Asymmetric 1,3‐Dipolar Cycloaddition Reaction between α,β‐Unsaturated Aldehydes and Nitrones Catalyzed by Well‐Defined Iridium or Rhodium Catalysts

Reaction of the complexes (S_M,R_C)‐[(η⁵‐C₅Me₅)M{(R)‐Prophos}(H₂O)](SbF₆)₂ (M=Rh, Ir) with α,β‐unsaturated aldehydes diastereoselectively gave complexes (S_M,R_C)‐[(η⁵‐C₅Me₅)M{(R)‐Prophos}(enal)](SbF₆)₂ which have been fully characterized, including an X‐ray molecular structure determination of the complex (S_Rh,R_C)‐[(η⁵‐C₅Me₅)Rh{(R)‐Prophos}(trans‐2‐methyl‐2‐pentenal)](SbF₆)₂. These enal complexes efficiently catalyze the enantioselective 1,3‐dipolar cycloaddition of the nitrones N‐benzylideneaniline N‐oxide and 3,4‐dihydroisoquinoline N‐oxide to the corresponding enals. Reactions occur with excellent regioselectivity, perfect endo selectivity and with enantiomeric excesses up to 94 %. The absolute configuration of the adduct 5‐methyl‐2,3‐diphenylisoxazolidine‐4‐carboxaldehyde was determined through its (R)‐(−)‐α‐methylbenzylamine derivative.     

Ethylene/1‐octadecene copolymerization using [η5:η1‐C5Me4‐4‐R1‐6‐R‐C6H2O]TiCl2 catalysts

Copolymerization of ethylene with 1‐octadecene was studied using [η⁵:η¹‐C₅Me₄‐4‐R₁‐6‐R‐C₆H₂O]TiCl₂ [R₁ = ^tBu (1), H (2, 3, 4); R = ^tBu (1, 2), Me (3), Ph (4)] as catalysts in the presence of Al(i‐Bu)₃ and [Ph₃C][B(C₆F₅)₄]. The effect of the concentration of comonomer in the feed and Al/Ti molar ratio on the catalytic activity and molecular weight of the resultant copolymer were investigated. The substituents on the phenyl ring of the ligand affect considerably both the catalytic activity and comonomer incorporation. The 1 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system exhibits the highest catalytic activity and produces copolymers with the highest molecular weight, while the 2 /Al(i‐Bu)₃/[Ph₃C][B(C₆F₅)₄] catalyst system gives copolymers with the highest comonomer incorporation under similar conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Ethylene/α‐olefin copolymerization by nonbridged (cyclopentadienyl)(aryloxy)titanium(IV) dichloride/AliBu3/Ph3CB(C6F5)4 catalyst systems

A series of nonbridged (cyclopentadienyl) (aryloxy)titanium(IV) complexes of the type, (η⁵‐Cp′)(OAr)TiCl₂ [OAr = O‐2,4,6‐^tBu₃C₆H₂ and Cp′ = Me₅C₅ ( 1 ), Me₄PhC₅ ( 2 ), and 1,2‐Ph₂‐4‐MeC₅H₂ ( 3 )], were prepared and used for the copolymerization of ethylene with α‐olefins (e.g., 1‐hexene, 1‐octene, and 1‐octadecene) in presence of AlⁱBu₃ and Ph₃CB(C₆F₅)₄ (TIBA/B). The effect of the catalyst structure, comonomer, and reaction conditions on the catalytic activity, comonomer incorporation, and molecular weight of the produced copolymers was examined. The substituents on the cyclopentadienyl group of the ligand in 1 – 3 play an important role in the catalytic activity and comonomer incorporation. The 1 /TIBA/B catalyst system exhibits the highest catalytic activity, while the 3 /TIBA/B catalyst system yields copolymers with the highest comonomer incorporation under the same conditions. The reactivity ratio product values are smaller than those by ordinary metallocene type, which indicates that the copolymerization of ethylene with 1‐hexene, 1‐octene, and 1‐octadecene by the 1–3/ TIBA/B catalyst systems does not proceed in a random manner. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and crystal structure of the singly tucked-in derivative of bis(phenyltetramethylcyclopentadienyl)titanium

Thermolysis of [TiMe₂(η⁵-C₅Me₄Ph)₂] (4) at 145 °C for 5 h afforded the singly tucked-in paramagnetic titanocene [Ti(III)(η⁵-C₅Me₄Ph){η⁵:η¹-C₅Me₃Ph(CH₂)}] (9). In distinction to the singly tucked-in permethyltitanocene [Ti(III)(η⁵-C₅Me₅){η⁵:η¹-C₅Me₄(CH₂)}] (1) which was found crystallographically disordered [J.M. Fischer, W.E. Piers, V.G. Young, Jr., Organometallics 15 (1996) 2410] the single crystal X-ray diffraction analysis of 9 afforded molecular parameters with nearly by one order better precision as measured by esd-values.     

Mechanistic in situ High‐Pressure NMR Studies of Benzene Hydrogenation by Supramolecular Cluster Catalysis with [(η6‐C6H6)(η6‐C6Me6)2Ru3(μ3‐O)(μ2‐OH)(μ2‐H)2][BF4]

In situ high‐pressure NMR spectroscopy of the hydrogenation of benzene to give cyclohexane, catalysed by the cluster cation [(η⁶‐C₆H₆) (η⁶‐C₆Me₆)₂Ru₃(μ₃‐O)(μ₂‐OH)(μ₂‐H)₂]⁺ 2 , supports a mechanism involving a supramolecular host‐guest complex of the substrate molecule in the hydrophobic pocket of the intact cluster molecule.     

Synthesis,crystal structure and protonation of the asymmetric iron-only hydrogenase model [Fe2(CO)3(μ-pdt){μ,η2-Ph2PCH2CH2P(Ph)CH2CH2PPh2}] (pdt = SCH2CH2CH2S)

Heating [Fe₂(CO)₆(μ-pdt)] (pdt = SCH₂CH₂CH₂S) and bis(2-diphenylphosphinoethyl) phenylphosphine (triphos) in toluene gives [Fe₂(CO)₃(μ-pdt){μ,η²-Ph₂PCH₂CH₂P(Ph)CH₂CH₂PPh₂}], the major form of which has been characterised crystallographically. The complex is highly asymmetric; while one iron centre has the expected square-based pyramidal coordination environment, the second is nearer a trigonal bipyramid. In solution at room temperature, four isomers of the major form interconvert via two processes which can be frozen out at low temperature, while protonation affords a bridging hydride complex which appears to be static at all temperatures.     

Low-Pressure Carbonylation of Benzyl Bromide with Palladium Complexes Modified with PNS (PNS = Ph2PCH2CH2C(O)NHC(CH3)2CH2SO3Li) or P(OPh)3. Structural Identification of Palladium-Catalyst Intermediate

The catalytic activities of two palladium complexes with water soluble phosphine PNS (PNS = Ph₂PCH₂CH₂C(O)NHC(CH₃)₂CH₂SO₃Li) (I) and phosphite P(OPh)₃ (II) were tested in the carbonylation of benzyl bromide in methanol at 40–50°C and 1 atm of CO. The first catalyst, (I), was formed in situ from PdCl₂(cod) and PNS, the second one, (II), was based on the PdCl₂(P(OPh)₃)₂ complex. At the ratio of [NEt₃]:[PhCH₂Br] equal to 2.5 the yields of phenylacetic acid methyl ester were 83–86% in the carbonylation with PNS and 100% in the carbonylation with P(OPh)₃. The palladium catalyst with P(OPh)₃ produced under the same conditions 70% of phenylacetic acid methyl ester in the carbonylation of benzyl chloride and 60% of 2-methylphenylacetic acid methyl ester in the carbonylation of 1-bromoethylbenzene. The lower rate of carbonylation of 1-bromoethylbenzyl bromide in comparison to that of benzyl bromide was explained by the lower rate of the substrate oxidative addition step leading to palladium benzyl complexes. Two palladium benzyl complexes, cis-PdBr(PhCH₂)(P(OPh)₃)₂ and trans-PdBr(PhCH(Me))(P(OPh)₃)₂ have been isolated and characterized (X-ray, ³¹P and ¹H NMR).     

Preparation and Bioactivity of Iridium(III) Phenanthroline Complexes with Halide Ions and Pyridine Leaving Groups

A series of half-sandwich structural iridium(III) phenanthroline (Phen) complexes with halide ions (Cl⁻, Br⁻, I⁻) and pyridine leaving groups ([(η⁵-Cp^X)Ir(Phen)Z](PF₆)_n, Cp^x: electron-rich cyclopentadienyl group, Z: leaving group) have been prepared. Target complexes, especially the Cp^xbiph (biphenyl-substituted cyclopentadienyl)-based one, showed favourable anticancer activity against human lung cancer (A549) cells; the best one ( Ir8 ) was almost five times that of cisplatin under the same conditions. Compared with complexes involving halide ion leaving groups, the pyridine-based one did not display hydrolysis but effectively caused lysosomal damage, leading to accumulation in the cytosol, inducing an increase in the level of intracellular reactive oxygen species and apoptosis; this indicated an anticancer mechanism of oxidation. Additionally, these complexes could bind to serum albumin through a static quenching mechanism. The data highlight the potential value of half-sandwich iridium(III) phenanthroline complexes as anticancer drugs.     

Facile,Efficient Copolymerization of Ethylene with Bicyclic,Non‐Conjugated Dienes by Titanium Complexes Bearing Bis(β‐Enaminoketonato) Ligands

Copolymerizations of ethylene with 5‐vinyl‐2‐norbornene or 5‐ethylidene‐2‐norbornene under the action of various titanium complexes bearing bis(β‐enaminoketonato) chelate ligands of the type, [R¹NC(R²)CHC(R³)O]₂TiCl₂ ( 1 , R¹=Ph, R²=CF₃, R³=Ph; 2 , R¹=C₆H₄F‐p, R²=CF₃, R³=Ph; 3 , R¹=Ph, R²=CF₃, R³=t‐Bu; 4 , R¹=C₆H₄F‐p, R²=CF₃, R³=t‐Bu; 5 , R¹=Ph, R²=CH₃, R³=CF₃; 6 , R¹=C₆H₄F‐p, R²=CH₃, R³=CF₃), have been shown to occur with the regioselective insertion of the endocyclic double bond of the monomer into the copolymer chain, leaving the exocyclic vinyl double bond as a pendant unsaturation. The ligand modification strongly affects the copolymerization behaviour. High catalytic activities and efficient co‐monomer incorporation can be easily obtained by optimizing the catalyst structures and polymerization conditions.     

Extraction of iridium(III) by ion-pair formation with 2-octylaminopyridine in weak organic acid media

To extract iridium(III), various physicochemical parameters were studied. 2-Octylaminopyridine was used for the extraction of iridium(III) from acetate medium at 8.5 pH. Quantitative extraction of iridium(III) was achieved via ion-pair formation of cation [2-OAPH⁺] and anion [Ir(CH₃COO)₄]^?. The stripping of iridium(III)-laden organic phase was carried out 2 M HCl (3 × 10 mL) . The stoichiometry of the extracted ion–pair complex was found to be 1:4:1 (metal: acetate: extractant). The extracted species [2-OAPH⁺. Ir(CH₃COO)₄^?] is assumed to be an ion association product of [Ir(CH₃COO)₄] ^? and [2-OAPH]⁺. The proposed method was successfully used in the separation of iridium(III) from binary and ternary mixtures. Analysis of various alloy samples was also carried out.     

Extraction Properties of P(O)-Modified N-Aryl-Carbamoylmethylphosphine Oxides in Nitric Acid Media

Novel polyfunctional neutral organophosphorus compounds, P(O)-modified N-aryl- carbamoylmethylphosphine oxides, Ph₂P(O)CH₂C(O)NH-(o-C₆H₄)(CH₂)_n-P(O)Ph₂ and Ph₂P(O)CH₂C(O)NH-(m-C₆H₄)(CH₂)_n-P(O)Ph₂ (n = 1,2), were synthesized and studied as extractants for U(VI), Th(IV) and Ln(III) from HNO₃ solutions. The influence of aqueous and organic phases on the extraction efficiency was elucidated and stoichiometry of the complexes extracted was determined. Introduction of an additional phosphoryl group into the phenyl substitutent at the nitrogen atom of diphenyl(N-phenylcarbamoylmethyl)phosphine oxide resulted in an increase of the efficiency of U(VI), Th(IV), Ln(III), and Re(VII) extraction.     

Polyethylene‐block‐poly(ε‐caprolactone) diblock copolymers: synthesis and compatibility

A strategy is introduced for the synthesis of polyethylene‐block‐poly(ε‐caprolactone) block copolymers by a combination of coordination polymerization and ring‐opening polymerization. First, end‐hydroxylated polyethylene (PE‐OH) was prepared with a one‐step process through ethylene/3‐buten‐1‐ol copolymerization catalyzed by a vanadium(III) complex bearing a bidentate [N,O] ligand ([PhN?C(CH₃)CHC(Ph)O]VCl₂(THF)₂). The PE‐OH was then used as macroinitiator for ring‐opening polymerization of ε‐caprolactone, leading to the desired nonpolar/polar diblock copolymers. The block structure was confirmed by spectral analysis using ¹H NMR, gel permeation chromatography and differential scanning calorimetry. The unusual topologies of the model copolymers will establish a fundamental understanding for structure–property correlations, e.g. compatibilization, of polymer blends and surface and interface modification of other polymers. © 2014 Society of Chemical Industry     

A convenient one-step synthesis of alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III)

Alkenyl-phosphonio complexes of ruthenium(II), rhodium(III) and iridium(III) were prepared by reactions of [(p-cymene)RuCl₂(PPh₃)] or [C_p^*MCl₂(PPh₃)] (M=Rh, Ir; C_p^*=C₅Me₅) with 1-ethynylbenzene and triphenylphosphine in the presence of KPF₆.     

Notable Effects of Aluminum Alkyls and Solvents for Highly Efficient Ethylene (Co)polymerizations Catalyzed by (Arylimido)‐ (aryloxo)vanadium Complexes

The effects of both Al cocatalyst and solvent on catalytic activity in the ethylene polymerization by the (arylmido)(aryloxo)vanadium(V) complex, VCl₂(N‐2,6‐Me₂C₆H₃)(O‐2,6‐Me₂C₆H₃) ( 1 ), have been explored in detail. The activity of 5.84×10⁵ kg PE/mol V⋅h (TOF 2.08×10⁷ h⁻¹) has been achieved by 1 /EtAlCl₂ catalyst in CH₂Cl₂ at 0 °C, and the activity in toluene increased in the order: i‐Bu₂AlCl>EtAlCl₂>Me₂AlCl>Et₂AlCl> Et₂Al(OEt), AlEt₃, AlMe₃ (negligible activities). Both aluminum alkyl cocatalyst and solvent also affected the catalytic activity and the norbornene (NBE) incorporation in the ethylene/NBE copolymerization using complex 1 , whereas the NBE contents were not strongly affected by the kind of aryl oxide ligand in VCl₂(N‐2,6‐Me₂C₆H₃)(OAr) [OAr=O‐2,6‐Me₂C₆H₃ ( 1 ), O‐2,6‐i‐Pr₂C₆H₃ ( 2 ), O‐2,6‐Ph₂C₆H₃ ( 3 )].     

Metallkomplexe mit biologisch wichtigen Liganden. CXXIII. Darstellung von Isophthaloyl‐ und Terephthaloyl‐di‐[(β,γ,δ)‐amino‐α‐aminocarboxylat]‐verbrückten zweikernigen Ruthenium‐, Rhodium‐ und Iridium‐Halbsandwich‐Komplexen

The reaction of the Cu(II) bis N,O‐chelate‐complexes of L‐2,4‐diaminobutyric acid, L‐ornithine and L‐lysine {Cu[H₂N–CH(COO)(CH₂)_nNH₃]₂}²⁺(Cl^–)₂ (n = 2–4) with terephthaloyl dichloride or isophthaloyl dichloride gives the polymeric complexes {‐OC–C₆H₄–CO–NH–(CH₂)_n–CH(nh₂)(COO)Cu(OOC)(NH₂)CH–CH₂)_n–NH‐}_x 1 – 5 . From these the metal can be removed by precipitation of Cu(II) with H₂S. The liberated ω,ω′‐N,N′‐diterephthaloyl (or iso‐phthaloyl)‐diaminoacids 6 – 10 react with [Ru(cymene)Cl₂]₂, [Ru(C₆Me₆)Cl₂]₂, [Cp*RhCl₂]₂ or [Cp*IrCl₂]₂ to the ligand bridged bis‐amino acidate complexes [L_n(Cl)M–(OOC)(NH₂)CH–(CH₂)_nNH–CO]₂–C₆H₄ 11 – 14 .     

Alkyne Metatheses in Transition Metal Coordination Spheres: Convenient Tungsten‐ and Molybdenum‐Catalyzed Syntheses of Novel Metallamacrocycles

Reactions of (CO)₅Re(Br), (η⁵‐C₅H₅)Ru(Cl)(PPh₃)₂, and [Pt(μ‐Cl)(C₆F₅)(S(CH₂CH₂‐)₂)]₂ with the alkyne‐containing phosphine Ph₂P(CH₂)₆C≡CCH₃ give the bis(phosphine) complexes fac‐(CO)₃Re(Br)(Ph₂P(CH₂)₆C≡CCH₃)₂ ( 5 ), (η⁵‐C₅H₅)Ru(Cl)(Ph₂P(CH₂)₆C≡CCH₃)₂ ( 6 ), and trans‐(Cl)(C₆F₅)Pt(Ph₂P(CH₂)₆C≡CCH₃)₂ ( 7 ). Alkyne metatheses with the catalyst (t‐BuO)₃W(≡C‐t‐Bu) (10–15 mol %, chlorobenzene, 80 °C) give the seventeen‐membered metallamacrocycles fac‐(CO)₃Re(Br)(Ph₂P(CH₂)₆CC(CH₂)₆P Ph₂) ( 8 ), (η⁵‐C₅H₅)Ru(Cl)(Ph₂P(CH₂)₆CC(CH₂)₆P Ph₂) ( 9 ), and trans‐(Cl)(C₆F₅)Pt(PPh₂(CH₂)₆CC(CH₂)₆P Ph₂) ( 10 ). ³¹P NMR analyses show 90–75% conversions to 8 – 10 (59–47% isolated after chromatography). The identity of 8 was confirmed by a crystal structure, and 10 was hydrogenated over Pd/C to fac‐(CO)₃Re(Br)(Ph₂P(CH₂)₆CC(CH₂)₆P Ph₂) ( 12 , 87%), which was crystallographically characterized earlier. A catalyst derived from Mo(CO)₆/4‐chlorophenol effects a slower conversion of 7 to 10 at 140 °C. In the case of 5 , a mer, trans isomer of 8 is isolated ( 11 , 44%), as established by NMR and IR data. In 10 – 12 , the diphosphines span trans positions. These results, together with previous examples involving group VIII metallocenes, establish the wide viability of the title reaction.     

Chiral Bioinspired Non‐Heme Iron Complexes for Enantioselective Epoxidation of α,β‐Unsaturated Ketones

Chiral bioinspired iron complexes of N₄ ligands based on the ethylenediamine backbone display remarkable levels of enantioselectivity for the first time in the asymmetric epoxidation of α,β‐unsaturated ketones using hydrogen peroxide (up to 87% ee) or peracetic acid as oxidant, respectively. Notablely, isotopic labeling with H₂¹⁸O strongly demonstrated that there is a reversible water binding step prior to generation of the significant intermediate. Besides, the complex [L₂Fe(III)₂(μ‐O)(μ‐CH₃CO₂)]³⁺ usually derived from the decay of the LFe(IV)O species or thermodynamic sinks for a number of iron complexes was identified by HR‐MS. In addition, the possible mechanisms were proposed and LFe(V)O species may be the main active intermediate in the catalytic system.     

Room Temperature Palladium‐Catalyzed Decarboxylative Acyl/Aroylation using [Fe(III)(EDTA)(η2‐O2)]3− as Oxidant at Biological pH

The purple‐coloured iron peroxo complex [Fe(III)EDTA(η²‐O₂)]³⁻ as a novel reagent system for Pd‐catalyzed decarboxylative ortho‐acylation of acetanilides with α‐oxocarboxylic acids at room temperature in aqueous media has been realized. This reaction provides an effective access to ortho‐acylacetanilides under mild conditions.     

Vinyl‐addition copolymerization of norbornene and polar norbornene derivatives using novel bis(β‐ketoamino)Ni(II)/B(C6F5)3/AlEt3 catalytic systems

Copolymerization of norbornene (NBE) and polar norbornene derivatives undergoes vinyl polymerization by using novel catalyst systems formed in situ by combining bis(β‐ketoamino)Ni(II) complexes {Ni[R₁C(O)CHC(NR₃)R₂]₂ (R_l = R₂ = CH₃, R₃ = naphthyl, 1 ; R₁ = R₂ = CH₃, R₃ = C₆H₅, 2 ; R₁ = C₆H₅, R₂ = CH₃, R₃ = naphthyl, 3 ; R_l = R₂ = CH₃, R₃ = 2, 6‐(CH₃)₂C₆H₃, 4 ; R₁ = R₂ = CH₃, R₃ = 2, 6‐′Pr₂C₆H₃ 5 ; R₁ = C₆H₅, R₂ = CH₃, R₃ = 2, 6‐′Pr₂C₆H₃, 6 )} and B(C₆F₅)₃/AlEt₃ in toluene. The 1 /B(C₆F₅)₃/AlEt₃ catalytic system is effective for copolymerization of NBE with NBE OCOCH₃ and NBE CH₂OH, respectively, and copolymerization activity is followed in the order of NBE CH₂OH > NBE OCOCH₃ > NBE CN. The molecular weights of the obtained poly(NBE/NBE CH₂OH) reached 5.97 × 10⁴ to 2.07 × 10⁵ g/mol and the NBE CH₂OH incorporation ratios reached 7.0–55.4 mol % by adjusting the comonomer feedstock composition. The copolymerization of NBE and NBE CH₂OH also depend on catalyst structures and activity of catalyst followed in the order of 2 > 1 > 3 > 5 > 4 > 6 . The molecular weights and NBE CH₂OH incorporation ratios of poly(NBE/NBE CH₂OH) were adjustable to be 1.91–5.37 × 10⁵ g/mol and 9.5–41.1 mol %  OH units by using catalysts 1 – 6 . The achieved copolymers were confirmed to be vinyl‐addition type, noncrystalline and have good thermal stability (T_d = 380–410°C). © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Nickel(II) complexes bearing the bis(β‐ketoamino) ligand for the copolymerization of norbornene with a higher 1‐alkene

A novel bis(β‐ketoamino)Ni(II) complex catalyst, Ni{CF₃C(O)CHC[N(naphthyl)]CH₃}₂, was synthesized, and the structure was solved by a single‐crystal X‐ray refraction technique. The copolymerization of norbornene with higher 1‐alkene was carried out in toluene with catalytic systems based on nickel(II) complexes, Ni{RC(O)CHC[N(naphthyl)]CH₃}₂(R?CH₃, CF₃) and B(C₆F₅)₃, and high activity was exhibited by both catalytic systems. The effects of the catalyst structure and comonomer feed content on the polymerization activity and the incorporation rates were investigated. The reactivity ratios were determined to be r_1‐octene = 0.009 and r_norbornene = 13.461 by the Kelen–Tüdõs method for the Ni{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of ¹H‐NMR and ¹³C‐NMR. The thermogravimetric analysis results showed that the copolymers exhibited good thermal stability (decomposition temperature, T_dec > 400°C), and the glass‐transition temperature of the copolymers were observed between 215 and 275°C. The copolymers were confirmed to be noncrystalline by wide‐angle X‐ray diffraction analysis and showed good solubility in common organic solvents. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012