首页 | 官方网站   微博 | 高级检索  
     

钛基表面纳米羟基磷灰石涂层的电泳沉积
引用本文:陈菲,林昌健,王周成.钛基表面纳米羟基磷灰石涂层的电泳沉积[J].电化学,2005,11(1):67-71.
作者姓名:陈菲  林昌健  王周成
作者单位:厦门大学表面物理化学国家重点实验室,厦门大学表面物理化学国家重点实验室,厦门大学材料科学与工程系 厦门大学化学系,福建厦门361005 ,厦门大学化学系,福建厦门361005 ,福建厦门361005
基金项目:国家自然科学基金;国家高技术研究发展计划(863计划)
摘    要:应用沉淀法合成纳米羟基磷灰石,并以电泳沉积法在粗糙化的钛表面制备纳米结构的羟基磷灰石涂层.纳米涂层有利于保持羟基磷灰石的化学组成和结构,制备的涂层均匀并且无裂缝,烧结后涂层仍保持纳米结构,其烧结温度也明显降低。钛表面经化学处理后,可形成很多微孔和TiO2薄层,增强了涂层和基体之间的结合.涂层的结合力为 18±2. 5MPa,硬度和杨式模量分别为 32. 0和 2. 4GPa.

关 键 词:羟基磷灰石  纳米涂层  电泳沉积  
文章编号:1006-3471(2005)01-0067-05
收稿时间:2005-02-28
修稿时间:2004年4月7日

The Electrophoretic Deposition of Nano Hydroxyapatite Coating on Titanium Surface
CHEN Fei,LIN Chang-jian,WANG Zhou-cheng.The Electrophoretic Deposition of Nano Hydroxyapatite Coating on Titanium Surface[J].Electrochemistry,2005,11(1):67-71.
Authors:CHEN Fei  LIN Chang-jian  WANG Zhou-cheng
Abstract:A hydroxyapatite coating with nano-structure on the roughened titanium surface was prepared by electrophoretic deposition process. To decrease sintering temperature the HAp nanoparticles synthesizedby a wet chemical method was used. It is observed that the coating is uniform without cracks. After sintering the nano-strueture of HAp coating remains unchanged. The surface treatment of Ti is applied to form a distribution of small pits and TiO_2thin layer that improve the adhesion of coatingto Ti substrate. It is shown that the bonding strength of coating is as high as 18±2.5MPa. The hardness and Young's modulus are 40.6 and 0.42 GPa, respectively.
Keywords:Hydroxyapatite  Nano coating  Electrophoretic deposition  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《电化学》浏览原始摘要信息
点击此处可从《电化学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司    京ICP备09084417号-23

京公网安备 11010802026262号