共查询到20条相似文献,搜索用时 93 毫秒
1.
摆动从动件凸轮廓线曲率半径的确定 总被引:7,自引:2,他引:5
摆动从动件盘形凸轮机构基本尺寸确定后 ,根据从动件的运动规律 ,在作出其廓线之前 ,采用图解法可方便地确定出凸轮廓线的曲率半径 ,本文介绍了这一方法 相似文献
2.
3.
本文介绍了直动滚子从动件盘形凸轮,直动平底从动件盘形凸轮,摆动滚子从动件盘形凸轮的计算机辅助设计方法,凸轮廓线图形的自动绘制及理论廓线最小曲率半径和最大压力角的确定。 相似文献
4.
5.
介绍了平底从动件凸轮廓线的形成原理,论述了在AutoCAD的基础上以CAD动画的新方法绘制平底从动件凸轮廓线的步骤和过程。 相似文献
6.
盘形凸轮廓线设计的通用公式 总被引:1,自引:1,他引:0
本文通过对凸轮廓线设计方法的研究,推导出了适用于具有不同运动形式和不同接触表面结构形式的从动件的各种盘形凸轮机构的凸轮廓线设计通用公式文末列表说明应用本公式设计凸轮廓线的详尽过程。 相似文献
7.
根据凸轮传动机构设计确定的凸轮参数 ,用解析法建立凸轮轮廓线方程 ,将凸轮设计及其数控编程 ,通过计算机辅助设计来完成 ,这一方法大大减少设计、加工的工作量、提高工作效率。微机程序适用于摆动从动件盘形凸轮 ,从动件加速度按正弦规律或余弦规律变化 ,程序分两部分完成 ,第一部分计算出凸轮轮廓线极坐标值 ,供凸轮设计使用 ,第二部分编制数控加工凸轮程序。 一、凸轮机构及设计要求凸轮机构工作原理 (见图 1) ,其设计要求为从动件运动规律为正弦加速度 (余弦加速度 )曲线 ,凸轮设计主要参数 :C为凸轮回转中心到摆杆中心的距离 ;L… 相似文献
8.
凸轮机构是一种应用很广泛的机构,凸轮轮廓线决定着从动件的运动规律,采用相对运动原理的作图方法设计图轮廓线,计算量大,精度低.本文介绍在pro/E系统中,利用相对运动原理模拟从动件的运动规律,通过对机构的运动过程进行分析,生成直动从动件凸轮机构的凸轮轮廓曲线的设计方法和过程. 相似文献
9.
在对摆动从动件圆柱凸轮工作过程进行分析的基础上,应用CimtranE软件对摆动从动件圆柱凸轮凹槽理论轮廓线进行“3D展开”,并对3D展开的轮廓线进行编程和加工,提出了一套有效的解决方案。 相似文献
10.
11.
In a recent paper, the Ritz method with simple algebraic polynomials as trial functions was used to obtain an eigenvalue equation for the free vibration of a class of homogeneous solids with cavities. The method presented is here extended to the study of a class of non-homogeneous solids, in which each solid is composed of a number of isotropic layers with different material properties. The Cartesian coordinate system is used to describe the geometry of the solid which is modelled by means of a segment bounded by the yz, zx and xy orthogonal coordinate planes and by two curved surfaces which are defined by fairly general polynomial expressions in the coordinates x, y and z. The surface representing the interface between two material layers in the solid is also described by a polynomial expression in the coordinates x, y and z. In order to demonstrate the accuracy of the approach, natural frequencies are given for both a two- and three-layered spherical shell and for a homogeneous hollow cylinder, as computed using the present approach, and are compared with those obtained using an exact solution. Results are then given for a number of two- and three-layered cylinders and, to demonstrate the versatility of the approach, natural frequencies are given for a five-layered cantilevered beam with a central circular hole as well as for a number of composite solids of more general shape. 相似文献
12.
13.
本文以某些积算和双笔记录仪产品为例说明由于仪表功能设计的不合理或选型不当,影响了仪表的正常使用,制造厂和用户应关注这类问题。 相似文献
14.
通过分析膨胀套在实际使用产生滑移受阻现象、卡死现象原因的实质,并在分析产生问题原因的基础上提出了改进措施即:增加导向机构。 相似文献
15.
16.
设计了磨粉机快辊轴承座的加工工艺和具体的工装夹具.利用卧式加工中心加工磨粉机快辊轴承座,辅以能够高效快速夹紧的夹具,既可以保证加工精度,又能够提高加工效率. 相似文献
17.
18.
Modern methods of implementation of the rule of positive gradient of mechanical properties are considered; this rule was formulated by I.V. Kragelskii and its application serves to minimize the friction and wear of solids. The given methods include the application of coatings with the method of finishing antifricton abrasion-free treatment; application of new metal-cladding lubricating materials; and creation of a nanostructural state of the surface iron nitride layer by nitriding steel with a positive gradient of hardness normal to the surface. 相似文献
19.
针对目前市场对工业设计人才的需求,本文论述了我校在工业设计教育方面的改革措施,着重介绍了我校工业设计教育在软件和硬件方面所进行的一系列的改革。 相似文献
20.
一种涡旋压缩机径向随变机构的设计 总被引:1,自引:0,他引:1
详细介绍了运用随变原理设计的一种新型径向密封机构的结构特点,工作原理及主要参数的确定方法,该机构可补偿由于涡旋体加工精度不高而造成的功率损失,适用于涡旋压缩机的批量生产。 相似文献