SRTP协议在嵌入式远程监控系统中的应用

安全实时传输协议（SRTP）作为RTP协议的安全扩展协议,为RTP／RTCP流提供了一种安全机制——加密和消息认证。对SRTP协议进行了深入研究,详细描述了SRTP协议采用的AES—CM加密模式,以及分析了其相对于DES—CBC模式所具有的性能优势。为有效解决在网络视频监控系统中音视频数据传输的安全性问题,提出了基于SRTP协议的嵌入式远程网络监控系统中音视频数据实时安全传输的实现方法．     

基于iSCSI技术的流媒体存储系统研究

本文简要分析了视频监控领域流媒体存储的主要特点,提出了两种使用iSCSI协议实现实时流存储系统的结构,针对使用流媒体服务器的结构,进行了系统原型设计和实现,并对其性能进行了测试。测试结果表明,原型系统存储性能满足高清网络视频监控系统的需求。     

移动网络手机实时监控系统的设计与实现

通过分析动力环境实时监控系统的实际需求,结合移动网络、J2ME、Java媒体框架等技术,提出了一个基于移动网络的手机实时监控系统的设计方案.涵盖了图像监控和数字监控两条通道,实现了视频监控、监控数据实时查询、告警和控制命令等功能.针对图像监控通道中高实时性的要求,提出了双缓冲多线程图像捕捉、自缓冲输入流机制、双播放器播放模式等多个创新方法对系统进行优化.最后结合系统在动力环境监控系统中应用案例,表明了系统的可行性和可靠性,且系统具有较高的性能.     

面向TCP连接的网络实时监控系统及其连接阻断技术

介绍了一种面向TCP连接的网络实时监控系统RMCNS（a real-time monitoring and controlling network system to orient TCP connection)该系统的架构搭建在网络入侵监测系统函数库(Libnids)编程平台上，采用网络侦听方式监控攻击、实时高效的TCP协议还原、基于内容的攻击判定和面向TCP连接的实时阻断是RMCNS的主要特点，该文重点讨论了针对基于TCP连接的攻击实时响应的阻断技术，分别介绍了在标准TCP协议栈和非标准TCP协议栈网络环境下，RMCNS采用的阻断技术，为网络监控提出了新的方法。     

基于RTSP的流媒体视频服务器的设计与实现

描述了实时流协议RTSP（Real Time Streaming Protoco1）和相关流媒体协议的原理以及它们在IP单播或多播网络上的通信过程。在此基础上,进一步分析了RTSP／RTP流媒体视频服务器的设计原理和具体实现。最后,介绍了一个基于RTSP服务器开发的视频监控系统。     

基于ZigBee技术的医院供水管网水质监控系统

针对医院供水管网水质问题,设计了基于ZigBee无线传感器网络的水质实时监控系统。监控系统由末端的不同传感器采集水温、pH值、电导率水质参数,通过ZigBee无线网络传送给网关,网关实现ZigBee和TcP/IP协议间的转换后,将数据传送给监控中心进行存储、分析和处理,监控中心可发送命令控制整个网络。该方案不仅可以实现本地和远程水质实时监控,而且很容易应用于其他环境下的水质实时监控。     

CDMA无线通信在远程监控系统的应用

针对海上石油平台油井压力的实时监控,本文设计了基于CDMA无线通信的远程监控系统,提出了一个可以实现服务器和采集器之间1～N通信的协议,协议通过定时测试连接状态的方法减少了网络不稳定性对系统产生的影响,利用目标采集器的独有的名称而不是其动态的IP地址来识别目标,并且实现了差错控制。对协议性能的分析和现场实验都表明该系统达到了监控系统所要求的实时性和低误码率。     

即时通讯实时监测系统的设计与实现

针对目前即时通讯软件广泛使用带来的一系列网络信息安全问题,设计了一种基于 Libnids 开发的即时通讯实时监测系统.通过对广泛使用的 MSN 协议进行详细地分析,该系统首先利用 Libnids 实现数据捕获和 TCP 流重组,然后在MSN 会话连接建立时使用哈希动态链表保存会话信息,最后通过在数据传输阶段对单个数据包哈希匹配所属会话流实现了对监测网内部用户 MSN 账号和聊天信息的实时还原.测试表明该系统能够有效地实现对即时通讯的实时监测,达到维护网络信息安全的目的     

基于WSNs的设施农业环境远程监控系统设计

针对现有设施农业环境远程监控系统的不足,对其监控方案进行改进,将无线传感器网络和嵌入式技术相结合,设计了基于CC2530的传感器节点软硬件结构和基于S3C2440的嵌入式设备的软硬件结构。设计了基于改进蚁群算法的路由协议。实现了对监测区域的环境信息的实时、可靠地采集和传输。实验结果表明：该系统在实现传统监控功能的基础上能够提供给用户更直观的信息显示、具有移动监控的功能、系统的成本低并且网络能耗负载均衡。     

基于RTSP的视频自动传送控制系统的设计和实现

介绍了实时流化协议RTSP。实现了一个在IPv6网络上运行的基于实时流化协议RTSP的视频自动传送控制系统,该系统客户端按照设定的日程自动连接流服务器安现视频流的自动传送和播放。给出了系统设计和实现方法。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.