Construction of an Escherichia coli-Clostridium perfringens shuttle vector and plasmid transformation of Clostridium perfringens.

A stable shuttle vector which replicates in Escherichia coli and Clostridium perfringens was constructed by ligating a 3.6-kilobase (kb) fragment of plasmid pBR322 with C. perfringens plasmid pHB101 (3.1 kb). The marker for this shuttle plasmid originated from the 1.3-kb chloramphenicol resistance gene of plasmid pHR106. The resulting shuttle vector, designated pAK201, is 8 kb in size and codes for resistance to 20 micrograms of chloramphenicol per ml in both E. coli and C. perfringens. Following shuttle vector construction in E. coli, plasmid pAK201 was transformed into E. coli HB101 and C. perfringens ATCC 3624A, using intact cell electroporation. The transformation frequencies were 10(6) and 10(4) transformants per microgram of DNA in E. coli and C. perfringens, respectively. Restriction enzyme analysis of the chimera isolated from transformants of both microorganisms suggested that the plasmids were identical. Reciprocal transformation experiments in E. coli and C. perfringens indicated no difference in transformation frequency. Plasmid pAK201 was stable in C. perfringens following repeated transfer in the absence of chloramphenicol pressure. The restriction map of plasmid pAK201 shows six unique cut sites which should be useful for future genetic analysis and C. perfringens gene library construction.     

Development of a new shuttle plasmid system for Escherichia coli and Clostridium perfringens.

We constructed a 7.9-kilobase-pair recombinant shuttle plasmid, designated pHR106, by combining desired segments of three plasmids: an Escherichia coli plasmid (pSL100) which provides a multiple cloning site, a Clostridium perfringens plasmid (pJU122) which provides a clostridial origin of replication, and an E. coli plasmid (pJIR62) which provides an E. coli origin of replication, an ampicillin resistance gene, and a chloramphenicol resistance gene of clostridial origin. The shuttle plasmid transformed E. coli HB101 with a frequency of 1 transformant per 10(4) viable cells and C. perfringens L-phase strain L-13 with a frequency of approximately 1 transformant per 10(6) viable cells. Because of the set of unique cloning sites and the chloramphenicol resistance marker, this shuttle plasmid should be particularly useful for studies of gene regulation and for enzyme production with C. perfringens.     

Factors involved in the transformation of previously non-transformable Clostridium perfringens type B

Abstract The pre-shock incubation of cells plus DNA and the methylation state of plasmid DNA were found to play a role in the electroporation-based transformation of Clostridium perfringens 3626B. Following pre-shock incubation, the highest number of C. perfringens 3626B transformants was obtained when plasmid pGK201 was both dam⁺ dcm⁺ modified, while no transformants were obtained when pGK201 was not methylated or only dcm methylated. This is consistent with the observation that plasmid pGK201 was protected against digestion by C. perfringens 3626B cell-associated nucleases for up to 3 min when methylated by both methylases. C. perfringens 3626B was successfully transformed only within a narrow cell recovery rate window. The erm AM gene associated with pGK201 and pAK102 was found to integrate into the chromosome of C. perfringens strains 13A and 3626B.     

Factors involved in the electroporation-induced transformation of Clostridium perfringens

The following factors were found to improve the efficiency of transformation of Clostridium perfringens 3624A Rifr Strr: (1) a reduction in cuvette sample volume (DNA and cell suspension) to 0.8 ml, (2) use of a 1 microgram/ml concentration of transforming DNA, (3) use of late-logarithmic phase cells, (4) 3-fold concentration of cell density (3.0 x 10(8) CFU/ml), and (5) a reduction in the pH of the expression and selective plating medium to 6.4. Application of the improved conditions resulted in transformation efficiencies for C. perfringens 3624A Rifr Strr ranging from 7.1 transformants/microgram DNA for plasmic pIP401 to 9.2 x 10(4) transformants per microgram DNA for plasmid pAK201. The greatest transformation efficiency obtained using pAK201 was 9.8 x 10(6) transformants/micrograms DNA for C. perfringens strain 13. Using the improved protocol, pAM beta 1 was transformed at a 42-fold greater level when compared with the values reported earlier [1]. In addition to C. perfringens 3624A Rifr Strr, strains 13, 10543A, 3628C, NTG-4, and 3624A were successfully transformed. Nuclease does not appear to be a factor in the C. perfringens strain-specific electro-transformation protocol.     

Shuttle plasmids for Escherichia coli and Clostridium perfringens.

Small plasmids which replicate in both Escherichia coli and Clostridium perfringens were made by recombining E. coli plasmid pBR322 with three different small (less than 4 kilobases) plasmids native to C. perfringens. Subsequently, two homologous, though distinct, tetracycline resistance determinants (tet) from other C. perfringens plasmids were cloned into them. Both tet systems made E. coli resistant to at least 5 micrograms of tetracycline per ml when resident on the shuttle plasmids. The shuttle vectors have been used to transform L-phase variants and autoplasts of C. perfringens. In the latter case, the intact transforming plasmid could be isolated from walled cells after cell wall regeneration. Reciprocal transformation experiments in which plasmid DNAs derived from E. coli or C. perfringens were used suggest that restriction barriers exist between these two organisms. The plasmids contain restriction enzyme recognition sites in locations which are useful for cloning experiments.     

Electroporation-mediated transformation of lysostaphin-treated Clostridium perfringens

A reliable and efficient method has been developed for the electroporation-mediated transformation of Clostridium perfringens with plasmid DNA. Transformation of vegetative cells of C. perfringens strain 13 with the 7.9-kb Escherichia coli-C. perfringens shuttle plasmid pHR 106 required pretreatment with lysostaphin (2 to 20 micrograms/ml) for 1 h at 37 degrees C. Cells harvested early in the logarithmic stage of growth were transformed more efficiently than cells at other growth phases. The transformation frequency increased with the DNA concentration, to a saturating level at 5 to 10 micrograms DNA/ml. The transformation frequency was proportional to the field strength and time constant of the electroporation pulse; however, the field strength was a far more important parameter. A cell density between 1 x 10(8) and 5 x 10(8) cells/ml proved to be optimal for transformation. The procedure was capable of generating up to 3.0 x 10(5) transformants per micrograms DNA. The potential value of the method for the cloning of C. perfringens genes was demonstrated by the cloning of the clostridial tetracycline-resistance determinant, tetP, from the E. coli recombinant plasmid pJIR71, into C. perfringens strain 13.     

Construction and characterization of a phage-plasmid hybrid (phagemid), pCAK1, containing the replicative form of viruslike particle CAK1 isolated from Clostridium acetobutylicum NCIB 6444.

A bacteriophage-plasmid hybrid (phagemid) designated pCAK1 was constructed by ligating 5-kbp Escherichia coli plasmid pAK102 (AprEmr) and the 6.6-kbp HaeIII-linearized replicative form of the CAK1 viruslike particle from Clostridium acetobutylicum NCIB 6444. Phagemid pCAK1 (11.6 kbp) replicated via the ColE1 replication origin derived from pAK102 in E. coli. Single-stranded DNA (ssDNA) molecules complexed with protein in a manner which protected ssDNA from nucleases were recovered from the supernatant of E. coli DH11S transformants containing pCAK1 in the absence of cell lysis. This suggests that the viral-strand DNA synthesis replication origin of CAK1 and associated gene expression are functional in E. coli DH11S. The single-stranded form of pCAK1 isolated from E. coli supernatant was transformed into E. coli DH5 alpha' or DH11S by electroporation. Isolation of ampicillin-resistant E. coli transformants following transformation suggests that the complementary-strand DNA synthesis replication origin of CAK1 is also functional in E. coli. The coat proteins associated with ssDNA of pCAK1 demonstrated sensitivity to proteinase K and various solvents (i.e., phenol and chloroform), similar to the results obtained previously with CAK1. Following phagemid construction in E. coli, pCAK1 was transformed into C. acetobutylicum ATCC 824 and C. perfringens 13 by intact cell electroporation. Restriction enzyme analysis of pCAK1 isolated from erythromycin-resistant transformants of both C. acetobutylicum and C. perfringens suggested that it was identical to that present in E. coli transformants.     

谷氨酸棒杆菌/大肠杆菌穿梭型启动子探测载体构建

从质粒pXZ10145和pUC19出发,构建了一个谷氨酸棒杆菌/大肠杆菌穿梭载体pAK6。pAK6的大小为5684bp,带有卡那霉素和氨苄青霉素抗性选择标记,以及多克隆位点。在pAK6基础上,构建了以氯霉素乙酰转移酶为报告基因的启动子探测载体pAKC6,pAKC6的大小为6474bp。采用鸟枪法,将经Sau3AI消化的谷氨酸棒杆菌基因组片段连入pAKC6;根据谷氨酸棒杆菌对氯霉素的抗性,从中分离出两个具有启动子功能的插入片段。通过测定报告基因氯霉素乙酰转移酶的活性,对两个启动子片段在谷氨酸棒杆菌中的强度进行了初步的判断;测序后,用启动子预测软件对其结构进行了预测,证实了启动子序列的存在。     

Construction of a sequenced Clostridium perfringens-Escherichia coli shuttle plasmid.

A new Clostridium perfringens-Escherichia coli shuttle plasmid has been constructed and its complete DNA sequence compiled. The vector, pJIR418, contains the replication regions from the C. perfringens replicon pIP404 and the E. coli vector pUC18. The multiple cloning site and lacZ' gene from pUC18 are also present, which means that X-gal screening can be used to select recombinants in E. coli. Both chloramphenicol and erythromycin resistance can be selected in C. perfringens and E. coli since pJIR418 carries the C. perfringens catP and ermBP genes. Insertional inactivation of either the catP or ermBP genes can also be used to directly screen recombinants in both organisms. The versatility of pJIR418 and its applicability for the cloning of toxin genes from C. perfringens have been demonstrated by the manipulation of a cloned gene encoding the production of phospholipase C.     

Use of a shuttle vector for the transformation of the white rot basidiomycete, Phanerochaete chrysosporium

A novel shuttle vector based spheroplast transformation system for the lignin degrading filamentous fungus P. chrysosporium is described. The transformation vector, designated pRR12, consists of the yeast integration plasmid YIp5, a putative autonomous replication sequence (ars) of P. chrysosporium, and a 2.2 kb PvuII fragment carrying kanr determinant from plasmid pNG35, which confers resistance against both kanamycin and the related antibiotic G418. Two different strains of P. chrysosporium (ME446 and BKM-F) were transformed to G418 resistance using vector pRR12. Approximately 20 transformants per micrograms of vector DNA were obtained. The transforming vector pRR12 could be recovered from the total DNA of transformants by E. coli transformation, albeit at a low frequency.     

Plasmid transformation of Clostridium perfringens by electroporation methods

Two electroporation methods were compared and modified to improve the frequencies of transfer of plasmid DNA into Clostridium perfringens. A plasmid shuttle vector, pSB92A2, containing chloramphenicol and ampicillin resistance genes and a clostridial origin of replication isolated from a cryptic C. perfringens plasmid, was constructed and successfully introduced into C. perfringens by both electrotransformation methods. Modifications which improved frequencies by 15-28 fold are described and may improve frequencies sufficiently for some vector/host combinations to consider the future use of more direct cloning strategies for the clostridia.     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Transformation of Clostridium perfringens L forms with shuttle plasmid DNA.

L-form (L-phase) cultures of Clostridium perfringens were tested for their transformability with plasmid DNA. Three L-form strains were transformable, but one, strain L-13, was superior to the others. This strain was easily and reproducibly transformed with previously described shuttle vectors which were derived from either C. perfringens or Escherichia coli. Strain L-13 was transformable by a variety of methods, and a new micromethod worked well under both aerobic and anaerobic conditions. The maximal number of transformants was attained after strain L-13 was exposed for 4 h to the transforming DNA and polyethylene glycol. Viable counts determined in tubes of semisolid brain heart infusion medium containing 10% sucrose, with or without 2 micrograms of tetracycline per ml, showed a transformation rate of 3.9 X 10(-5) (transformants per viable cells).     

Construction of a hybrid plasmid capable of replication in Amycolatopsis mediterranei

A new plasmid, pA387, has been isolated from "Amycolatopsis sp." (DSM 43387). This plasmid could be isolated from liquid culture as well as mycelium from agar plates by a modified procedure. Plasmid pA387 is about 29.6 kb and can be cured at low frequency by protoplasting and ethidium bromide and heat treatment. Hybridization experiments showed that this plasmid is present in free form and does not integrate into the chromosome. A hybrid plasmid was constructed by cloning a 5.1-kb fragment of pA387 into the Escherichia coli vector pDM10. This hybrid plasmid, termed pRL1, could be transformed into Amycolatopsis mediterranei and A. orientalis by electroporation. A transformation frequency of 2.2 x 10(3) transformants per micrograms of DNA at 12.5 kV/cm and a pulse duration of 10.8 ms was obtained in A. mediterranei, whereas 1.1 x 10(5) transformants per microgram of DNA were obtained at a field strength of 7.5 kV/cm and a pulse duration of 7.6 ms in A. orientalis. Plasmid pRL1 is the first hybrid plasmid which could be used successfully for the transformation of A. mediterranei. The plasmid has a rather high copy number, is genetically stable, and can be easily reisolated from A. mediterranei. Plasmid pRL1 will be useful for further construction of a shuttle vector for E. coli and A. mediterranei and becomes the basis for the development of gene cloning techniques in Amycolatopsis spp.     

Construction of a hybrid plasmid capable of replication in Amycolatopsis mediterranei.

A new plasmid, pA387, has been isolated from "Amycolatopsis sp." (DSM 43387). This plasmid could be isolated from liquid culture as well as mycelium from agar plates by a modified procedure. Plasmid pA387 is about 29.6 kb and can be cured at low frequency by protoplasting and ethidium bromide and heat treatment. Hybridization experiments showed that this plasmid is present in free form and does not integrate into the chromosome. A hybrid plasmid was constructed by cloning a 5.1-kb fragment of pA387 into the Escherichia coli vector pDM10. This hybrid plasmid, termed pRL1, could be transformed into Amycolatopsis mediterranei and A. orientalis by electroporation. A transformation frequency of 2.2 x 10(3) transformants per micrograms of DNA at 12.5 kV/cm and a pulse duration of 10.8 ms was obtained in A. mediterranei, whereas 1.1 x 10(5) transformants per microgram of DNA were obtained at a field strength of 7.5 kV/cm and a pulse duration of 7.6 ms in A. orientalis. Plasmid pRL1 is the first hybrid plasmid which could be used successfully for the transformation of A. mediterranei. The plasmid has a rather high copy number, is genetically stable, and can be easily reisolated from A. mediterranei. Plasmid pRL1 will be useful for further construction of a shuttle vector for E. coli and A. mediterranei and becomes the basis for the development of gene cloning techniques in Amycolatopsis spp.     

Natural transformation in Campylobacter species.

Growing cells of Campylobacter coli and C. jejuni were naturally transformed by naked DNA without the requirement for any special treatment. Transformation frequencies for homologous chromosomal DNA were approximately 10(-3) transformants per recipient cell in C. coli and 10(-4) in C. jejuni. Maximum competence was found in the early log phase of growth. Campylobacters preferentially took up their own DNA in comparison with Escherichia coli chromosomal DNA, which was taken up very poorly. Three new Campylobacter spp.-to-E. coli shuttle plasmids, which contained additional cloning sites and selectable markers, were constructed from the shuttle vector pILL550A. These plasmid DNAs were taken up by campylobacters much less efficiently than was homologous chromosomal DNA, and transformation into plasmid-free cells was very rare. However, with the use of recipients containing a homologous plasmid, approximately 10(-4) transformants per cell were obtained. The tetM determinant, originally obtained from Streptococcus spp. and not heretofore reported in Campylobacter spp., was isolated from an E. coli plasmid and was introduced, selecting for tetracycline resistance, by natural transformation into C. coli.     

Worldwide distribution of the conjugative Clostridium perfringens tetracycline resistance plasmid, pCW3

The aim of this study was to test the hypothesis that all conjugative R-plasmids of Clostridium perfringens are closely related to the previously characterized tetracycline resistance plasmid, pCW3. Fourteen conjugative R-plasmids derived from 11 C. perfringens strains isolated in Australia, the United States, France, Belgium, and Japan were analyzed. Eleven of the plasmids encoded tetracycline resistance while three carried both tetracycline and chloramphenicol resistance. Each of these plasmids was compared, by restriction analysis, to the reference plasmid, pCW3. Seven of the tetracycline resistance plasmids had EcoRI, XbaI, and ClaI restriction profiles that were identical to those of the corresponding pCW3 digests. The seven remaining R-plasmids were different from pCW3. Comparison of partial restriction maps of these plasmids with a complete map of pCW3 indicated that they contained at least 17 kb of DNA that also was present in pCW3. Hybridization analysis confirmed that these plasmids shared substantial homology with pCW3. The three tetracycline and chloramphenicol resistance plasmids frequently lost a 6-kb chloramphenicol resistance segment during conjugation. Cloning experiments showed that the chloramphenicol resistance determinant was expressed in Escherichia coli and that the chloramphenicol resistance gene of one of these plasmids, pIP401, was contained within a 1.5-kb region of the 6-kb deletion segment. Hybridization analysis indicated that the deletion segment of pIP401 was related to those of the other two chloramphenicol resistance plasmids. During the course of this study, conjugative R-plasmids which appear to be identical to pCW3 or closely related to pCW3 were identified from C. perfringens strains from human, animal and environmental sources in five countries. It is concluded that C. perfringens strains in humans and animals throughout the world have overlapping gene pools and that all the conjugative C. perfringens R-plasmids examined probably evolved from a pCW3-like element.     

Protoplast transformation of Bacillus stearothermophilus NUB36 by plasmid DNA

An efficient protoplast transformation system was established for Bacillus stearothermophilus NUB3621 using thermophilic plasmid pTHT15 Tcr (4.5 kb) and mesophilic plasmid pLW05 Cmr (3 kb), a spontaneous deletion derivative of pPL401 Cmr Kmr. The efficiency of transformation of NUB3621 with pLW05 and pTHT15 was 2 x 10(7) to 4 x 10(8) transformants per micrograms DNA. The transformation frequency (transformants per regenerant) was 0.5 to 1.0. Chloramphenicol-resistant and tetracycline-resistant transformants were obtained when competent cells of Bacillus subtilis were transformed with pLW05 [2.5 x 10(5) transformants (microgram DNA)-1] and pTHT15 [1.8 x 10(5) transformants (micrograms DNA)-1], respectively. Thus, these plasmids are shuttle vectors for mesophilic and thermophilic bacilli. Plasmid pLW05 Cmr was not stably maintained in cultures growing at temperatures between 50 and 65 degrees C but the thermostable chloramphenicol acetyltransferase was active in vivo at temperatures up to 70 degrees C. In contrast, thermophilic plasmid pTHT15 Tcr was stable in cultures growing at temperatures up to 60 degrees C but the tetracycline resistance protein was relatively thermolabile at higher temperatures. The estimated copy number of pLW05 in cells of NUB3621 growing at 50, 60, and 65 degrees C was 69, 18, and 1 per chromosome equivalent, respectively. The estimated copy number of pTHT15 in cells of NUB3621 growing at 50 or 60 degrees C was about 41 to 45 per chromosome equivalent and 12 in cells growing at 65 degrees C.     

Insertion of transposon Tn9 into the spinal (Escherichia coli-Saccharomyces cerevisiae) plasmids and the expression of the prokaryotic gene of chloramphenicol resistance in yeast cells

Transposon Tn9 carrying camr gene which controls resistance to chloramphenicol has been introduced in vivo (in cells of Escherichia coli) into two chimeric shuttle plasmids pYF91 and YEp13. These plasmids consist of the different parts of the E. coli plasmid pBR322, the yeast 2mkm DNA plasmid and the yeast LEU2 structural gene. The plasmidis able to autonomously replicate in both yeast and bacterial cells. A recipient yeast strain carrying cams and leu2 markers was constructed to study the functional expression of the prokaryotic camr gene in eukaryotic yeast cells. The chimeric plasmids pYF91::Tn9 and YEp13::Tn9 were introduced into the yeast and bacterial recipient strains by transformation. The camr LEU2 yeast transformants were isolated. They were genetically unstable when grown on non-selective medium and they simultaneously lost camr and LEU2 markers with a frequency of 10 to 30%. The E. coli transformants were genetically stable under nonselective conditions and they maintain all plasmid markers. The chimeric plasmid pYF91::Tn9 was isolated from the yeast transformants and reintroduced into the cams leuB bacterial strain by transformation. The camr LEUB transformants were obtained. All these data confirm the possibility of the expression of the prokaryotic camr gene in yeast cells and present evidence for introduction of transposon Tn9 into chimeric plasmids.