Poly(p-phenylene terephthalamide) films formed from extrusion and coagulation of liquid crystalline sulphuric acid solutions: Characterization of orientation and void structure,annealing, and upgrading of film mechanical properties

Poly(p-phenylene terephthalamide) (PPD-T) films have been prepared by continuous extrusion of liquid crystalline 17 percent PPD-T/sulphuric acid solutions through an annular die followed by coagulation, Films extruded without drawdown exhibit some polymer chain orientation in the machine direction. This is increased by uniaxially drawing down films. Films produced with a lubricated conical mandrel sitting between the die and the coagulation bath exhibit an equal biaxial orientation. The uniaxially oriented films exhibit highly anisotropic mechanical properties, while the mandrel-produced film exhibits balanced properties. Heat treatment at 350°C results in significant enhancement of the tensile strength of the mandrel film. Void structures in the films have been investigated by mass density, scanning electron microscopy (SEM), and small-angle X-ray scattering (SAXS). Density measurement indicate a void content decreasing with decreasing film thickness and heat treatment. SEM locates micron-size voids in the thickest films, apparently caused by rapid coagulation. SAXS indicates much smaller void sixes which are roughly prolate ellipsoids (long axis in machine direction) for uniaxial films and oblate ellipsoids (short axis in thickness direction) for the mandrel produced films. Various techniques are used to estimate mean void size.