| 铸造铝铅滑动轴承合金的制备及其显微组织 |
| |
| 引用本文： | 孙大仁,杨晓红,张明喆,曹占义,陆有,刘勇兵.铸造铝铅滑动轴承合金的制备及其显微组织[J].特种铸造及有色合金,1998(5):24-26. |
| |
| 作者姓名： | 孙大仁 杨晓红 张明喆 曹占义 陆有 刘勇兵 |
| |
| 作者单位： | 吉林工业大学 |
| |
| 摘 要： | 利用一种新的铸造技术，使高达４０％的铅混合到铝合金中，然后用普通的浇铸方法生产铸造铝－铅合金。在实验中，探讨了其最佳工艺参数，并利用光学显微镜，扫描电镜，定量金相等技术研究了铝含量和合金元素对其显微组织结构的影响。
|
| 关 键 词： | 铝铅合金 铸造 滑动轴承 |
| 修稿时间： | 1998-02-18 |
Fabrication and Microstructure of Casting Al-Pb Sliding Bearing Alloy |
| |
| Sun Daren,Yang Xiaohong,Zhang Mingzhe,Cao Zhanyi,Lu You,Liu Yongbing.Fabrication and Microstructure of Casting Al-Pb Sliding Bearing Alloy[J].Special Casting & Nonferrous Alloys,1998(5):24-26. |
| |
| Authors: | Sun Daren Yang Xiaohong Zhang Mingzhe Cao Zhanyi Lu You Liu Yongbing |
| |
| Affiliation: | Jilin University of Technology |
| |
| Abstract: | In this study, A new foundry technique has been developed in which up to 40% lead can be delivered into the molten aluminium alloy, followed by the alloy pouring with the conventional casting method. The process parameters were investigated. The effects of the lead content and the alloy elements on the microstructures of Al Pb alloy were discussed based on the results of optical microscope, SEM and quantitative metallography observations. |
| |
| Keywords: | Aluminium Lead Alloy Cast Sliding Bearing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
