stack gate consists of a thin HfO₂ (30-A) gate dielectric and a thin Al₂O₃ (20- A) interfacial passivation layer (IPL). For the 50-A stack gate, no measurable C-V hysteresis and a smaller threshold voltage shift were observed, indicating that a high-quality interface can be achieved using a Al₂O₃ IPL on an AlGaN substrate. Good surface passivation effects of the Al₂O₃ IPL have also been confirmed by pulsed gate measurements. Devices with 1- mum gate lengths exhibit a cutoff frequency (fT) of 12 GHz and a maximum frequency of oscillation (f _MAX) of 34 GHz, as well as a maximum drain current of 800 mA/mm and a peak transconductance of 150 mS/mm, whereas the gate leakage current is at least six orders of magnitude lower than that of the reference high-electron mobility transistors at a positive gate bias.     

Characterizing Fluorine-Ion Implant Effects on Poly-Si Thin-Film Transistors With ${hbox{Pr}}_{2}{hbox{O}}_{3}$ Gate Dielectric

The fluorine ion implantation applied to the polycrystalline silicon thin-film transistors (poly-Si TFTs) with high-k Pr₂O₃ as gate dielectric is investigated for the first time. Using the Pr₂O₃ gate dielectric can obtain a high gate capacitance density and thin equivalent-oxide thickness, exhibiting a greatly enhancement in the driving capability of TFT device. Introducing fluorine ions into the poly-Si film by fluorine ion implantation technique can effectively passivate the trap states in the poly-Si film and at the Pr₂O₃/poly-Si interface to improve the device electrical properties. The Pr₂O₃ TFTs fabricated on fluorine-implanted poly-Si film exhibit significantly improved electrical performances, including lower threshold voltage, steeper subthreshold swing, higher field-effect mobility, lower off-state leakage current, and higher on/off current ratio, as compared with the control poly-Si Pr₂O₃ TFTs. Also, the incorporation of fluorine ions also improves the reliability of poly-Si Pr₂O₃ TFTs against hot-carrier stressing, which is attributed to the formation of stronger Si-F bonds. Furthermore, superior threshold-voltage rolloff characteristic is also demonstrated in the fluorine-implanted poly-Si Pr₂O₃ TFTs. Therefore, the proposed scheme is a promising technology for high-performance and high-reliability solid-phase crystallized poly-Si TFT.     

Improved Electrical Properties of Ge p-MOSFET With $ hbox{HfO}_{2}$ Gate Dielectric by Using $hbox{TaO}_{x} hbox{N}_{y}$ Interlayer

The electrical characteristics of germanium p-metal-oxide-semiconductor (p-MOS) capacitor and p-MOS field-effect transistor (FET) with a stack gate dielectric of HfO₂/TaOxNy are investigated. Experimental results show that MOS devices exhibit much lower gate leakage current than MOS devices with only HfO₂ as gate dielectric, good interface properties, good transistor characteristics, and about 1.7-fold hole-mobility enhancement as compared with conventional Si p-MOSFETs. These demonstrate that forming an ultrathin passivation layer of TaOxNy on germanium surface prior to deposition of high-k dielectrics can effectively suppress the growth of unstable GeOx, thus reducing interface states and increasing carrier mobility in the inversion channel of Ge-based transistors.     

Flicker-Noise Improvement in 100-nm $L_{g} hbox{Si}_{0.50}hbox{Ge}_{0.50}$ Strained Quantum-Well Transistors Using Ultrathin Si Cap Layer

This letter presents a record low flicker-noise spectral density in biaxial compressively strained p-channel 100-nm L_gSi_0.50Ge_0.50 quantum-well FETs (QWFETs) with ultrathin Si (~2 nm) barrier layer and 1-nm EOT hafnium silicate gate dielectric. The normalized power spectral density of I_d fluctuations (S_Id/I_d ²) in Si_0.50Ge_0.50 QWFETs exhibits significant improvement by ten times over surface channel unstrained Si pMOSFETs at high V_g due to strong confinement of holes within the high-mobility QW and strong quantization in the ultrathin Si barrier layer enabled by low-thermal-budget device processing. The noise behavior in strained QW devices is found to evolve from being correlated mobility fluctuation dominated across most of V_g range to being Hooge mobility fluctuation dominated at very high V_g.     

In0.52Al0.48As/In0.53Ga0.47As double-heterojunction p-n-p bipolar transistors grown bymolecular beam epitaxy

P-n-p In_0.52Al_0.48As/In_0.53Ga_0.47 As double-heterojunction bipolar transistors with a p⁺-InAs emitter cap layer grown by molecular-beam epitaxy have been realized and tested. A five-period 15-Å-thick In_0.53Ga_0.47As/InAs superlattice was incorporated between the In_0.53Ga_0.47As and InAs cap layer to smooth out the valence-band discontinuity. Specific contact resistance of 1×10^-5 and 2×10^-6 Ω-cm² were measured for nonalloyed emitter and base contacts, respectively. A maximum common emitter current gain of 70 has been measured for a 1500-Å-thick base transistor at a collector current density of 1.2×10³ A/cm². Typical current gains of devices with 50×50-μm² emitter areas were around 50 with ideality factors of 1.4     

High Density and Low Leakage Current in $ hbox{TiO}_{2}$ MIM Capacitors Processed at 300 $^{circ} hbox{C}$

We report Ir/TiO₂/TaN metal-insulator-metal capacitors processed at only 300degC, which show a capacitance density of 28 fF/mum² and a leakage current of 3 times 10^-8 (25degC) or 6 times 10^-7 (125degC) A/cm² at -1 V. This performance is due to the combined effects of 300degC nanocrystallized high-kappa TiO₂, a high conduction band offset, and high work-function upper electrode. These devices show potential for integration in future very-large-scale-integration technologies.     

Carrier Transportation Mechanism of the $hbox{TaN}/ hbox{HfO}_{2}/hbox{IL}/hbox{Si}$ Structure With Silicon Surface Fluorine Implantation

In this paper, the current transportation mechanism of HfO₂ gate dielectrics with a TaN metal gate and silicon surface fluorine implantation is investigated. Based on the experimental results of the temperature dependence of gate leakage current and Fowler-Nordheim tunneling characteristics at 77 K, we have extracted the current transport mechanisms and energy band diagrams for TaN/HfO₂/IL/Si structures with fluorine incorporation, respectively. In particular, we have obtained the following physical quantities: 1) fluorinated and as-deposited interfacial layer (IL)/Si barrier heights (or conduction band offsets) at 3.2 and 2.7 eV; 2) TaN/fluorinated and as-deposited HfO₂ barrier heights at 2.6 and 1.9 eV; and 3) effective trapping levels at 1.25 eV (under both gate and substrate injections) below the HfOF conduction band and at 1.04 eV (under gate injection) and 1.11 eV (under substrate injection) below the HfO₂ conduction band, which contributes to Frenkel-Poole conduction.     

0.12 μm transferred-substrateIn0.52Al0.48As/In0.53Ga0.47As HEMTs on silicon wafer

New In_0.52Al_0.48As/In_0.53Ga_0.47 As transferred-substrate high electron mobility transistors (TS-HEMTs) have been successfully fabricated on 2-in Silicon substrate with 0.12 μm T-shaped gate length. These new TS-HEMTs exhibit typical drain currents of 450 mA/mm and extrinsic transconductance up to 770 mS/mm. An extrinsic current gain cutoff frequency f_T of 185 GHz is obtained. That result is the first reported for In_0.52Al_0.48As/In_0.53Ga_0.47 As TS-HEMTs on Silicon substrate     

High-Performance Inversion-Type Enhancement-Mode InGaAs MOSFET With Maximum Drain Current Exceeding 1 A/mm

High-performance inversion-type enhancement- mode (E-mode) n-channel In_0.65Ga_0.35As MOSFETs with atomic-layer-deposited Al₂O₃ as gate dielectric are demonstrated. A 0.4-mum gate-length MOSFET with an Al₂O₃ gate oxide thickness of 10 nm shows a gate leakage current that is less than 5 times 10^-6 A/cm² at 4.0-V gate bias, a threshold voltage of 0.4 V, a maximum drain current of 1.05 A/mm, and a transconductance of 350 mS/mm at drain voltage of 2.0 V. The maximum drain current and transconductance scale linearly from 40 mum to 0.7 mum. The peak effective mobility is ~1550 cm²/V ldr s at 0.3 MV/cm and decreases to ~650 cm²/V ldr s at 0.9 MV/cm. The obtained maximum drain current and transconductance are all record-high values in 40 years of E-mode III-V MOSFET research.