相变储能冷藏隔热板的应用

分析了传统冷藏集装箱的结构和传热特点,指出了传统冷藏集装箱隔热保温的局限性,提出了使用相变储能材料的隔热板能够减少冷藏车的能耗和费用。阐述了相变储能的原理,总结了相变储能材料在减少室内温度波动和节能方面的应用,提出并设计了一种使用相变储能材料的节能型冷藏集装箱隔热板,可为同类设计提供参考。     

Optimal roof structure with multilayer cooling function materials for building energy saving

Both cool roof and phase change thermal storage are promising technologies in decreasing building energy consumption. Combining these two technologies is likely to further enhance the thermal comfort of the building as well as reduce air condition loads. In this paper, the cooling performance and energy-saving effects of four types of roof (normal roof, phase change material [PCM] roof, cool roof, and cool PCM roof [cool roof coupled with PCM]) were investigated under a simulated sunlight. Experimental results indicate that compared with normal roof, the other three roofs are able to narrow the indoor temperature fluctuation and decrease the heat flow entering into the room. Among them, cool PCM roof gave the best energy-saving effect that can lower the indoor temperature and heat entering into rooms by 6.6°C and 52.9%, respectively. Besides, the PCM location, PCM thickness, and insulation thickness exerted great impacts on the cooling performance of the roof. Placing the PCM on the internal layer beneath the extruded polystyrene (XPS) insulation board can make the indoor temperature 1.2°C lower than that on the middle layer. Although thicker PCM panels or insulation boards can provide a better thermal insulation, 5 mm in PCM thickness and 20 mm in insulation thickness are enough to guarantee the indoor temperature of cool PCM roof system at a comfortable range (22°C-28°C) for a whole day. These findings will give guidance in designing buildings with a light and compact roof structure to decrease energy consumption and improve comfort level.     

Research progress on heat transfer enhancement technology of phase change energy storage

相变储能是通过相变材料吸/放热过程来实现能量储存的技术,它能够解决热量供需时间、空间和强度上的不匹配,并以其高储能密度成为储能领域的研究热点,但由于相变材料的热导率较低,使其应用受到限制。针对相变储能材料熔化/凝固过程中热导率低引起的传热速率慢的问题,从优化储能设备结构、添加剂提高相变材料热导率以及联合强化传热技术三方面综述国内外相变材料储能强化传热技术的最新进展。通过比较各种强化传热方式的优劣,实验和模拟均显示复合强化传热即可解决相变材料热导率低,又增大传热面积,从而提高相变材料的传热性能;多孔金属作为导热添加剂增强导热效果更好;并提出了相变储能强化传热技术未来需要解决的相关技术难题。     

相变储能建筑材料的研究进展

相变储能建筑材料是相变材料与建材基体复合制备的一种新型储能建筑材料。本文分析了相变材料的筛选和改进方法及其封装技术的研究现状,介绍了相变材料与建材基体复合工艺,系统阐述了相变储能建筑材料的作用机理和应用现状,并指出了相变储能建筑材料在实际应用中存在的一些问题,最后展望了相变储能建筑材料的发展前景。     

Comparative study of room temperature control in buildings with and without the use of PCM in walls

The concept of thermal energy storage in building gains a specific importance in the present energy scenario related to energy consumption and indoor thermal comfort. The material used to store the thermal energy which undergoes a phase change referred as PCM and it is considered as a possible solution for reducing energy consumption in the building by storing and releasing heat within a certain temperature range; it raises the building inertia and also stabilizes indoor air temperature fluctuations. The room temperature is controlled by imposing PCM inside the walls. An attempt has been made to compare room air temperature with and without the use of PCM inside the walls of constructed modular building unit. The PCM imposed modular building shows the reduced temperature fluctuations in room, the PCM absorbs and liberates excess heat which is gained from the outer side of the room and maintains constant inner room temperature. The PCM imposed walls of modular building unit have an ability to reduce 10–30% of heat load in comparison with the plain wall. The results showed that reduction in room temperature is about 2–4°C and it has been concluded that the PCM imposed modular building unit has more energy saving opportunities than normal modular building unit.     

严寒地区单体建筑太阳能-相变墙系统蓄热特性研究

利用太阳能对水加热并通入相变墙进行蓄热,对减少严寒地区单体建筑供热能耗有重要意义。以大庆市某单体建筑为例,结合该地区太阳能分布特点及建筑热负荷大小,对适用于该地区的太阳能-相变墙系统进行集热与储热能力计算,并采用CFD方法研究单一工况下该系统的热工变化规律及不同热水参数、换热管规格对相变墙蓄热特性的影响。结果表明：该相变墙热稳定性良好,但受自然对流影响,底部相变材料熔化较慢;管径DN25、入口流速0.3m/s、供水温度310.15K、回水温度309.15K、管间距107mm可使相变材料在4小时内完成蓄热,平均节能率为31.8%。研究结果可望为降低严寒地区建筑供热能耗提供新思路。     

Form-stable phase change materials for thermal energy storage

The present paper considers the state of investigations and developments in form-stable phase change materials for thermal energy storage. Paraffins, fatty acids and their blends, polyethylene glycol are widely used as latent heat storage component in developing form-stable materials while high-density polyethylene (HDPE), styrene-butadiene-styrene (SBS) triblock copolymer, Eudragit S, Eudragit E, poly (vynil chloride) (PVC), poly (vynil alcohol) (PVA) and polyurethane block copolymer serve as structure supporting component. A set of organic and metallo-organic materials with high transition heat in solid-solid state is considered as perspective for-stable materials to store thermal energy. Another perspective class of form-stable materials are the materials on the basis of such porous materials as expanded perlite and vermiculite impregnated with phase change heat storage materials. The technology of producing new form-stable ultrafine heat storage fibers is developed. It opens availability to produce the clothers with improved heat storage ability for extremely cold regions. The perspective fields of application of form-stable materials are discussed. The further directions of investigations and developments are considered.     

Thermal performance of phase change material energy storage floor for active solar water-heating system

The conventional active solar water-heating floor system contains a big water tank to store energy in the day time for heating at night, which takes much building space and is very heavy. In order to reduce the water tank volume or even cancel the tank, a novel structure of an integrated water pipe floor heating system using shape-stabilized phase change materials (SSPCM) for thermal energy storage was developed and experimentally studied in this paper. The thermal performances of the floors with and without the SSPCM were compared under the intermittent heating condition. The results show that the Energy Storage Ratio (ESR) of the SSPCM floor is much higher than that of the non-SSPCM floor; the SSPCM floor heating system can provide stable heat flux and prevent a large attenuation of the floor surface temperature. Also, the SSPCM floor heating system dampens the indoor temperature swing by about 50% and increases the minimum indoor air temperature by 2°C–3°C under experimental conditions. The SSPCM floor heating system has a potential of making use of the daytime solar energy for heating at night efficiently.     

应用于日光温室墙体的相变材料热物性优化研究

建立日光温室计算传热模型,以室内空气温度和墙体内表面温度为指标,通过实验方法验证了所建立的传热模型准确性,最后分析相变材料相变温度、相变焓、导热系数、密度等热物性对室内最低温度和相变蓄热率的影响规律,确定被动式相变蓄热墙体和主-被动式相变蓄热墙体的最佳相变材料热物性,阐明了实际应用时相变材料选择原则。研究结果表明,所建立的日光温室传热模型具有较高准确性,可用于日光温室墙体相变材料热物性优化;主-被动式相变蓄热墙体最佳相变材料的相变温度为27 ℃,相变焓为200 kJ/kg,导热系数为0.35 W/（m·K）,密度为440 kg/m³,被动式相变蓄热墙体最佳相变材料的相变温度为26 ℃,相变焓为200 kJ/kg,导热系数为0.35 W/（m·K）,密度为792 kg/m³;最佳相变材料热物性应用时,2种墙体室内最低温度均可达到15.0 ℃,但是被动式相变蓄热墙体的相变蓄热率较主-被动式相变蓄热墙体减小29.5%。本研究可为相变材料在日光温室的高效利用提供参考。     

用于墙体中的固-固相变材料储热性能的研究

使用固一固相变材料作为墙体中的储能材料不会发生渗漏．能增加墙体的蓄热能力，减小室内温度波动，减少建筑能耗。通过实验研究了多元醇类相变材料组成的二元体系在不同组成下的储热性能，从材料的相变温度和相变潜热分析其应用于墙体中的可行性。研究结果表明：在一定的组成下，多元醇二元体系可达到墙体储能要求的相变温度，且相变潜热较大，是理想的墙体相变储能材料。     

Development and research status on the technology of direct contact thermal energy storage

直接接触式蓄热技术利用换热工质与蓄热材料接触并形成对流换热的特点,强化了蓄热器内的换热效果,提高了蓄放热速率,在国内外受到了广泛关注。本文针对直接接触式蓄热技术,从蓄热材料、蓄热器和应用案例三个方面对该技术的发展和研究现状进行了总结,将直接接触式蓄热技术常见材料分为了有机类材料和无机类材料,并对材料的热物性参数和性能进行了比较,讨论了过冷、相分离、导热系数较低和热稳定性等影响材料性能的关键指标。在蓄热器方面,总结了直接接触式蓄热器内材料熔化和流动规律、归纳了直接接触式蓄热器传热和优化方法,针对目前解决直接接触式蓄热器材料沉积问题的措施进行了分析,并给出了建议措施。最后,结合示范工程或商业案例对直接接触式蓄热技术的应用情况进行了回顾,旨在总结应用经验,为该技术的进一步推广提供依据和支持。     

Review of thermal energy storage for air conditioning systems

Thermal energy storage is very important to eradicate the discrepancy between energy supply and energy demand and to improve the energy efficiency of solar energy systems. Latent heat thermal energy storage (LHTES) is more useful than sensible energy storage due to the high storage capacity per unit volume/mass at nearly constant temperatures. This review presents the previous works on thermal energy storage used for air conditioning systems and the application of phase change materials (PCMs) in different parts of the air conditioning networks, air distribution network, chilled water network, microencapsulated slurries, thermal power and heat rejection of the absorption cooling. Recently, researchers studied the heat transfer enhancement of the thermal energy storage with PCMs because most phase change materials have low thermal conductivity, which causes a long time for charging and discharging process. It is expected that the design of latent heat thermal energy storage will reduce the cost and the volume of air conditioning systems and networks.     

Thermal energy storage in building integrated thermal systems: A review. Part 2. Integration as passive system

Energy consumption trends in residential and commercial buildings show a significant increase in recent decades. One of the key points for reducing energy consumption in buildings is to decrease the energy demand. Buildings envelopes are not just a structure they also provide protection from outdoor weather conditions always taking into account the local climate. Thermal energy storage has been used and applied to the building structure by taking advantage of sensible heat storage of materials with high thermal mass. But in recent years, researchers have focused their studies on the implementation of latent heat storage materials that if well incorporated could have high potential in energy demand reduction without occupying the space required by sensible storage. The aim of this study is to review the thermal energy storage passive systems that have been integrated in building components such as walls, ceilings or floors, and to classify them depending on their component integration.     

New challenge in advanced thermal energy transportation using functionally thermal fluids

The present review article presents the current status of some researches on thermal energy transportation using functionally thermal fluid, which is a mixture of heat transfer medium like water and other material with or without phase change like a paraffin wax as a latent heat storage material. This functionally thermal fluid offers attractive opportunities for thermal energy transportation and heat transfer enhancement of heat exchanger. This article describes classification and characteristics of functionally thermal fluids and their application. Referring to functionally thermal fluid for the usage of sensible heat, some visco-elastic fluids for flow drag reduction in a thermal energy transport system such as aqueous polymer solution and surfactant solution are mentioned. On the other hand, this article describes heat transfer and hydrodynamic characteristics of some phase change slurries like ice slurry, phase change microemulsion slurry, phase change microencapsule slurry, clathrate slurry and shape-stabilized paraffin and polyethylene pellets as functionally thermal fluids using latent heat between solid and liquid phases. Finally, it leads to the conclusion that some functionally thermal fluids are very useful for the advanced thermal energy transportation and heat exchanger systems.     

Heat transfer behaviour of thermal energy storage components using composite phase change materials

对基于复合相变材料储热单元的储热性能进行了研究。建立了复合材料和储热单元体内部的二维传热模型,考察了复合材料物性和结构尺寸及传热流体操作条件（流体流速）对单元体储热性能的影响,对比了两种不同结构单元体的储热性能,并搭建实验平台进行了实验对比研究。对比结果表明,模型结果与实验结果趋于一致,验证了模型的准确性。复合材料物性和结构尺寸及传热流体操作条件对单元体储热性能有较大的影响。相比较单管储热单元体,同心管储热单元体有着更优的储热特性,在相同的操作条件下,同心管储热单元体的储热、放热时间较单管储热单元体分别减少10%和15%。     

Analytical optimization of interior PCM for energy storage in a lightweight passive solar room

Lightweight envelopes are widely used in modern buildings but they lack sufficient thermal capacity for passive solar utilization. An attractive solution to increase the building thermal capacity is to incorporate phase change material (PCM) into the building envelope. In this paper, a simplified theoretical model is established to optimize an interior PCM for energy storage in a lightweight passive solar room. Analytical equations are presented to calculate the optimal phase change temperature and the total amount of latent heat capacity and to estimate the benefit of the interior PCM for energy storage. Further, as an example, the analytical optimization is applied to the interior PCM panels in a direct-gain room with realistic outdoor climatic conditions of Beijing. The analytical results agree well with the numerical results. The analytical results show that: (1) the optimal phase change temperature depends on the average indoor air temperature and the radiation absorbed by the PCM panels; (2) the interior PCM has little effect on average indoor air temperature; and (3) the amplitude of the indoor air temperature fluctuation depends on the product of surface heat transfer coefficient h_in and area A of the PCM panels in a lightweight passive solar room.     

Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems

Designing a cost-effective phase change thermal storage system involves two challenging aspects: one is to select a suitable storage material and the other is to increase the heat transfer between the storage material and the heat transfer fluid as the performance of the system is limited by the poor thermal conductivity of the latent heat storage material. When used for storing energy in concentrated solar thermal power plants, the solar field operation temperature will determine the PCM melting temperature selection. This paper reviews concentrated solar thermal power plants that are currently operating and under construction. It also reviews phase change materials with melting temperatures above 300 °C, which potentially can be used as energy storage media in these plants. In addition, various techniques employed to enhance the thermal performance of high temperature phase change thermal storage systems have been reviewed and discussed. This review aims to provide the necessary information for further research in the development of cost-effective high temperature phase change thermal storage systems.     

复合相变蓄能材料的制备及性能研究

综述了相变蓄能材料的研究进展,介绍了相变蓄能材料的种类和特点。阐述了溶胶一凝胶法的基本原理和特性,并用这一方法制备了两种有机-无机复合相变蓄能材料。对实验制备的新材料进行了差示扫描量热分析（DSC）、扫描电镜分析（SEM）,分析结果表明：经过有机-无机复合的相变蓄能材料具有较高的蓄热能力。两种新材料的相变热分别达到147.577 J/g和253.407 J/g,同时,该材料具有较好的热稳定性,是令人满意的复合相变材料,可广泛应用于太阳能利用、工业废热、余热回收系统。     

强化太阳能相变蓄热技术的研究进展

为解决太阳能的间歇性问题,常将其与相变蓄热技术进行结合。与传统显热蓄热相比,相变蓄热可将蓄热能量提高数倍以上,具有巨大的研究和应用价值。本文总结分析了相变蓄热的传热机制及在强化太阳能相变蓄热技术上的研究手段,如变换蓄热结构、添加肋片、使用相变胶囊、充注多相变材料、蓄热材料中添加高导热物质等。分析结果显示,相变传热机制中,融化过程主要考虑对流换热,凝固过程热传导占主导;使用肋片、相变胶囊等,主要增大相变材料接触面与蓄热体的比值,进而改善传热;蓄热材料添加高导热物质,可以改善相变材料的团聚、结核及使用寿命,从而提高导热性能,其中添加泡沫金属效果最为显著。     

节能建筑用蓄热材料的释热性能实验研究

相变材料在发生相变的过程中吸收或者释放热量，在太阳能利用、建筑节能和空调采暖方面有着广阔的应用前景。通过实验研究了可用于节能建筑的相变材料——硫酸钠水合盐体系相变材料的释热性能，研究了不同增稠剂和成核剂对其放热性能的影响，对节能建筑用相变建材的研究有参考价值。