Immediate release of ibuprofen from Fujicalin®-based fast-dissolving self-emulsifying tablets

Background: Drug release from a solid form of self-emulsifying drug delivery system (SEDDS) has greatly been limited due to strong adsorption and physical interaction with carriers. To facilitate drug release process in the stomach, an acid-soluble powderizing carrier, Fujicalin^® was evaluated together with different disintegrants and hydrophilic lubricants. Method: Immediate-release self-emulsifying tablets (IR-SETs) of ibuprofen (IBU) was prepared with solidified SEDDS of IBU, various disintegrants, and lubricants, and drug release was evaluated to develop IR-SET that can release IBU with a similar IBU release rate to that obtained with liquid SEDDS. Results: The liquid SEDDS consisted of Capryol 90, Cremophor EL, Labrasol, and IBU at a ratio of 3:4:3:3, and was solidified with various adsorbents. The powderized SEDDS was tabletted by a direct compression. Fujicalin^®-based SEDDS tablets demonstrated remarkably higher dissolution rate of IBU compared with Neusilin^® and Neosyl^®-based SEDDS tablets. The IR-SET formula of IBU prepared with Fujicalin^® as an adsorbent, Polyplasdone^® as a disintegrant, and sodium bicarbonate as a co-disintegrant showed over 90% of initially loaded dose of IBU released within 5?min in a stimulated gastric juice (pH 1.2), exhibiting almost equivalent rate of IBU release to that shown by liquid SEDDS. The particle size analysis revealed no significant differences in droplet sizes of the microemulsions formed from liquid (116?nm) and IR-SET (110?nm). Conclusion: The novel IR-SET can be promising as a fast-releasing SEDDS tablet of IBU for fast onset of action.     

Development of Polysaccharide-Based Colon Targeted Drug Delivery Systems for the Treatment of Amoebiasis

ABSTRACT

The main focus of this study is to develop colon targeted drug delivery systems for metronidazole (MTZ). Tablets were prepared using various polysaccharides or indigenously developed graft copolymer of methacrylic acid with guar gum (GG) as a carrier. Various polysaccharides such as GG, xanthan gum, pectin, carrageenan, β-cyclodextrin (CD) or methacrylic acid-g-guar (MAA-g-GG) gum have been selected and evaluated. The prepared tablets were tested in vitro for their suitability as colon-specific drug delivery systems. To further improve the colon specificity, some selected tablet formulations were enteric coated with Eudragit-L 100 to give protection in an acidic environment. Drug release studies were performed in simulated gastric fluid (SGF) for 2 hr followed by simulated intestinal fluid (SIF) at pH 7.4. The dissolution data demonstrate that the rate of drug release is dependent upon the nature and concentration of polysaccharide/polymer used in the formulations. Uncoated tablets containing xanthan gum or mixture of xanthan gum with graft copolymer showed 30–40% drug release during the initial 4–5 hr, whereas for tablets containing GG with the graft copolymer, it was 70%. After enteric coating, the release was drastically reduced to 18–24%. The other polysaccharides were unable to protect drug release under similar conditions. Preparations with xanthan gum as a matrix showed the time-dependent release behavior. Further, in vitro release was performed in the dissolution media with rat caecal contents. Results indicated an enhanced release when compared to formulations studied in dissolution media without rat caecal contents, because of microbial degradation or polymer solubilization. The nature of drug transport was found to be non-Fickian in case of uncoated formulations, whereas for the coated formulations, it was found to be super-Case-II. Statistical analyses of release data indicated that MTZ release is significantly affected by the nature of the polysaccharide used and enteric coating of the tablet. Differential scanning calorimetry indicated the presence of crystalline nature of drug in the formulations.     

Preparation and optimization of doxorubicin-loaded albumin nanoparticles using response surface methodology

Background: The objective of this work was to optimize the preparation of doxorubicin-loaded albumin nanoparticles (Dox-A-Nps) through desolvation procedures using response surface methodology (RSM). A central composite design (CCD) for four factors at five levels was used in this study.

Method: Albumin nanoparticles were prepared through a desolvation method and were optimized in the aid of CCD. Albumin concentration, amount of doxorubicin, pH values, and percentage of glutaraldehyde were selected as independent variables, particle size, zeta potential, drug loading, encapsulation efficiency, and nanoparticles yield were chosen as response variables. RSM and multiple response optimizations utilizing a quadratic polynomial equation were used to obtain an optimal formulation.

Results: The optimal formulation for Dox-A-Nps was composed of albumin concentration of 17?mg/ml, amount of doxorubicin of 2?mg/ml, pH value is 9 and percentage of glutaraldehyde of 125% of the theoretic amount, under which the optimized conditions gave rise to the actual average value of mean particle size (151?±?0.43?nm), zeta potential (?18.8?±?0.21 mV), drug loading efficiency (21.4?±?0.70%), drug entrapment efficiency (76.9?±?0.21%) and nanoparticles yield (82.0?±?0.34%). The storage stability experiments proved that Dox-A-Nps stable in 4°C over the period of 4 months. The in vitro experiments showed a burst release at the initial stage and followed by a prolonged release of Dox from albumin nanoparticles up to 60?h.

Conclusions: This study showed that the RSM-CCD method could efficiently be applied for the modeling of nanoparticles, which laid the foundation of the further research of immuno nanoparticles.     

Lysozyme-loaded lipid-polymer hybrid nanoparticles: preparation,characterization and colloidal stability evaluation

Context: Lipid-polymer hybrid nanoparticles (LPNPs) are polymeric nanoparticles enveloped by lipid layers, which have emerged as a potent therapeutic nanocarrier alternative to liposomes and polymeric nanoparticles.

Objective: The aim of this work was to develop, characterize and evaluate LPNPs to deliver a model protein, lysozyme.

Materials and methods: Lysozyme-loaded LPNPs were prepared by using the modified w/o/w double-emulsion-solvent-evaporation method. Poly-?-caprolactone (PCL) was used as polymeric core material and tripalmitin:lechitin mixture was used to form a lipid shell around the LPNPs. LPNPs were evaluated for particle size distribution, zeta potential, morphology, encapsulation efficiency, in vitro drug release, stability and cytotoxicity.

Results: The DLS measurement results showed that the particle size of LPNPs ranged from 58.04?±?1.95?nm to 2009.00?±?0.52?nm. The AFM and TEM images of LPNPs demonstrate that LPNPs are spherical in shape. The protein-loading capacity of LPNPs ranged from 5.81% to 60.32%, depending on the formulation parameters. LPNPs displayed a biphasic drug release pattern with a burst release within 1?h, followed by sustained release afterward. Colloidal stability results of LPNPs in different media showed that particle size and zeta potential values of particles did not change significantly in all media except of FBS 100% for 120?h. Finally, the results of a cellular uptake study showed that LPNPs were significantly taken up by 83.3% in L929 cells.

Conclusion: We concluded that the LPNPs prepared with PCL as polymeric core material and tripalmitin:lechitin mixture as lipid shell should be a promising choice for protein delivery.     

Preparation of azithromycin nanosuspensions by reactive precipitation method

Purpose: The aim of this work was to prepare azithromycin (AZI) nanosuspensions to increase the solubility and dissolution rate.

Method: AZI nanosuspensions were prepared by the combination of reactive precipitation and freeze-drying in presence of biocompatible stabilizer. Formulation and process variables affecting the characteristics of nanosuspensions were optimized. Various tests were carried out to study the physicochemical characteristics of AZI nanosuspensions.

Results: The nanosuspensions were parenterally acceptable and autoclavable, because soybean lecithin was the stabilizer of choice and no organic solvents were used during the preparation. The mean particle size and zeta potential of the AZI nanosuspensions were about 200?nm (±20?nm) and ?36.7 mV (±7.6 mV), respectively. Solid nanoparticles were obtained by lyophilization of the nanosuspensions and nanosuspensions rapidly reconstituted when the nanoparticles were dispersed in water. X-ray diffraction and differential scanning calorimetry analysis showed that the crystal state of nanoparticles was amorphous. Solubility and in vitro release studies indicated that the saturated solubility and dissolution rate increased obviously in comparison of raw AZI. The nanoparticles were physically stable over a period of 5 months as demonstrated by unchanged crystallinity and stable particle size when stored at room temperature and protected from humidity.

Conclusion: The results suggested that reactive precipitation is an effective way to prepare AZI nanosuspensions with increased solubility and dissolution rate.     

Carbamazepine Modified Release Dosage Forms

Abstract

The preparation of sustained release dosage forms of Carbamazepine (anti-epileptic drug characterized by a very low water solubility and by a short half life on chronique dosing) was carried out.

These formulations were obtained in two different steps:

a) modified release granules were prepared by the loading of cross-linked sodium carboxymethylcellulose (swellable polymer), with the drug and an enteric polymer. Cellulose acetate phthalate, methacrylic acid – methacrylic acid methyl ester copolymer (usually employed as enteric coating agents) and cellulose acetate trimellitate (a new enteric polymer) were used in different weight ratios.

b) some sustained release dosage forms were prepared tabletting physical mixtures of the modified release granules with different weight ratios of hydroxypropylmethylcellulose.

In vitro dissolution tests of modified release granules in gastric fluid (USP XXI) showed a modulation of the drug release, while in intestinal fluid (USP XXI) a quick drug dissolution was observed.

In vitro dissolution tests of sustained release dosage forms, performed varying during the test, the pH of the dissolution medium, (hydrochloric acid pH 1 from 0 to 2 hours and phosphate buffer pH 6.8 from 2 to 18 hours) showed that the determining factors in the controlling release of the drug are: the type and amount of enteric polymer constituting the granules and the amount of hydroxy-propylmethylcellulose mixed with them.     

Mucoadhesive nanostructured lipid carriers (NLCs) as potential carriers for improving oral delivery of curcumin

Purpose: To examine effects of polymer types on the mucoadhesive properties of polymer-coated nanostructured lipid carriers (NLCs).

Experiment: Curcumin-loaded NLCs were prepared using a warm microemulsion technique followed by coating particle surface with mucoadhesive polymers: polyethylene glycol400 (PEG400), polyvinyl alcohol (PVA), and chitosan (CS). The physicochemical properties and entrapment efficacy were examined. In vitro mucoadhesive studies were assessed by wash-off test. In addition, the stability of mucoadhesive NLCs in gastrointestinal fluids and the pattern of drug release were also investigated.

Findings: The obtained nanoparticles showed spherical shape with size ranging between 200?nm and 500?nm and zeta potential between ?37 and ?9?mV depending on the type of polymer coating. Up to 80% drug entrapment efficacy was observed. In vitro mucoadhesive studies revealed that PEG-NLCs and PVA-NLCs were adhered strongly to freshly porcine intestinal mucosa, more than 2-fold mucoadhesive compared to CS-NLCs and uncoated-NLCs. The particle size of all polymer-coated NLCs could be maintained in both simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) suggesting good physical stability in physiological fluid. In contrast, uncoated-NLCs showed particle aggregation in SGF. In vitro dissolution studies revealed a fast release characteristic.     

Effect of chitosan multilayers encapsulation on controlled release performance of drug-loaded superparamagnetic alginate nanoparticles

The near monodispersed ibuprofen-loaded superparamagnetic alginate (AL/IBU/Fe₃O₄) nanoparticles with particles size less than 200 nm were prepared via the facile heterogeneous coprecipitation of the superparamagnetic Fe₃O₄ nanoparticles, sodium alginate (AL) and the model drug ibuprofen (IBU) from the aqueous dispersion. Then the chitosan multilayers were self-assembled onto the AL/IBU/Fe₃O₄ nanoparticles to produce novel magnetic-targeted controlled release drug delivery system, with chitosan as the polycation (CS) and the carboxymethyl chitosan (CMCS) as the polyanion. The drug controlled releasing behaviors of the AL/IBU/Fe₃O₄ nanoparticles and the CS multilayers encapsulated ibuprofen-loaded superparamagnetic alginate ((AL/IBU/Fe₃O₄)@(CS–CMCS)₃) nanoparticles were compared in the different pH media. In media with the same pH value, the encapsulated vessels exhibited the slower releasing rate.     

Mannosylated solid lipid nanoparticles for lung-targeted delivery of Paclitaxel

Objective: The present study discusses paclitaxel (PTX)-loaded mannosylated-DSPE (Distearoyl-phosphatidyl-ethanolamine) solid lipid nanoparticles (M-SLNs) using mannose as a lectin receptor ligand conjugate for lung cancer targeting and to increase the anticancer activity of PTX against A549 lung’s epithelial cancer cells.

Materials and methods: The PTX-SLNs were prepared by solvent injection method and mannose was conjugated to the free amine group of stearylamine. The M-SLNs obtained were characterized for their particle size, polydispersity index, zeta potential and morphology by transmission electron microscope.

Results: The M-SLNs were spherical in shape with 254?±?2.3?nm average size, positive zeta potential (3.27?mV), 79.4?±?1.6 drug entrapment efficiency and showed the lower extent of drug release 40% over 48?h in vitro. Cytotoxicity study on A549 cell lines and biodistrubtion study of drug revealed that M-SLNs deliver a higher concentration of PTX as compared to PTX-SLNs in an alveolar cell site.

Discussion and conclusion: These results suggested that mannosylated M-SLNs are safe and potential vector for lung cancer targeting.     

Preparation,characterization, in vivo biodistribution and pharmacokinetic studies of donepezil-loaded PLGA nanoparticles for brain targeting

Objective: Alzheimer’s disease (AD) is a progressive neurodegenerative disorder manifested by cognitive, memory deterioration and variety of neuropsychiatric symptoms. Donepezil is a reversible cholinesterase inhibitor used for the treatment of AD. The purpose of this work is to prepare a nanoparticulate drug delivery system of donepezil using poly(lactic-co-glycolic acid) (PLGA) for sustained release and efficient brain targeting.

Materials and methods: PLGA nanoparticles (NPs) were prepared by the solvent emulsification diffusion–evaporation technique and characterized for particle size, particle-size distribution, zeta potential, entrapment efficiency, drug loading and interaction studies and in vivo studies using gamma scintigraphy techniques.

Results and discussion: The size of drug-loaded NPs (drug polymer ratio 1:1) was found to be 89.67?±?6.43?nm. The TEM and SEM images of the formulation suggested that particle size was within 20–100?nm and spherical in shape, smooth morphology and coating of Tween-80 on the NPs was clearly observed. The release behavior of donepezil exhibited a biphasic pattern characterized by an initial burst release followed by a slower and continuous sustained release. The biodistribution studies of donepezil-loaded PLGA NPs and drug solution via intravenous route revealed higher percentage of radioactivity per gram in the brain for the nanoparticulate formulation as compared with the drug solution (p?Conclusion: The high concentrations of donepezil uptake in brain due to coated NPs may help in a significant improvement for treating AD. But further, more extensive clinical studies are needed to check and confirm the efficacy of the prepared drug delivery system.     

Lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan as a new strategy for oral delivery of insulin: in vitro,ex vivo and in vivo characterizations

Objective: The purpose of this research was the development, in vitro, ex vivo and in vivo characterization of lyophilized insulin nanoparticles prepared from quaternized N-aryl derivatives of chitosan.

Methods: Insulin nanoparticles were prepared from methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4 pyridinyl) and methylated N-(benzyl). Insulin nanoparticles containing non-modified chitosan and also trimethyl chiotsan (TMC) were also prepared as control. The effects of the freeze-drying process on physico-chemical properties of nanoparticles were investigated. The release of insulin from the nanoparticles was studied in vitro. The mechanism of the release of insulin from different types of nanoparticles was determined using curve fitting. The secondary structure of the insulin released from the nanoparticles was analyzed using circular dichroism and the cell cytotoxicity of nanoparticles on a Caco-2 cell line was determined. Ex vivo studies were performed on excised rat jejunum using Frantz diffusion cells. In vivo studies were performed on diabetic male Wistar rats and blood glucose level and insulin serum concentration were determined.

Results: Optimized nanoparticles with proper physico-chemical properties were obtained. The lyophilization process was found to cause a decrease in zeta potential and an increase in PdI as well as and a decrease in entrapment efficiency (EE%) and loading efficiency (LE%) but conservation in size of nanoparticles. Atomic force microscopy (AFM) images showed non-aggregated, stable and spherical to sub-spherical nanoparticles. The in vitro release study revealed higher release rates for lyophilized compared to non-lyophilized nanoparticles. Cytotoxicity studies on Caco-2 cells revealed no significant cytotoxicity for prepared nanoparticles after 3-h post-incubation but did show the concentration-dependent cytotoxicity after 24?h. The percentage of cumulative insulin determined from ex vivo studies was significantly higher in nanoparticles prepared from quaternized aromatic derivatives of chitosan. In vivo data showed significantly higher insulin intestinal absorption in nanoparticles prepared from methylated N-(4-N, N-dimethylaminobenzyl) chitosan nanoparticles compared to trimethyl chitosan.

Conclusion: These data obtained demonstrated that as the result of optimized physico-chemical properties, drug release rate, cytotoxicity profile, ex vivo permeation enhancement and increased in vivo absorption, nanoparticles prepared from N-aryl derivatives of chitosan can be considered as valuable method for the oral delivery of insulin.     

Preparation and in vitro evaluation of meloxicam-loaded PLGA nanoparticles on HT-29 human colon adenocarcinoma cells

Context: The inhibitors of cyclooxygenase (COX)-2 play an important role in cancer chemoprevention. Certain COX-2 inhibitors exert antiproliferative and pro-apoptotic effects on cancer cells.

Objective: In this study, meloxicam, which is an enolic acid-type preferential COX-2 inhibitor, was encapsulated in poly(D,L-lactide-co-glycolide) (PLGA) nanoparticles (NPs) to maintain local high concentration, and its efficacy was determined.

Methods: NPs were prepared by using salting-out and emulsion-evaporation steps. Meloxicam-loaded NP formulations were evaluated with respect to the drug loading, particle size, polydispersity index, zeta potential, drug release rate, and residual poly(vinyl alcohol) (PVA) percentage. The effects of PLGA and PVA molecular weight variations on the physicochemical properties of NPs were investigated. Stability of meloxicam in NPs was assessed over 3 months. COX-2 expressing human colon adenocarcinoma cell line HT-29 was used in cellular uptake and viability assays.

Results: NPs had a spherical shape and a negative zeta potential, and their size ranged between 170–231?nm with a lower polydispersity index. NPs prepared with high molecular weight PLGA were shown to be physically stable over three months at 4°C. The increase in molecular weight of the polymer and emulsifier reduced the in vitro release rate of meloxicam from NPs. Meloxicam-loaded NPs showed cytotoxic effects on HT-29 cells markedly at 800 µM. Cancer cells had high uptake of coumarin-6-loaded NPs.

Conclusion: The PLGA NPs developed in this study can be a potentially effective drug delivery system of meloxicam for the treatment of colon cancer.     

Design and evaluation of D-α tocopheryl polyethylene glycol 1000 succinate emulsified poly-ϵ-caprolactone nanoparticles for protein/peptide drug delivery

Background: Incorporation of proteins/peptide drugs into nanoparticulate drug delivery system is one of the effective approaches to increase the stability of protein/peptide drugs against enzymatic degradation, to release them in a controlled fashion and to achieve site-specific drug delivery.

Objective: Our goal was to design and evaluate poly-?-caprolactone (PCL) nanoparticles using bovine serum albumin (BSA) as a model protein. d-α-tocopheryl polyethylene glycol 1000 (vitamin E TPGS) was used as an emulsifier in the fabrication of these nanoparticles.

Methods: Double emulsion solvent evaporation method was employed to formulate BSA-loaded PCL nanoparticles and the nanoparticles thus prepared were further characterized.

Results: The size of BSA-loaded PCL nanoparticles were in the range of 400–500?nm with a polydispersity index (PDI) of 0.195 and zeta potential was about ?28.6 mV. Scanning electron microscopy (SEM) confirmed the presence of smooth and spherical surface of nanoparticles. Encapsulation efficiency was about 85% and a yield of 70–75% was attained. BSA was released in a biphasic pattern with an initial 20% release within 2?h followed by a slower release patter over 5 days. Flow cytometry and fluorescence microscopy was used to study the uptake of these nanoparticles. Circular dichroism (CD) results showed that there was no significant effect of formulation conditions on the secondary structure of BSA.

Conclusion: Based on the results obtained, these TPGS-emulsified PCL nanoparticles proved to be potential carriers for the delivery of protein/peptide drugs.     

Complexation as an approach to entrap cationic drugs into cationic nanoparticles administered intranasally for Alzheimer's disease management: preparation and detection in rat brain

Abstract

Objective: Complexation was investigated as an approach to enhance the entrapment of the cationic neurotherapeutic drug, galantamine hydrobromide (GH) into cationic chitosan nanoparticles (CS-NPs) for Alzheimer’s disease management intranasally. Biodegradable CS-NPs were selected due to their low production cost and simple preparation. The effects of complexation on CS-NPs physicochemical properties and uptake in rat brain were examined.

Methods: Placebo CS-NPs were prepared by ionic gelation, and the parameters affecting their physicochemical properties were screened. The complex formed between GH and chitosan was detected by the FT-IR study. GH/chitosan complex nanoparticles (GH-CX-NPs) were prepared by ionic gelation, and characterized in terms of particle size, zeta potential, entrapment efficiency, in vitro release and stability for 4 and 25?°C for 3 months. Both placebo CS-NPs and GH-CX-NPs were visualized by transmission electron microscopy. Rhodamine-labeled GH-CX-NPs were prepared, administered to male Wistar rats intranasally, and their delivery to different brain regions was detected 1?h after administration using fluorescence microscopy and software-aided image processing.

Results: Optimized placebo CS-NPs and GH-CX-NPs had a diameter 182 and 190?nm, and a zeta potential of +40.4 and +31.6?mV, respectively. GH encapsulation efficiency and loading capacity were 23.34 and 9.86%, respectively. GH/chitosan complexation prolonged GH release (58.07%?±?6.67 after 72?h), improved formulation stability at 4?°C in terms of drug leakage and particle size, and showed insignificant effects on the physicochemical properties of the optimized placebo CS-NPs (p?>?0.05). Rhodamine-labeled GH-CX-NPs were detected in the olfactory bulb, hippocampus, orbitofrontal and parietal cortices.

Conclusion: Complexation is a promising approach to enhance the entrapment of cationic GH into the CS-NPs. It has insignificant effect on the physicochemical properties of CS-NPs. GH-CX-NPs were successfully delivered to different brain regions shortly after intranasal administration suggesting their potential as a delivery system for Alzheimer’s disease management.     

Development of flurbiprofen-loaded nanoparticles with a narrow size distribution using sucrose

Objective: A novel flurbiprofen-loaded nanoemulsion which gave uniform emulsion droplets with a narrow size distribution was previously reported to be prepared using membrane emulsification method. The purpose of this study is to develop a novel flurbiprofen-loaded nanoparticle with a narrow size distribution and improved bioavailability.

Method: The nanoparticle was prepared by solidifying nanoemulsion using sucrose as a carrier via spray drying method. Its physicochemical properties were investigated using SEM, DSC and PXRD. Furthermore, dissolution and bioavailability in rats were evaluated compared to a flurbiprofen-loaded commercial product.

Results: The flurbiprofen-loaded nanoparticles with flurbiprofen/sucrose/surfactant mixture (1/20/2, weight ratio) gave good solidification and no stickiness. They associated with about 70?000-fold improved drug solubility and had a mean size of about 300 nm with a narrow size distribution. Flurbiprofen was present in a changed amorphous state in these nanoparticles. Moreover, the nanoparticles gave significantly shorter T_max, and higher AUC and C_max of the drug compared to the commercial product (p?0.05). In particular, they showed about nine-fold higher AUC of the drug than did the commercial product

Conclusion: These flurbiprofen-loaded nanoparticles prepared with sucrose by the membrane emulsification and spray drying method would be a potential candidate for orally delivering poorly water-soluble flurbiprofen with enhanced bioavailability.     

Solid lipid nanoparticles as vesicles for oral delivery of olmesartan medoxomil: formulation,optimization and in vivo evaluation

Objective: Olmesartan medoxomil (OLM) is an antihypertensive drug with low oral bioavailability (28%) resulting from poor aqueous solubility, presystemic metabolism and P-glycoprotein mediated efflux. The present investigation studies the role of lipid nanocarriers in enhancing the OLM bioavailability through oral delivery.

Materials and methods: Solid lipid nanoparticles (SLN) were prepared by solvent emulsion-evaporation method. Statistical tools like regression analysis and Pareto charts were used to detect the important factors effecting the formulations. Formulation and process parameters were then optimized using mean effect plot and contour plots. The formulations were characterized for particle size, size distribution, surface charge, percentage of drug entrapped in nanoparticles, drug–excipients interactions, powder X-ray diffraction analysis and drug release in vitro.

Results and discussion: The optimized formulation comprised glyceryl monostearate, soya phosphatidylcholine and Tween 80 as lipid, co-emulsifier and surfactant, respectively, with an average particle size of 100?nm, PDI 0.291, zeta potential of ?23.4?mV and 78% entrapment efficiency. Pharmacokinetic evaluation in male Sprague Dawley rats revealed 2.32-fold enhancement in relative bioavailability of drug from SLN when compared to that of OLM plain drug on oral administration.

Conclusion: In conclusion, SLN show promising approaches as a vehicle for oral delivery of drugs like OLM.     

Novel photothermal-responsive sandwich-structured mesoporous silica nanoparticles: synthesis,characterization, and application for controlled drug delivery

Novel thermal nanoparticles [hollow mesoporous silica nanospheres (HMSNs)–poly (N-isopropyl acrylamide-acrylic acid) PNIPAM-AA] were developed with Ag nanoparticles (AgNps) as the core, mesoporous silica nanoparticles as the layer, and thermally responsive polymers PNIPAM-AA as the shell. The AgNps had good photothermal effects, PNIPAM-AA was responsive to temperature, the combination of AgNps and PNIPAM-AA could be used as a photothermal-responsive switch for drug release, and HMSNs greatly increased the drug loading of the carrier. The samples were characterized by means of scanning electron microscopy, transmission electron microscopy, N₂ adsorption–desorption, thermogravimetric analysis, Fourier transform infrared spectroscopy, and UV–Vis absorption spectra. The results showed that Ag@HMSN nanoparticles possessed a uniform diameter (330 nm), high specific surface area (822.45 m²/g), and mesoporous pore size (2.75 nm). Using ibuprofen (IBU) as a model drug, the release process was monitored under in vitro conditions to investigate its release characteristics at different temperatures. The results showed that the nanoparticles had a significant regulatory effect on IBU release.

Graphical abstract

     

Development and comparative evaluation of in vitro,in vivo properties of novel controlled release compositions of paroxetine hydrochloride hemihydrate as against Geomatrix™ platform technology

The objective of this study is to develop, in vitro and in vivo evaluation of novel approaches for controlled release of paroxetine hydrochloride hemihydrate (PHH) in comparison to patented formulation PAXIL CR^® tablets of GlaxoSmithKline (Geomatrix? technology). In one of the approaches, hydrophilic core matrix tablets containing 85% of the dose were prepared and further coated with methacrylic acid copolymer to delay the release. An immediate release coating of 15% was given as top coat. The tablets were further optionally coated using ethyl cellulose. In the second approach, hydrophobic matrix core tablets containing metharylic acid copolymer were prepared. In the third approach, PHH was granulated with enteric polymer and further hydrophobic matrix core tablets were prepared. The effect of polymer concentration, level of enteric coating on drug release was evaluated by in vitro dissolution study by varying dissolution apparatus and the rotation speeds. It was found that increase in concentration of high viscosity hydroxypropylmethylcellulose (HPMC) resulted in reduction of the release rate. The drug release was observed to be dependent on the level of enteric coating and ethyl cellulose coating, being slower at increased coating. The release mechanism of PHH followed zero-order shifting to dissolution dependent by the increase of HPMC content. The formulation was stable without change in drug release rate. In vivo study in human volunteers confirmed the similarity between test and innovator formulations. In conclusion, HPMC-based matrix tablets, which were further coated using methacrylic acid copolymer, were found to be suitable for the formulation of single layer-controlled release PHH.     

Effect of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer on bioadhesion and release rate property of eplerenone pellets

Abstract

The present study involved the design and development of oral bioadhesive pellets of eplerenone. A solid dispersion of eplerenone was developed with a hydrophilic carrier, polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (Soluplus^®). Bioadhesive pellets were prepared from this solid dispersion using a combination of HPMC K4M and Carbopol 934P. Both the solid dispersion and the pellets were evaluated for various physicochemical properties such as solubility, entrapment efficiency, drug content, surface morphology, mucoadhesion and swelling behavior. Analysis carried out using FT-IR, DSC and XRD found no interaction between the eplerenone and excipients. The solid dispersion had irregular-shaped smooth-surfaced particles of diameter 265?±?105.5?μm. In TEM analysis, eplerenone particles of size 79–120?nm were found. The solubility and dissolution of eplerenone in the Soluplus^®-based solid dispersion were 5.26 and 2.50 times greater, respectively. Investigation of the swelling behavior of the pellets showed that the thickness of the gel layer increased continuously over the duration of the study. Moreover, a correlation was observed between the thickness and strength of the gel layer and the percentage release. The mechanism of drug release was found to be non-Fickian (anomalous), with the release kinetics approaching first-order kinetics. The bioavailability of the eplerenone bioadhesive pellet formulation was studied using Wistar rats and was found to be improved. An in vivo mucoadhesion study showed that the pellets are retained for 24?h in rabbits. It was concluded that Soluplus^® had a positive effect on the solubility and dissolution of pellets without affecting the bioadhesion.     

Solid self microemulsification of Atorvastatin using hydrophilic carriers: a design

Context: Atorvastatin has a limited advantage to formulate oral dosage forms.

Objective: To enhance the solubility of Atorvastatin and to design the suitable solid self-microemulsifying drug delivery systems (S-SMEDDS)

Materials and methods: The clear and transparent self-microemulsifying drug delivery system (SMEDDS) were formulated using coconut oil and isopropyl myristate as lipid phases; Tween 80 as surfactant; PEG 400 and glycerin as co-surfactant at 2:1, 3:1, 1:2 and 1:3 ratio. The pseudo ternary phase diagrams were constructed to identify the microemulsion region. The SMEDDS were evaluated for zeta potential, poly dispersity index, globule size, pH, viscosity and drug release. The solid SMEDDS were developed by employing adsorption and melt granulation methods. The S-SMEDDS were evaluated for micromeritics, morphology, solid state property, reconstitution ability, drug release and stability.

Results: The micro formulations formed with particle size of 25?nm had shown a 3-folds rise in drug release. The solid SMEDDS had reconstituted to a good microemulsion rapidly in 1–3?min, with a release of 94.62% at the end of 30?min and behaved as immediate releasing capsules. Their shelf-life was found to be 1.3 years.

Discussion: The 1:3 ratio SMEDDS had shown more drug release owing to their less particle size. The solid SMEDDS had shown an increased dissolution profiles than atorvastatin. The solid state of the drug had changed in formulation inferring their enhanced solubility.

Conclusion: The solid form of atorvastatin liquid SMEDDS had been formulated successfully with enhanced shelf life and solubility.