基于ANSYS的钢管混凝土拱桥收缩徐变分析

的截面各组成部分 ,存在内力重分布的现象 ,即构件后浇部分混凝土的重量先作为一种荷载作用在已建成构件上 ,然后再与预制或现浇部分形成组合截面 ,钢管混凝土构件就是这样的一种典型构件 2 ] 。为了反映实际桥梁结构的施工过程 ,必须采用一种能够真实描述结构及构件截面形成过程的计算方法 ,以确保整个桥梁结构在施工过程及运营阶段的安全可靠。在结构分析中 ,把由不同时间或不同材料形成的构件截面各部分描述成不同的层 ,构件的截面几何特性根据实际情况采用以下方法处理 3 ] :抗压刚度 :EA =∑ni=1Ei Ai ,(1)组合截面形心位置 :y =∑…

Analysis of the Creep and Shinkage of Concrete in CFST Arch Bridge Based on ANSYS

In this paper,a general finite-element software is used to calculate the creep and shrinkage of concrete in CFST arch bridge. The bridge's spatial model is founded. The cross-section stress redistribution of the arch ribs is researched. The analysis results show that the creep and shrinkage has a great influence upon the structure forces and the stress of any controlled cross-section. The cross-stress redistribution is very obvious. The creep and shrinkage of concrete has little influence upon the structure axial force,but has a great influence upon the bending moment,The forces and the stress of the steel tube have been increased but those of the concrete have been reduced because of the creep and shrinkage. The bending moment of the top of the arch has increased obviously. Engineers should be careful about this phenomenon.