Dendritic chelating agents. 1. Cu(II) binding to ethylene diamine core poly(amidoamine) dendrimers in aqueous solutions

This paper describes an investigation of the uptake of Cu(II) by poly(amidoamine) (PAMAM) dendrimers with an ethylenediamine (EDA) core in aqueous solutions. We use bench scale measurements of proton and metal ion binding to assess the effects of (i) metal ion-dendrimer loading, (ii) dendrimer generation/terminal group chemistry, and (iii) solution pH on the extent of binding of Cu(II) in aqueous solutions of EDA core PAMAM dendrimers with primary amine, succinamic acid, glycidol, and acetamide terminal groups. We employ extended X-ray absorption fine structure (EXAFS) spectroscopy to probe the structures of Cu(II) complexes with Gx-NH2 EDA core PAMAM dendrimers in aqueous solutions at pH 7.0. The overall results of the proton and metal ion binding measurements suggest that the uptake of Cu(II) by EDA core PAMAM dendrimers involves both the dendrimer tertiary amine and terminal groups. However, the extents of protonation of these groups control the ability of the dendrimers to bind Cu(II). Analysis of the EXAFS spectra suggests that Cu(II) forms octahedral complexes involving the tertiary amine groups of Gx-NH2 EDA core PAMAM dendrimers at pH 7.0. The central Cu(II) metal ion of each of these complexes appears to be coordinated to 2-4 dendrimer tertiary amine groups located in the equatorial plane and 2 axial water molecules. Finally, we combine the results of our experiments with literature data to formulate and evaluate a phenomenological model of Cu(II) uptake by Gx-NH2 PAMAM dendrimers in aqueous solutions. At low metal ion-dendrimer loadings, the model provides a good fit of the measured extent of binding of Cu(II) in aqueous solutions of G4-NH2 and G5-NH2 PAMAM dendrimers at pH 7.0.     

Physicochemical properties of quaternized poly(amidoamine) dendrimers with alkyl groups and of their mixtures with sodium dodecyl sulfate

The physicochemical properties of quaternized poly(amidoamine) dendrimers (generation 4) with methyl or octyl groups and of their mixtures with sodium dodecyl sulfate (SDS) in aqueous solutions have been investigated using several techniques including surface tension, fluorescence of pyrene, and dynamic light scattering. In the single systems of the dendrimers, the dendrimer with octyl groups shows lower surface tension and lower micropolarity than the dendrimer with methyl groups. The hydrodynamic radii of two quaternized poly(amidoamine) dendrimers are considerably large, indicating the formation of aggregates. In the mixed systems of quaternized poly(amidoamine) dendrimers and SDS, the dendrimer with octyl groups-SDS mixed system shows very low surface tension and low micropolarity even in the presence of extremely low SDS concentration compared to those of the dendrimer with methyl groups-SDS mixed system. Maximum turbidity for both systems is observed at around the mixed molar ratio of dendrimer:SDS=1:1.5 where distinct changes have also been confirmed by surface tension, fluorescence of pyrene, and electrical conductivity measurements.     

CE of poly(amidoamine) succinamic acid dendrimers using a poly(vinyl alcohol)-coated capillary

Various generations (G1-G8) of negatively charged poly(amidoamine) (PAMAM) succinamic acid dendrimers (PAMAM-SAH) were analyzed by CE using a poly(vinyl alcohol)-coated capillary. Due to its excellent stability and osmotic flow-shielding effect, highly reproducible migration times were achieved for all generations of dendrimer (e.g., RSD for the migration times of G5 dendrimer was 0.6%). We also observed a reverse trend in migration times for the PAMAM-SAH dendrimers (i.e., higher generations migrated faster than lower generation dendrimers) compared to amine-terminated PAMAM dendrimers reported in the literature. This reversal in migration times was attributed to the difference in counterion binding around these negatively charged dendrimers. This reverse trend allowed a generational separation for lower generation (G1-G3) dendrimers. However, a sufficient resolution for the migration peaks of higher generations (G4-G5) in a mixture could not be achieved. This could be due to their nearly identical charge/mass ratio and dense molecular conformations. In addition, we show that dye-functionalized PAMAM-SAH dendrimers can also be analyzed with high reproducibility using this method.     

Interaction forces between poly(amidoamine) (PAMAM) dendrimers adsorbed on gold surfaces

Interaction forces between two gold surfaces with adsorbed poly(amidoamine) (PAMAM) dendrimers (generations G3.0 and G5.0) have been investigated using colloidal probe atomic force microscopy (AFM). In the absence of dendrimers or at their low concentrations, an attractive force derived from the van der Waals interaction was observed. On the other hand, this attractive interaction changed to repulsion with increasing dendrimer concentration. The origin of the repulsion can be attributed to either an electric double layer interaction or a steric effect of the adsorbed dendrimers, depending on the concentration of dendrimer. The steric hindrance was also influenced by the generation of the dendrimer; the force-detectable distance in the presence of PAMAM G5.0 dendrimer was slightly longer than that in the presence of G3.0 dendrimer. In order to estimate the occupied area of each dendrimer adsorbed on gold, quartz crystal microbalance (QCM) measurement was also carried out.     

Direct force measurements between adlayers consisting of poly(amidoamine) dendrimers with primary amino groups or quaternary ammonium groups

Adsorption of poly(amidoamine) generation 3 (PAMAM G3) dendrimer with surface amino groups or PAMAM G0 dendrimer with quaternary ammonium groups (C8qbG0) onto glass has been studied by colloidal probe atomic force microscopy. The adlayer-adlayer interactions for these adsorbates are quite different despite the fact that they are almost equal in the hydrodynamic radius. In aqueous PAMAM G3 dendrimer solutions the electrostatic repulsion is predominant. The conformation of the adsorbed layer is flat and the protrusion of the individual dendrimers is negligible. On the other hand, C8qbG0 behaves as a surfactant and the layered structure of C8qbG0 is expected to be a patchy bilayer. Dispersion stability of silica suspensions with the adsorption of these dendrimers can be correlated with the force data obtained.     

Thermosensitive properties of poly(amidoamine) dendrimers with peripheral phenylalanine residues

Dendrimers are unique polymers with globular shapes and well-defined structures. We previously prepared poly(amidoamine) (PAMAM) dendrimers having phenylalanine (Phe) residues at every chain end of the dendrimer as efficient gene carriers. In this study, we found that Phe-derivatized PAMAM dendrimers change their water solubility depending on temperature. The dendrimers were soluble in aqueous solutions at low temperatures, but they became water-insoluble at temperatures above a specific threshold, which is termed the lower critical solution temperature (LCST). Although the LCST of Phe-modified dendrimers decreased with increasing dendrimer generation, these dendrimers exhibited an LCST of 20-30 degrees C under physiological conditions. In addition, the LCST of the dendrimers was controlled by introducing isoleucine (Ile) residues at chain ends of dendrimers at varying ratios with respect to Phe residues. The PAMAM dendrimers are known to encapsulate various drug molecules. For these reasons, temperature-sensitive dendrimers might be useful as efficient drug carriers with controlled size and temperature-responsive properties.     

The characterization of high generation poly(amidoamine) G9 dendrimers by atomic force microscopy (AFM)

Scanning force microscopy (AFM) has been employed to characterize the generation‐9 (G9) poly(amidoamine) (PAMAM) dendrimer packing on a mica surface under various conditions. Well ordered 2‐D arrays from hexagonally packed particles of PAMAM (G9) dendrimers (11.4nm in diameter) were deposited on the mica surface. This may be one of the smallest regular monolayer arrays ever observed. The mechanism considered to be responsible for this 2‐D array packing is the interaction of forces between the dendrimer and the mica surface and between dendrimer molecules as well. Other factors such as molecular interpenetrating and the rigidity of the branch structure obviously play an important role in the 2‐D array formation.     

Study on interaction between poly(amidoamine) dendrimer and CdSe nanocrystal in chloroform

The binding of different categories of molecules to quantum dot has been studied for many years through different spectroscopic techniques to elucidate details of binding mechanism. In this work we present the results of the study of the interactions between CdSe and poly(amidoamine) dendrimer monitored by photoluminescence spectroscopy of CdSe in chloroform. Dendrimers with different terminal groups and different generations were used to bind with CdSe nanocrystal of different size. Significant differences in the values of binding constant Kb(n) and K(SV) were found in these experiments. The binding constant for poly(amidoamine) dendrimer of generation 4.0 is higher as compared to generation 3.5. The interaction of CdSe with poly(amidoamine) dendrimer shows an increase of binding constants with increasing dendrimer generation from 2.0 to 4.0, as well as with decreasing CdSe diameter. From HRTEM and FTIR analysis, we suggest that dendrimer/CdSe interactions are primarily hydrogen-bonding.     

Synthesis, characterization, and surface immobilization of platinum and palladium nanoparticles encapsulated within amine-terminated poly(amidoamine) dendrimers

Platinum and palladium dendrimer-encapsulated nanoparticles (DENs) were prepared within commercially available, fourth-generation, amine-terminated, poly(amidoamine) dendrimers (G4-NH2). The synthesis is carried out by selectively encapsulating metal complexes within the dendrimer and then reducing the resulting composite. Intradendrimer complexation requires control over the solution pH to prevent attachment of the metal complexes to primary amine groups on the dendrimer periphery. That is, the surface primary amines of the dendrimer must be selectively protonated in the presence of the interior tertiary amines. The metal-ion encapsulation and reduction processes were characterized by UV-vis spectroscopy. Forty-atom Pt and Pd DENs were examined by high-resolution transmission electron microscopy, which showed that the mean particle sizes were 1.4 and 1.5 nm, respectively, and that both were nearly monodisperse (standard deviation = 0.3 nm). The free amine groups on the dendrimer surface were used to link Pd DENs to monolithic Au surfaces via an intermediate self-assembled monolayer adhesion layer.     

Electrochemistry of non-redox-active poly(propylenimine) and poly(amidoamine) dendrimers at liquid-liquid interfaces

The electrochemistry of a series of dendrimers was examined at the interface between two immiscible electrolyte solutions (ITIES), enabling study of non-redox-active dendrimers. Different generations of poly(propylenimine) (DAB-AM-n) and poly(amidoamine) (PAMAM) dendrimers were studied. In their protonated states, the dendrimers were transferred across the ITIES, with the electrochemical behavior observed depending on the dendrimer family, the generation number, and the experimental pH. The electrochemistry of the lower generations studied was characterized by well-defined peaks for both dendrimer families and with small peak-peak separations in the case of the PAMAM family. The voltammetry of the higher generations was more complex, showing distorted voltammograms and instability of the interface. The charges of the transferring dendrimers were calculated by convolution of the voltammetric data and were similar to the theoretical charges for DAB-AM-n. For PAMAM, only the lowest generation exhibited reversible behavior, with higher generations having irreversible behavior. Using cyclic voltammetry, low micromolar concentrations of the dendrimers were detected. The results show that electrochemistry at the ITIES can be a useful method for characterization of ionizable dendrimers and that voltammetry can be a simple method for detection of low concentrations of these multicharged species.     

Electrophoretic mobility and molecular distribution studies of poly(amidoamine) dendrimers of defined charges

Generation 5 ethylenediamine (EDA)-cored poly(amidoamine) (PAMAM) dendrimers (E5, E denotes the EDA core and 5 the generation number) with different degrees of acetylation and carboxylation were synthesized and used as a model system to investigate the effect of charge and the influence of dendrimer surface modifications on electrophoretic mobility (EM) and molecular distribution. The surface-modified dendrimers were characterized by size-exclusion chromatography, 1H NMR, MALDI-TOF-MS, PAGE, and CE. The focus of our study was to determine how EM changes as a function of particle charge and molecular mass, and how the molecular distribution changes due to surface modifications. We demonstrate that partially modified dendrimers have much broader migration peaks than those of fully surface functionalized or unmodified E5 dendrimers due to variations in the substitution of individual dendrimer surfaces. EM decreased nonlinearly with increases in surface acetylation for both PAMAM acetamides and PAMAM succinamic acids, indicating a complex migration activity in CE separations that is not solely due to charge/mass ratio changes. These studies provide new insights into dendrimer properties under an electric field, as well as into the characterization of dendrimer-based materials being developed for medical applications.     

Preparation, characterization, and antimicrobial property of cotton cellulose fabric grafted with poly (propylene imine) dendrimer

Two generations of poly (propylene imine) dendrimer with amino terminated groups (G2- and G5-PPI-NH₂) were grafted on cotton cellulose fabric using cross linking agents (citric or glutaric acids). Fourier transform infrared (FTIR) spectroscopy identified ester groups which were formed between hydroxyl groups of the cotton fabric and carboxylic groups of the cross linking agents. Also, attenuated total reflectance-FTIR (ATR-FTIR) analysis confirmed formation of amide groups between the carboxylic groups of the cross linking agents and the amino end groups of the dendrimers. Nitrogen content (N-content) analysis revealed the presence of the dendrimers on the cotton fabric even after 5 washing cycles. In order to study the dispersion of the PPI dendrimers on the surface of the cotton fabric, field emission scanning electron microscopy (FE-SEM) was performed. The particle size distribution of the G2- and G5-PPI-NH₂ aqueous solutions was also determined by dynamic light scattering (DLS) analysis. Antimicrobial activity of the PPI dendrimer aqueous solutions and the cotton cellulose fabric grafted with the dendrimers was evaluated both quantitatively and qualitatively against Gram-positive bacterium (Staphylococcus aureus), Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli) and fungus (Candida albicans). The dendrimer grafted cotton cellulose fabric exhibited a 99 % reduction in bacterial counts against S. aureus, E. coli and C. albicans. The antimicrobial activities of the grafted cotton cellulose fabric with the PPI dendrimers were maintained even after 5 washing cycles.     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Synthesis, characterization, and intracellular uptake of carboxyl-terminated poly(amidoamine) dendrimer-stabilized iron oxide nanoparticles

We report the synthesis and characterization of a group of carboxyl-functionalized poly(amidoamine) (PAMAM) dendrimers of generation 3 (G3) that were used for the stabilization of superparamagnetic iron oxide (Fe(3)O(4)) nanoparticles (NPs). Folic acid (FA) molecules were conjugated onto the dendrimer surfaces in an attempt to achieve specific targeted imaging of tumor cells that overexpress FA receptors using dendrimer-stabilized Fe(3)O(4) NPs. Fe(3)O(4) NPs were synthesized using controlled co-precipitation of Fe(ii) and Fe(iii) ions and the formed dendrimer-stabilized Fe(3)O(4) NPs were characterized using transmission electron microscopy (TEM) and polyacrylamide gel electrophoresis (PAGE). The intracellular uptake of dendrimer-stabilized Fe(3)O(4) NPs was tested in vitro using KB cells (a human epithelial carcinoma cell line) that overexpress FA receptors. It appears that carboxyl-terminated PAMAM dendrimer-stabilized Fe(3)O(4) NPs can be uptaken by KB cells regardless of the repelling force between the negatively charged cells and the negatively charged particles. In the presence of a large amount of carboxyl terminal groups on the dendrimer surface, the receptor-mediated endocytosis of Fe(3)O(4) NPs stabilized by FA-modified dendrimers was not facilitated. It implies that the surface charge of dendrimer-stabilized magnetic iron oxide NPs in biological medium is an important factor influencing their biological performance.     

聚酰胺-胺型树枝状化合物与细胞色素C的结合作用

制备具有分子识别功能的材料 ,特别是设计合成某种分子 ,使其能够识别蛋白质表面 ,并干扰或促进蛋白质的特定生理功能 ,是生物有机化学中一个尚待解决的重要问题 ,也是揭开蛋白质分子识别与相互作用机理的重要问题 .人们对生物大分子———蛋白质分子之间的识别和相互作用进行了广泛的研究 ,总结出了一些规律 .( 1 )蛋白质复合物中最直接相互作用的残基数目共为 2 7～44个 ,相对与总的残基数来说很少 ,但是对分子间的识别和稳定作用却起决定性作用 ;( 2 )蛋白质复合物的接触面积为 6～ 1 0ｎｍ2 ,既需要比较大的接触面积 ,复合物才比较稳定 …     

"Click" dendrimers: synthesis, redox sensing of Pd(OAc)2, and remarkable catalytic hydrogenation activity of precise Pd nanoparticles stabilized by 1,2,3-triazole-containing dendrimers

"Click" dendrimers containing 1,2,3-triazolyl ligands that coordinate to PdII(OAc)2 have been synthesized in view of catalytic applications. Five of these dendrimers contain ferrocenyl termini directly attached to the triazole ligand in order to monitor the number of PdII that are introduced into the dendrimers by cyclic voltammetry. Reduction of the PdII-triazole dendrimers by using NaBH4 or methanol yields Pd nanoparticles (PdNPs) that are stabilized either by several dendrimers (G0, DSN) or by encapsulation inside a dendrimer (G1 and G2: DEN), as confirmed by TEM. Relative to PAMAM-DENs (PAMAM=poly(amidoamine)), the "click" DSNs and DENs show a remarkable efficiency and stability for olefin hydrogenation under ambient conditions of various substrates. The influence of the reductant of PdII bound to the dendrimers is dramatic, reduction with methanol leading to much higher catalytic activity than reduction with NaBH4. The most active NPs are shown to be those derived from dendrimer G1, and variation of its termini groups (ferrocenyl, alkyl, phenyl) allowed us to clearly delineate, optimize, and rationalize the role of the dendrimer frameworks on the catalytic efficiencies. Finally, hydrogenation of various substrates catalyzed by these PdNPs shows remarkable selectivity features.     

Preparation, characterization, resistance to protein adsorption, and specific avidin-biotin binding of poly(amidoamine) dendrimers functionalized with oligo(ethylene glycol) on gold

Protein-resistant films derived from the fifth-generation poly(amidoamine) dendrimers (PAMAM G5) functionalized with oligo(ethylene glycol) (OEG) derivatives consisting of various ethylene glycol units (EG(n), n = 3, 4, and 6) were prepared on the self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) on gold substrates. The resulting films were characterized by ellipsometry, contact angle goniometry, and X-ray photoelectron spectroscopy (XPS). About 35% of the peripheral amines of the dendrimers were reacted with N-hydroxysuccinimide-terminated EG(n) derivatives (NHS-EG(n)). The dendrimer films showed improved stability over octadecanethiolate SAMs on gold in hot solvents, attributed to the formation of multiple amide bonds per PAMAM unit with underlying NHS-activated MUA monolayer. The EG(n)-attached PAMAM surfaces with n = 3 reduced the adsorption of fibrinogen to approximately 20% monolayer, whereas 2-3% for n = 4 or 6. The dendrimer films with various densities of EG(n) molecules on PAMAM surfaces were prepared by immersion of the NHS-terminated MUA-functionalized gold substrates in ethanolic solutions containing PAMAM and NHS-EG(n) of various mole ratios. The density (r) of the EG(n) molecules on the PAMAM surfaces is consistent with the mole ratio (r') of NHS-EG(n)/free amine of PAMAM in solutions. The resistance to protein adsorption of the resulting surfaces is correlated with the surface density and the length of the EG chains. At their respective r, the EG(n)-modified dendrimer films resisted approximately 95% adsorption of fibrinogen on gold surfaces. Finally, the specific binding of avidin to the approximately 5% and approximately 40% biotinylated EG3 dendrimers (surface density of biotin with respect to the total number of terminal amino groups on PAMAM G5) gave rise to about 50% and 100% surface coverage by avidin, respectively.     

Scavenging DPPH radicals catalyzed by binary noble metal-dendrimer nanocomposites

Catalytic activity of gold-platinum, gold-palladium, and platinum-palladium dendrimer nanocomposites for scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was investigated. The gold-platinum and gold-palladium dendrimer nanocomposites were prepared via simultaneous reduction by sodium borohydride in the presence of poly(amidoamine) (PAMAM) dendrimers with amine or carboxyl terminal groups. The particles were not mixtures of monometallic particles but alloyed bimetallic particles. Bimetallic particles exhibited higher catalytic activity than monometallic ones.     

Comprehensive characterization of surface-functionalized poly(amidoamine) dendrimers with acetamide,hydroxyl, and carboxyl groups

Terminal amine groups of poly(amidoamine) (PAMAM) dendrimers can be substituted with different functional groups for various applications. In this study, PAMAM derivatives with acetamide, hydroxyl, and carboxyl termini were synthesized from ethylenediamine (EDA) core generation 4 and 5 primary amine-terminated PAMAM dendrimers. The reaction products were purified with dialysis and subsequently characterized by polyacrylamide gel electrophoresis (PAGE), capillary electrophoresis (CE), size exclusion chromatography (SEC), matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry, potentiometric titration, ¹H NMR, and ¹³C NMR. PAGE and CE electropherograms provide data regarding the purity, charge distribution, and electrophoretic mobility of the dendrimers and their derivatives. SEC and MALDI-TOF mass spectrometry detect the average absolute molar mass and the individual mass fractions, respectively. The combination of SEC with potentiometric titration provides quantitative evidence of the degree of the functional group substitution, while NMR techniques (both ¹H NMR and ¹³C NMR) confirmed the changes in dendrimer surface functionalization. This study provides a general example for the comprehensive characterization of surface-functionalized PAMAM dendrimer nanoparticles. The synthesized dendrimer derivatives hold promise for environmental and medical applications.     

New Dendrimers: Synthesis and Characterization of Popam - Pamam Hybrid Dendrimers

Recently developed multifunctional cancer therapeutic nano-device production is based on poly(amidoamine) PAMAM generation 5 (G5) dendrimer as a carrier 1-5. Scale up synthesis of this nano-device is limited because of long reaction sequence (12 reaction steps) and long and not easy work up of the products after each reaction step. Combination of poly(propyle-imine) and poly(amidoamine) synthesis can improve the production of the drug carrier.In this paper we give a general overview of the synthesis and characterization of a series of novel hybrid dendrimers which we coined as novel POMAM hybrid dendrimers, constructed from poly(propylene-imine) (PPI or POPAM) core and poly(amidoamine) PAMAM shells. The synthesis was accomplished by a divergent reiterating method involving repeating subsequent Michael addition and amidation reactions. Each generation of the newly synthesized dendrimer was characterized by using HPLC, GPC, NMR and AFM.