冷轧薄宽带钢局部型中浪瓢曲变形行为研究

针对薄宽带钢冷轧过程中易发多发的局部型中浪瓢曲缺陷,引入非均匀载荷宽度、弹性约束系数及平均张应力建立了屈曲变形的解析计算模型。应用能量最低原理对屈曲变形区域进行搜索求解,得到了局部型中浪屈曲临界条件(包括临界应力、屈曲波长和屈曲波宽),获得了其与非均匀载荷宽度、弹性约束系数、平均张应力的关系,并发现平均张应力是产生局部型中浪的重要影响因素。应用样条有限元方法对局部型中浪进行数值仿真分析,验证了屈曲解析计算方法的正确性。在实验轧机上进行了轧制研究,通过轧制获得了局部型中浪屈曲模态,对实验结果分析得到了相对应的屈曲临界条件,与解析法和样条有限元法结果基本吻合,证明了样条有限元计算方法与解析计算方法的正确性及其工程应用价值。     

INFLUENCE OF DAMPING MODELS ON DYNAMIC ANALYSES OF A BASE-ISOLATED COMPOSITE STRUCTURE UNDER EARTHQUAKES AND ENVIRONMENTAL VIBRATIONS

Structural design simultaneously governed by earthquakes and environmental vibrations has received a lot of attention in recent years.Base-isolated composite structures are typically used in the above-mentioned structural design.The corresponding analysis involves validating structural safety under earthquakes and human comfort under environmental vibrations through a time-history analysis.Thus,a reasonable damping model is essential.In this work,the representatives of viscous damping model and rate-independent damping model,namely the Rayleigh damping model and uniform damping model,were adopted to investigate the influence of damping models on the time-history analysis of such structural designs.The energy dissipation characteristics of the above-mentioned damping models were illustrated via a dynamic test of recycled aggregate concrete specimens.A case study was performed on a base-isolated steelconcrete composite structure.The dynamic responses under the excitation of earthquakes and environmental vibrations were compared using different damping models.The uniform damping model was found to be more flexible than the Rayleigh damping model in dealing with excitations with different frequency components.The uniform damping model is both theoretically advantageous and easy to use,demonstrating its potential in dynamic analysis of structures designed simultaneously governed by earthquakes and environmental vibrations.     

A VIBRATION RECOGNITION METHOD BASED ON DEEP LEARNING AND SIGNAL PROCESSING

Effective vibration recognition can improve the performance of vibration control and structural damage detection and is in high demand for signal processing and advanced classification.Signal-processing methods can extract the potent time-frequency-domain characteristics of signals;however,the performance of conventional characteristics-based classification needs to be improved.Widely used deep learning algorithms(e.g.,convolutional neural networks(CNNs))can conduct classification by extracting high-dimensional data features,with outstanding performance.Hence,combining the advantages of signal processing and deep-learning algorithms can significantly enhance vibration recognition performance.A novel vibration recognition method based on signal processing and deep neural networks is proposed herein.First,environmental vibration signals are collected;then,signal processing is conducted to obtain the coefficient matrices of the time-frequency-domain characteristics using three typical algorithms:the wavelet transform,Hilbert-Huang transform,and Mel frequency cepstral coefficient extraction method.Subsequently,CNNs,long short-term memory(LSTM)networks,and combined deep CNN-LSTM networks are trained for vibration recognition,according to the time-frequencydomain characteristics.Finally,the performance of the trained deep neural networks is evaluated and validated.The results confirm the effectiveness of the proposed vibration recognition method combining signal preprocessing and deep learning.     

有限宽度和椭圆孔形状对缺口层合板强度预测的影响

本文采用有限元方法对正交各向异性材料含有不同椭圆孔形状的有限宽度板作了分析,给出了有限宽度和椭圆孔形状对应力集中因子K₁和孔边应力分布σ_y(x,0)的影响公式。数值结果表明:正交各向异性板的有限宽度和椭圆孔形状对K_r和σ_y(x,0)的影响均与各向同性材料不同,所以有限宽度和椭圆孔形状将对缺口层合板强度的预测产生影响。      

复合材料加筋板的动力分析

本文构造了九自由度三角形拟协调罚函数复合材料板单元与六自由度复合材料梁单元,考虑了剪切变形与转动惯量的影响。用这两种单元对复合材料加筋板的自由振动、阻尼特性和瞬态响应问题进行了研究,给出一些有益结果。      

数字3D电影最新动向

全球数字3D电影领域的领头羊Real D公司于10月17日与欧洲投资商Terra Firma公司旗下在泛西欧拥有1600块银幕的Odeon院线以及UCI院线签署协议,将于未来2年中在英国、爱尔兰、德国、奥地利以及葡萄牙合作安装500块数字3D银幕.     

第十二届中国建筑企业高峰论坛在绍兴市举行王治安主持会议并致辞

<正>本刊讯2014年12月23日,由中国建设报社、浙江省住房和城乡建设厅、绍兴市人民政府主办的第十二届中国建筑企业高峰论坛在绍兴市举行。来自全国各地的建筑行业主管部门、行业协会负责人,专家学者及企业代表等300余人齐聚一堂,围绕"创新融合,开放共赢"主题,共同分享了一场建筑行业思想盛宴。中国建设报社党委书记杜久才、社长翟建和中国建筑装饰协会会长李秉仁、中国土木工程协会副理事长刘     

9.3大阅兵:高标准让军魂荡气回肠

<正>阅兵是展示辉煌的时刻,而为这一辉煌采取的所有的标准,不啻也是宝贵的财富,应当成为践行标准的榜样……这个月最令人难忘、最引人自豪、最提振国威的事情,当属"9.3"大阅兵,它有着以往没有的多重的亮点:首次以纪念抗日战争暨世界反法西斯战争胜利为阅兵主题,彰显维护和平是全世界人民共同的愿望。首次邀请外国军队代表参加分列式,体现纪念大会的国际性。首次组织抗战老兵包括国民党老兵参加,体现了对历史的尊重,体现全民族抗战的特色。首次编组英模部队方队受阅,展示中国共产党在抗战中定海     

车类影视广告拍摄——光线表现篇

汽车能满足人们生活、娱乐、工作的各种需求,为生活添加乐趣.商务车、房车、越野车或轿车,不管是驰骋还是安静地停放,都具有他们独特的气质,外型、轮廓、结构、颜色、车漆的纹理及其光泽度各有特点.拍摄广告就是要把汽车的这些独到之处提炼、表达出来,在观赏者印象中建立一个全方位的立体形象,激发消费者的购买愿望,这里就必须用到一个非凡的摄影手段--光线.     

CIG前驱膜叠层方式对CIGS膜成分和结构的影响

采用中频交流磁控溅射方法制备了三种不同叠层方式的CuInGa（CIG）前驱膜。采用固态法硒化,获得了CIGS吸收层。采用SEM和XRD观察和分析了薄膜的成分、组织结构和表面形貌。着重分析不同叠层方式的CIG前驱膜对CIGs吸收层薄膜成分、晶体结构的影响。结果表明,三种叠层方式的前驱膜都可以获得成分均匀、结构一致的CIGS吸收层薄膜。Ga可以有效抑制In2Se挥发相生成,保持成分的稳定性。以CuGa（top）／CuIn（bottom）形式的前驱膜有利于形成紧密晶粒排列的CIGS。     

几种卓越的新款型数码照相机——索尼F808,佳能Pro 1,富士S7000,富士S20 Pro

本文扼要介绍了最近进入市场的几种卓越的新款型数码照相机。如:索尼F808,佳能Pro1,富士S7000,富士S20Pro等,阐述其各自的基本结构和性能特点。以及对实际使用效果的评论。     

国外工业射线胶片概况

本文扼要介绍了国外几家主要感光器材工业公司，如：爱克发、柯达和富士生产，用于无损探伤的工业射线照相胶片系列的品种、性能、规格和应用范围。     

基于VB实现工控机与多设备间的Modbus通信

介绍了一种使用VisualBasic编写的通信程序，利用Profibus通信协议实现工控机与岛电PID控制器、富士系列变频器之间的共同通信，并对他们的通信协议作了阐述。通过大量的厂家实际使用表明，该软件运行良好，可靠性高，数据采集准确。     

浅谈先进摄影系统（APS）

本文介绍了1996年即将面市的先进摄影系统（APS）,包括其胶片和相机。该系统是由几家庞大的摄影器材厂家,如:柯达、富士、美能达、尼康和佳能,所共同开发的;据称将取代传统的35mm摄影系统。     

外偶型彩色反转片面临的挑战

本文研讨58年以前问世的、柯达公司生产的“外偶”型彩色反转片;“柯达柯罗姆”。它微粒而有高的清晰度和分辨率,饱和的色彩,较常规的“内偶”型彩色片优越。现在柯达公司和富士公司新一代反转片产品:埃克塔柯罗姆Lumiere100,富士柯罗姆Velvia50彩色反转片,已达到柯达柯罗姆彩色反转片25/64的质量。     

T颗粒X线胶片和矽肺X线摄影

本文以实例表明用柯达T颗粒感绿X线胶片配合专用的硫氧化钆/铽稀土元素绿增感屏进行矽肺肺摄影可以取得优越的临床诊断效果:细微结构清晰、信息量增加,有利于早期病变的检出。X线投照量仅需作对比用的常规富士感蓝X线胶片和钨屏组合的五分之一至三分之一。     

Shear bond strengths of glass-ionomer cements to sound and to prepared carious dentine

Summary The aim of this study was determine whether bonding of glass-ionomer cements to non-carious dentine differed from that to carious dentine. Five commercial cements were used, namely Fuji IX GP, Fuji IX capsulated, Fuji IX Fast capsulated (all GC, Japan), Ketac-Molar and Ketac-Molar Aplicap (both 3M-ESPE, Germany). Following conditioning of the substrate with 10% poly (acrylic acid) for 10 s, sets of 10 samples of the cements were bonded to prepared teeth that had been removed for orthodontic reasons. The teeth used had either sound dentine or sclerotic dentine. Shear bond strengths were determined following 24 h storage. For the auto-mixed cements, shear bond strength to sound dentine was found not to differ statistically from shear bond strength to sclerotic dentine whereas for hand-mixed cements, shear bond to sound dentine was found to be higher than to carious dentine (to at least p < 0.05). This shows that the chemical effects arising from interactions of glass-ionomer cements with the mineral phase of the tooth are the most important in developing strong bonds, at least in the shorter term.     

Sealing Fuji Prescale pressure sensitive film for protection against fluid damage: the effect on its response

Fuji Prescale pressure sensitive film will record pressures as a characteristic pink stain; the optical density response of these stains can be calibrated to allow subsequent conversion into full field pressure data. Due to its ease of use, Fujifilm has been employed extensively within animal joints. For this application, the potential disruption to the stain producing mechanism posed by the presence of joint fluids has led to the widespread use of fluid proof materials, within which the Fujifilm is protected; however, little data have been presented on the effect of protective materials on the subsequent stain response. This paper presents a quantitative assessment of the mean optical density responses of both protected film and a control group of unprotected film; the first group consisted of Fujifilm sealed between two layers of a readily available self-adhesive material, forming sealed packets. The results indicated significant differences between groups (p<0.05); however, the effect of these differences is dependent on the method used to produce pressure data. Qualitative observations indicated that sealing reduced stain uniformity; preliminary qualitative observations regarding data manipulation methods to overcome this phenomenon are presented. Consequently, this work indicates the importance of validating methods for protecting Fuji film from fluid damage and their associated methods of data manipulation.     

<Emphasis Type="Italic">In vitro</Emphasis> microhardness of glass ionomer cements

This study evaluated the surface microhardness of four glass ionomer cements and a composite resin (Fuji IX, Ketac Molar, Vidrion R, Vitromolar and Z 250). Ten specimens of each glass ionomer cement with 8.0 mm diameter and 5.0 mm high dimensions were made and Vicker’s microhardness measurements were taken at 1 day and 1 week after initial setting reaction. The results were analyzed using Student’s T test and Tukey test (p < 0.05) and demonstrated that the values of microhardness increased after 1 week, with the exception of Fuji IX. Resin composite Z250 presented the greatest values for microhardness.     

国外主要影像材料公司来华申请专利最新动态

通过柯达、富士和柯尼卡三家同行业巨头在中国申请专利的技术内容，分析他们各自的科研开发方向、中国市场战略和某些领域的技术发展趋势。