共查询到20条相似文献,搜索用时 265 毫秒
1.
随着网络多媒体业务的发展和应用,广播加密在多媒体业务的数字版权保护中起着愈加重要的作用,其安全性研究已成为目前的焦点.广播加密系统是一种允许数据内容被数据供应商通过广播信道安全地分发给其授权的合法付费用户的安全机制.其作用是保证了所有授权用户解密所接收的加密广播信息,获得信息主密钥,而未授权用户(未付费用户)无法获得数据内容,获得信息主密钥.本文提出了一个新的基于RSA加密方案的广播加密方案,较大的提高通信传输带宽及加解密计算代价等方面的综合性能和效率. 相似文献
2.
萧萍 《工业仪表与自动化装置》2016,(1):99-101
IBC虽然避免了复杂的身份认证和庞大的密钥管理问题,但由于IBC的密钥托管机构PKG掌握着主密钥s,而用户的私钥都是藉由s通过一个公开的私钥算法来生成,因此一旦主密钥s泄露或PKG不诚实,则用户的一切信息都将暴露,再无安全性可言。为了解决这个问题,该文提出了一种基于身份的混合加密方案。 相似文献
3.
详细介绍一个新的基于混沌的无线电保密通信方法.应用混沌生成数据的非周期性进行无线电信息加密解密,给出系统原理图、混沌生成方法、加密解密详细流程及示例,并给出安全度计算方法.实验结果证明了混沌无线电保密通信的有效性,为无线电信息安全开辟了一条新的技术途径. 相似文献
4.
基于傅里叶变换和Gyrator变换的图像加密 总被引:1,自引:0,他引:1
基于傅里叶变换和Gyrator变换对图像进行加密。将原始图像和第一个随机相位函数叠加后做傅里叶变换,然后将频域信息减去第二个随机相位函数后得到一个复函数。复函数经过Gyrator变换得到加密图像,将第二个随机相位函数作为相位密钥,同时将Gyrator变换角度作为密钥,由此增大了密钥空间和增强了系统安全性。通过数字方法对图像进行加密,解密过程用光学装置实现。计算机模拟结果表明,该加密方法解密图像质量好,系统安全性良好。 相似文献
5.
为了拓展对计算全息加密图像的解密方法,针对非法攻击难度大的对称-非对称混合加密系统,提出了一种利用神经网络恢复混沌虹膜相位掩模计算全息加密图像的方案。对明文图像进行加密,生成计算全息的密文图像,制作大量的密文明文图像对作为数据集。通过搭建神经网络不断地训练和测试,训练完成后的神经网络可以拟合出密文图像到明文图像的映射关系,解密时不再使用公钥和私钥对密文图像进行解密。实验结果表明:通过神经网络恢复出的图像与明文图像相比,平均互相关系数为0.984,平均峰值信噪比为61.0 dB,平均结构相似性为0.77;对密文图像进行噪声污染,也可以恢复出较高质量的图像,实现了通过神经网络对密文图像解密的目的,方案是可行的并具有较好的鲁棒性。 相似文献
6.
由于混沌动力学系统具有伪随机性、确定性和对初始条件与系统参数的极端敏感特性,故将其与数字图像加密技术相结合,可构造出非常好的图像信息加密系统。提出基于驱动响应法实现图像加密和解密,经过仿真实验表明加密后原始图像无法从加密后的图像中提取原始信息,然而经过解密后的图像能达到与原始图像一致的效果。为了实现两异结构混沌系统在有限时间内同步数据安全通讯,分别改变线性映射关系参数和控制律参数对图像解密密钥敏感性进行分析,实验结果为图像与明文有很大差别。因此,证明了异结构混沌同步系统图像加密方法具有良好的安全性。 相似文献
7.
8.
9.
10.
11.
12.
GIS是获取、存储、分析和管理地理空间数据的重要工具.通过GIS技术在Delphi环境下的应用,设计并实现了一个架空高压线故障监控显示方案.可实现短路、断路、接地故障等多种故障的监控,并可以实现故障节点和故障线路的显示.主要实现了基本的地图创建、节点和线路信息管理、线路拓扑结构生成、故障显示等.系统通过接收高压线上各个监控模块上传的基本故障信息,对故障信息进行分析,并在地图上显示出故障位置和类型,同时给予一定的故障提示.实验表明,该方案可以很好地对故障进行监控和显示. 相似文献
13.
信息认证是指对网络中传输信息可靠性及完整性的确认,它在各类网络环境下的控制系统、电子商务、电子政务等多个领域有着重要而广泛的应用。目前采用的主要技术手段是采用询问- 应答机制,通过消息认证码实现。本文介绍了几种现有的信息认证方案,并结合现场总线控制系统中数据信息小、实时性高的特点,提出了一个基于时间的信息认证方案。它使用时间和消 息认证码 MAC,实现控制双方的双向认证,在运算量、速度方面都要优于现有的方案。 相似文献
14.
As the popularization of dual ring fieldbus, the optimized dual ring synchronization methods are still in short. The current synchronization methods are generally established in traditional industrial fieldbus, in which transmission is commonly considered in single track, the two-way transmitting cannot take full effect, and would result in unwanted idle load on equipment lines. In stamp-transferring part, the synchronizing algorithm is not properly processed to diminish the latency, so the real-time performance of entire system cannot be ensured. To support the synchronization control of stations in the CNC system, a real-time time synchronization method for dual ring fieldbus in the CNC system is designed in this paper. In this method a synchronizing message transmission scheme based on dual ring architecture and the synchronization algorithm between master and secondary stations are integrated. In the scheme, the clock models of both master and secondary stations are optimized with corresponding modules and the stamp data transmission based on the dual ring fieldbus is devised exclusively, so the transmitting efficiency improves with less idle work. In the algorithm, all the secondary stations can accomplish the consistent state with master station by updating clock discrepancy information in one communication cycle, and it takes the advantage of two-way transmitting and makes the best use of dual ring structure, so the real-time performance of the system can be promoted while retaining the precision of synchronization. To evaluate the performance, the costs of the method and errors during synchronizing are noted and analyzed based on the actual running environment in the industrial fieldbus. The results show that it reduces communication cost and ensures the smoothness of the system with low lag effects under heavy load. The proposed time synchronization method optimizes the architecture of sync message transmission in dual ring fieldbus, and improves the efficiency of time synchronization in the stations of CNC system. 相似文献
15.
Worst-case response time of aperiodc message in WorldFIP and its improvement in real-time capability
How to support real-time traffic of aperiodic messages using WorldFIP is investigated in this paper. Transmission of aperiodic message within WorldFIP is a very complicated procedure because it is concerned with left time in a microcycle and must successively experience three different stages, indicating, identifying, and transmitting aperiodic message. This paper presents an integrated approach to analyze the worst-case responding time (WCRT) of aperiodic message, through integrating transmission of periodic message and these three stages of aperiodic message together. To decrease pessimistic factors in WCRT of aperiodic message, priority of aperiodic message is considered. Detail analysis of the WCRT of aperiodic message indicates that the current scheduling method cannot effectively utilize priority to guarantee important aperiodic messages. Then improved scheduling methods, one adding priority and another adjusting the schedule table, are proposed. The improved methods are finally validated by case studies. 相似文献
16.
对射线检测系统的控制部分进行了研究,提出了基于CAN的分布式控制方式,介绍了信息帧格式和数据链路控制规程,完成了CAN接口和有关通信软件,设计了相应的下位机控制方式,同对检测过程的实时监控,同时讨论了其进一步的前景。实际应有表现,以上方法具有通信速度高、可靠性好、灵活方便等优点,非常适合于射线检测站的控制,同时也可应用于其它相关场合。 相似文献
17.
提出了在工作流层、过程管理层及企业应用层3个层次上考虑工作流管理系统的集成性、开放性,并分别建立了集成方案:通过Web Service技术、KQML/SOAP消息实现工作流层集成;通过任务耦合实现项目管理与工作流管理之间的集成;通过企业基础设施、应用服务注册及适配器封装实现应用层集成。最后对集成方案进行了验证。 相似文献
18.
一种冗余机器人逆运动学求解的有效方法 总被引:7,自引:0,他引:7
针对7自由度冗余机械臂的逆运动学提出了一种新的求封闭解的方法。保证系统实时性的前提下采用二次计算法,在梯度投影法得出优化不精确解的基础上,根据系统结构特点用固定关节法进行再次计算,最终得到一组精确的优化解。既充分利用了系统的冗余特性又大大提高了计算精度。以7自由度仿人机械手臂为例具体阐述了这种方法。从手臂末端轨迹精度方面对梯度投影法和二次计算法的仿真结果进行了比较分析,说明了二次计算法在提高末端精度方面的有效性,并通过试验证明算法可以满足一般机器人系统的实时性要求。 相似文献
19.
20.
成组技术基础上的CAPP 总被引:4,自引:0,他引:4
臧照良 《机械制造与自动化》2006,35(5):91-93,97
指出了现实中的中小企业机械工艺设计中存在的缺陷;介绍了机械零件信息的描述方法和在成组技术基础上实施CAPP的具体内容。 相似文献