| 针阀体喷孔脉冲电流电解去毛刺技术研究 |
| |
| 引用本文： | 诸跃进,朱音,冯青.针阀体喷孔脉冲电流电解去毛刺技术研究[J].电加工与模具,2011(1):49-54. |
| |
| 作者姓名： | 诸跃进 朱音 冯青 |
| |
| 作者单位： | 苏州科技大学电子学院;淄博中威电加工机床有限公司; |
| |
| 摘 要： | 在介绍针阀体喷孔去毛刺工艺方法的基础上,研究了针阀体喷孔脉冲电流电解去毛刺工艺和技术.采用该工艺对针阀体喷孔进行了倒圆实验和电解去毛刺效果流量测定.实验结果表明,经脉冲电流电解去毛刺后的针阀体较传统方法加工的针阀体喷孔流量明显提高,初始间隙较小时喷孔内入口处倒圆半径偏差明显减小.
|
| 关 键 词： | 针阀体喷孔 脉冲电流电解去毛刺 间隙 喷孔流量 |
Research on Technique of Pulse Electrochemical Deburring Machining for Injection Hole of Nozzle Holder |
| |
| Zhu Yuejin,Zhu Yin,Feng Qing.Research on Technique of Pulse Electrochemical Deburring Machining for Injection Hole of Nozzle Holder[J].Electromachining & Mould,2011(1):49-54. |
| |
| Authors: | Zhu Yuejin Zhu Yin Feng Qing |
| |
| Affiliation: | Zhu Yuejin1,Zhu Yin1,Feng Qing2(1.Suzhou University of Science and Technology,Suzhou 215011,China,2.Zibo Zhongwei Electromachining Machine Tool Co.Ltd.,Zibo 255100,China) |
| |
| Abstract: | Based on the introduction of deburring methods of injection hole of nozzle holder,the technique of pulse electrochemical deburring machining for injection hole of nozzle holder has been studied.The test of fluid flux of nozzle injection hole shows that the technique can effectively remove the burrs on the injection hole and regulate the corner radius of injection hole inlet.Furthermore,the experiment results indicate that the fluid flux of nozzle injection hole was increased obviously and the deviation of t... |
| |
| Keywords: | injection hole of nozzle holder pulse electrochemical deburring machining inter-electrode gap flux of nozzle injection hole |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
