| 管件电磁成形中温度变化的模拟研究 |
| |
| 引用本文： | 何文治,莫健华,崔晓辉,王波.管件电磁成形中温度变化的模拟研究[J].电加工与模具,2011(1):32-36. |
| |
| 作者姓名： | 何文治 莫健华 崔晓辉 王波 |
| |
| 作者单位： | 华中科技大学材料成形与模具技术国家重点实验室; |
| |
| 基金项目： | 国家自然科学基金资助项目(50875093) |
| |
| 摘 要： | 管件电磁成形中,工件温度的变化会影响材料的电导率和塑性性能,从而影响工件的成形性能.利用有限元软件ANSYS,建立电路-电磁场和电磁场-温度场两种耦合模型,分析成形过程中管件温度变化、分布及其影响因素.模拟结果表明,在放电能量一定的条件下,管件温度变化值随放电电流频率的增加而升高,且在工件轴向和径向均存在温度梯度.
|
| 关 键 词： | 电磁成形 温度变化 电流频率 顺序耦合 |
Simulation of Temperature Evolution in the Process of Tube Electromagnetic Forming |
| |
| He Wenzhi,Mo Jianhua,Cui Xiaohui,Wang Bo.Simulation of Temperature Evolution in the Process of Tube Electromagnetic Forming[J].Electromachining & Mould,2011(1):32-36. |
| |
| Authors: | He Wenzhi Mo Jianhua Cui Xiaohui Wang Bo |
| |
| Affiliation: | He Wenzhi,Mo Jianhua,Cui Xiaohui,Wang Bo(Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | In the process of tube electromagnetic forming,material's plastic property and conductivity were varied as the change of temperature and then influence the formability of workpiece.In this paper,two coupled models,circuit-electromagnetic and electromagnetic-thermal,has been built in the FEA software ANSYS to analyze the change,distribution and influencing factors of temperature during the forming.The results show that value of tube's temperature is increase as the increase of charge current's frequency.Ther... |
| |
| Keywords: | electromagnetic forming temperature change current frequency sequential coupling |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
