Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

Efficient Access to Conjugated Dienones and Diene‐diones from Propargylic Alcohols and Enolizable Ketones: A Tandem Isomerization/Condensation Process Catalyzed by the Sixteen‐Electron Allyl‐Ruthenium(II) Complex [Ru(η3‐2‐C3H4Me)(CO)(dppf)] [SbF6]

A large variety of conjugated dienones R¹R²CCHCHC(R³)C(O)R⁴ and diene‐diones R¹R²CCHCHC{C(O)R³}C(O)R⁴ have been synthesized in high yields by reacting terminal propargylic alcohols HCCCR¹R²(OH) with enolizable ketones R³CH₂C(O)R⁴ and β‐dicarbonyl compounds R³C(O)CH₂C(O)R⁴, respectively. The process, which is catalyzed by the 16e^‐ (η³‐allyl)‐ruthenium(II ) complex [Ru(η³‐2‐C₃H₄Me)(CO)(dppf)] [SbF₆] associated with CF₃CO₂H, involves the initial isomerization of the propargylic alcohol into the corresponding α,β‐unsaturated aldehyde R¹R²CCHCHO (Meyer–Schuster rearrangement) and subsequent aldol‐type condensation.     

Tungsten and Molybdenum 2,4,6‐Trimethylbenzylidyne Complexes as Robust Pre‐Catalysts for Alkyne Metathesis

A series of 2,4,6‐trimethylbenzylidyne tungsten and molybdenum complexes was prepared from the tribromides mer‐[MesCMBr₃(dme)] ( 9a , M=W; 9b , M=Mo, dme=1,2‐dimethoxyethane). Successive reaction of complexes 9 with lithium or potassium hexafluoro‐tert‐butoxide and lithium 1,3‐di‐tert‐butylimidazolin‐2‐imide, (Im^t‐BuN)Li, afforded the imidazolin‐2‐iminato complexes [MesCM{OC(CF₃)₂Me}₂(Im^t‐BuN)] ( 10a , M=W; 10b , M=Mo), whereas the reactions of 9 with three equivalents of LiOSi(O‐t‐Bu)₃ or KOC(CF₃)₃ gave [MesCM{OSi(O‐t‐Bu)₃}₃] ( 11a , M=W; 11b , M=Mo) and [MesCM{OC(CF₃)₃}₃] ( 12a , M=W; 12b , M=Mo), respectively. For comparison, the benzylidyne complex [PhCMo{OSi(O‐t‐Bu)₃}₃] ( 7b ) was also prepared, and its molecular structure together with those of 10a , 10b , 11b , 12a and 12b were established by X‐ray diffraction analysis. Complexes 10 and 11 were employed as pre‐catalysts for the alkyne metathesis of the test substrate 3‐pentynyl benzyl ether ( 13 ) at low catalyst loadings (1 mol%) in the presence of molecular sieve (5 Å). Comparative studies of these 2,4,6‐trimethylbenzylidyne species (MesCM) with their benzylidyne analogues (PhCM) revealed that the increased steric bulk renders the former more stable and manageable in air in solid form for shorter periods of time, but at the expense of a slower initiation, which requires higher temperatures or longer reaction times.

     

Vinyl‐addition copolymerization of norbornene and polar norbornene derivatives using novel bis(β‐ketoamino)Ni(II)/B(C6F5)3/AlEt3 catalytic systems

Copolymerization of norbornene (NBE) and polar norbornene derivatives undergoes vinyl polymerization by using novel catalyst systems formed in situ by combining bis(β‐ketoamino)Ni(II) complexes {Ni[R₁C(O)CHC(NR₃)R₂]₂ (R_l = R₂ = CH₃, R₃ = naphthyl, 1 ; R₁ = R₂ = CH₃, R₃ = C₆H₅, 2 ; R₁ = C₆H₅, R₂ = CH₃, R₃ = naphthyl, 3 ; R_l = R₂ = CH₃, R₃ = 2, 6‐(CH₃)₂C₆H₃, 4 ; R₁ = R₂ = CH₃, R₃ = 2, 6‐′Pr₂C₆H₃ 5 ; R₁ = C₆H₅, R₂ = CH₃, R₃ = 2, 6‐′Pr₂C₆H₃, 6 )} and B(C₆F₅)₃/AlEt₃ in toluene. The 1 /B(C₆F₅)₃/AlEt₃ catalytic system is effective for copolymerization of NBE with NBE OCOCH₃ and NBE CH₂OH, respectively, and copolymerization activity is followed in the order of NBE CH₂OH > NBE OCOCH₃ > NBE CN. The molecular weights of the obtained poly(NBE/NBE CH₂OH) reached 5.97 × 10⁴ to 2.07 × 10⁵ g/mol and the NBE CH₂OH incorporation ratios reached 7.0–55.4 mol % by adjusting the comonomer feedstock composition. The copolymerization of NBE and NBE CH₂OH also depend on catalyst structures and activity of catalyst followed in the order of 2 > 1 > 3 > 5 > 4 > 6 . The molecular weights and NBE CH₂OH incorporation ratios of poly(NBE/NBE CH₂OH) were adjustable to be 1.91–5.37 × 10⁵ g/mol and 9.5–41.1 mol %  OH units by using catalysts 1 – 6 . The achieved copolymers were confirmed to be vinyl‐addition type, noncrystalline and have good thermal stability (T_d = 380–410°C). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Facile,Efficient Copolymerization of Ethylene with Bicyclic,Non‐Conjugated Dienes by Titanium Complexes Bearing Bis(β‐Enaminoketonato) Ligands

Copolymerizations of ethylene with 5‐vinyl‐2‐norbornene or 5‐ethylidene‐2‐norbornene under the action of various titanium complexes bearing bis(β‐enaminoketonato) chelate ligands of the type, [R¹NC(R²)CHC(R³)O]₂TiCl₂ ( 1 , R¹=Ph, R²=CF₃, R³=Ph; 2 , R¹=C₆H₄F‐p, R²=CF₃, R³=Ph; 3 , R¹=Ph, R²=CF₃, R³=t‐Bu; 4 , R¹=C₆H₄F‐p, R²=CF₃, R³=t‐Bu; 5 , R¹=Ph, R²=CH₃, R³=CF₃; 6 , R¹=C₆H₄F‐p, R²=CH₃, R³=CF₃), have been shown to occur with the regioselective insertion of the endocyclic double bond of the monomer into the copolymer chain, leaving the exocyclic vinyl double bond as a pendant unsaturation. The ligand modification strongly affects the copolymerization behaviour. High catalytic activities and efficient co‐monomer incorporation can be easily obtained by optimizing the catalyst structures and polymerization conditions.     

Novel Ni and Pd(benzocyclohexan‐ketonaphthylimino)2 complexes for copolymerization of norbornene with octene

Two novel late transition metals complexes with bidentate O?N chelate ligand, Mt(benzocyclohexan‐ketonaphthylimino)₂ {Mt(bchkni)₂: bchkni ?C₁₀H₈(O)C[N(naphthyl)CH₃]; Mt ? Ni, Pd}, were synthesized. In the presence of B(C₆F₅)₃, both complexes exhibited high activity toward the homo‐polymerization of norbornene (NB) (as high as 2.7 × 10⁵ g_polymer/mol_Ni·h for Ni(bchkni)₂/B(C₆F₅)₃ and 2.3 × 10⁵ g_polymer/mol_Pd·h for Pd(bchkni)₂/B(C₆F₅)₃, respectively). Additionally, both catalytic systems showed high activity toward the copolymerization of NB with 1‐octene under various polymerization conditions and produced the addition‐type copolymer with relatively high molecular weights (0.1–1.4 × 10⁵g/mol) as well as narrow molecular weight distribution. The 1‐octene content in the copolymers can be controlled up to 8.9–14.0% for Ni(bchkni)₂/B(C₆F₅)₃ and 8.8–14.6% for Pd(bchkni)₂/B(C₆F₅)₃ catalytic system by varying comonomer feed ratios from 10 to 70 mol %. The reactivity ratios of two monomers were determined to be r_1‐octene = 0.052, r_NB = 8.45 for Ni(bchkni)/B(C₆F₅)₃ system, and r_1‐octene = 0.025, r_NB = 7.17 for Pd(bchkni)/B(C₆F₅)₃ system by the Kelen‐TÜdÕs method. The achieved NB/1‐octene copolymers were confirmed to be noncrystalline and exhibited good thermal stability (T_d > 400°C, T_g = 244.1–272.2°C) and showed good solubility in common organic solvents. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Copolymerization of norbornene and <Emphasis Type="Italic">n</Emphasis>-butyl methacrylate catalyzed by bis-(β-ketoamino)nickel(II)/B(C<Subscript>6</Subscript>F<Subscript>5</Subscript>)<Subscript>3</Subscript> catalytic system

Abstract  

Copolymerization of norbornene with n-butyl methacrylate (n-BMA) was carried out with catalytic systems of bis-(β-ketoamino)nickel(II) complexes Ni{RC(O)CHC[N(naphthyl)]CH₃}₂ (R = CH₃, CF₃) and B(C₆F₅)₃ in toluene and exhibited high activity for both catalytic systems. Influence of the catalyst structure and comonomer feed content on the polymerization activity as well as on the incorporation rates were investigated. The catalysis was proposed to involve the insertion mechanism of norbornene and n-BMA catalyzed by bis-(β-ketoamino)nickel(II)/B(C₆F₅)₃ catalytic systems, and the decreasing polymerization activity with an increasing content of n-BMA in the feedstock composition could be attributed to the competition of carbonyl group coordination onto the Ni(II) active center instead of the olefin double bond. The reactivity ratios were determined to be r _n-BMA = 0.095 and r _norbornene = 12.626 by the Kelen–Tüd?s method. The copolymer films prepared show good transparency in the visible region.     

Metallkomplexe mit biologisch wichtigen Liganden. CXXIII. Darstellung von Isophthaloyl‐ und Terephthaloyl‐di‐[(β,γ,δ)‐amino‐α‐aminocarboxylat]‐verbrückten zweikernigen Ruthenium‐, Rhodium‐ und Iridium‐Halbsandwich‐Komplexen

The reaction of the Cu(II) bis N,O‐chelate‐complexes of L‐2,4‐diaminobutyric acid, L‐ornithine and L‐lysine {Cu[H₂N–CH(COO)(CH₂)_nNH₃]₂}²⁺(Cl^–)₂ (n = 2–4) with terephthaloyl dichloride or isophthaloyl dichloride gives the polymeric complexes {‐OC–C₆H₄–CO–NH–(CH₂)_n–CH(nh₂)(COO)Cu(OOC)(NH₂)CH–CH₂)_n–NH‐}_x 1 – 5 . From these the metal can be removed by precipitation of Cu(II) with H₂S. The liberated ω,ω′‐N,N′‐diterephthaloyl (or iso‐phthaloyl)‐diaminoacids 6 – 10 react with [Ru(cymene)Cl₂]₂, [Ru(C₆Me₆)Cl₂]₂, [Cp*RhCl₂]₂ or [Cp*IrCl₂]₂ to the ligand bridged bis‐amino acidate complexes [L_n(Cl)M–(OOC)(NH₂)CH–(CH₂)_nNH–CO]₂–C₆H₄ 11 – 14 .     

Single‐Pot Ethane Carboxylation Catalyzed by New Oxorhenium(V) Complexes with N,O Ligands

The oxorhenium(V) chelates [ReOCl(N,O‐L)(PPh₃)] [N,O‐L=(OCH₂CH₂)N(CH₂CH₂OH)(CH₂COO) ( 2 ), (OCH₂CH₂)N(CH₂COO)(CH₂COOCH₃) ( 3 )] and [ReOCl₂(N,O‐L)(PPh₃)] [N,O‐L=C₅H₄N(COO‐2) ( 4 ) C₅H₃N(COOCH₃‐2)(COO‐6) ( 5 )] have been prepared by reaction of [ReOCl₃(PPh₃)₂] ( 1 ), in refluxing methanol, with N,N‐bis(2‐hydroxyethyl)glycine [bicine; N(CH₂CH₂OH)₂(CH₂COOH)], N‐(2‐hydroxyethyl)iminodiacetic acid [N(CH₂CH₂OH)(CH₂COOH)₂], picolinic acid [NC₅H₄(COOH‐2)] or 2,6‐pyridinedicarboxylic acid [NC₅H₃(COOH‐2,6)₂], respectively, with ligand esterification in the cases of 3 and 5 . All these complexes have been characterized by IR and multinuclear NMR spectroscopy, FAB⁺‐MS, elemental and X‐ray diffraction structural analyses. They act as catalysts, in a single‐pot process, for the carboxylation of ethane by CO, in the presence of potassium peroxodisulfate K₂S₂O₈, in trifluoroacetic acid (TFA), to give propionic and acetic acids, in a remarkable yield (up to ca. 30%) and under relatively mild conditions, with some advantages over the industrial processes. The picolinate complex 4 provides the most active catalyst and the carboxylation also occurs, although much less efficiently, by the TFA solvent in the absence of CO. The selectivity can be controlled by the ethane and CO pressures, propionic acid being the dominant product for pressures about ca. 7 and 4 atm, respectively (catalyst 4 ), whereas lower pressures lead mainly to acetic acid in lower yields. These reactions constitute an unprecedented use of Re complexes as catalysts in alkane functionalization.     

Efficient synthesis of organic carbonates and poly(1,4‐butylene carbonate‐co‐terephthalate)s

Dimethyl carbonate (DMC) is an environmentally benign chemical currently produced using CO₂. Using the conventional Dean–Stark apparatus, a method was developed for the effective and selective removal of the methanol generated in the transesterification of DMC with alcohol. Using this device, various diols (HO‐A‐OH; A = (CH₂)₄, (CH₂)₂O(CH₂)₂, CH₂C₆H₁₀CH₂, and CH₂C₆H₄CH₂) were converted to mixtures of the corresponding MeOC(O)[O‐A‐OC(O)]OMe and MeOC(O)[O‐A‐OC(O)]₂OMe. Dialkyl carbonates such as dibutyl carbonate, dibenzyl carbonate, and diallyl carbonate were also efficiently prepared from the corresponding alcohols using this device. The compound prepared from 1,4‐butanediol, MeOC(O)[O(CH₂)₄OC(O)]_1.5OMe, was subjected to polycondensation with HO(CH₂)₄[O₂CC₆H₄CO₂(CH₂)₄]_1.5OH or HO(CH₂)₄[O₂CC₆H₄CO₂(CH₂)₄]_1.8OH, which directly was prepared from terephthalic acid and 1,4‐butanediol. The polycondensation afforded high‐molecular‐weight poly(1,4‐butylene carbonate‐co‐terephthalate)s (PBCTs) with M_w of 80–270 kDa and 0.40–0.46 terephthalate mole fractions. PBCTs are attractive materials with potential biodegradability and LDPE‐like thermal properties. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44951.     

Anticancer Potential of (Pentamethylcyclopentadienyl)chloridoiridium(III) Complexes Bearing κP and κP,κS‐Coordinated Ph2PCH2CH2CH2S(O)xPh (x=0–2) Ligands

Iridium(III) complexes of the type [Ir(η⁵‐C₅Me₅)Cl₂{Ph₂PCH₂CH₂CH₂S(O)_xPh‐κP}] (x=0–2; 1 – 3 ) and [Ir(η⁵‐C₅Me₅)Cl{Ph₂PCH₂CH₂CH₂S(O)_xPh‐κP,κS}][PF₆] (x=0–1; 4 and 5 ) with 3‐(diphenylphosphino)propyl phenyl sulfide, sulfoxide, and sulfone ligands Ph₂PCH₂CH₂CH₂S(O)_xPh were designed, synthesized, and characterized fully, including X‐ray diffraction analyses for complexes 3 and 4 . In vitro studies against human thyroid carcinoma (8505C), submandibular carcinoma (A253), breast adenocarcinoma (MCF‐7), colon adenocarcinoma (SW480), and melanoma (518A2) cell lines provided evidence for the high biological potential of the neutral and cationic iridium(III) complexes. Neutral iridium(III) complex 5 proved to be the most active, with IC₅₀ values up to about 0.1 μM , representing activities of up to one order of magnitude higher than cisplatin. Using 8505C cells, apoptosis was shown to be the main mechanism through which complex 5 exerts its tumoricidal action. The described iridium(III) complexes represent potential leads in the search for novel metal‐based anticancer agents.     

Ethylene/1‐octadecene copolymerization using [η5:η1‐C5Me4‐4‐R1‐6‐R‐C6H2O]TiCl2 catalysts

Copolymerization of ethylene with 1‐octadecene was studied using [η⁵:η¹‐C₅Me₄‐4‐R₁‐6‐R‐C₆H₂O]TiCl₂ [R₁ = ^tBu (1), H (2, 3, 4); R = ^tBu (1, 2), Me (3), Ph (4)] as catalysts in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]. The effect of the concentration of comonomer in the feed and Al/Ti molar ratio on the catalytic activity and molecular weight of the resultant copolymer were investigated. The substituents on the phenyl ring of the ligand affect considerably both the catalytic activity and comonomer incorporation. The 1 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system exhibits the highest catalytic activity and produces copolymers with the highest molecular weight, while the 2 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system gives copolymers with the highest comonomer incorporation under similar conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of branched polyethylene by ethylene homopolymerization with a novel (α‐diimine)nickel complex in the presence of methylaluminoxane

Branched polyethylene (PE) was prepared with a novel (α‐diimine)nickel(II) complex of 2,3‐bis(2,6‐dimethylphenyl)‐butanediimine nickel dichloride {[2,6‐(CH₃)₂C₆H₃? N?C(CH₃)C(CH₃)?N? 2,6‐(CH₃)₂C₆H₃]NiCl₂} activated by methylaluminoxane in the presence of a single ethylene monomer. The influences of various polymerization conditions, including the temperature, Al/Ni molar ratio, Ni catalyst concentration, and time, on the catalytic activity, molecular weight, degree of branching, and branch length of PE were investigated. According to gel permeation chromatography, the weight‐average molecular weights of the polymers obtained ranged from 1.7 × 10⁵ to 6.0 × 10⁵, with narrow molecular weight distributions of 2.0–3.5. The degree of branching in the polymers rapidly increased with the polymerization temperature increasing; this led to highly crystalline to totally amorphous polymers, but it was independent of the Al/Ni molar ratio and catalyst concentration. At polymerization temperatures greater than 20°C, the resultant PE was confirmed by ¹³C‐NMR to contain significant amounts of not only methyl but also ethyl, propyl, butyl, amyl, and long branches (longer than six carbons). The formation of the branches could be illustrated by the chain walking mechanism, which controlled their specific spacing and conformational arrangements with one another. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1123–1132, 2002; DOI 10.1002/app.10398     

Expanding the chemistry of single‐ion conducting poly(ionic liquid)s with polyhedral boron anions

The synthesis of a new family of single‐ion conducting random copolymers bearing polyhedral boron anions is reported. For this purpose two novel ionic monomers, namely [B₁₂H₁₁(OCH₂CH₂)₂OC(?O)C(CH₃)?CH₂]^2?[(C₄H₉)₄N⁺]₂ and [8‐(OCH₂CH₂)₂OC(?O)C(CH₃)?CH₂‐3,3′‐Co(1,2‐C₂B₉H₁₀)(1′,2′‐C₂B₉H₁₁)]^?K⁺, having methacrylate function, diethylene glycol bridge and closo‐dodecaborate or cobalt bis(1,2‐dicarbollide) anions were designed. Such monomers differ from previously reported ones by (i) chemically attached highly delocalized boron anions, by (ii) valency of the anion (divalent anion and monovalent one) and by (iii) the presence of oxyethylene flexible spacer between the methacrylate group and bonded anion. Their free radical copolymerization with poly(ethylene glycol) methyl ether methacrylate and subsequent ion exchange provided lithium‐ion conducting polyelectrolytes showing low glass transition temperature (?53 to ?49 °C), ionic conductivity up to 9.1 × 10^?7 S cm^?1, lithium transference number up to 0.61 (70 °C) and electrochemical stability up to 4.1 V versus Li⁺/Li (70 °C). The incorporation of propylene carbonate (20–40 wt%) into the copolymers resulted in the enhancement of their ionic conductivity by one order of magnitude and significantly increased their electrochemical stability up to 4.7 V versus Li⁺/Li (70 °C). © 2019 Society of Chemical Industry     

Structural investigations of (9‐ethyl‐carbazol‐6‐yl) methyl methacrylate/methyl acrylate copolymers using two‐dimensional NMR spectroscopy

(9‐Ethyl‐carbazol‐6‐yl) methyl methacrylate/methyl acrylate (E/A) copolymers of different compositions were prepared by solution polymerization by varying the molar infeed ratio, using AIBN as initiator at 60°C. The reactivity ratios calculated by Kelen–Tudos (KT) method were found to be r_E = 1.16 ± 0.02 and r_A = 0.69 ± 0.01 whereas those calculated from RREVM method were found to be r_E = 1.18 and r_A = 0.68. The molecular weights (M_w) and polydispersity index (PDI, M_w/M_n) were determined using gel permeation chromatography (GPC). Glass transition temperatures (T_g) for different compositions of E/A copolymers were determined using differential scanning calorimetry (DSC). Copolymer molar outfeed ratio (F_E) was calculated from ¹H NMR spectra. The α‐methyl, methine, backbone methylene, and quaternary carbon resonance signals of the copolymers were distinguished using ¹³C{¹H}, DEPT‐45, ‐90, and ‐135 NMR techniques. The α‐methyl and β‐methylene showed compositional and configurational sensitivity up to pentad and tetrad level, respectively, whereas methine showed only compositional sensitivity up to pentad level. Unambiguous assignments for ¹H and ¹³C{¹H} NMR spectra were done by correlating 1D (¹H, ¹³C{¹H}, DEPT) and 2D (HSQC, TOCSY) NMR data. The spectral assignments for carbonyl region were done by studying higher bond order couplings by heteronuclear multibond correlation (HMBC) spectra. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5595–5606, 2006     

Amphiphilic diblock copolymers poly(2‐hydroxyethylmethacrylate)‐b‐(N‐phenylmaleimide) and poly(2‐hydroxyethylmethacrylate)‐b‐(styrene) using the macroinitiator poly(HEMA)‐Cl by ATRP: Preparation,characterization, and thermal properties

In recent years, much attention has been given to the development of specialty polymers from useful materials. In this context, amphiphilic block copolymers were prepared by atom transfer radical polymerization (ATRP) of N‐phenylmaleimide (N‐PhMI) or styrene using a poly(2‐hydroxyethylmethacrylate)‐Cl macroinitiator/CuBr/bipyridine initiating system. The macroinitiator P(HEMA)‐Cl was directly prepared in toluene by reverse ATRP using BPO/FeCl₃ 6 H₂O/PPh₃ as initiating system. The microstructure of the block copolymers were characterized using FTIR, ¹H‐NMR, ¹³C‐NMR spectroscopic techniques and scanning electron microscopy (SEM). The thermal behavior was studied by differential scanning calorimetry (DSC), and thermogravimetry (TG). The theoretical number average molecular weight (M_n,th) was calculated from the feed capacity. The microphotographs of the film's surfaces show that the film's top surfaces were generally smooth. The TDT of the block copolymer P(HEMA)₈₀‐b‐P(N‐PhMI)₂₀ and P(HEMA)₉₀‐b‐P(St)₁₀ of about 290°C was also lower than that found for the macroi′nitiator poly(HEMA)‐Cl. The block copolymers exhibited only one T_g before thermal decomposition, which could be attributed to the low molar content of the N‐PhMI or St blocks respectively. This result also indicates that the phase behavior of the copolymers is predominately determined by the HEMA block. The curves reveal that the polymers show phase transition behavior of amorphous polymers. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of electrorheological active ionomers from poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine)

In this study, synthesis, characterization, partial hydrolysis, and salt formation of poly(2‐hydroxyethyl methacrylate)‐co‐poly(4‐vinyl pyridine), (poly(HEMA)‐co‐poly‐(4‐VP)) copolymers were investigated. The copolymers were synthesized by free radical polymerization using K₂S₂O₈ as an initiator. By varying the monomer/initiator ratio, chain lengths of the copolymers were changed. The copolymers were characterized by gel permeation chromatography (GPC), viscosity measurements, ¹H and ¹³C NMR and FTIR spectroscopies, elemental analysis, and end group analysis methods. The copolymers were partially hydrolyzed by p‐toluene sulfonic acid monohydrate (PTSA·H₂O) and washed with LiOH_(aq) solution to prepare electrorheological (ER) active ionomers, poly(Li‐HEMA)‐co‐poly(4‐VP). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3540–3548, 2006     

Synthesis of poly(methylphenylsiloxane) rich in syndiotacticity by Rh‐catalysed stereoselective cross‐dehydrocoupling polymerization of optically active 1,3‐dimethyl‐1,3‐diphenyldisiloxane derivatives

Cross‐dehydrocoupling reactions of (R)‐methyl(1‐naphthyl)phenylsilane (>99%ee) with (S)‐methyl(1‐naphthyl)phenylsilanol (>99% ee) proceeded with 82–99% retention of configuration of chiral silicon centres in the presence of various Rh‐catalysts. Cross‐dehydrocoupling polymerization of 1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane gave poly(methylphenylsiloxane) of moderate molecular weight in toluene at 60 °C in the presence of [RhCl(cod)]₂ (5.0 mol%) and triethylamine (1.0 equivalent). Assignment of the triad signals of the resulting polymer was made by ¹H NMR spectroscopy of the methyl proton (I = 0.04, H = 0.09 and S = 0.14 ppm) and ¹³C NMR spectroscopy of the ipso carbon of the phenyl group (S = 136.7, H = 136.9, and I = 137.1 ppm). Although the reaction of optically pure (S,S)‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane [(S,S):(S,R):(R,R)] = 84:16:0] gave a poly(methylphenylsiloxane) of rather low molecular weight, its triad tacticity was found to be rich in syndiotacticity (S:H:I = 60:32:8) by ¹³C NMR spectroscopy. © 2001 Society of Chemical Industry     

Organosoluble and light‐colored fluorinated polyimides based on 1,1‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐1‐phenylethane and various aromatic dianhydrides

To investigate the CF₃ group affecting the coloration and solubility of polyimides (PI), a novel fluorinated diamine 1,1‐bis[4‐(4‐amino‐2‐ trifluoromethylphenoxy)phenyl]‐1‐phenylethane (2) was prepared from 1,1‐ bis(4‐hydrophenyl)‐1‐phenylethan and 2‐chloro‐5‐nitrobenzotrifluoride. A series of light‐colored and soluble PI 5 were synthesized from 2 and various aromatic dianhydrides 3a–f using a standard two‐stage process with thermal 5a– f(H) and chemical 5a–f(C) imidization of poly(amic acid). The 5 series had inherent viscosities ranging from 0.55 to 0.98 dL/g. Most of 5a–f(H) were soluble in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐ dimethylacetamide (DMAc), and N,N‐dimethylformamide (DMF), and even soluble in less polar solvents, such as m‐Cresol, Py, Dioxane, THF, and CH₂Cl₂, and the 5(C) series was soluble in all solvents. The GPC data of the 5a–f(C) indicated that the Mn and Mw values were in the range of 5.5–8.7 × 10⁴ and 8.5–10.6 × 10⁴, respectively, and the polydispersity index (PDI) Mw /Mn values were 1.2–1.5. The PI 5 series had excellent mechanical properties. The glass transition temperatures of the 5 series were in the range of 232–276°C, and the 10% weight loss temperatures were at 505–548 °C in nitrogen and 508–532 °C in air, respectively. They left more than 56% char yield at 800°C in nitrogen. These films had cutoff wavelengths between 356.5–411.5 nm, the b* values ranged from 5.0–71.1, the dielectric constants, were 3.11–3.43 (1MHz) and the moisture absorptions were in the range of 011–0.40%. Comparing 5 containing the analogous PI 6 series based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐ phenylethane (BAPPE), the 5 series with the CF₃ group showed lower color intensity, dielectric constants, and better solubility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2399–2412, 2005     

Microstructure analysis of N‐vinyl‐2‐pyrrolidone/vinyl acetate copolymers by NMR spectroscopy

N‐Vinyl‐2‐pyrrolidone (V) and vinyl acetate (A) copolymers of different compositions were synthesized by free radical bulk polymerization. The copolymer composition of these copolymers was determined using quantitative ¹³C{¹H} NMR spectra. The reactivity ratios for these comonomers were determined using the Kelen–Tudos (KT) and non‐linear least‐square error‐in‐variable (EVM) methods. The reactivity ratios calculated from the KT and EVM methods are r_V = 2.86 ± 0.16, r_A = 0.36 ± 0.09 and r_V = 2.56, r_A = 0.33, respectively. ¹H, ¹³C{¹H} and ¹H–¹³C heteronuclear shift correlation spectroscopy (HSQC) and ¹H–¹H homonuclear total correlation spectroscopy (TOCSY) were used for the compositional and configurational assignments of V/A copolymers. The ¹³C distortionless enhancement by polarization transfer (DEPT) technique was used to resolve the methine, methylene and methyl resonance signals in the V/A copolymers. © 2002 Society of Chemical Industry