Physicochemical properties of quaternized poly(amidoamine) dendrimers with four octyl chains

A cationic dendrimer-type tetrameric surfactant (C(8)qbG0) with four octyl chains and four ammonium groups was synthesized by the reaction of poly(amidoamine) dendrimers with generation of zero and glycidyldimethyloctylammonium bromide. The physicochemical properties of C(8)qbG0 and of their mixtures with sodium dodecyl sulfate (SDS) were characterized by investigating surface tension, electrical conductivity, fluorescence of pyrene, and dynamic light-scattering. The critical micelle concentration (cmc) of C(8)qbG0 was 13 mmol dm(-3) at the concentration of one terminal group and the surface tension at the cmc attained 34 mN m(-1). The occupied area of C(8)qbG0 was 1.94 nm(2) molecule(-1), indicating that the tetrameric dendrimers adsorb widely at the air/water interface. The fluorescence intensity ratio of the first-to-third band in the emission spectra of pyrene for C(8)qbG0 decreased from around the cmc obtained by the surface tension measurement. The hydrodynamic radius of C(8)qbG0 determined by dynamic light-scattering was about 1.3 nm. The addition of SDS to the aqueous solutions of C(8)qbG0 enhanced the surface activities; the mixtures exhibited lower cmc, lower surface tension, and higher solubilization of pyrene than SDS alone. It was found that the mixtures of C(8)qbG0 and SDS form large aggregates due to the interactions between their alkyl chains as well as hydrophilic groups.     

Rendering poly(amidoamine) or poly(propylenimine) dendrimers temperature sensitive

The poly(amidoamine) dendrimers having terminal isobutyramide (IBAM) groups were prepared by the reaction of isobutyric acid and the amine-terminated poly(amidoamine) dendrimers with generations (G) of 2 to 5 by using a condensing agent, 1,3-dicyclohexylcarbodiimide. 1H and 13C NMR revealed that an IBAM group was attached to essentially every chain end of the dendrimers. While the IBAM-terminated G2 dendrimer was soluble in water, the IBAM-terminated G3, G4, and G5 dendrimers exhibited the lower critical solution temperatures (LCSTs) at 75, 61, and 43 degrees C, respectively. Because the density of the terminal IBAM groups in the periphery of the dendrimer progressively increases with increasing dendrimer generation, the interaction of the IBAM groups might take place more efficiently, resulting in a remarkable decrease in the LCST. In addition, attachment of IBAM groups to poly(propylenimine) dendrimers could give the temperature-sensitive property, indicating that this is an efficient method to render dendrimers temperature sensitive.     

Effects of various thiol molecules added on morphology of dendrimer-gold nanocomposites

Interactions between poly(amidoamine) dendrimer (PAMAM)-gold nanocomposites and alkanethiols and between the former nanocomposites and thiol-modified poly(amidoamine) dendrons in ethyl acetate were investigated by adding alkanethiols, such as 1-propanethiol and 1,3-propanedithiol, and thiol-modified poly(amidoamine) dendrons, generations 0.5 and 2.5 (G0.5-SH and G2.5-SH). The PAMAM dendrimers with surface methyl ester groups used were generations 1.5 and 5.5 (G1.5 and G5.5). The mean particle sizes of PAMAM-gold nanocomposites were about 2.1 for G1.5 and 2.4 nm for G5.5. In both nanocomposite systems where 1-propanethiol and 1,3-propanedithiol were added, the mean particle size was about 4 nm, twice that of the systems where these thiols were not added. Increasing the addition of 1,3-propanedithiol made the average particle size smaller for both nanocomposites systems. To compare with alkanethiol, thiol-modified poly(amidoamine) dendron with a highly branched structure on one side was synthesized. Using G2.5-SH as a protective agent, dendron-gold nanocomposites with mean diameters of 3 to 4 nm were obtained. The difference in particle size was seen only when the combination of PAMAM-gold nanocomposites and thiol-modified dendron was less sterically dense, modified dendron (G0.5-SH). The mechanisms for morphology changes in the dendrimer-gold nanocomposites by the addition of these thiols are discussed.     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Direct force measurements between adlayers consisting of poly(amidoamine) dendrimers with primary amino groups or quaternary ammonium groups

Adsorption of poly(amidoamine) generation 3 (PAMAM G3) dendrimer with surface amino groups or PAMAM G0 dendrimer with quaternary ammonium groups (C8qbG0) onto glass has been studied by colloidal probe atomic force microscopy. The adlayer-adlayer interactions for these adsorbates are quite different despite the fact that they are almost equal in the hydrodynamic radius. In aqueous PAMAM G3 dendrimer solutions the electrostatic repulsion is predominant. The conformation of the adsorbed layer is flat and the protrusion of the individual dendrimers is negligible. On the other hand, C8qbG0 behaves as a surfactant and the layered structure of C8qbG0 is expected to be a patchy bilayer. Dispersion stability of silica suspensions with the adsorption of these dendrimers can be correlated with the force data obtained.     

Size-selective catalytic activity of Pd nanoparticles encapsulated within end-group functionalized dendrimers

The synthesis and size-selective catalytic activity of Pd nanoparticles encapsulated within dendrimers functionalized with different-sized end groups is described. We designed and synthesized a series of fourth-generation poly(amidoamine) dendrimers having various extents of steric crowding on their periphery. This was accomplished by reacting the terminal amine groups of these dendrimers with epoxyalkanes substituted with different-sized alkyl groups. The modified dendrimers were characterized by 1H NMR, 13C NMR, and matrix-assisted laser desorption ionization mass spectrometry. Nearly monodisperse (1.7 +/- 0.2 nm) Pd nanoparticles were encapsulated within the interior of these dendrimers, and the resulting composite catalysts were used for the hydrogenation of three alpha-allylic alcohols having different sizes. The results showed a clear correlation between the extent of steric crowding on the dendrimer surface and the turnover frequencies (TOFs) for the substrates: more steric crowding on the dendrimer surface led to lower TOFs.     

Preparation of PAMAM- and PPI-metal (silver, platinum, and palladium) nanocomposites and their catalytic activities for reduction of 4-nitrophenol

Dendrimer-metal (silver, platinum, and palladium) nanocomposites are prepared in aqueous solutions containing poly(amidoamine) (PAMAM) dendrimers with surface amino groups (generations 3, 4, and 5) or poly(propyleneimine) (PPI) dendrimers with surface amino groups (generations 2, 3, and 4). The particle sizes of the metal nanoparticles obtained are almost independent of the generation as well as the concentration of the dendrimer for both the PAMAM and the PPI dendrimers; the average sizes of silver, platinum, and palladium nanoparticles are 5.6-7.5, 1.2-1.6, and 1.6-2.0 nm, respectively. It is suggested that the dendrimer-metal nanocomposites are formed by adsorbing the dendrimers on the metal nanoparticles. Studies of the reduction reaction of 4-nitrophenol by these nanocomposites show that the rate constants are very similar between PAMAM and PPI dendrimer-silver nanocomposites, whereas the rate constants for the PPI dendrimer-platinum and -palladium nanocomposites are greater than those for the corresponding PAMAM dendrimer nanocomposites. In addition, it is found that the rate constants for the reduction of 4-nitrophenol involving all the dendrimer-metal nanocomposites decrease with an increase in the dendrimer concentrations, and the catalytic activity of dendrimer-palladium nanocomposites is highest.     

A SAXS study of the internal structure of dendritic polymer systems

Small-angle x-ray scattering was used to characterize the single-particle scattering factors produced by poly(amidoamine) dendrimers, poly(propleneimine) dendrimers, and polyol hyperbranched polymers in dilute solutions with methanol as solvent. Fits from electron density modeling reveal similar overall densities of the dendrimers as a function of dendrimer generation. The seventh through tenth generation poly(amidoamine) dendrimers exhibit higher order scattering features that require nearly monodisperse, spherical particles with essentially uniform internal segment densities. Dilute hyperbranched polymer solutions exhibit scattering more indicative of the inherent irregularity of internal segment densities and overall sizes to be expected within these systems. Radii of gyration estimated from electron density modeling agree reasonably well with those estimated by standard Guinier methods used in previous studies. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 2913–2924, 1997     

载入树状分子内部的纳米金修饰玻碳电极的制备及其对亚硝酸根的电化学测定

建立了一种简单、可靠的基于载入树状分子内部的纳米金修饰电极用于亚硝酸根测定的电化学分析方法.将壳聚糖(Chit)修饰在玻碳电极表面,在偶联活化剂碳二亚胺存在的条件下,4.5代羧基末端的树状分子(Dendrimer)通过其外围的羧基与壳聚糖的氨基形成酰胺键而连接在电极表面.Au(Ⅲ)通过与树状分子内部氮的配位作用被结合在...     

Thermosensitive properties of poly(amidoamine) dendrimers with peripheral phenylalanine residues

Dendrimers are unique polymers with globular shapes and well-defined structures. We previously prepared poly(amidoamine) (PAMAM) dendrimers having phenylalanine (Phe) residues at every chain end of the dendrimer as efficient gene carriers. In this study, we found that Phe-derivatized PAMAM dendrimers change their water solubility depending on temperature. The dendrimers were soluble in aqueous solutions at low temperatures, but they became water-insoluble at temperatures above a specific threshold, which is termed the lower critical solution temperature (LCST). Although the LCST of Phe-modified dendrimers decreased with increasing dendrimer generation, these dendrimers exhibited an LCST of 20-30 degrees C under physiological conditions. In addition, the LCST of the dendrimers was controlled by introducing isoleucine (Ile) residues at chain ends of dendrimers at varying ratios with respect to Phe residues. The PAMAM dendrimers are known to encapsulate various drug molecules. For these reasons, temperature-sensitive dendrimers might be useful as efficient drug carriers with controlled size and temperature-responsive properties.     

Interfacial regions governing internal cavities of dendrimers. Studies of poly(alkyl aryl ether) dendrimers constituted with linkers of varying alkyl chain length

This report deals with a study of the properties of internal cavities of dendritic macromolecules that are capable of encapsulating and mediating photoreactions of guest molecules. The internal cavity structures of dendrimers are determined by the interfacial regions between the aqueous exterior and hydrocarbon like interior constituted by the linkers that connect symmetrically sited branch points constituting the dendrimer and head groups that cap the dendrimers. Phloroglucinol-based poly(alkyl aryl ether) dendrimers constituted with a homologous series of alkyl linkers were undertaken for the current study. Twelve dendrimers within first, second, and third generations, having ethyl, n-propyl, n-butyl, and n-pentyl groups as the linkers and hydroxyl groups at peripheries in each generation, were synthesized. Encapsulation of pyrene and coumarins by aqueous basic solutions of dendrimers were monitored by UV-vis and fluorescence spectroscopies, which showed that a lower generation dendrimer with an optimal alkyl linker presented better encapsulation abilities than a higher generation dendrimer. Norrish type I photoreaction of dibenzyl ketone was carried out within the above series of dendrimers to probe their abilities to hold guests and reactive intermediate radical pairs within themselves. The extent of cage effect from the series of third generation dendrimers was observed to be higher with dendrimers having an n-pentyl group as the linker.     

Interactions in noncovalent PAMAM/TMPyP systems studied by fluorescence spectroscopy

Steady-state absorption and emission spectroscopy and time-resolved fluorescence measurements were employed in the study of meso-tetrakis(4-N-methylpyridinium)porphine (TMPyP) interactions with half-generation carboxyl-terminated poly(amidoamine) (PAMAM) dendrimers in water. TMPyP experiences a less polar environment and a strong fluorescence quenching effect upon dendrimer association. The tertiary amine functional groups in PAMAM dendrimers are likely to be responsible for the fluorescence quenching of TMPyP through an electron-transfer mechanism. The Stern-Volmer plots achieve a plateau at high dendrimer concentrations that was attributed to full porphyrin-dendrimer association, and an average fluorescence quantum yield of 15-20% relative to aqueous TMPyP was estimated. The association constant for the 1:1 complex with generation 2.5 at dendrimer-porphyrin ratio D/P = 1 is 5.75 x 10(7) M(-1), indicating a strong binding affinity. The dissociation of the complex with increasing ionic strength reinforces the role of electrostatic forces in porphyrin-dendrimer association. Comparison of Stern-Volmer plots obtained from quantum yields or lifetimes showed the importance of a static effect in these systems. The fluorescence decays of the porphyrin-dendrimer complex were fitted with a dispersed kinetics model. At intermediate dendrimer-porphyrin ratios (D/P approximately 1), diffusional quenching processes between free porphyrin and dendrimer were modeled with the Sano-Tachiya pair survival probability equation. Transient diffusional effects were dismissed as a possible explanation for the static effect detected.     

Platinum ion uptake by dendrimers: an NMR and AFM study

The reaction of generation 2 and generation 4 poly(amidoamine) (PAMAM) dendrimers with K2PtCl2 was studied by several NMR methods. The time dependency of the Pt(II) complexation was followed with 195Pt NMR for both dendrimers and the equilibrium product was further characterized with (1)H NMR, and indirectly detected 13C NMR, in the case of the generation 2 dendrimer. After 2 days, a black precipitate of Pt(0) was observed, half the original 195Pt signal was lost, and approximately 20% of the initial Pt(II) was coordinated to the tertiary and secondary nitrogens of the generation 2 dendrimer. The uptake of Pt(II) by the generation 4 dendrimer was much slower, consistent with the steric crowding of the surface groups on the generation 4 dendrimer compared to the more open generation 2. After 10 days, 80% of the Pt(II) was deep within the generation 4 dendrimer; the remaining 20% was unreacted or bound near the surface nitrogens of a single dendrimer. The location and time course of the platinum ion uptake by the dendrimers provides valuable insight into the formation of Pt(0) nanoparticles made in the presence of dendrimers as stabilizers, visualized by atomic force microscopy.     

Spectrochemical investigations in molecularly organized solvent media: evaluation of pyridinium chloride as a selective fluorescence quenching agent of polycyclic aromatic hydrocarbons in aqueous carboxylate-terminated poly(amido) amine dendrimers and anionic micelles

The ability of pyridinium chloride (PC) to selectively quench alternant as opposed to nonaltemant polycyclic aromatic hydrocarbons (PAHs) in organized media is examined. PC was previously shown to be a selective quenching agent of alternant PAHs in neat polar solvents. Carboxylate-terminated poly(amido) amine (PAMAM-CT) dendrimers and anionic surfactants--sodium dodecanoate (SD), sodium octanoate (SO), and sodium dodecylsulfate (SDS)--were chosen as the solubilizing media for this study. Selective quenching of alternant PAHs is observed in the presence of the SDS and SO micelles. However, the extent of PAH quenching in SO is significantly reduced compared to PAHs dissolved in either water or SDS micelles. In the case of the smaller generation 4.5 (G4.5) PAMAM-CT dendrimers, PC was prevented from quenching both alternant and nonalternant PAHs to any appreciable extent. The dendrimer is able to "protect" the PAHs from the PC quencher that resides at the dendrimer surface. Both, SD and G5.5 PAMAM-CT precipitated out of solution with the addition of PC. Differences between traditional micelles and "unimolecular micelle" dendrimers were also examined. These studies further confirm that the PAHs did not reside in the "analogous" palisade region of the dendrimers as they do in micelles. The PAHs must reside in the outermost branches of the dendrimer, but sufficiently far enough away from the charged surface groups, where PC associated, to prevent fluorescence quenching. This work further illustrates the differences between "unimolecular micelle" dendrimers and traditional micelles.     

New Dendrimers: Synthesis and Characterization of Popam - Pamam Hybrid Dendrimers

Recently developed multifunctional cancer therapeutic nano-device production is based on poly(amidoamine) PAMAM generation 5 (G5) dendrimer as a carrier 1-5. Scale up synthesis of this nano-device is limited because of long reaction sequence (12 reaction steps) and long and not easy work up of the products after each reaction step. Combination of poly(propyle-imine) and poly(amidoamine) synthesis can improve the production of the drug carrier.In this paper we give a general overview of the synthesis and characterization of a series of novel hybrid dendrimers which we coined as novel POMAM hybrid dendrimers, constructed from poly(propylene-imine) (PPI or POPAM) core and poly(amidoamine) PAMAM shells. The synthesis was accomplished by a divergent reiterating method involving repeating subsequent Michael addition and amidation reactions. Each generation of the newly synthesized dendrimer was characterized by using HPLC, GPC, NMR and AFM.     

Controlled interparticle spacing through self-assembly of Au nanoparticles and poly(amidoamine) dendrimers

Control of particle-particle spacing is a key determinant of optical, electronic, and magnetic properties of nanocomposite materials. We have used poly(amidoamine) (PAMAM) dendrimers to assemble carboxylic acid-functionalized mixed monolayer protected clusters (MMPCs) through acid/base chemistry between the particle and dendrimer. Small angle X-ray scattering was then used to establish average inter-MMPC distances. Five generations of PAMAM dendrimer (0, 1, 2, 4, 6) were investigated, with a monotonic increase in interparticle spacing from 4.1 to 6.1 nm observed with increasing generation.     

Synthesis and metal binding properties of salicylate-, catecholate-, and hydroxypyridinonate-functionalized dendrimers

The synthesis, characterization, and metal-binding studies of chelate-functionalized dendrimers is reported. Salicylate, catecholate, and hydroxypyridinonate bidentate chelators have been coupled to the surface of both poly(propyleneimine) (Astramol) and poly(amidoamine) (Starburst, PAMAM) dendrimers up to the fifth generation (64 endgroups). A general method has been developed for the facile and high quality chromatographic purification of poly(propyleneimine) and poly(amidoamine) dendrimer derivatives. One- and two-dimensional (TOCSY) 1H NMR experiments and electrospray ionization mass spectrometry (ESI-MS) have confirmed the exhaustive coupling of these chelators to the primary amine functionalities of the dendrimers. Spectrophotometric titrations were used to investigate the metal binding ability of these macrochelates. Spectral analysis shows that ferric iron binding to these ligands is localized to the chelating endgroups. The ability of these dendritic polymers to bind large numbers of metal ions may lead to applications as metal sequestering agents for waste remediation technologies.     

Preparation, characterization, and electrocatalytic activity of surface anchored, Prussian Blue containing starburst PAMAM dendrimers on gold electrodes

Gold bead electrodes were modified with submonolayers of 3-mercaptopropionic acid or 2-aminoethanethiol and further reacted with poly(amidoamine) (PAMAM) dendrimers (generation 4.0 and 3.5, respectively) to obtain films on which Prussian Blue (PB) was later absorbed to afford mixed and stable electrocatalytic layers. Experiments carried out with these novel materials not only showed an improved surface coverage of PB on the dendrimer modified electrodes as compared to PB modified gold electrodes prepared under acidic conditions, but also showed an increased stability at neutral pH values for one of the dendrimer containing substrates where the PB film on a bare gold electrode is simply not formed. The dendrimer modified electrodes were also tested as electrocatalytic substrates for the electroxidation of L(+)-ascorbic acid (AA), and it was found that their sensitivity as well as the corresponding detection limits were improved as compared to the voltammetric response of a Au-PB modified electrode. On the basis of UV-visible (UV-vis) spectroscopy and electrochemical experiments, it is suggested that the PB molecules are located within the dendritic structure of the surface attached PAMAM dendrimers.     

Scavenging DPPH radicals catalyzed by binary noble metal-dendrimer nanocomposites

Catalytic activity of gold-platinum, gold-palladium, and platinum-palladium dendrimer nanocomposites for scavenging 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals was investigated. The gold-platinum and gold-palladium dendrimer nanocomposites were prepared via simultaneous reduction by sodium borohydride in the presence of poly(amidoamine) (PAMAM) dendrimers with amine or carboxyl terminal groups. The particles were not mixtures of monometallic particles but alloyed bimetallic particles. Bimetallic particles exhibited higher catalytic activity than monometallic ones.     

Reorientational Dynamics of Polyethylene Glycol/PAMAM Dendrimer Blends

The reorientational dynamics of dipoles in a series of blends of Polyethylene Glycol (PEG) and poly(amidoamine) (PAMAM) dendrimers were investigated by broadband dielectric relaxation spectroscopy (DRS). Measurements were performed over a wide range of frequency and temperature. Neat PEG exhibits three relaxation processes: the segmental process in the amorphous phase and two faster processes due to the localized motions in the amorphous regions and the rotation of hydroxyl end groups. Addition of dendrimers to the PEG matrix slows down the segmental process in the amorphous phase, but has no effect on the relaxation time of local processes in PEG. However, H-bonding which forms between the PEG oxygen and the amino groups on dendrimer surface is responsible for a shift of local processes in dendrimers to lower frequency. A detail analysis of the effect of temperature, concentration of dendrimers and molecular weight of PEG on the relaxation dynamics is offered.