S,Fe共掺杂纳米TiO_2的制备及其光催化性能

以水热法制得了S,Fe共掺杂的纳米TiO2光催化剂(TiO2-S-Fe),XRD分析表明,其为锐钛矿晶型,S,Fe掺杂能抑制TiO2粒径的生长;UV-vis漫反射表明,TiO2-S-Fe对可见光吸收增强,吸收带边明显红移;XPS显示S,Fe共掺杂,使得TiO2表面羟基氧含量提高,从而提高催化剂活性;可见光降解甲基橙溶液结果表明,共掺杂样品光催化效果优于单掺样品,S和Fe共掺杂对提高TiO2可见光活性具有协同效应。当Fe3+∶S∶Ti(摩尔比)=0.005∶1∶1,180℃下水热反应3 h时,制得的TiO2-S-Fe可见光催化活性比纯TiO2的活性提高了约10倍。     

多种光源下氮掺杂TiO_2光催化降解染料废水的研究

以尿素为氮源,采用溶胶-凝胶法制备了氮掺杂纳米TiO2粉末,以甲基橙溶液为模拟染料废水,分别在可见光、模拟太阳光和紫外光条件下,研究了氮掺杂纳米TiO2光催化降解染料废水的性能。结果表明:氮掺杂可以提高TiO2的可见光催化活性;氮含量和煅烧温度对氮掺杂TiO2光催化活性影响较大,n(N)∶n(Ti)为10%且经500℃煅烧的氮掺杂TiO2在可见光和模拟太阳光下均具有最佳的光催化活性;然而在紫外光下,氮掺杂TiO2的光催化活性低于未掺杂的TiO2样品。     

提高纳米二氧化钛可见光光催化活性研究的进展

综述了近年来提高纳米TiO2可见光光催化活性的研究,主要包括:对纳米TiO2进行表面复合与衍生、金属离子掺杂、半导体偶合、非金属元素掺杂改性和染料敏化等技术,并分析了各种不同掺杂改性机理.最后,展望了提高纳米TiO2可见光光催化活性研究进展的前景.     

S掺杂TiO_2/粉煤灰复合材料的制备及光催化性能的研究

以钛酸四丁酯为前驱体,粉煤灰为载体,采用溶胶凝胶法制备了掺杂不同质量分数S的TiO2/粉煤灰复合纳米材料。用红外光谱(IR)、X射线衍射(XRD)、扫描电镜(SEM)及能谱分析(EDS)等测试手段对其进行了表征,以甲基橙的降解为模型反应,评价了试样光催化活性。结果表明,掺杂TiO2/粉煤灰具备较高可见光催化活性,原因是掺杂的硫取代TiO2中的晶格氧形成Ti—S键,使TiO2的带隙能窄化引起对可见光的响应,增强催化剂对可见光的吸收,与未掺杂的TiO2/粉煤灰相比较,掺杂负载型二氧化钛催化剂能够获得更高的光催化活性。     

二氧化硫脲为硫源制备硫掺杂二氧化钛及其光催化活性

以钛酸四丁酯为TiO2的前驱物,二氧化硫脲为掺杂硫的源物质,采用溶胶-凝胶法制备了掺硫改性的TiO2光催化剂。采用XRD对制备的掺硫二氧化钛结构进行了表征,探讨了溶胶-凝胶制备工艺、硫掺杂量及催化剂煅烧温度对该催化剂光催化活性的影响。结果表明,掺硫改性的TiO2经600℃煅烧后光催化活性有了明显提高,且硫的掺杂有一个最佳值,即二氧化硫脲的掺杂质量百分数为4%。经掺硫改性后的TiO2在可见光区具备更强的光催化活性,在波长不低于400nm的可见光作用下,对亚甲基蓝的4 h降解率最高可达89.5%。     

氮掺杂制备锐钛矿型纳米TiO2及降解甲基橙的研究

采用溶胶凝胶法制备了氮掺杂TiO2光催化剂。考察了氮的掺杂量、热处理温度对TiO2光催化能力的影响。用XRD、 SEM和紫外-可见光分度计对样品的晶型、形貌和光催化性能进行表征。结果表明氮的掺杂有助于改善TiO2的光催化性能,在灯光照射下5％N-TiO2煅烧温度为450℃时表现出较高的光催化活性和降解甲基橙溶液的能力,在80 min内降解甲基橙溶液达到了98％。     

掺杂改性TiO2可见光光催化剂研究的最新进展

纳米TiO2在紫外光照射下具有良好的光催化活性,在环境污染物治理方面具有重要的应用前景。为提高TiO2对可见光的吸收,常常需要对TiO2进行掺杂改性以缩小其禁带宽度。本文综述了近些年来国内外在金属掺杂、非金属掺杂、金属-金属共掺杂、金属-非金属共掺杂、非金属-非金属共掺杂以及杂多酸盐掺杂改性TiO2光催化剂方面的最新进展,并对TiO2可见光光催化剂的研究进行了展望。     

La掺杂TiO2分子印迹光催化剂的制备及其性能EI北大核心CSCD

以乙酰氨基苯酚（APAP）为模板剂,钛酸四丁酯为前驱体、硝酸镧为掺杂剂,经溶胶-凝胶法制各了La掺杂分子印迹TiO2。对La掺杂分子印迹TiO2光催化剂样品性能进行了表征,以紫外及可见光（2〉400nm）催化降解APAP模拟废水,考察了La掺杂量、焙烧温度对光催化活性的影响。结果表明：La掺入抑制了锐钛矿晶粒生长,比表面积增加,可见光吸收增强,光催化活性提高;且当n（La）：n（Ti）=0．60％,500℃热处理2h,样品的光催化活性最佳,光催化降解10mg／LAPAP模拟废水,紫外光照射70min去除率为85.5%,总有机碳（TOC）去除率达62.5%;可见光照射40h去除率为90.8%。     

纳米TiO2抗菌剂的改性及在抗菌塑料中的应用研究

纳米TiO2具有强氧化性和亲水性,在抗菌剂方面有广泛的应用前景。由于TiO2的带隙能较高,需在紫外光照射下有较好的抗菌效果,目前国内外学者采用金属及非金属离子掺杂的方法改进TiO2在可见光下的光催化活性,增强纳米TiO2抗菌剂在可见光下的抗菌能力,本文对纳米TiO2抗菌剂改性研究情况及其在抗菌塑料中的应用情况进行了综述。     

胶原纤维为模板介孔TiO_2和Pt掺杂TiO_2纤维的制备及光催化降解黑液（英文）

以胶原纤维为模板,Ti（SO4）2为钛源,合成了新型光催化剂—介孔TiO2和Pt掺杂TiO2纤维。通过场发射扫描电镜（FESEM）、比表面积和孔径分析、紫外–可见光谱和分子荧光光谱等检测手段对两种介孔TiO2纤维的结构和物理性能进行了表征。FESEM分析表明,胶原纤维的表面结构能被较好地保留在介孔TiO2和Pt掺杂TiO2纤维中。N2吸附–脱附等温线为IV型,表明TiO2和Pt掺杂TiO2纤维具有介孔结构。基于结构的特点,在可见光和UV-A激发下,介孔TiO2和Pt掺杂TiO2纤维表现出强于商品级纳米TiO2（Degussa P25）的总有机碳（TOC）脱除率。此外,Pt的掺杂能明显改善介孔TiO2的光催化活性。光催化实验表明,Pt掺杂TiO2纤维（1.0g L–1）在可见光照射420 min后,黑液的TOC脱除率为37%;UV-A（360 nm）照射300min后,TOC脱除率为51%。因此,制备的介孔TiO2和Pt掺杂TiO2纤维作为一类性能优异的光催化剂,能用于黑液的光催化降解,并在其他类似的反应条件下具有潜在的应用前景。     

COMPARISON OF METHODS OF ANALYSIS OF GYPSUM1

The different analytical methods proposed for the evaluation of gypsum have been subjected to an experimental test. A combination method, consisting of a fusion with KHCO₃ and determination of CaO by KMnO₄ titration, the SO₃ by Andrews method of titration of BaCrO₄ has been found to give very reliable results with the least consumption of time.     

氢气纯度分析方法准确性的探讨

ONACCURACYOFANALYSISOFOFHYDROGEN1前言我公司目前应用的氢气纯度分析方法有两种,一种是爆炸反应法,另一种是焦性没食子酸吸收法。几年来,人们对两种分析方法的准确性曾有过褒贬不一的评论。这里我们也谈谈自己粗浅的观点。2爆炸法测定氢气纯度一定量的氢气样品与适量的空气之均匀混合物因反应后生成液体水而引起气体体积减少,减少的体积等于参加反应气体体积之和。其中l／3为氧气,2／3为氢气。根据氢气取样量和反应前后混气体体积之差,以及氢气在反应中的体积比例关系,可计算出样品的氢气纯度。计算公式式中：A一混…     

茶多酚提取方法进展

本文综述了国内外现有茶多酚提取方法的现状以及近期的研究进展，并对其优缺点进行了评价。这将有助于中低档茶的综合利用和茶多酚的进一步开发应用。     

HEASUREHENT OF INSTANTANEOUS RATES OF LOSS OF VOIATILE COMPOUNDS DURING DRYING OF DROPS

A novel technique serves to monitor instantaneous rates of loss of a volatile solute from a suspended drop during drying. A highly sensitive electron capture detector is used to monitor concentrations of SF6 released into a flowing gas stream from a suspended, drying drop. Simultaneously, the appearance and morphological development of the drop are monitored with a video camera. This provides the wherewithal of relating instantaneous rates of loss of the volatile solute to particular events during the development of particle morphology.

Initial experiments have been carried out with drops of aqueous solutions of glucose, sucrose, maltodextrin and coffee extract. The results clearly display the onset of the volatiles-retentive selective diffusion phenomenon. There is also substantial loss of the volatile component later in the drying process, when the drops undergo repeated ex ansion, bursting and cratering due to the formation of internaf bubbles. These experiments appear to be the first quantitative demonstration of major losses accompanying changes in drop morphology.     

SEDIMENTATION OF BINARY MIXTURES OF PARTICLES OF UNEQUAL DENSITIES AND OF DIFFERENT SIZES

A model is developed for the sedimentation from a suspension of two particle species of unequal densities and of different sizes. The composition and the thickness of various layers in the sediments are predicted using graphical and analytical methods. The model predictions were in excellent agreement with experimental results, when the particle size ratio was ≥ 108. When size ratio of the particles was 2.60 and 4.31 the agreement occurred in about 50 percent of the cases.     

ANALYSIS OF RECENT MEASUREMENTS OF THE VISCOSITY OF GLASSES

Viscosity of Simple Soda-Silicate 500° to 1400°C Comparison of the results given by English with those of Washburn, Shelton and Libman, indicates a discrepancy in the absolute values of log₁₀ viscosity amounting to 0.6, those of Washburn et al., being relatively too high. If correction for this is made, the isothermal curves of log₁₀ viscosity as a function of soda content are smooth up to 50% Na₂O, showing no inflection. The observations as a function of temperature T are all represented within accidental error by an equation of the type where all three constants vary regularly with the composition. Change of Viscosity of Glass (6SiO₂, 2Na₂O) due to Molecular Substitution of CaO, MgO and Al₂O₃ for Na₂O The effect is clearly brought out by plotting (from the results of English) the change of log₁₀η due to the substitution as a function of temperature. The curves each show a sharp bend at a temperature between 840° and 1050°C, which is designated the aggregation temperature T_a. If we divide these curves by the corresponding percentage substituted, we get curves for each oxide which are straight and parallel below the aggregation temperatures, the slopes (increase of change of log₁₀η per 100°C) being −0.056 (CaO), −0.055 (MgO), −0.018 (A1₂O₃) per per cent oxide substituted. For substitution of 1/2 molecule the slopes are −0.325 (CaO), −0.23 (MgO) and −0.18 (Al₂O₃) per 100°. At the aggregation temperature the change of log₁₀η per per cent is a minimum, 0.03 to 0.06 for CaO, 0.12 for MgO, 0.07 for Al₂O₃. Evidence of Aggregation in Glasses, from viscosity Measurements The sharp bends in the plots of change of log₁₀η due to substitution of an oxide for Na₂O, suggest the beginning of molecular aggregation at these temperatures. These aggregation temperatures are close to the devitrification temperatures, but the effect on the viscosity curves cannot be due to actual devitrification since it does not change with time. Taking the aggregation temperatures as equal to devitrification temperatures, additional isotherms are roughly sketched into the equilibrium triangle of the system Na₂O-CaO-SiO₂. Change of Viscosity of Glass (4SiO₂, 2Na₂O) due to of Substitution of B₂O₃ for SiO₂ The change of log₁₀η (from the results of English) is plotted as a function of temperature, and also the change of log₁₀η per per cent B₂O₃. The curves are more complex than for the substitution for Na₂O.     

环氧树脂羟基值测定方法的研究

利用乙酸酐、吡啶和浓硫酸混合的乙酰化试剂测定环氧树脂中羟基值含量的方法具有操作简便、滴定终点明显和分析结果误差小等优点。     

骑式摩托车油箱喷涂工艺的改进

面对日益激烈的市场竞争,摩托车油箱外观质量越来越成为影响销售的因素之一。文章介绍了改进工艺后的油箱涂装,该涂装体系提高了油箱外观的丰满度,降低了油箱涂装的生产成本。     

几种针状焦性能对比

针状焦分石油系和煤系两大类,这主要取决于针状焦的原料来源。在同一系列中由于原料不同和工艺条件不同 ,针状焦的各自性能也不相同。针状焦是生产超高功率石墨电极和高功率石墨电极的主要原料 ,针状焦的性能对石墨电极的质量有至关重要的影响。所以对针状焦性能以及其对石墨电极质量影响的研究十分必要的。以下是常用的几种进口针状焦和国产针状焦的性能对比。１原料性能分析对比原料试样包括４种针状焦 ,其中两种为进口针状焦：三菱针状焦和新日化针状焦;另两种为国产针状焦：鞍山针状焦和锦州针状焦。其中除锦州针状焦是石油系针状焦外…     

用两个形状指数表征粉煤灰颗粒形貌的研究

引用两个形状指数表征颗粒形状的概念,即先将颗粒形状近似为椭圆,再将椭圆图像分离:以圆为基准的颗粒宏观形状指数δ;以光滑椭圆为基准的颗粒轮廓凹凸度,即微观形状指数ζ。分析和发展了近似椭圆模型。并运用图像分析仪对粉煤灰、水泥样品进行实验。结果表明,粉煤灰颗粒的两个形状指数δ和ζ都大于水泥颗粒。证明粉煤灰颗粒的球形度、表面光滑度优于水泥,而且,随着粒径增大,δ和ζ呈下降趋势,表明磨制颗粒越粗。(?)粒形状越不规则。文中还运用近似椭圆模型再现了颗粒的模拟图像。